Related
Hello all, I need some help if there are any ideas what could be going on with this phone. I can usually fix my own phone problems, but this one has stumped me...
I bought a rezound dirt cheap that was stuck on the white HTC screen and would not boot into the stock rom. At the time I bought it, it was s-on and I could get in the HBOOT and run fastboot commands.
Since buying it, I have tried many things to get this thing working. I've tried to RUU (with PH98IMG and .exe) and apparently after it completes it is once again in a boot loop on the white HTC screen. I have been able to unlock and flash a custom recovery onto it (amon-ra) and install any cm/aokp rom onto it and boot into that. The only issue with that is when in the rom, my wifi and bluetooth will not connect at all. It wont even toggle on in settings and it is not greyed out. 4G and everything else seems to work ok.
At this time, I'm thinking there is some kind of hardware failure but I'm open to suggestions.
In summary...
I have been able to s-off
I have tried different firmware combos of HBOOTs/radios
I have flashed custom recoveries and roms and can boot into them without wifi or bluetooth
I have been unsuccessful to RUU to anything stock, it'll just boot loop the white HTC screen
Right now, I have installed Tron 2.1 onto it. I did notice post:http://forum.xda-developers.com/showthread.php?t=2272781&highlight=no+wifi
When I go into system/lib, there was no /modules folder. I went ahead and created it and put in bcmdhd.ko and rebooted, but still no go. I'm not sure why the /modules folder was missing, but this reaches the extent of my knowledge on what is supposed to be there.
I believe I have tried everything and done fairly thorough searches to get this phone working properly and am at a loss what to do next. If anybody has a thought of something to try, I'm all for it. Fortunately if this phone doesnt work out, its not a big deal to me.
I don't want this to sound like another "stuck on HTC screen" thread. I have been through all those and this doesn't seem like the same problem.
Your help is greatly appreciated!
tacoman said:
Hello all, I need some help if there are any ideas what could be going on with this phone. I can usually fix my own phone problems, but this one has stumped me...
I bought a rezound dirt cheap that was stuck on the white HTC screen and would not boot into the stock rom. At the time I bought it, it was s-on and I could get in the HBOOT and run fastboot commands.
Since buying it, I have tried many things to get this thing working. I've tried to RUU (with PH98IMG and .exe) and apparently after it completes it is once again in a boot loop on the white HTC screen. I have been able to unlock and flash a custom recovery onto it (amon-ra) and install any cm/aokp rom onto it and boot into that. The only issue with that is when in the rom, my wifi and bluetooth will not connect at all. It wont even toggle on in settings and it is not greyed out. 4G and everything else seems to work ok.
At this time, I'm thinking there is some kind of hardware failure but I'm open to suggestions.
In summary...
I have been able to s-off
I have tried different firmware combos of HBOOTs/radios
I have flashed custom recoveries and roms and can boot into them without wifi or bluetooth
I have been unsuccessful to RUU to anything stock, it'll just boot loop the white HTC screen
Right now, I have installed Tron 2.1 onto it. I did notice post:http://forum.xda-developers.com/showthread.php?t=2272781&highlight=no+wifi
When I go into system/lib, there was no /modules folder. I went ahead and created it and put in bcmdhd.ko and rebooted, but still no go. I'm not sure why the /modules folder was missing, but this reaches the extent of my knowledge on what is supposed to be there.
I believe I have tried everything and done fairly thorough searches to get this phone working properly and am at a loss what to do next. If anybody has a thought of something to try, I'm all for it. Fortunately if this phone doesnt work out, its not a big deal to me.
I don't want this to sound like another "stuck on HTC screen" thread. I have been through all those and this doesn't seem like the same problem.
Your help is greatly appreciated!
Click to expand...
Click to collapse
i would like you to do the following.
flash this http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
2 times. it will make sure we have a solid base to work on.
after that has ran 2 times. boot into the stock rom one time.
after that flash this https://dl.dropboxusercontent.com/u/12405441/new.global.firm.PH98IMG.zip
once this is done let it boot into the rom.
from here you should be good to flash any rom that is out there to date. (note please dont restore any system data, only app data)
ALSO MAKE SURE YOU HAVE 100% battery. doing an ruu can brick the phone if its interrupted.
report back when done
Thanks for replying. I have flashed that RUU several times in a row in the past, but I'm redownloading it now to make sure my copy isnt corrupt. Earlier experience when I double flashed this it still remained a white HTC screen loop.
Currently estimated at 6hrs to download, so I wont be able to reply for a bit with my findings...
tacoman said:
Thanks for replying. I have flashed that RUU several times in a row in the past, but I'm redownloading it now to make sure my copy isnt corrupt. Earlier experience when I double flashed this it still remained a white HTC screen loop.
Currently estimated at 6hrs to download, so I wont be able to reply for a bit with my findings...
Click to expand...
Click to collapse
When the Rezound first came out a bunch of people had boot loop problems because the phone was set to wcdma or some such thing instead of cdma. I'm just a noob hack but that's my memory of it. The cure was to boot without the back cover on which contains the antenna and then change the setting.
Ok, I have re downloaded the AndroidPolice RUU and flashed twice, but was not able to boot into it no matter how long I waited (20 min+). It would just loop the HTC white screen. I then went ahead and flashed your global update firmware and have the same result after waiting (20 min+), it just loops the HTC white screen.
I have tried this process several times last night, but still no progress.
As the phone sits now:
*** UNLOCKED ***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.28.0000
RADIO-2.23.10.0123r/2.23.10.0124r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Sep 20 2012, 17:40:22
tacoman said:
Ok, I have re downloaded the AndroidPolice RUU and flashed twice, but was not able to boot into it no matter how long I waited (20 min+). It would just loop the HTC white screen. I then went ahead and flashed your global update firmware and have the same result after waiting (20 min+), it just loops the HTC white screen.
I have tried this process several times last night, but still no progress.
As the phone sits now:
*** UNLOCKED ***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.28.0000
RADIO-2.23.10.0123r/2.23.10.0124r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Sep 20 2012, 17:40:22
Click to expand...
Click to collapse
You need stock recovery and a locked bootloader
- "Is it dark in there?"
drynyks said:
You need stock recovery and a locked bootloader
- "Is it dark in there?"
Click to expand...
Click to collapse
S/he ran the RUU so they are stock.
Sounds like the symptoms of a kernel issue. Try pulling the boot.img from this stock OTA ROM and flashing it.
http://forum.xda-developers.com/showthread.php?t=2260154
fastboot flash boot boot.img
I have the exact same you. Been this way for months. Maybe once a month BT/Wifi will turn on but only for a few hours maybe. Phone will reboot itself and come back up with the 2 broken again.
feralicious said:
S/he ran the RUU so they are stock.
Sounds like the symptoms of a kernel issue. Try pulling the boot.img from this stock OTA ROM and flashing it.
http://forum.xda-developers.com/showthread.php?t=2260154
fastboot flash boot boot.img
Click to expand...
Click to collapse
Well I finally booted into stock sense after flashing that boot.img which is a big step from before. For a brief moment, it saw wifi networks in my office but when I went to connect to one, wifi died and it no longer sees any wifi network. Bluetooth appears to still be an issue as well, i.e. will not turn on.
Flyhalf205 said:
I have the exact same you. Been this way for months. Maybe once a month BT/Wifi will turn on but only for a few hours maybe. Phone will reboot itself and come back up with the 2 broken again.
Click to expand...
Click to collapse
Unfortunatly that doesnt sound very good for me if you've been battling this wifi/BT problem for months.
synisterwolf said:
i would like you to do the following.
flash this http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
2 times. it will make sure we have a solid base to work on.
after that has ran 2 times. boot into the stock rom one time.
after that flash this https://dl.dropboxusercontent.com/u/12405441/new.global.firm.PH98IMG.zip
once this is done let it boot into the rom.
from here you should be good to flash any rom that is out there to date. (note please dont restore any system data, only app data)
ALSO MAKE SURE YOU HAVE 100% battery. doing an ruu can brick the phone if its interrupted.
report back when done
Click to expand...
Click to collapse
can you explain what you mean by flash the ruu twice once I have saved it to the root of my sd card? Does that just mean get to the bootloader, watch as it reads the the ph98img file and let it do that twice, or do I need to reboot in between, or do I need to put in a command?
fivedezs said:
can you explain what you mean by flash the ruu twice once I have saved it to the root of my sd card? Does that just mean get to the bootloader, watch as it reads the the ph98img file and let it do that twice, or do I need to reboot in between, or do I need to put in a command?
Click to expand...
Click to collapse
when you let hboot flash the zip, the first time is super short. it updates hboot, stock recovery, and splash i think. then it will reboot back to bootloader and ask to be flashed again. this time it will take some time to update because it does the whole system.
---------- Post added at 08:25 AM ---------- Previous post was at 08:24 AM ----------
tacoman said:
Well I finally booted into stock sense after flashing that boot.img which is a big step from before. For a brief moment, it saw wifi networks in my office but when I went to connect to one, wifi died and it no longer sees any wifi network. Bluetooth appears to still be an issue as well, i.e. will not turn on.
Click to expand...
Click to collapse
something doesnt seem right. the RUU would have flashed the boot.img for you. can you link me to the downloaded ruu that you have? also before you run the ruu did you do fastboot oem lock the bootloader?
Edit:
i remember an old trick from the inc days. after the RUU boot back into hboot and do a "factory reset" then boot into the phone. it use to fix the radio errors somewhere getting after a RUU. no clue why we did it. it just worked. try that when you are on stock recovery locked bootloader
Here is the RUU I have re downloaded. It was also the original I used in the past on my other Rezound
https://www.dropbox.com/s/1570h8l0ba1u7qp/rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
I have also tried the RUU 3.14.605.12.exe and a couple other different RUU versions, but have the same issue with that as well. Even on MicroMod777's OTA-Global-Stock-4.05.605.14 710RD-Rooted 5/1/13 flashed through amon-ra, I get the bootloop. I have done these as locked and unlocked bootloader with no difference. I have also tried the factory reset with locked bootloader.... no go with that either.
I was only able to finally boot in to stock by fastboot flashing the boot.img, and that is where this phone sits now. My major issue at this point is I dont have wifi or bluetooth and have dug through numerous posts and tried different things, and nothing is working on it. What was strange as I said in my previous post, the very first time I was able to boot into stock sense by flashing the boot.img, it briefly saw wifi networks but disappeared and disabled as soon as I tried to connect to one. I have not been able to replicate that since then.
On a sidenote and possibly related, since this phone has been sitting at my desk I decided to try and flash Newt's NOS JB v1.0.0 ROM and it bootloops also at the droid eye screen. I never was able to get it going on this phone. My other rezound boots this just fine.
I think I have reached the limits of my android knowledge of what to try on this thing. I am satisfied with it not having wifi/bluetooth since my wife wont be using those features. I would like to understand what the heck is going on though.
Hello. So I've tried multiple times flashing ROMs to my device, and have always had problems somewhere along the line. The furthest I got was successfully flashing this ROM, but it ended up in a boot loop. I believed it was due to my device being S-ON, even though I've successfully rooted and unlocked my bootloader via HTCdev and thus I've been attempting to get S-OFF. I tried JuopunutBear but got an error message related to checking my adb and fastboot drivers (Which I'm fairly sure are up to date and working) and I think the problem is I am on HBOOT 1.57. I've been attempting to downgrade using this guide (Which uses Revolutionary to get S-OFF in which case I wouldn't need JuopunutBear). I only got a bit of the way in, however, before I got stuck. After relocking my device it tells you to put the RUU zip on your device, but my computer isn't detecting my device and I'm stuck in the bootloader. I've tried shutting it off, trying all the options in the bootloader, taking out the battery, entering commands into adb, and probably some other things I've forgot, but I'm still stuck on the bootloader and my device isn't detected at all on my computer (Either in command prompt or in the explorer window).
Essentially what I'm asking here is:
How do I get my phone unstuck from bootloader?
Do I need S-OFF to be able to flash ROMs?
If I don't need S-OFF, what was I doing wrong? Should I try a different ROM?
And I suppose I may as well ask if that's a worthwhile ROM. I want something that optimizes my device and allows for custom themes, but otherwise I'm not too picky.
Specs:
Windows Vista (With ADB and fastboot, as well as HTC Sync and other phone drivers. Essentially I think I have all the software I'd need installed.)
HTC EVO 3D CDMA with Virgin Mobile as the carrier.
HTCdev unlocked bootloader
S-ON
HBOOT 1.57
Stock ROM
4ext recovery
Any and all help would be greatly appreciated!
(Also I apologize if I didn't give all the information needed or if I posted this in the incorrect spot. I figured this would be the most appropriate spot since although I have issues with specific processes it's also a fairly general request for help.)
UPDATE: I tried re-unlocking my phone using HTCdev so I'm no longer stuck in bootloader. I'm going to be trying the HBOOT Downgrade Toolkit guide again sometime today or tomorrow to see if I can get it working. I think one of the problems before was that I didn't put the RUU on the sdcard beforehand and then my device wasn't being recognized so i couldn't put it there then. If I put it on beforehand I should be able to update successfully and get past the step I was stuck on before.
If you're son u can only flash sence ROMs.
Sent from my PG86100 using xda app-developers app
cj_302 said:
If you're son u can only flash sence ROMs.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Er, I'm not quite sure what you're saying here.
UPDATE: I tried re-unlocking my phone using HTCdev so I'm no longer stuck in bootloader. I'm going to be trying the HBOOT Downgrade Toolkit guide again sometime today or tomorrow to see if I can get it working. I think one of the problems before was that I didn't put the RUU on the sdcard beforehand and then my device wasn't being recognized so i couldn't put it there then. If I put it on beforehand I should be able to update successfully and get past the step I was stuck on before.
It will be your hboot causing the problems.
Most recoveries allow you to mount usb storage so you can use that option to connect to your pc and move the ruu across without removing your sdcard etc.
Download G Cloud Backup for Android, up to 8 GB Free.Use this code: [KWLYRO] at signup and we'll both earn space: https://play.google.com/store/apps/details?id=com.genie9.gcloudbackup
so I bricked my device. it boot loops at the htc screen. several hours later or repair attempts and I still am back to where I started. Initially was able to load elegencia, but when the wifi was not responding I tried to load another ROM and everything has just gone downhill from there.
on my boot screen I see
***UNLOCKED***
EVITARE_UL PVT SHIP S-ON RL
HBOOT1.32.0000
CPLD-None
MICROP-None
RADIO-SSD: 1.09.55.17
EMMC-bootmode: disabled
CPU-bootmode: disabled
HW-Secure boot: enabled
modem type : mdm9215m
I dont really want to re-trace all my steps as I have tried many things to get this back up and running. I may have put the wrong ROM on as I got confused thinking this was a HTC OneXL. I think I want to put venom on here and leave it be. As of now I can no longer see the oneX+as a removable hard drive when i plug it into my pc. windows reports missing hardware ID once and a while. I have recovery as an option when I boot to hboot, but I cannot figure out how to load a boot able image from there. my backups got deleted. When I check my hardware with adb I cannot see it, but my pc detects a device being plugged in. I can flash to the device. So I think I also deleted my hardware ID trying to put in 11111111 superCID. not sure what else I can add. Any help would be appreciated.
sorry if this type of thing has been played out, I just dont want to follow another guide that gets me nothing or makes things worse.
Well, if it makes you feel any better, as long as it boots it's probably not "bricked". Since you can still flash.. can you not just reflash recovery, wipe it all, and flash stock?
hastings101 said:
Well, if it makes you feel any better, as long as it boots it's probably not "bricked". Since you can still flash.. can you not just reflash recovery, wipe it all, and flash stock?
Click to expand...
Click to collapse
it does. thanks. I am kind of nervous to do anything else without specific instruction or guidance. Where can I find a stock rom? what command sequence should I use in flash boot to get it back to normal? I know I can force ROM onto the unit with adb but adb isn't seeing my unit while fastboot is. so how do I get the rom onto my phone?
U changed the Rom with another one thin it's looping ?
Maybe it's the kernel !!
Boot into bootloader and flash a new kernal that support ur new Rom .. don't forget boot.omg
Sent from my HTC One X+ using Tapatalk 4
I did more than change the rom. I tried several things to recover the device and may have made things worse. The last rom I tried to upload, was probably not for my unit. for whatever reason I convinced myself that the reason I was having issues was because I had an htc oneXL and not a htc OneX+, and that may have compounded issues. I also tried to flash superCID to 11111111 and I was never able to do it, and at around that point my unit dissapeared as a removeable storage in windows. SO I am unsure how to put roms on the phone now. adb does not seem to see my unit.
I tried running the android phone ROM update utility but am getting a Error 155: unknown error, when I run it.
I dl'ed and ran the two top most ones here http://www.androidruu.com/index.php?developer=EvitaRE . the update went pretty far but never completed due to the first saying it was incorrect version and the second the Error 155. One thing that is different now, is I re-updated my drivers using Hasoons HTC OneX+ all in one toolkit and I can now see a drive in windows when I boot into recovery. The removable storage drive in windows tell me to insert a disk when I click on it, though. Before I could see 59 gigs of storage, it now has 0 bytes.
I think I am ok for now. I was able to get viperxl+ 2.0 to load via side loader on my second attempt. I rebooted and no more loop. still cannot see my storage in windows when plugged in via usb. but running is running. thanks for your suggestions.
drioddead said:
I think I am ok for now. I was able to get viperxl+ 2.0 to load via side loader on my second attempt. I rebooted and no more loop. still cannot see my storage in windows when plugged in via usb. but running is running. thanks for your suggestions.
Click to expand...
Click to collapse
don't try to change the [CID] u cant do it on OneX+ because (S-ON) and no way to make it off ( as i know )
try flashing stock RUU after re-lock ur Bootloader and thin u will get the OTA update its awesome
+1 to flashing a stock RUU, in theory, this should fix any issue you're having. Once back to stock and 100% working you can start flashing other ROMs.
REMEMBER: AT&T and the International phones ARE different and require matching ROMs. ie if you have ATT phone, make sure you flash an ATT ROM/kernel
I replaced my digitizer and screen a few days ago and all was working well. After turning the phone off and on a few times over a couple of days it was still working great. Then I tried to start it and got the htc splash screen and then black. I pulled the battery and booted into bootloader. It gave me several error messages looking for (I think) PH98DIAG.ZIP and not finding it. I have tried to reinstall TWERP 2.6.3.0 using fastboot usb and get a message that installation was successful, but I cant access TWERP in bootloader. I have tried FACTORY RESET with no improvement. If I start the phone and get past the htc screen, it gets warm and the battery eventually runs down, so SOMETHING is running.
I also tried to install TWERP using the adb flash_image method and my phone is not recognized. Of course both methods require usb debugging mode to be switched on and I can't get there.
I was running Infection 8.2.1 and TWERP 2.6.3.0. Rooted, S-on, bootloader unlocked (of course).
Any suggestions?
This is our most desperate hour. Help me, Obi-Wan Kenobi. You're my only hope.
geronimo48 said:
I replaced my digitizer and screen a few days ago and all was working well. After turning the phone off and on a few times over a couple of days it was still working great. Then I tried to start it and got the htc splash screen and then black. I pulled the battery and booted into bootloader. It gave me several error messages looking for (I think) PH98DIAG.ZIP and not finding it. I have tried to reinstall TWERP 2.6.3.0 using fastboot usb and get a message that installation was successful, but I cant access TWERP in bootloader. I have tried FACTORY RESET with no improvement. If I start the phone and get past the htc screen, it gets warm and the battery eventually runs down, so SOMETHING is running.
I also tried to install TWERP using the adb flash_image method and my phone is not recognized. Of course both methods require usb debugging mode to be switched on and I can't get there.
I was running Infection 8.2.1 and TWERP 2.6.3.0. Rooted, S-on, bootloader unlocked (of course).
Any suggestions?
This is our most desperate hour. Help me, Obi-Wan Kenobi. You're my only hope.
Click to expand...
Click to collapse
1) The looking for files and not finding any is normal.
2) What's it doing when you try to go into recovery? Just a blank screen? You may want to try installing the recovery using the PH98IMG.zip method if you have access to a card reader to get the file on your SD Card. - http://forum.xda-developers.com/showthread.php?t=1902381
Download the attached file in that thread, rename it to just PH98IMG.zip, place it on the root of your SD card and go into the bootloader, it should find the file and ask you to press volume up to install it. If it goes successful, remove the zip file then try to get into recovery from the bootloader again.
mjones73 said:
1) The looking for files and not finding any is normal.
2) What's it doing when you try to go into recovery? Just a blank screen? You may want to try installing the recovery using the PH98IMG.zip method if you have access to a card reader to get the file on your SD Card. - http://forum.xda-developers.com/showthread.php?t=1902381
Download the attached file in that thread, rename it to just PH98IMG.zip, place it on the root of your SD card and go into the bootloader, it should find the file and ask you to press volume up to install it. If it goes successful, remove the zip file then try to get into recovery from the bootloader again.
Click to expand...
Click to collapse
I tried that. Bootloader only searches for PH98DIAG.ZIP, doesn't find it and goes black.
@geronimo48 Are you S-Off...if so when you boot into bootloader and can access the fastboot usb from there i can give you the RUU.exe files you run in windows that factory restores your phone from the pc
My phone is S-ON. I kept it that way to make sure I wouldn't brick it .
Thanks for trying.
My phone is S-ON. I kept it that way to make sure I wouldn't brick it .
Thanks for trying.
geronimo48 said:
My phone is S-ON. I kept it that way to make sure I wouldn't brick it .
Thanks for trying.
Click to expand...
Click to collapse
s-off allows you to unbrick though...ill search for the diag files as your on a tough boat
Edit: what hboot you on....i may have a fix for you if on hboot 2.25 or 2.27
Hboot is 2.27
I am thinking there is no way to S-Off with my phone the way it is, correct?
geronimo48 said:
I am thinking there is no way to S-Off with my phone the way it is, correct?
Click to expand...
Click to collapse
nope...your soft bricked and need access to rom to change a few settings in that and have it running before starting the process...i may have a fix for you..PM me if you can
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help