Related
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Pulsewave said:
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Click to expand...
Click to collapse
Not sure about the Amaze tbh, but if I had a failed flash on either of my HTC phones, I just re RUU'd.
D'oh! I forgot about that! Had to do that for my buddy's thunderbolt a few times. Lemme give that a shot and I'll report back
Edit: Worked
Edit:double post
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Bricked Htc Amaze 4g
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I can get into recovery but it wont let me flash anything.Thanks to whoever replies I really appreciate it.
lmfaoomg said:
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Click to expand...
Click to collapse
You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
samiaziz said:
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I really appreciate it.
Click to expand...
Click to collapse
Same with you. You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
Superwiping the phone removes all the data from the old ROM so you can install a fresh clean ROM.
If you want to install the RUU, you have to relock the bootloader first and then you can reflash the original RUU
Edit: i was misinformed
Sent from my NRGized Amaze...
via xda premium
aj_2423 said:
I dont believe u have to relock
Sent from my NRGized Amaze...
via xda premium
Click to expand...
Click to collapse
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
If the phone wont go into recovery, you have to use ADB and wipe the cache partition for it to go into recovery again. This is apparently a bug with some of recoveries posted by other devs in the development forum. You need to use fastboot.exe to wipe the cache via adb
And if... If the superwipe doesn't work due to recovery version you have try to boot in to your Bootloader run one of hasoon's tool and choose different recovery.. it did happen to me the bootloop before due to the fact the old roms like mike's rom. he doesn't update his script to support the newer recoveries and it doesn't support X's recovery, it will give you an error installation.. just try different recoveries and for sure your problem will be solved..
just make sure boot in your bootloader/H-boot then run hasoon's tool and have enough battery just to make sure...
hasoon2000 said:
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
Click to expand...
Click to collapse
Thanks for the good info Sir but i my HTC Amaze is bootloader locked and S-ON but i cannot find a RUU for T-mobile to unbrick it. Will a Ruu such as this one work?
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.550L.17DC_30.68.550L.09_release_227343_signed.exe
My HTC Amaze scans all the versions of the PH85IMG i place on the sd card but goes back to the menu when its down
any advice that could help i will appreciate!
There's a thread in the dev section that has about a dozen RUUs. I don't see how one can miss it.
Thanks for your reply but i was a little unsure and did not want to make my phone any worst than it already is.
Can you explain 1 thing thing for me please - RUU always you to flash the phone via the computer? where as PH85img.zip allows you to flash the phone via sdcard? I hope i am correct here.
but i want to know how can i flash the phone when its connected via HBoot usb cause my pc recognizes it as "Android Composite ADB Interface"
Currently this is what is on my lcd
LOCKED
RUBY PVT SHIP S-ON RL
HBOOT-1.93.0002
EMMC BOOT
MAR 15 2012
i have tried several PH85img.zip files but the phone just scans them and goes back to the menu.
Some help will be appreciated extremely.
---------- Post added at 03:40 PM ---------- Previous post was at 03:33 PM ----------
I forgot to mention it connects to the pc but when i run command adb devices this is what i get
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\rquinlan.GOSL_DOM>adb devices
List of devices attached
C:\Documents and Settings\rquinlan.GOSL_DOM>
The latest ruu would be your best option, do not put the .zip part of the name since its already there, also a ruu may be an exe or zip file, since it is a complete stock file to restore the device, what would your carrier be to be exact? Just not up to reading through everything in this thread to see if you mentioned that piece of info, if its tmobile then the very first file in the stock ruu/ota thread would be the file you need.
Sent from my iPad using Tapatalk HD
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Linkzz said:
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Click to expand...
Click to collapse
Why are you using recovery exactly?
RUU's are to be flash via hboot, which is the very first screen you see when you go into the device's bootloader, in the case of exe files, you'll need to flash it via fastboot mode, which happens to be, correct me if I'm wrong, the very first or second option on the hboot menu.
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Linkzz said:
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Click to expand...
Click to collapse
What carrier are you on?
t-mobile
this is the RUU i tried and made a connection but the PH85img.zip are not working no matter how i try
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.55 0L.17DC_30.68.550L.09_release_227343_signed.exe
Alright. 3 days and countless hours researching to avoid getting flamed - i've reached my last resort.
I've got an unrooted Thunderbolt on my hands that is stuck in a bootloop. The HTC splash screen is all I can get aside of getting into HBOOT. Factory reset and recovery from the bootloader puts me right back into the boot loop. Ive tried flashing CWM via PG05IMG and it recognizes it but does not prompt me to go through with the install. I can't get ADB to recognize the device because USB debugging is apparently disabled. I have HTC SYNC process/application disabled (tried it enabled as well) and I have revolutionary's HTC driver installed (After it not working prior to its installation -- im getting desperate at this point). I am getting the click noise through my computers audio when I plug in the device to the computer, so I know its at least partially getting recognized - however, I cannot find it in my device manager. Im on WIN7. I have removed SIM and SD. Tried different of each cards. Verified MD5's of all files including the the latest OTA non-root RUU I tried to flash via bootloader (for the record this was my first step to troubleshoot the issue). When I attemped to flash the non-root OTA RUU it checked the file with the little side bar escalating and then brought me right back to the hboot screen with options
Here is the info I have. I was given this phone by someone who didn't want to mess around with trying to get it work, so as far as I know, its not rooted. In fact, im almost positive its all stock, or was. I really hope im missing something silly here. I just can't figure this one out.
MECHA XD SHIP S-ON
HBOOT-1.04.0000
MICROP-/
RADIO-1.48.00.0906w_1
eMMC-boot
Thanks.
-Andrew
EMMC?
I've tried re-balling that EMMC chip also, forgot to mention that. I may need a new one entirely according to some other posts...
Have you tried clearing caches ?
Sent from my ADR6400 using Tapatalk 2
So...you've spent three days trying to flash something to a phone with S-ON?
have you tried...getting S-OFF (root) first?
just sayin'
gcodori said:
So...you've spent three days trying to flash something to a phone with S-ON?
have you tried...getting S-OFF (root) first?
just sayin'
Click to expand...
Click to collapse
can't w/o booting, can htc unlock though but it wont help
trter10 said:
can't w/o booting, can htc unlock though but it wont help
Click to expand...
Click to collapse
Everything you say you are trying to do will not work without root. Can't change the bootloader without it...can't install custom recovery without unlocked bootloader. I might have that backwards, but in any case the only thing that might get you out of looping is to flash a .ruu file in bootloader. If you search the forums, you should find a link to one. A .ruu is a full system image file for the stock vzw t bolt ROM. You will loose all info on your phone (not sd card) but that might do it for you.
remove sd card from phone. back it up and format completely. install into phone.
use the HTC thunderbolt all in one program and see if the phone is recognized. if it is...use it to gain root and s-off. from there you can flash a recovery or go completely back to stock and s-on if you need.
Hello all, I need some help if there are any ideas what could be going on with this phone. I can usually fix my own phone problems, but this one has stumped me...
I bought a rezound dirt cheap that was stuck on the white HTC screen and would not boot into the stock rom. At the time I bought it, it was s-on and I could get in the HBOOT and run fastboot commands.
Since buying it, I have tried many things to get this thing working. I've tried to RUU (with PH98IMG and .exe) and apparently after it completes it is once again in a boot loop on the white HTC screen. I have been able to unlock and flash a custom recovery onto it (amon-ra) and install any cm/aokp rom onto it and boot into that. The only issue with that is when in the rom, my wifi and bluetooth will not connect at all. It wont even toggle on in settings and it is not greyed out. 4G and everything else seems to work ok.
At this time, I'm thinking there is some kind of hardware failure but I'm open to suggestions.
In summary...
I have been able to s-off
I have tried different firmware combos of HBOOTs/radios
I have flashed custom recoveries and roms and can boot into them without wifi or bluetooth
I have been unsuccessful to RUU to anything stock, it'll just boot loop the white HTC screen
Right now, I have installed Tron 2.1 onto it. I did notice post:http://forum.xda-developers.com/showthread.php?t=2272781&highlight=no+wifi
When I go into system/lib, there was no /modules folder. I went ahead and created it and put in bcmdhd.ko and rebooted, but still no go. I'm not sure why the /modules folder was missing, but this reaches the extent of my knowledge on what is supposed to be there.
I believe I have tried everything and done fairly thorough searches to get this phone working properly and am at a loss what to do next. If anybody has a thought of something to try, I'm all for it. Fortunately if this phone doesnt work out, its not a big deal to me.
I don't want this to sound like another "stuck on HTC screen" thread. I have been through all those and this doesn't seem like the same problem.
Your help is greatly appreciated!
tacoman said:
Hello all, I need some help if there are any ideas what could be going on with this phone. I can usually fix my own phone problems, but this one has stumped me...
I bought a rezound dirt cheap that was stuck on the white HTC screen and would not boot into the stock rom. At the time I bought it, it was s-on and I could get in the HBOOT and run fastboot commands.
Since buying it, I have tried many things to get this thing working. I've tried to RUU (with PH98IMG and .exe) and apparently after it completes it is once again in a boot loop on the white HTC screen. I have been able to unlock and flash a custom recovery onto it (amon-ra) and install any cm/aokp rom onto it and boot into that. The only issue with that is when in the rom, my wifi and bluetooth will not connect at all. It wont even toggle on in settings and it is not greyed out. 4G and everything else seems to work ok.
At this time, I'm thinking there is some kind of hardware failure but I'm open to suggestions.
In summary...
I have been able to s-off
I have tried different firmware combos of HBOOTs/radios
I have flashed custom recoveries and roms and can boot into them without wifi or bluetooth
I have been unsuccessful to RUU to anything stock, it'll just boot loop the white HTC screen
Right now, I have installed Tron 2.1 onto it. I did notice post:http://forum.xda-developers.com/showthread.php?t=2272781&highlight=no+wifi
When I go into system/lib, there was no /modules folder. I went ahead and created it and put in bcmdhd.ko and rebooted, but still no go. I'm not sure why the /modules folder was missing, but this reaches the extent of my knowledge on what is supposed to be there.
I believe I have tried everything and done fairly thorough searches to get this phone working properly and am at a loss what to do next. If anybody has a thought of something to try, I'm all for it. Fortunately if this phone doesnt work out, its not a big deal to me.
I don't want this to sound like another "stuck on HTC screen" thread. I have been through all those and this doesn't seem like the same problem.
Your help is greatly appreciated!
Click to expand...
Click to collapse
i would like you to do the following.
flash this http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
2 times. it will make sure we have a solid base to work on.
after that has ran 2 times. boot into the stock rom one time.
after that flash this https://dl.dropboxusercontent.com/u/12405441/new.global.firm.PH98IMG.zip
once this is done let it boot into the rom.
from here you should be good to flash any rom that is out there to date. (note please dont restore any system data, only app data)
ALSO MAKE SURE YOU HAVE 100% battery. doing an ruu can brick the phone if its interrupted.
report back when done
Thanks for replying. I have flashed that RUU several times in a row in the past, but I'm redownloading it now to make sure my copy isnt corrupt. Earlier experience when I double flashed this it still remained a white HTC screen loop.
Currently estimated at 6hrs to download, so I wont be able to reply for a bit with my findings...
tacoman said:
Thanks for replying. I have flashed that RUU several times in a row in the past, but I'm redownloading it now to make sure my copy isnt corrupt. Earlier experience when I double flashed this it still remained a white HTC screen loop.
Currently estimated at 6hrs to download, so I wont be able to reply for a bit with my findings...
Click to expand...
Click to collapse
When the Rezound first came out a bunch of people had boot loop problems because the phone was set to wcdma or some such thing instead of cdma. I'm just a noob hack but that's my memory of it. The cure was to boot without the back cover on which contains the antenna and then change the setting.
Ok, I have re downloaded the AndroidPolice RUU and flashed twice, but was not able to boot into it no matter how long I waited (20 min+). It would just loop the HTC white screen. I then went ahead and flashed your global update firmware and have the same result after waiting (20 min+), it just loops the HTC white screen.
I have tried this process several times last night, but still no progress.
As the phone sits now:
*** UNLOCKED ***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.28.0000
RADIO-2.23.10.0123r/2.23.10.0124r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Sep 20 2012, 17:40:22
tacoman said:
Ok, I have re downloaded the AndroidPolice RUU and flashed twice, but was not able to boot into it no matter how long I waited (20 min+). It would just loop the HTC white screen. I then went ahead and flashed your global update firmware and have the same result after waiting (20 min+), it just loops the HTC white screen.
I have tried this process several times last night, but still no progress.
As the phone sits now:
*** UNLOCKED ***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.28.0000
RADIO-2.23.10.0123r/2.23.10.0124r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Sep 20 2012, 17:40:22
Click to expand...
Click to collapse
You need stock recovery and a locked bootloader
- "Is it dark in there?"
drynyks said:
You need stock recovery and a locked bootloader
- "Is it dark in there?"
Click to expand...
Click to collapse
S/he ran the RUU so they are stock.
Sounds like the symptoms of a kernel issue. Try pulling the boot.img from this stock OTA ROM and flashing it.
http://forum.xda-developers.com/showthread.php?t=2260154
fastboot flash boot boot.img
I have the exact same you. Been this way for months. Maybe once a month BT/Wifi will turn on but only for a few hours maybe. Phone will reboot itself and come back up with the 2 broken again.
feralicious said:
S/he ran the RUU so they are stock.
Sounds like the symptoms of a kernel issue. Try pulling the boot.img from this stock OTA ROM and flashing it.
http://forum.xda-developers.com/showthread.php?t=2260154
fastboot flash boot boot.img
Click to expand...
Click to collapse
Well I finally booted into stock sense after flashing that boot.img which is a big step from before. For a brief moment, it saw wifi networks in my office but when I went to connect to one, wifi died and it no longer sees any wifi network. Bluetooth appears to still be an issue as well, i.e. will not turn on.
Flyhalf205 said:
I have the exact same you. Been this way for months. Maybe once a month BT/Wifi will turn on but only for a few hours maybe. Phone will reboot itself and come back up with the 2 broken again.
Click to expand...
Click to collapse
Unfortunatly that doesnt sound very good for me if you've been battling this wifi/BT problem for months.
synisterwolf said:
i would like you to do the following.
flash this http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
2 times. it will make sure we have a solid base to work on.
after that has ran 2 times. boot into the stock rom one time.
after that flash this https://dl.dropboxusercontent.com/u/12405441/new.global.firm.PH98IMG.zip
once this is done let it boot into the rom.
from here you should be good to flash any rom that is out there to date. (note please dont restore any system data, only app data)
ALSO MAKE SURE YOU HAVE 100% battery. doing an ruu can brick the phone if its interrupted.
report back when done
Click to expand...
Click to collapse
can you explain what you mean by flash the ruu twice once I have saved it to the root of my sd card? Does that just mean get to the bootloader, watch as it reads the the ph98img file and let it do that twice, or do I need to reboot in between, or do I need to put in a command?
fivedezs said:
can you explain what you mean by flash the ruu twice once I have saved it to the root of my sd card? Does that just mean get to the bootloader, watch as it reads the the ph98img file and let it do that twice, or do I need to reboot in between, or do I need to put in a command?
Click to expand...
Click to collapse
when you let hboot flash the zip, the first time is super short. it updates hboot, stock recovery, and splash i think. then it will reboot back to bootloader and ask to be flashed again. this time it will take some time to update because it does the whole system.
---------- Post added at 08:25 AM ---------- Previous post was at 08:24 AM ----------
tacoman said:
Well I finally booted into stock sense after flashing that boot.img which is a big step from before. For a brief moment, it saw wifi networks in my office but when I went to connect to one, wifi died and it no longer sees any wifi network. Bluetooth appears to still be an issue as well, i.e. will not turn on.
Click to expand...
Click to collapse
something doesnt seem right. the RUU would have flashed the boot.img for you. can you link me to the downloaded ruu that you have? also before you run the ruu did you do fastboot oem lock the bootloader?
Edit:
i remember an old trick from the inc days. after the RUU boot back into hboot and do a "factory reset" then boot into the phone. it use to fix the radio errors somewhere getting after a RUU. no clue why we did it. it just worked. try that when you are on stock recovery locked bootloader
Here is the RUU I have re downloaded. It was also the original I used in the past on my other Rezound
https://www.dropbox.com/s/1570h8l0ba1u7qp/rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
I have also tried the RUU 3.14.605.12.exe and a couple other different RUU versions, but have the same issue with that as well. Even on MicroMod777's OTA-Global-Stock-4.05.605.14 710RD-Rooted 5/1/13 flashed through amon-ra, I get the bootloop. I have done these as locked and unlocked bootloader with no difference. I have also tried the factory reset with locked bootloader.... no go with that either.
I was only able to finally boot in to stock by fastboot flashing the boot.img, and that is where this phone sits now. My major issue at this point is I dont have wifi or bluetooth and have dug through numerous posts and tried different things, and nothing is working on it. What was strange as I said in my previous post, the very first time I was able to boot into stock sense by flashing the boot.img, it briefly saw wifi networks but disappeared and disabled as soon as I tried to connect to one. I have not been able to replicate that since then.
On a sidenote and possibly related, since this phone has been sitting at my desk I decided to try and flash Newt's NOS JB v1.0.0 ROM and it bootloops also at the droid eye screen. I never was able to get it going on this phone. My other rezound boots this just fine.
I think I have reached the limits of my android knowledge of what to try on this thing. I am satisfied with it not having wifi/bluetooth since my wife wont be using those features. I would like to understand what the heck is going on though.
i bought the m8 on att froma guy on craigslist i cant figure out how to unroot it ive tried installing skydragon a maximus but i cant get pass the htc boot screen ive tried updating the twrp to the newest and no i dont have a recovery ive even tried downgrading to an older one any help?? edit!! i cant get pass the boot screen i had cwm and tried installing stock att firmware please help
Jduncan312 said:
i bought the m8 on att froma guy on craigslist i cant figure out how to unroot it ive tried installing skydragon a maximus but i cant get pass the htc boot screen ive tried updating the twrp to the newest and no i dont have a recovery ive even tried downgrading to an older one any help?? edit!! i cant get pass the boot screen i had cwm and tried installing stock att firmware please help
Click to expand...
Click to collapse
What does your heart really want? Do you want to run custom ROMs and have root or not? It mostly sounds like you may want to return to stock due to lack of understanding and knowledge. That's okay if you want to do that. But kinda against the spirit of XDA!
Relock the bootloader and RUU will return the phone to stock and unrooted.
But it just sounds like you have mismatched firmware (results in long boot times with no boot animation, which some folks mistake for it not being booted).
Also, the newest TWRP require updated hboot, so that is probably the problem there.
If you want the phone rooted, and running a custom ROM: either run a ROM that corresponds with your firmware, or s-off and update your firmware.
What hboot and radio numbers? S-on or S-off?
redpoint73 said:
What does your heart really want? Do you want to run custom ROMs and have root or not? It mostly sounds like you may want to return to stock due to lack of understanding and knowledge. That's okay if you want to do that. But kinda against the spirit of XDA!
Relock the bootloader and RUU will return the phone to stock and unrooted.
But it just sounds like you have mismatched firmware (results in long boot times with no boot animation, which some folks mistake for it not being booted).
Also, the newest TWRP require updated hboot, so that is probably the problem there.
If you want the phone rooted, and running a custom ROM: either run a ROM that corresponds with your firmware, or s-off and update your firmware.
What hboot and radio numbers? S-on or S-off?
Click to expand...
Click to collapse
my hboot is 3.16.0 not sure about the s on and off thing but yeah iw ould love to run roms on it I tried downloading the skydragon 5.0.1 on it but it was stuck at the boot screen im using clockwork mod but I cant get twrp back on because I cant boot into the phone and ive tried everything to install the drivers and ive tried to manually install them also but no luck if you can email me or something to help me out it would be great!! [email protected]
Jduncan312 said:
my hboot is 3.16.0 not sure about the s on and off thing but yeah iw ould love to run roms on it I tried downloading the skydragon 5.0.1 on it but it was stuck at the boot screen im using clockwork mod but I cant get twrp back on because I cant boot into the phone and ive tried everything to install the drivers and ive tried to manually install them also but no luck if you can email me or something to help me out it would be great!! [email protected]
Click to expand...
Click to collapse
Holy run-on sentence! Seriously, please take the time to type a proper response with punctuation. Making it easier to read, makes it easier for me to help you. And that is what you want, isn't it???
I don't use my personal email for this type of support. That is what these forums are for.
Skydragon is probably not "stuck" but rather taking an extremely long time to boot (10+ minutes) with no boot animation, which often leads folks to believe its stuck altogether. If you leave it alone, it will probably boot eventually, but you may also find that WiFi is broken. Both are symptoms of the wrong firmware for the ROM you flashed.
Your hboot number also indicates that you don't have the right firmware installed, as firmware includes hboot as well as radio, WiFi, Bluetooth, and other modules.
On the AT&T variant, you will not have any "official" way to update the firmware to anything more up-to-date than 2.x firmware (hboot 3.17). You need 4.x firmware (hboot 3.19) to run the ROM you mentioned. Therefore you need s-off by sunshine (if not s-off already).
You can check s-on or s-off by booting into bootloader, and you will see it says one of the other near the top of the screen.
Alternately, if you don't s-off, you can flash a ROM that corresponds to your firmware. Try the following ROM, but putting the ROM zip on a removable SD card using a card reader connected to your computer (if you have those available). Then boot into recovery,navigate to the file and flash: http://forum.xda-developers.com/showthread.php?t=2705640
Aside from that, you should really get your USB connectivity issue sorted out. You can't do much without it. Verify no response when you type fastboot devices when the phone is in fastboot mode. If it doesn't respond (should return device ID) then try a different USB cable, and different USB port. If on Windows, try going to Device Manager, finding the phone, and pick the option to manually select the drivers, than pick the USB MTP drivers (not the HTC ones). This will often fix adb/fastboot connectivity issues.
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help