Hey there folks. I should probably preface this whole thing by letting everyone know that I have successfully SBF'd my DX2 in the past a few times, but most recently I keep getting an error in the middle of the process. Sine I've disconnected the phone after that error message, it's basically just been a brick. I've repeated the process a few times and I continue to get error messages at the same point in the process.
I also looked on the web and downloaded a new version of RSD Lite (5.4.4) and tried it with that version with still the same results. Originally I had decided to SBF in the first place because I had flashed the CM10A3 mod to my phone and there were all kinds of bugs making the phone unusable for that OS. I attempted to reflash something else (like the CM7.2 that I had running on it flawlessly) but the verbiage for that ROM said I needed to start from GB2.3.4, so I was afraid to go straight to CM10 from CM7. Admittedly, I am a little confused as to whether all new mods can only be flashed from GB2.3.4 or if it's okay to go directly from one mod to another, so a little advice there would be appreciated too......
So....is this thing savable???
Thanks in advance,
Scott
DX2 ezSBF
link in my list
sd_shadow's [Collection] of Links for Droid X2
Sent from my XT862 using xda premium
sd_shadow said:
DX2 ezSBF
link in my list
sd_shadow's [Collection] of Links for Droid X2[/URL]
Sent from my XT862 using xda premium
Click to expand...
Click to collapse
Hey Shadow....thanks for the advice as well as the great work on putting together the Linux-based SBF tool. I tried it and everything was going smoothly until it started to flash and very early on I got an error message:
"Uploading RDL03 failed 00080000/00300000
!! failed"
Any ideas??
sounds like hardware failure.
may not be fixable.
you can keep trying to flash the sbf with rsd lite or ezSBF
or you could try flashing the boot.img with moto-fastboot.exe
I'll post some links
Sent from my XT862 using xda premium
---------- Post added at 12:31 PM ---------- Previous post was at 11:36 AM ----------
read SBF "ACTUALLY" Fails... Need help with ADB fastboot
seems like same error
download moto-fastboot.exe and DX2 boot.img
move to a folder like c/root
and unzip both
boot DX2 to fastboot
a. Pull the battery.
b. Plug the battery back in.
c. Power up your phone by pressing and holding the VOLUME DOWN BUTTON and then pressing the POWER BUTTON until you see the words FASTBOOT (in white) at the top of the DX2’s screen. This should only take about 3-5 seconds
d. e. Press the VOLUME UP BUTTON and the screen will say Starting Fastboot protocol support, when you see that phone is ready
Open the CMD, (Start/all programs/accessories/command prompt and enter the these commands.
cd/
cd c:root
moto-fastboot.exe flash boot boot.img
So I flashed the boot.img via your instructions and everything seemed to go fine so I tried the ezSBF method but it failed again. I also tried to SBF via RSD Lite to see if that would work but it failed also. Clearly there was some king of progress though because this time I got 29% of the way thru the flashing process as opposed to only 4% like before flashing the boot.img.
Frustrated!!
try a different version of rsd lite
5.5.4 isn't that new
---------- Post added at 05:39 PM ---------- Previous post was at 05:36 PM ----------
don't know when 5.5.4 came out, but 5.6 has been out since November 2011,
sd_shadow said:
try a different version of rsd lite
5.5.4 isn't that new
---------- Post added at 05:39 PM ---------- Previous post was at 05:36 PM ----------
don't know when 5.5.4 came out, but 5.6 has been out since November 2011,
Click to expand...
Click to collapse
Gotchya....will do!! I understand that the SBF process can be a bit finicky with USB cables too....I'll try a different one of those too. Thank you for your input!
Related
Yes, while I understand there have been many threads in regards to RSD Lite not recognizing phones, hear me out as none of them have been helpful to me. I recently got into the world of rooting and flashing roms, so like a fool yesterday I flashed Eclipse v.1 over 2.3.3. Ever since I have been experience the wifi connectivity issue, so reasonably I tried to use RSD lite to get the 2.3.4 sbf onto my X2. However, using RSD 4.5.3 I kept getting a status message along the lines of "chipset type 53 is not supported." Trying it again also with the 2.3.3 sbf, I tried using RSD v.4.9 and 5.3.1, however neither would recognize my phone. Now I am beginning to encounter other issues with Eclipse (my own fault) and I would greatly appreciate any input. All drivers are up to date for anyone who was going to throw that out again.
Be sure the machine you are running rsd on has plenty of disk space.
I got wierd errors a while back when i was running next to full on the HD RSD makes a temporary file before it flashes.
mastafunk said:
Be sure the machine you are running rsd on has plenty of disk space.
I got wierd errors a while back when i was running next to full on the HD RSD makes a temporary file before it flashes.
Click to expand...
Click to collapse
I have more than enough HD space. When running 4.5.3 it has the chipset error as the device status when paired with any sbf.
Are you running RSD as administrator? Maybe that could be a problem but i dont know.
If you are rooted and have installed system recovery try and flash the 2.3.4 zip aligned update in recovery and see if that works
Sent from my DROID X2 using XDA App
phillyo2 said:
Are you running RSD as administrator? Maybe that could be a problem but i dont know.
Click to expand...
Click to collapse
Just tried both ways in 4.9, neither were successful
It might be quicker if you enumerated, step-by-step, how you last sbf'ed ... that way, the more experienced amongst us can determine where you went wrong.
Oh, and throw in details on your computer's OS, too ... I hear there have been some problems using RSD Lite with Windows 7.
Pj
Phoenix, AZ
pdinphx said:
It might be quicker if you enumerated, step-by-step, how you last sbf'ed ... that way, the more experienced amongst us can determine where you went wrong.
Oh, and throw in details on your computer's OS, too ... I hear there have been some problems using RSD Lite with Windows 7.
Pj
Phoenix, AZ
Click to expand...
Click to collapse
I attempted to sbf based on the standard method from what I've seen in threads: run RSD (various versions were attempted), select the sbf, start the RSD protocol on my phone THEN plug it into the usb, and so on.
brossma1 said:
If you are rooted and have installed system recovery try and flash the 2.3.4 zip aligned update in recovery and see if that works
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
Just tried that, 2.3.3 isn't showing up when booting and 2.3.4 gets aborted due to signature verification failure or something along those lines.
I am curious as to what is meant by flash 2.3.4 zip aligned update?
---------- Post added at 10:32 PM ---------- Previous post was at 10:28 PM ----------
Also have u tried a factory reset from STOCK recovery? Not the bootstrap...STOCK...
Then see if rsd works
Aldo what method are u using to get to rsd protocol mode?
do u hold power and volume up? ((This is how I do it))
U can also find it with power and vol down then scroll down after u see dastboot on top...try both ways
I know I have had a couple timed where it took a few minutes for rsdlite to actually see my phone ...think it was trying to auto install drivers....
U try uninstallin moto drivers and reinstall? Something go wacky?
I use rsdlite 5.4.4 by the way
Astrotard Jones said:
Just tried that, 2.3.3 isn't showing up when booting and 2.3.4 gets aborted due to signature verification failure or something along those lines.
Click to expand...
Click to collapse
Signature verification sounds like the file corrupted. Try redownloading the sbf file through Firefox or chrome and unzip the file with 7zip.
Sent from my DROID X2 using XDA App
ashclepdia said:
I am curious as to what is meant by flash 2.3.4 zip aligned update?
---------- Post added at 10:32 PM ---------- Previous post was at 10:28 PM ----------
Also have u tried a factory reset from STOCK recovery? Not the bootstrap...STOCK...
Then see if rsd works
Aldo what method are u using to get to rsd protocol mode?
do u hold power and volume up? ((This is how I do it))
U can also find it with power and vol down then scroll down after u see dastboot on top...try both ways
I know I have had a couple timed where it took a few minutes for rsdlite to actually see my phone ...think it was trying to auto install drivers....
U try uninstallin moto drivers and reinstall? Something go wacky?
I use rsdlite 5.4.4 by the way
Click to expand...
Click to collapse
I have tried both methods of recovery, bootstrap and stock as well as the power+ vol up method and the method of accessing the RSD protocol through the vol down boot method. I have also tried reinstalling drivers as well. I also don't believe time was an issue with RSDlite as I gave each version a good 20 minutes to try to recognize my phone (excluding 4.5).
EvilTim said:
Signature verification sounds like the file corrupted. Try redownloading the sbf file through Firefox or chrome and unzip the file with 7zip.
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
I will try that, I have yet to try 7zip. Also when I try to access the 2.3.3 sbf zip file from recovery it does not show up as an option.
The versions of RSD you are using are older, I've been using 5.5 without any issues. If the phone is not being recognized it could be a driver issue on your windows machine. My older computer cannot recognize my phone i think the USB is 1.0.
Use version 5.x.x and higher...
Sent from my DROID BIONIC using xda premium
Astrotard Jones said:
I have tried both methods of recovery, bootstrap and stock as well as the power+ vol up method and the method of accessing the RSD protocol through the vol down boot method. I have also tried reinstalling drivers as well. I also don't believe time was an issue with RSDlite as I gave each version a good 20 minutes to try to recognize my phone (excluding 4.5).
I will try that, I have yet to try 7zip. Also when I try to access the 2.3.3 sbf zip file from recovery it does not show up as an option.
Click to expand...
Click to collapse
U r not supposed to flash the sbf zip from recovery.
u should have all the files on ye computer
Other things to try if still stuck:
try rsd 5.3.1 its what I always use.
Try plugging in to a port in the back of the computer.
Try run as administrator when you start rsd lite
Read the tutorial in the android dev subforum, its in the sticky post.
Sent from my DROID X2 using XDA App
EvilTim said:
Other things to try if still stuck:
try rsd 5.3.1 its what I always use.
Try plugging in to a port in the back of the computer.
Try run as administrator when you start rsd lite
Read the tutorial in the android dev subforum, its in the sticky post.
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
Also make sure correct Motorola drivers installed((different ones for 32bit and 64bit computer))
Try uninstall and reinstall drivers.
Kill all internet connection ((saw someone say before this was causing problems somehow...worth a shot..I think it had to do with when installing drivers it was doing something to find other drivers..not to sure but.couldn't hurt to try))
Maybe even just try a different computer all together ..
ashclepdia said:
Maybe even just try a different computer all together ..
Click to expand...
Click to collapse
agreed try another computer
hamburgerman said:
The versions of RSD you are using are older, I've been using 5.5 without any issues. If the phone is not being recognized it could be a driver issue on your windows machine. My older computer cannot recognize my phone i think the USB is 1.0.
Click to expand...
Click to collapse
I just reinstalled the drivers and tried 5.5, it didn't work sadly enough. Also, to every post under the quoted one; please read the thread before you throw out "advice."
Astrotard Jones said:
to every post under the quoted one; please read the thread before you throw out "advice."
Click to expand...
Click to collapse
No one read your whole post because you obviously didn't read the tutorial before you messed with your phone. So next time before you attempt to do something you clearly have no information on, read about it first. And instead of being a tool, thank us for at least TRYING to help you.
Sent from my DROID X2 using XDA App
ok so i have a 2 day old atrix 4g...i rooted but didnt unlock the bootloader. I was trying the pudding method of flashing the sbf file with preroot but got a screen saying "Failed to boot 0x1000" but comes up with a menu saying no os detected, going to rsd mode and then gives a whole bunch of options including fastboot. is there anyway to fix this? like i said the device isnt unlocked, i have read people getting this menu and flashing cwm but dont you have to have an unlocked bootloader for this? please help! if i cant get it fixed im gonna try to bring it into best buy for a new one.
rsd mode
flash sbf
profit?
---------- Post added at 11:51 PM ---------- Previous post was at 11:48 PM ----------
one of these sbf files
http://forum.xda-developers.com/showthread.php?t=1125944
garrett_tx said:
rsd mode
flash sbf
profit?
Click to expand...
Click to collapse
already tried...it goes through half of the process and when rsdlite reboots the phone it goes back to same screen...i think i may have got it figured out though, i unlocked the phone through fastboot and am then gonna put cwm on and flash a rom and see how it goes, thanks for the reply though!
no problem
and good luck! and happy flashing!
Look here:
http://forum.xda-developers.com/showthread.php?t=1160408
In the future, search is your friend.
Sent from my MB860 using Tapatalk
don't worry ! this isn't a hard brick. i had the same problem when i got my second atrix but i can't remember what i did :/
Here's your solution:
http://forum.xda-developers.com/showthread.php?t=1182871
_Dennis_ said:
Look here:
http://forum.xda-developers.com/showthread.php?t=1160408
In the future, search is your friend.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
actually i did use the search, thanks for that....and it definitely wasnt a hard brick, i unlocked the device through fastboot and then ran the one-click fastboot restore to recover from bootloop or softbrick, worked like a champ! thanks for all the help, and for reminding me to use the search feature.... lol
Guys
Sorry for a new thread, but have trawled through all posts and not found one post relating to the problem I have with my XT910 Razr
I upgraded to T-Mobile leak successfully. Then the new OTA generic Europe appeared. I followed other guidelines that other users had tried and succeeded with - that is flash the boot_new.img and the system_signed from the correct SBF according to posts (which if I hadn't had the correct SBF system, would've given me a message that others have had - so I know, well - think, I have the correct one as . . .
However, and this has been doing my head in now for 2 days, I get this message
Verifying current system
assert failed: apply_patch_check
("MTD:boot:8388608:5fff8425560eb1002b467062de2b355b45090ad7:838
8608:2997ddb421e1d44b026410339e343f60b3bb65bd")
E:Error in /tmp/sideload/package.zip
(Status 7)
. . . etc
Now I have data wiped, cache wiped over and over again. I have a feeling it's to do with the boot_new.img posted - oh damn, don't tell me it's a CDMA patch that I've applied to GSM (maybe too much sun in England at the moment)
Anyway, first post on here after being a member for around 6 years and I am at my wits end.
If anyone could help it would be extremely appeciated
Cheers, in advance
Gazblade said:
Guys
Sorry for a new thread, but have trawled through all posts and not found one post relating to the problem I have with my XT910 Razr
I upgraded to T-Mobile leak successfully. Then the new OTA generic Europe appeared. I followed other guidelines that other users had tried and succeeded with - that is flash the boot_new.img and the system_signed from the correct SBF according to posts (which if I hadn't had the correct SBF system, would've given me a message that others have had - so I know, well - think, I have the correct one as . . .
However, and this has been doing my head in now for 2 days, I get this message
Verifying current system
assert failed: apply_patch_check
("MTD:boot:8388608:5fff8425560eb1002b467062de2b355b45090ad7:838
8608:2997ddb421e1d44b026410339e343f60b3bb65bd")
E:Error in /tmp/sideload/package.zip
(Status 7)
. . . etc
Now I have data wiped, cache wiped over and over again. I have a feeling it's to do with the boot_new.img posted - oh damn, don't tell me it's a CDMA patch that I've applied to GSM (maybe too much sun in England at the moment)
Anyway, first post on here after being a member for around 6 years and I am at my wits end.
If anyone could help it would be extremely appeciated
Cheers, in advance
Click to expand...
Click to collapse
Looks like you're trying to flash an ICS update from wrong GB.
What's the GB version you are updating from? And whats the version you're trying to flash?
Cheers
Just to be sure you got the right System_signed I'll post it again
http://sbf.droid-developers.org/umt...USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
No other would work!
And this is the boot.img I've used to upgrade
http://www.mediafire.com/?rh4flyvuo5lej9w
Gesendet von meinem XT910 mit Tapatalk 2
Thanks for quick reply HSD.
Unfortunately I have also used the boot.img and also system_signed from the links you've posted.
When I've done that (applied that boot and system) and then applied the OTA (xt910_ics_4.0.4_for 2_3_6_en_eu_retail_ota_b731.zip) it doesn't even get as far as the post above - fails on update package check
Then I read another post that used
SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
and flashed boot_new.img and system_signed (from the extract) and have got further.
And the previous error is now what I get.
The error using the M2-3 (link you've posted) is different. Says something along the lines of wrong build.prop
I would post the error but, unfortunately as my phone is currently bricked, I am charging on BP Tools.
Is there any way of flashing the boot_signed and overwrite the current one using ADB or motofastboot/eprj. I've tried and just get a Preflash error
I think i know what kind of error you mean. We got an couple of bricked phones in Germany allready. Saved some of them, but 2 Guys would stay bricked until there's a working Fastboot for ICS.
---------- Post added at 01:30 AM ---------- Previous post was at 01:28 AM ----------
Gazblade said:
Is there any way of flashing the boot_signed and overwrite the current one using ADB or motofastboot/eprj. I've tried and just get a Preflash error
Click to expand...
Click to collapse
How do you flash the files?
---------- Post added at 01:35 AM ---------- Previous post was at 01:30 AM ----------
Put the Files of the eprj-mfastboot (3 Files), the system signed and the boot_new.img on your desktop.
Then hit the Startbutton on windows and search for > cmd <
open it an write this commands (every line confirm with ENTER)
cd desktop
eprj-mfastboot flash boot boot_new.img
eprj-mfastboot flash system system_signed
(I use Windows 7 for this)
I've tried various ways. Standard adb fastboot, moto-fastboot, eprj-mfastboot
Same with each
. . . . flash boot boot_new.img
. . . . flash system system_signed
Then wipe data/factory reset and then recovery mode the OTA
I've even even edited the xml file in the extracted SBF so the _signed files that don't work are deleted and then ran RSD Lite with the edited SBF again - and I've also done that with Eternity's alternative flash method.
No joy with any!
Been trying for 2 and a half days now and I wouldn't be so frantic if I didn't work for myself and this is my contact number for customers!!
Hurry up and release the SBFs Moto! Although I am concerned that the boot_new.img that I've applied has screwed things up!
And your last post is the last thing I've tried.
As you've said
Put the Files of the eprj-mfastboot (3 Files), the system signed and the boot_new.img on your desktop.
Then hit the Startbutton on windows and search for > cmd <
open it an write this commands (every line confirm with ENTER)
cd desktop
eprj-mfastboot flash boot boot_new.img
eprj-mfastboot flash system system_signed
Done that and no joy. I'm wondering if I've got the correct OTA downloaded?
I think you've maybe tried to much, like the Guys here in Germany.
Unfortunately we can't do an clean flash at the moment and in Germany ICS would not released untill the Maxx is in Store (end of June). That're the latest news i've read.
I have to ask this now (experience from the last days ):
You unpacked the two Parts of the new Leak to got the right Update.zip and you're sure, that you got it on your SD and doesn't try to flash the T-Mobile Leak again?
---------- Post added at 01:57 AM ---------- Previous post was at 01:54 AM ----------
Blur_Version.651.167.26.XT910.Retail.en.EU.part1.rar
Blur_Version.651.167.26.XT910.Retail.en.EU.part2.rar
That's the new Leak!
Two parts? I thought there was three from mediafire? Unrared all three. Is there another version I've not actually seen in the posts?
And the t-mobile is not on the SD card, so yes am flashing, well what I at least consider, the correct one (ends in b6371.zip?)
und vielen Dank soweit Freund
Downloading now thanks. Will let you know in oh, about 7 minutes apparently!
HSD-Pilot said:
I think you've maybe tried to much, like the Guys here in Germany.
Unfortunately we can't do an clean flash at the moment and in Germany ICS would not released untill the Maxx is in Store (end of June). That're the latest news i've read.
I have to ask this now (experience from the last days ):
You unpacked the two Parts of the new Leak to got the right Update.zip and you're sure, that you got it on your SD and doesn't try to flash the T-Mobile Leak again?
---------- Post added at 01:57 AM ---------- Previous post was at 01:54 AM ----------
LOL
That's the new Leak!
---------- Post added at 01:59 AM ---------- Previous post was at 01:57 AM ----------
Told me, when you got it. I'll delete the links after that
Click to expand...
Click to collapse
arent those my links?
And this should be done with the SBF you posted earlier?
Got them thanks
Now to give it a go
leisures said:
arent those my links?
Click to expand...
Click to collapse
NOOOOOO
---------- Post added at 02:17 AM ---------- Previous post was at 02:15 AM ----------
Gazblade said:
And this should be done with the SBF you posted earlier?
Click to expand...
Click to collapse
Yes!
---------- Post added at 02:20 AM ---------- Previous post was at 02:17 AM ----------
Should i let them in or delete them...That's the big question.
Have seen to many bricked Devices in the last days (I can't delete the Quote anyway so happy flashing )
HSD-Pilot said:
NOOOOOO
---------- Post added at 02:17 AM ---------- Previous post was at 02:15 AM ----------
Yes!
---------- Post added at 02:20 AM ---------- Previous post was at 02:17 AM ----------
Should i let them in or delete them...That's the big question.
Have seen to many bricked Devices in the last days (I can't delete the Quote anyway so happy flashing )
Click to expand...
Click to collapse
ok ok i can block the files from my mediafire acc anyway, want me to do it?
Let them in. I think the people now know about the risks by flashing this Leak.
And your Links are posted all over the world, so don't make people unhappy
I'm out now.
02:30am and to much Diablo III today.
See Ya
So far so good. Looks like my fault in downloading wrong OTA.
You are a God Send (if I wasn't an atheist!). I owe you a big, big favour HSD.
Thank you very, very much my friend
HSD-Pilot said:
Let them in. I think the people now know about the risks by flashing this Leak.
And your Links are posted all over the world, so don't make people unhappy
I'm out now.
02:30am and to much Diablo III today.
See Ya
Click to expand...
Click to collapse
what i found funny is that the link for the part1 has been downloaded 351 times and part2 1806.....who download only part2???
I am having serious problems rooting. My fastboot does not seem to work with anything. It all started when I flashed the latest firmware through RSD lite. Any advice. Matt's utility does not work - none of the options.
I am in
AP Fastboot Flash Mode (s)
0A:74
Device is Locked. Stauts Code: 0
Battery OK
OK to program
Transfer Mode:
USB Connected
Trying to flash
Filename: VRZ_XT912_6.7.2-180_DHD-16_M4-31_CFC.xml
Creation Date: 06/14/2012 19:11:24
File size: 2137
Sofware Version: 6.7.2-180_DHD-16_M4-31
For Phone Model: SPYDER
But every time I try to flash on step 14 of 21 I get a failure message and now I am stuck in fastboot - it will not power off or restart
andrewrvincent said:
I am having serious problems rooting. My fastboot does not seem to work with anything. It all started when I flashed the latest firmware through RSD lite. Any advice. Matt's utility does not work - none of the options.
Click to expand...
Click to collapse
You're using the xt912?? Matt's utility works flawlessly if the instructions are followed. I hate to say it but you must be doing something wrong. Are you just trying to root or are you trying to flash stock? If you are having problems after a previous RSD flash then i would try and fastboot back completely stock with data wipe using his utility. Are you putting the phone into fastboot mode? Try a different PC if you're sure you have the device in fastboot mode and you extracted the contents of the zip properly. If not, you should try and post screen shots or describe where the failure is occuring.
---------- Post added at 06:02 PM ---------- Previous post was at 05:55 PM ----------
andrewrvincent said:
I am in
AP Fastboot Flash Mode (s)
0A:74
Device is Locked. Stauts Code: 0
Battery OK
OK to program
Transfer Mode:
USB Connected
Trying to flash
Filename: VRZ_XT912_6.7.2-180_DHD-16_M4-31_CFC.xml
Creation Date: 06/14/2012 19:11:24
File size: 2137
Sofware Version: 6.7.2-180_DHD-16_M4-31
For Phone Model: SPYDER
But every time I try to flash on step 14 of 21 I get a failure message and now I am stuck in fastboot - it will not power off or restart
Click to expand...
Click to collapse
I don't have my laptop with me to verify, but im pretty sure you're using an older version of the utility. The filenames you posted are ICS i think. It should be this one. http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
You are my hero day - I forgot to extract the zip files - basic stuff - but I overlooked it. No wonder it keep saying file does not exist.
I was on verizon's site looking for a new phone. You just saved me some serious cash.
Thank you
I spoke too soon - I am still having issues.
It goes through the whole flash process and says the phone will reboot but the phone says "recipe failure" at the top by flash mode.
Is there a way to go back even further with this?
I tried flashing the latest firmware via rsd lite and the flash failed at step 14 of 21.
It seems hopeless right now
Well you don't want to go back. You tried to flash current firmware, the only direction we go from here is forward. What were you on prior to doing update? ICS? JB xmas leak? Which one of Matts utilities are you using? Go to the link at the bottom of my last post. Is that the same utility that you're using? Not DROID RAZR UTILITY 1.82 or 1.90 but DROID RAZR Utility XT912 Jellybean. I've used this utility to fastboot JB from a stock GB Razr without issues. If all of the above has been verified then redownload the utility and retry. If that fails, try a different computer and if that fails..... send it to me.
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 08:53 PM ---------- Previous post was at 08:47 PM ----------
It seems that way. Lol but its not. You can't really hard brick a Razr. Give ^^^^^ a try and report back.
Sent from my SCH-I535 using Tapatalk 2
I am on the latest utility - I went to the link you provided and downloaded it again just to be sure but no luck.
Here is where I stand - I was on JB through dual-boot option but then flashed the latest firmware directly using RSD Lite, not Matt's utility. Doing this caused me to lose root and I hate all the boat and ads so I really wanted to get root back. I then tried Matt's utility - but forgot the basic step of extracting, I let RSD extract and flash. I then had some failure issues since it could not locate the files I failed to extract. I then managed to get stuck in AP Fastboot somehow - I can not get out of it. The last time I tried the utility, after extracting it, the top of my phone stated "recipe failure." I also tried to flash the latest firmware through RSD but it stops on stop 14 out of 21 and merely states "failed"
By "go further back" I mean is there some way to flash something other than firmware?
I am not a developer but have been rooting and flashing ever since I got my original droid ages ago. I am not a magician with these devices but I normally manage to make do what I set out to do - but now I am stumped.
Any help would be appreciated - I just reactivated my OG Droid so I have service but that old thing is 3G and the screen is tiny - I like my RAZR an want to get it back up and running. I am going to hold off on trying anything else until I get a clear idea of how to proceed. I remember doing something once with ADB but I am not sure if it was a bricked Atrix I fixed for a co-worker or if it was the RAZR - I tend to do these things late at night in a sleep deprived haze so my memory is not very clear on that.
Thanks
I am trying fresh downloads of everything - start from scratch. If anyone has a better idea please let me know.
Thanks
Try another computer if it still fails.
Sent from my SCH-I535 using Tapatalk 2
I tried another computer with fresh downloads and still getting same failures.
Any ideas?
Alright I will try to keep this some what short. I gave my X2 to my younger brother a while ago. At the time I think it was running CM 10, I can't remember for sure. I know it was 4.0+ though. He was having some errors popping up so one weekend I was home I was just going to reflash the ROM I had on there. So, that's what I thought I did. Tried to boot after install and would not go. I was not as familiar with SBFing and the likes so if I remember correctly I think I just tried to factory reset from recovery. After this I don't really remember what I did, but I do know it has not turned on since.
I just pulled it out again today and I am unable to do anything but boot into recovery. I can't boot into Fastboot to push files (just stays at Starting Fastboot protocol support). I can not get my computer to recognize the device at all (fastboot or adb). Even if there was a way to use RSD Lite I wouldn't be able to because RSD won't recognize devices either (I'm on Windows 8.1, have heard there is problems). What I do have though is an SD card and another Droid 3 that I can use to get files onto the SD card. Are there files that I can install directly off of the SD card in recovery mode that may be able to help me? I am pretty sure that the device is still on 4.(something) if that makes any difference. Sorry if this is confusing and thanks for any help.
Not sure about status on moto drivers for win 8.1
I would install divers installer from moto site
Link in my main page under divers issues sd_shadow's list of links for Droid FAQs, SBF, Rooting, ROMs....
Install drivers, reboot pc, then connect dx2, check win device manager for errors/unknown devices
This is for a dx2 for verizon network?
Sent from my XT862 using Tapatalk
---------- Post added at 11:03 AM ---------- Previous post was at 11:01 AM ----------
And use the latest rsd lite version in my list
Sent from my XT862 using Tapatalk