My heart is about to break ;( , It's been a couple days without my rezound working properly.....
I tried to Flash BAMF's rom v1.1 and it kept on rebooting itself after a couple minutes.
After I found out that I had to install the new RUU i tried that.
And i guess i failed horribly.
I dl'd it and put it on my sd card.
I Locked my Rezound, and had it installing.
I ran it about 3 times and the blue bar went from blue to yellow and then it just went back to the android men skateboarding.
I tried to run my nandroid but I didnt get any signal what so ever (Wifi-3g-4g).
At this point I was going insane.
I'm not sure what I should do......
My phone is just a white screen having these text.
***UNLOCKED***
VIGOR PVT SHIP S-ON RL
HBOOT-2.11.0000
RADIO-0.95.00.1118r/0.95.00.1223r
OpenDSP-v10.6.0.7611.00.0919
eMMC-boot
Oct 6 2011, 15:43:22
PLEASE HELP ME
(Yes, i tried looking up very single thing....)
(I have both a PC and Mac, If possible can you post instructions for MacOS)
First, based off those version numbers, you never successfully installed the latest RUU. Scott has a nice write up on his site on how to do the RUU install, it's needed for any of the latest ICS based roms. - http://www.scottsroms.com/showthread.php/856-HOW-TO-Prepare-for-CleanROM-4-0-Update
If you're trying to restore a backed up rom, you also need flash the kernel back into place, nandroid restore can't do it because our phones are s-on. Try using this to do the restore - http://forum.xda-developers.com/showthread.php?t=1547496
Is it possible to do something else than recover the back up?
What are you trying to do before recovering the back up?
kevinlovesrice said:
My heart is about to break ;( , It's been a couple days without my rezound working properly.....
I tried to Flash BAMF's rom v1.1 and it kept on rebooting itself after a couple minutes.
After I found out that I had to install the new RUU i tried that.
And i guess i failed horribly.
I dl'd it and put it on my sd card.
I Locked my Rezound, and had it installing.
I ran it about 3 times and the blue bar went from blue to yellow and then it just went back to the android men skateboarding.
I tried to run my nandroid but I didnt get any signal what so ever (Wifi-3g-4g).
At this point I was going insane.
I'm not sure what I should do......
My phone is just a white screen having these text.
***UNLOCKED***
VIGOR PVT SHIP S-ON RL
HBOOT-2.11.0000
RADIO-0.95.00.1118r/0.95.00.1223r
OpenDSP-v10.6.0.7611.00.0919
eMMC-boot
Oct 6 2011, 15:43:22
PLEASE HELP ME
(Yes, i tried looking up very single thing....)
(I have both a PC and Mac, If possible can you post instructions for MacOS)
Click to expand...
Click to collapse
so when exactly did you almost brick?
I had a similiar problem. I relocked just fine, but when flashing the ruu it only partially worked even though it didn't give me any errors.
Turned out I had a bad download. Try to redownload ruu check file size and try to flash again. This worked for me.
tmar23 said:
I had a similiar problem. I relocked just fine, but when flashing the ruu it only partially worked even though it didn't give me any errors.
Turned out I had a bad download. Try to redownload ruu check file size and try to flash again. This worked for me.
Click to expand...
Click to collapse
That's weird. You have to run it twice, the first one updates hboot, and it will install in a random order. It will reboot, pull battery, get back to hboot, and install again. It will install in the correct order and be successful.
I was trying to recover a RezRom recovery but when I actually got into the back-up, it gave me no signal.
I'm going to try and re-download and hopefully revive me ReZound :,(
None of that = brick..
Sent from my ADR6425LVW using XDA Premium.
2 options at this point OP
1.) Reflash your custom recovery and a custom rom of your choice/nandroid and reflash kernel.
or
2.) Redownload/Check MD5 of the RUU, update, reflash AmonRA and reflash BAMF 1.1.
mjones73 said:
First, based off those version numbers, you never successfully installed the latest RUU. Scott has a nice write up on his site on how to do the RUU install, it's needed for any of the latest ICS based roms. - http://www.scottsroms.com/showthread.php/856-HOW-TO-Prepare-for-CleanROM-4-0-Update
If you're trying to restore a backed up rom, you also need flash the kernel back into place, nandroid restore can't do it because our phones are s-on. Try using this to do the restore - http://forum.xda-developers.com/showthread.php?t=1547496
Click to expand...
Click to collapse
Follow the scottsroms post on how to update. Whoever told you above that you have to battery pull to get to the second round of updating is wrong.
1. Lock it
2. Run the RUU PH98IMG.zip in the bootloader
3. It will go to the white HTC screen, for me, it stuck there for like 20min. Just make sure it's plugged in and be paitent.
4. It will reboot into fastboot, select bootloader and tell it to run the PH file again.
5. It will reboot into the stock ROM
if it does anything other than that, you've done it wrong.
6. Don't try to nandroid restore... just do a clean install and don't restore anything from Ti Backup. Why would you try to restore a broken install?
a-jive said:
Follow the scottsroms post on how to update. Whoever told you above that you have to battery pull to get to the second round of updating is wrong.
Click to expand...
Click to collapse
There were (not many) of some reports of hardlocking/freezing while updating hboot to where it comes up with an "OK" but doesnt give the prompt to press power to reboot.
Myself, I didn't have to.
this might help
Scott has a very detailed step by step guide in his CleanROM thread. Just a few pointers before you jump in. Following this and the steps in Scott's guide should help you to get your phone back. I truely suggest using the Amonra recovery, people have reported many times that this recovery just works right, no issues.
1) make sure you have a card reader for your computer that you can connect your removable micro-SD card to. Trust me, if you screw up somewhere in the process, having a reliable way to access the SD card is a life saver.
2) before flashing always wipe/factory reset 3 times, some think it is overkill, but if you end up with some odd glitch or bug when you just wiped once, you will most likely have to wipe and flash again to get rid of the bug...so of course you are actually saving time and hassle by just doing it 3 times in the first place.
3) make sure your battery is full or almost full before you start the process, you will avoid many problems by not having your phone battery die in the middle of a flash or update.
4) read, read and read again all the information and the instructions on what you are going to be doing, then make sure you understand and are comfortable Before you actually start. Reading through the forums and knowing beforehand what others have experienced, and the fixes, will make your life 100% better while you play with your phone.
THANKS
MY REZOUND IS ALIVE!!!!
I love scott.....
ohh my... im starting to think the definition for "bricking" a phone is changing
yojoe600 said:
ohh my... im starting to think the definition for "bricking" a phone is changing
Click to expand...
Click to collapse
+1
10 char
Yep. I was wondering when being in hboot=bricked.
Snuzzo said:
There were (not many) of some reports of hardlocking/freezing while updating hboot to where it comes up with an "OK" but doesnt give the prompt to press power to reboot.
Myself, I didn't have to.
Click to expand...
Click to collapse
My bad, didn't ever catch that issue in my research.
Alright. 3 days and countless hours researching to avoid getting flamed - i've reached my last resort.
I've got an unrooted Thunderbolt on my hands that is stuck in a bootloop. The HTC splash screen is all I can get aside of getting into HBOOT. Factory reset and recovery from the bootloader puts me right back into the boot loop. Ive tried flashing CWM via PG05IMG and it recognizes it but does not prompt me to go through with the install. I can't get ADB to recognize the device because USB debugging is apparently disabled. I have HTC SYNC process/application disabled (tried it enabled as well) and I have revolutionary's HTC driver installed (After it not working prior to its installation -- im getting desperate at this point). I am getting the click noise through my computers audio when I plug in the device to the computer, so I know its at least partially getting recognized - however, I cannot find it in my device manager. Im on WIN7. I have removed SIM and SD. Tried different of each cards. Verified MD5's of all files including the the latest OTA non-root RUU I tried to flash via bootloader (for the record this was my first step to troubleshoot the issue). When I attemped to flash the non-root OTA RUU it checked the file with the little side bar escalating and then brought me right back to the hboot screen with options
Here is the info I have. I was given this phone by someone who didn't want to mess around with trying to get it work, so as far as I know, its not rooted. In fact, im almost positive its all stock, or was. I really hope im missing something silly here. I just can't figure this one out.
MECHA XD SHIP S-ON
HBOOT-1.04.0000
MICROP-/
RADIO-1.48.00.0906w_1
eMMC-boot
Thanks.
-Andrew
EMMC?
I've tried re-balling that EMMC chip also, forgot to mention that. I may need a new one entirely according to some other posts...
Have you tried clearing caches ?
Sent from my ADR6400 using Tapatalk 2
So...you've spent three days trying to flash something to a phone with S-ON?
have you tried...getting S-OFF (root) first?
just sayin'
gcodori said:
So...you've spent three days trying to flash something to a phone with S-ON?
have you tried...getting S-OFF (root) first?
just sayin'
Click to expand...
Click to collapse
can't w/o booting, can htc unlock though but it wont help
trter10 said:
can't w/o booting, can htc unlock though but it wont help
Click to expand...
Click to collapse
Everything you say you are trying to do will not work without root. Can't change the bootloader without it...can't install custom recovery without unlocked bootloader. I might have that backwards, but in any case the only thing that might get you out of looping is to flash a .ruu file in bootloader. If you search the forums, you should find a link to one. A .ruu is a full system image file for the stock vzw t bolt ROM. You will loose all info on your phone (not sd card) but that might do it for you.
remove sd card from phone. back it up and format completely. install into phone.
use the HTC thunderbolt all in one program and see if the phone is recognized. if it is...use it to gain root and s-off. from there you can flash a recovery or go completely back to stock and s-on if you need.
for some reason i'm having a big problem going back to stock.
here's my current set up...
tampered
unlocked
s-on
hboot 1.12.0000
TWRP recovery
Stock with Goodies 3.40
all i'm trying to do is get back to stock!
here's what i've done so far...
1. connected phone to PC with USB Debugging on and ran RUU of the latest release
2. phone reboots and goes to the black HTC screen and just gets stuck there forever
then I realize I have to relock it so I relock and then reboot but then it just gets stuck in bootloader and won't go into OS or recovery...just reboots to bootloader when I try to do anything. plus when I try to do adb or run RUU from PC, the PC doesn't think the phone is actually connected to it.
so i've re-unlocked and now it goes back to OS but my whole point is to go to stock and unroot...what the hell am I doing wrong? I'm about to just throw the phone into the ground and get a new one since I have squaretrade warranty.
I know many of you are probably just thinking...why doesn't he s-off? because i don't have access to 32 bit windows 7 PC and figured just unrooting and then updating to latest RUU and then rerooting/unlocking would be sufficient.
THANKS in advance for any advice...
maybe
u might watch this video. i did the same this morning. made it easy for me anyway.
http://www.qbking77.com/how-to-unroot/unrootunbrick-the-htc-evo-4g-lte.html
all his videos are great.
that's what I started with...relocked and then ran RUU but it just gets stuck at the black HTC logo screen forever...like we're talking over an hour. the thing says it may take 10 minutes or so...i'm not getting anything status update...it just gets stuck there...
trsix said:
u might watch this video. i did the same this morning. made it easy for me anyway.
http://www.qbking77.com/how-to-unroot/unrootunbrick-the-htc-evo-4g-lte.html
all his videos are great.
Click to expand...
Click to collapse
umm
maybe instead of the latest ruu u should run the 1.12
http://www.androidfilehost.com/?fid=9390326628153819199
then again i'm still learning and don't know jack sheet
mine was 2.09 thats what i ran worked fine
Maybe Try Again
It took me a few tries or so, to get the RUU to work, but it finally worked.
One thing I realized is that I had to flash stock recovery prior to relocking, otherwise you're wasting your time, afaik.
...which leads me to how I came across this thread. I can't remember where I found stock recovery. I've been searching xda almost an hour. Can anyone tell me?
Dr Lexus said:
It took me a few tries or so, to get the RUU to work, but it finally worked.
One thing I realized is that I had to flash stock recovery prior to relocking, otherwise you're wasting your time, afaik.
...which leads me to how I came across this thread. I can't remember where I found stock recovery. I've been searching xda almost an hour. Can anyone tell me?
Click to expand...
Click to collapse
Click the link in my sig
Sent from my PoS MoPho
Ok, I will try to give as much info as I can, please let me know if there is anything else I should provide. I really appreciate any help and advice as I've been pulling my hair out for the last 3 days, spending 10+ hours trying to get my Amaze back working.
Problem started a few days ago, phone shut off, when it powered back on it was stuck on the White HTC logo. That same day the phone died completely and would not power on at all, not even the amber light. Eventually the amber light would blink the but phone wouldn't charge. I fixed this first issue by jump starting the battery with a 9V battery, something someone suggested on a thread. Worked great to get the phone charging again... but that's it. So basically I have access to the HBOOT/Fastboot and EXT4 Recovery menu's, and there is no OS on the phone, I know for sure now because I wiped the system.
When I try (but fail) to install the RUU 1.41 exe, and it checks the phone, i comes back saying my "current" version on the phone is 2.14.661.2 even though there isn't any OS on there...
Bit more background info. I purchased this phone last year off someone, it was running 4.1.2 and the bootloader was unlocked. It *is S-ON though.
Whatever else this guy did, I'm not sure as this is what I can tell, however the CID pulls up as Telus001? which the guy did tell me it was a Telus phone.
So I'm trying to load the Telus stock rom and I've been getting nowhere and pulling my hair out. I'm 10hrs in and no further then I was. So first I downloaded the Telus RUU 1.41 exe from the stock rom but it gives an Error 43. I tried this with both the bootloader locked again, and unlocked. I then downloaded the OTA 2.14.661 zip from the stock roms, and renamed it to PH85IMG, stuck that on the Ext SD card. Problem is when it boots into the HBOOT it actually see's the file, loads it, then checks it, but then returns me to the main menu. I don't get promted to update. Now I've tried this too with the bootloader unlocked, and locked. So a third go, I extracted the Rom from the 1.41 RUU and made that PH85IMG, tossed it onto the SD card and again this time it actually went further but gave another error.
I have tried to Sideload the above Roms through recovery but they give error's.
In that All In One program there is an option to fix the Mainver error, however when I run that all I get is "Device not found". The phone IS loaded under device manager as HTC Phone as I had installed the drivers. I've tried to google this fix but I can't get anywhere.
Everyone has said on forums that sticking a PH85IMG.zip file on an Ex SD and having it boot into the HBOOT menu will rebuild the phone, but I'm out of idea's how to get there because it loads the rom's, checks them, and then boots me back to the menu. There is only 2 Rom's I can find for Telus, and that's the 1.41 EXE or the OTA 2.14.661.2. My HBOOT version is 1.93.0002, RUBY PVT SHIP S-ON RL.
Thanks in advance for any help/suggestions, desperately just want my phone working again. I feel like I've been to the 4 corner's of google trying to solve this problem.
Strange This should not happen.Also if your phone is running 4.1.2 which should be a custom then that means your phone was updated to ics so the ruu.exe will fail.if you have access to 4ext recovery then you can flash any custom rom to boot your phone.But if you want stock and both of the stock roms for your carrier is not working then the only thing you can do is s-off the phone then use supercid so you can flash any carrier's rom then flash t-mobile ics stock.Tell me if this worked for you.
darkshadow1997 said:
Strange This should not happen.Also if your phone is running 4.1.2 which should be a custom then that means your phone was updated to ics so the ruu.exe will fail.if you have access to 4ext recovery then you can flash any custom rom to boot your phone.But if you want stock and both of the stock roms for your carrier is not working then the only thing you can do is s-off the phone then use supercid so you can flash any carrier's rom then flash t-mobile ics stock.Tell me if this worked for you.
Click to expand...
Click to collapse
Got it going!! Thanks for the suggestions. What did it in the end was this thread --> http://forum.xda-developers.com/showpost.php?p=27058110
I had EXT4 Recovery already, so I used his Zip and just flashed that. Phone came back up and is running great now... if only I had found his thread before the hr's and hr's I've been googling and trying things.
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help