[Q] Trouble flashing ROM, believe is due to S-OFF - HTC EVO 3D

Hello. So I've tried multiple times flashing ROMs to my device, and have always had problems somewhere along the line. The furthest I got was successfully flashing this ROM, but it ended up in a boot loop. I believed it was due to my device being S-ON, even though I've successfully rooted and unlocked my bootloader via HTCdev and thus I've been attempting to get S-OFF. I tried JuopunutBear but got an error message related to checking my adb and fastboot drivers (Which I'm fairly sure are up to date and working) and I think the problem is I am on HBOOT 1.57. I've been attempting to downgrade using this guide (Which uses Revolutionary to get S-OFF in which case I wouldn't need JuopunutBear). I only got a bit of the way in, however, before I got stuck. After relocking my device it tells you to put the RUU zip on your device, but my computer isn't detecting my device and I'm stuck in the bootloader. I've tried shutting it off, trying all the options in the bootloader, taking out the battery, entering commands into adb, and probably some other things I've forgot, but I'm still stuck on the bootloader and my device isn't detected at all on my computer (Either in command prompt or in the explorer window).
Essentially what I'm asking here is:
How do I get my phone unstuck from bootloader?
Do I need S-OFF to be able to flash ROMs?
If I don't need S-OFF, what was I doing wrong? Should I try a different ROM?
And I suppose I may as well ask if that's a worthwhile ROM. I want something that optimizes my device and allows for custom themes, but otherwise I'm not too picky.
Specs:
Windows Vista (With ADB and fastboot, as well as HTC Sync and other phone drivers. Essentially I think I have all the software I'd need installed.)
HTC EVO 3D CDMA with Virgin Mobile as the carrier.
HTCdev unlocked bootloader
S-ON
HBOOT 1.57
Stock ROM
4ext recovery
Any and all help would be greatly appreciated!
(Also I apologize if I didn't give all the information needed or if I posted this in the incorrect spot. I figured this would be the most appropriate spot since although I have issues with specific processes it's also a fairly general request for help.)
UPDATE: I tried re-unlocking my phone using HTCdev so I'm no longer stuck in bootloader. I'm going to be trying the HBOOT Downgrade Toolkit guide again sometime today or tomorrow to see if I can get it working. I think one of the problems before was that I didn't put the RUU on the sdcard beforehand and then my device wasn't being recognized so i couldn't put it there then. If I put it on beforehand I should be able to update successfully and get past the step I was stuck on before.

If you're son u can only flash sence ROMs.
Sent from my PG86100 using xda app-developers app

cj_302 said:
If you're son u can only flash sence ROMs.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Er, I'm not quite sure what you're saying here.
UPDATE: I tried re-unlocking my phone using HTCdev so I'm no longer stuck in bootloader. I'm going to be trying the HBOOT Downgrade Toolkit guide again sometime today or tomorrow to see if I can get it working. I think one of the problems before was that I didn't put the RUU on the sdcard beforehand and then my device wasn't being recognized so i couldn't put it there then. If I put it on beforehand I should be able to update successfully and get past the step I was stuck on before.

It will be your hboot causing the problems.
Most recoveries allow you to mount usb storage so you can use that option to connect to your pc and move the ruu across without removing your sdcard etc.
Download G Cloud Backup for Android, up to 8 GB Free.Use this code: [KWLYRO] at signup and we'll both earn space: https://play.google.com/store/apps/details?id=com.genie9.gcloudbackup

Related

root evo 3d hboot 1.5 help?

i have tried everything possible with this phone to root it and nothing. Was wondering if someone would help me out??
I feel your pain and I've try the HTC dev. unlock with no luck I'm coming from the OG evo which was really easy to root ..
Sent from my PG86100 using XDA Premium App
go to htcevohacks.com i hace hboot 1.5 and it worked perfectly if u have the newest upgrade tho i dont think they have a root method out yet
Htcevohacks is easiest . And with the newest ota its still hboot 1.5
Sent from my PG86100 using XDA App
brandonaspencer said:
i have tried everything possible with this phone to root it and nothing. Was wondering if someone would help me out??
Click to expand...
Click to collapse
It would help us if you told us exactly what problems you are having.
Cool!! thanks!!
Sent from my PG86100 using XDA Premium App
Look at the roll up stickies. The directions are pretty clear. HTC method is going to be your only option
Sent from my Galaxy Nexus using XDA App
Rooting phone
brandonaspencer said:
i have tried everything possible with this phone to root it and nothing. Was wondering if someone would help me out??
Click to expand...
Click to collapse
have kinda problems have you had with rooting your phone.
HTC evohacks is very easy thanks !! For the help : )
Sent from my PG86100 using XDA Premium App
yami951 said:
Look at the roll up stickies. The directions are pretty clear. HTC method is going to be your only option
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
I agree
Sent from my PG86100 using xda premium
Trying to root using HTC 1.5 with no success.
Hi to all I have tried to root using the HTC boot unlocker with no success. I was using the step by step instructions from HTC evo hacks. I got to the step at the command prompt where I put in the unlock code and I got this : C:\rootevo3dnew>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.152s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.007s]
finished. total time: 0.161s
The phone screen asking me to unlock the bootloader never came up. Any help would be appreciated. BTW I have rooted at least 7 EVO 3D's. with no problems.
I'm stumped.
lilal100 said:
The phone screen asking me to unlock the bootloader never came up. Any help would be appreciated. BTW I have rooted at least 7 EVO 3D's. with no problems.
Click to expand...
Click to collapse
See the Guide/flashing Notes in my signature. You need to rerun the currently installed "FULL" Ruu or the the Latest RUU, then the unlock will work.
I did the HTCDev and unlocked it went to thread on downgrade from 1.5 hboot to 1.4 tried that and it did not work. I went to try the wire trick and this is what I get when I try to use the controlbear. the phone connects and goes through process but says the following...
======== ControlBear 0.6 beta for JuopunutBear S-OFF ==========
Starting up......
Connecting to device...
Searching device.....
Found device.....but device has no root!!
Press ENTER to exit.....
Any help would be helpful I have tried superuser but wont install, tried rootevo3dnew, temproot sensation Ect. everything says I need to be rooted.
I am running stock rom that shipped with phone and yes I did updates. I am Sprint CDMA 2.17 rom shipped, 1.5 Hboot. I have flashed roms and modded before but dont consider myself to be advanced. I have done flashing and installing roms with my old HTC Touch pro2 but alot easier on touch pro2 LOL... Please point me in the correct place I have beeen all over from this thread to that one and back and forth and yes I have search threads and I have tried them but still come back to the one with wire trick.. I am 1.5 with S-ON
inkjammer said:
I did the HTCDev and unlocked it went to thread on downgrade from 1.5 hboot to 1.4 tried that and it did not work. I went to try the wire trick and this is what I get when I try to use the controlbear. the phone connects and goes through process but says the following...
======== ControlBear 0.6 beta for JuopunutBear S-OFF ==========
Starting up......
Connecting to device...
Searching device.....
Found device.....but device has no root!!
Press ENTER to exit.....
Any help would be helpful I have tried superuser but wont install, tried rootevo3dnew, temproot sensation Ect. everything says I need to be rooted.
I am running stock rom that shipped with phone and yes I did updates. I am Sprint CDMA 2.17 rom shipped, 1.5 Hboot. I have flashed roms and modded before but dont consider myself to be advanced. I have done flashing and installing roms with my old HTC Touch pro2 but alot easier on touch pro2 LOL... Please point me in the correct place I have beeen all over from this thread to that one and back and forth and yes I have search threads and I have tried them but still come back to the one with wire trick.. I am 1.5 with S-ON
Click to expand...
Click to collapse
Ok, let's make sure we know where you are at to start with. When you use the vol and power button to boot to fastboot, does the phone show "unlocked". If not, I think you need to do the htc method again. I have not kept up recently, but I am not sure there is any method other than the HTC method that works every time for 1.5. I have used the HTC method on two phones without a problem, so that is the method I use.
Once you get that far, I used adb to push or flash the twrp image into the recovery section of the phone. Then you should be able to flash superuser via the install menu of twrp. There are threads that have detailed explanations on how this is done.
Yea, I had a bit of a learning curve from my TP2 also, but love this phone!
sonza said:
Ok, let's make sure we know where you are at to start with. When you use the vol and power button to boot to fastboot, does the phone show "unlocked". If not, I think you need to do the htc method again. I have not kept up recently, but I am not sure there is any method other than the HTC method that works every time for 1.5. I have used the HTC method on two phones without a problem, so that is the method I use.
Once you get that far, I used adb to push or flash the twrp image into the recovery section of the phone. Then you should be able to flash superuser via the install menu of twrp. There are threads that have detailed explanations on how this is done.
Yea, I had a bit of a learning curve from my TP2 also, but love this phone!
Click to expand...
Click to collapse
I am unlocked I did the HTC Dev and unlocked it. I have a stock rom (the one shipped on phone) all I have done is unlock it... I did try the controlbear and got what I posted on last post. I am Hboot 1.5 S-ON and stock rom is 2.17.651.5 HTC Sense 3.0 ANDROID Ver. 2.3.4... Like I said all I have done is Unlock and installed TWRP 2.2 and created a restore point and created a recovery and backed up my phone. All through Goo Manager. That is all I have done.
inkjammer said:
I am unlocked I did the HTC Dev and unlocked it. I have a stock rom (the one shipped on phone) all I have done is unlock it... I did try the controlbear and got what I posted on last post. I am Hboot 1.5 S-ON and stock rom is 2.17.651.5 HTC Sense 3.0 ANDROID Ver. 2.3.4... Like I said all I have done is Unlock and installed TWRP 2.2 and created a restore point and created a recovery and backed up my phone. All through Goo Manager. That is all I have done.
Click to expand...
Click to collapse
In my post Ive included a flashable SuperSU zip. What youll need to do is boot to recovery and install this zip. Then reboot. You should have superuser access then.
Still learning this forum so excuse any errors I make. I've spent the last 10 hours trying to fix the mess I created on my wife's Evo 3d. I was able to root my phone and it was relatively easy so I tackled hers as well and have gotten a bootloop I cannot figure out, 10 hours later. I'm on hboot 1.5. I unlocked the phone (using a pretty reliable video), loaded 4EXT Recovery then tried to load roms. Everything worked fine until the rom-loading portion. Since then, the phone loops, but once or twice it made it all the way to the main screen and before I could slide the ring, a read error message appeared next to the bars of service then the phone just completely reboots. Right now, the only thing I can get into is the bootloader and the clockworkmod v4.0.1.4, somehow I lost my 4EXT Recovery. I'm stuck and in dire straights as my wife is going out of town and will KILL me if I don't fix her phone. Please help! BTW, somehow I managed to NOT back anything up (stupidity on my part). Will I be able to get this thing back to stock at least or is it now a paperweight?
user22410 said:
Still learning this forum so excuse any errors I make. I've spent the last 10 hours trying to fix the mess I created on my wife's Evo 3d. I was able to root my phone and it was relatively easy so I tackled hers as well and have gotten a bootloop I cannot figure out, 10 hours later. I'm on hboot 1.5. I unlocked the phone (using a pretty reliable video), loaded 4EXT Recovery then tried to load roms. Everything worked fine until the rom-loading portion. Since then, the phone loops, but once or twice it made it all the way to the main screen and before I could slide the ring, a read error message appeared next to the bars of service then the phone just completely reboots. Right now, the only thing I can get into is the bootloader and the clockworkmod v4.0.1.4, somehow I lost my 4EXT Recovery. I'm stuck and in dire straights as my wife is going out of town and will KILL me if I don't fix her phone. Please help! BTW, somehow I managed to NOT back anything up (stupidity on my part). Will I be able to get this thing back to stock at least or is it now a paperweight?
Click to expand...
Click to collapse
Your not bricked by any means. And Im going to guess you tried to boot an ICS rom.. dont. They dont work with hboot 1.5. If you really want to go back to stock run the 2.17 RUU and youll be back to where you started. Another option is to download a GB rom and flash that. Not ICS. If your able to get to the bootloader than you can still load up 4ext recovery so you can flash the GB rom.
Edit: some hboot 1.5 users are lucky and can flash them if they used the correct VM firmware but majority of users have problems.
NineInchNails said:
Your not bricked by any means. And Im going to guess you tried to boot an ICS rom.. dont. They dont work with hboot 1.5. If you really want to go back to stock run the 2.17 RUU and youll be back to where you started. Another option is to download a GB rom and flash that. Not ICS. If your able to get to the bootloader than you can still load up 4ext recovery so you can flash the GB rom.
Edit: some hboot 1.5 users are lucky and can flash them if they used the correct VM firmware but majority of users have problems.
Click to expand...
Click to collapse
Thanks, I just tried flashing a rom that has taken it back to stock but I'm still in the bootloop. Should I stop flashing and simply locate the RUU?
22410,
It sounds like the kernel did not flash correctly with 4ext Recovery (next time, make sure u indicat S-on in its settings). I'm not sure if you were just stock 2.17 rooted or not, but use 7zip on your pc to open & extract/copy out the "boot.img" file from the rom, zip, etc you were using and copy it to your fastboot pc folder. Still have the Cwm 4.0.1.4 recovery.IMG file there too right (or the 4ext recovery.img file)? Ok...
- put phone in fastboot usb mode
From PC's fastboot command prompt type:
- " fastboot flash boot boot.img "
(this will reflash the kernel/boot image extracted from a rom)
If your recovery is screwed up:
- " fastboot flash recovery YourRecoveryFilename.img "
(ie: cwm_4.0.1.4_recovery.img or recovery.img, etc as listed in fastboot folder, to reflash a recovery to your phone).
With S-on, to properly enter a recovery for flashing ANYTHING you must:
- " fastboot boot YourRecoveryFilename.img "
(doesn't apply if using 4ext's Smartflash or TWRP's Dumlock settings. But you must have a bootable android OS/kernel first, once the flash is screwed it won't work).
If u have a Sprint CDMA EVO3D/HTC Unlocked & S-on (not Jbear s-Off), then the guide in my signature has more info.
Edit: as NIN said you will likely have problems flashing ICS roms with S-on (hboot version doesn't matter). If u are still unlocked & have a working recovery u can flash any gb Rom successfully after wiping system, data, & cache (or run superwipe zip). Meanrom GB v4.5 recommended.
Sent from my "Up all night, Sleep all day" EVO3D!

need help for stock return

I am an unfortunate rookie, and have made mistakes, hence the name. I want to return my phone to stock from htcdev unlock, s-on, hboot 1.5. with a boot loop on meanom ICS for the evo 3d. I have tried to use older ruu shooters. Relock with fastbot oem lock, and then pg86img. However with the bootloop I can not access anything unless I unlock again, and then go into recovery. This is all that I can think of at the moment that might help.
Kill the rookie!!! PLEASE HELP!!
I had much the same problem with my cdma, hboot 1.5, S-On shooter. When I was S-On none of the ICS roms would work. The all bootlooped on me. If you follow the rooting method found here on xda, it will get you back to a stock Rooted GB Rom.
go into hboot -> fastboot USB-> run command dos -> fastboot cwm-4.0.1.4-shooter.IMG -> flash the 2.17 firmware-> enjoy.
I had to S-off with Juopunutbear, then re-run that root/flash to get past the bootloops.
Sent from my Shooter using xda app-developers app
Unfortunately I have tried that and it still is not working.
My only suggestion would be to try it a few times, other then that, its above my head.
Sent from my shooter using xda app-developers app
rookiemistake said:
I am an unfortunate rookie, and have made mistakes, hence the name. I want to return my phone to stock from htcdev unlock, s-on, hboot 1.5. with a boot loop on meanom ICS for the evo 3d. I have tried to use older ruu shooters. Relock with fastbot oem lock, and then pg86img. However with the bootloop I can not access anything unless I unlock again, and then go into recovery. This is all that I can think of at the moment that might help.
Kill the rookie!!! PLEASE HELP!!
Click to expand...
Click to collapse
Have you tried one of the ruu exe files that you run from your computer? If you are trying to go stock, you should be able to relock the bootloader and run the ruu and that's it.
Sent from my ICS 3VO with Tapatalk 2
First of all I want to thank everyone that has been attempting to assist me with my problem. I have tried to relock since I am on htcdev unlock and then run an ruu force via my computer. I get an installation aborted error when trying to flash pg86img via recovery. I don't know what else to say.
You can't flash a bootloader zip from recovery. You have to flash it from hboot. Also make sure the zip is named correctly "PG86IMG.zip" without the quotes. Also make sure the zip is on the root of your sd as in not in any folders. Once you've named the zip correctly and placed it correctly then power off the phone. Hold down the volume down button and tap the power button. You should boot into the bootloader wait until the phone recognizes the zip and follow the on screen instructions. Hopefully this helps.
#Root-Hack_Mod*Always\=LTE
Thank you again. I tried your directions, it did recognize the pg86img. However it did not give me any instructions to follow. It did however allow me to be able to a partial stock state. My software version is still on the teamgenesis sense v2.9 cdma. Although I do like some of the features on this rom, I would still like to be able to get the OTA of ICS when it is released. Any suggestions?
rookiemistake said:
Thank you again. I tried your directions, it did recognize the pg86img. However it did not give me any instructions to follow. It did however allow me to be able to a partial stock state. My software version is still on the teamgenesis sense v2.9 cdma. Although I do like some of the features on this rom, I would still like to be able to get the OTA of ICS when it is released. Any suggestions?
Click to expand...
Click to collapse
To get the ota release (if it ever comes ) I do believe you will need to be locked and running the existing gingerbread rom. While I am not positive, I think the system uses the props file to determine if an update is applicable, and it will likely not recognize the teamgenesis rom version as being upgradeable.
Now I will likely get flames for saying this, but if you want to put the meanrom v2.4 of ICS on the phone, it can be done with s-on, you just need to follow the correct process. I ran that rom for a while, and it is very stock like, stable, and has a few enhancements that you will not find on a non-rooted stock rom. I never found anything wrong or not working with that rom.
To get it to load, first I downloaded flashimagegui from market, put the meanrom zip file on the sd card and made sure I had a recovery that I could get into. I am using TWRP v2.1.1, lots of folks talk about others like ext4, and I am only going to say use whichever you like, after all it is your phone.
Then with the phone unlocked via the htc method, I started the flashimage app, and browsed to the meanrom file. It extracted the kernel and flashed it. Once that was done, with clear cache buttons selected, rebooted to recovery, and used the install menu selection of TWRP to again flash the same rom file. Once it flashed the file, selected clear cache and dalvik just to be safe, selected reboot system, and it worked great.
Have a great weekend.
So, apparently I am still doing something wrong. I have put the pg86img on the root, relocked to the bootloader, and let it run it's course. However, it will get through with reading it and stops and does not finish anything with loading the system information. I have also tried to run the ruu via usb connection. I keep running into a c++ issue saying runtime error. I have wiped everything and thankfully I did make a backup of the rom and other information that I was runing so I can currently fall back on that.
I am on hboot 1.5, 2.17, and teamgenesis ICS rom for evo 3d.
Apparently there have been rumors that Sprint has finally released the ICS OTA, not that it really matters anymore, but I have run into a few interesting glitches, such as WIFI not staying connected while asleep or disconnecting.
If I have to I am willing to pay to do a netmeeing with someone in order to be able to fix this.
Sorry if it sounds like I am getting frustrated, but I have tried every walkthrough that I have found and have not had any luck with any of them.
Please help.
I forgot to say I am s-on

This bootloop on HTC splash screen has me stumped...

Alright. 3 days and countless hours researching to avoid getting flamed - i've reached my last resort.
I've got an unrooted Thunderbolt on my hands that is stuck in a bootloop. The HTC splash screen is all I can get aside of getting into HBOOT. Factory reset and recovery from the bootloader puts me right back into the boot loop. Ive tried flashing CWM via PG05IMG and it recognizes it but does not prompt me to go through with the install. I can't get ADB to recognize the device because USB debugging is apparently disabled. I have HTC SYNC process/application disabled (tried it enabled as well) and I have revolutionary's HTC driver installed (After it not working prior to its installation -- im getting desperate at this point). I am getting the click noise through my computers audio when I plug in the device to the computer, so I know its at least partially getting recognized - however, I cannot find it in my device manager. Im on WIN7. I have removed SIM and SD. Tried different of each cards. Verified MD5's of all files including the the latest OTA non-root RUU I tried to flash via bootloader (for the record this was my first step to troubleshoot the issue). When I attemped to flash the non-root OTA RUU it checked the file with the little side bar escalating and then brought me right back to the hboot screen with options
Here is the info I have. I was given this phone by someone who didn't want to mess around with trying to get it work, so as far as I know, its not rooted. In fact, im almost positive its all stock, or was. I really hope im missing something silly here. I just can't figure this one out.
MECHA XD SHIP S-ON
HBOOT-1.04.0000
MICROP-/
RADIO-1.48.00.0906w_1
eMMC-boot
Thanks.
-Andrew
EMMC?
I've tried re-balling that EMMC chip also, forgot to mention that. I may need a new one entirely according to some other posts...
Have you tried clearing caches ?
Sent from my ADR6400 using Tapatalk 2
So...you've spent three days trying to flash something to a phone with S-ON?
have you tried...getting S-OFF (root) first?
just sayin'
gcodori said:
So...you've spent three days trying to flash something to a phone with S-ON?
have you tried...getting S-OFF (root) first?
just sayin'
Click to expand...
Click to collapse
can't w/o booting, can htc unlock though but it wont help
trter10 said:
can't w/o booting, can htc unlock though but it wont help
Click to expand...
Click to collapse
Everything you say you are trying to do will not work without root. Can't change the bootloader without it...can't install custom recovery without unlocked bootloader. I might have that backwards, but in any case the only thing that might get you out of looping is to flash a .ruu file in bootloader. If you search the forums, you should find a link to one. A .ruu is a full system image file for the stock vzw t bolt ROM. You will loose all info on your phone (not sd card) but that might do it for you.
remove sd card from phone. back it up and format completely. install into phone.
use the HTC thunderbolt all in one program and see if the phone is recognized. if it is...use it to gain root and s-off. from there you can flash a recovery or go completely back to stock and s-on if you need.

[Q] Recovery help :D

So... was running the MikVirgin ICS rom on my S-on 1.50 Evo 3d. Was going to bring it back to scratch and go through the S-Off process to run something better. I have Revolutionary 4.0.1.4 installed and fastboot on my computer. For the life of me, I cannot get the phone to accept anything now :\ Trying to run the RUU gives me the 170 error and any rom I try loops at the boot loader (not the white HTC screen, but the boot image for the rom).
Help would be appreciated
bl4ckllama said:
So... was running the MikVirgin ICS rom on my S-on 1.50 Evo 3d. Was going to bring it back to scratch and go through the S-Off process to run something better. I have Revolutionary 4.0.1.4 installed and fastboot on my computer. For the life of me, I cannot get the phone to accept anything now :\ Trying to run the RUU gives me the 170 error and any rom I try loops at the boot loader (not the white HTC screen, but the boot image for the rom).
Help would be appreciated
Click to expand...
Click to collapse
The 170 error is normally a USB connectivity issue caused by a bad USB cable or Windows driver problems. You also need to have your bootloader relocked if you are S-ON.
See this post for RUU.exe troubleshooting steps. If you planning to get S-OFF you might be interested in trying my guide.
ramjet73
ramjet73 said:
The 170 error is normally a USB connectivity issue caused by a bad USB cable or Windows driver problems. You also need to have your bootloader relocked if you are S-ON.
See this post for RUU.exe troubleshooting steps. If you planning to get S-OFF you might be interested in trying my guide.
ramjet73
Click to expand...
Click to collapse
Yeah, I've tried it in Relocked status, and still no go. Even under fastboot USB (and I made sure the drivers are there) it won't recognize the phone is attached. I've factory wiped and I'm going to try and re-install the Mikvirgin rom again.
bl4ckllama said:
Yeah, I've tried it in Relocked status, and still no go. Even under fastboot USB (and I made sure the drivers are there) it won't recognize the phone is attached. I've factory wiped and I'm going to try and re-install the Mikvirgin rom again.
Click to expand...
Click to collapse
Have you tried another cable and/or PC?
ramjet73
I had a similar (not identical) problem, and I solved it by pulling the zip out of the exe by letting it run without plugging the phone in and then looking through the folders in my temp folder until I found rom.zip. Renamed it PG86IMG, put it on my sd card, re locked with fastboot, and boom! Phone rescued.
Sent from my Nexus 7 using xda premium
Was finally able to get it loaded with an ICS rom after doing a factory reset, installing the rom, and then manually installing the boot file through fastboot. Maybe I'll try again tomorrow, doing the s-off procedure first Thanks for the input all!

Verizon htc droid 4g lte

I have the verizon htc droid 4g lte and I am running viper 2.2 with the twap recovery, but my phone can no no longer be seen
with the unblocking tool that I use to get the bootloader unlocked with the first time. when I hook it up to my computer, I can
see both my internal and external card, and I can even read and write to them, but when it comes to the programs recognizing
my phone like they did before, they want. They will no longer recognize my phone. I can flash a few roms,but nothing that requries me to be s-off.
I tried 10.1, but the phone gets stuck when installing the appz part of the rom. So, I am guessing, it must be because I am not s-off. I want to get to s-off now,but I can't.
Any advice would be great. thanks.
MR_PERFECT said:
I have the verizon htc droid 4g lte and I am running viper 2.2 with the twap recovery, but my phone can no no longer be seen
with the unblocking tool that I use to get the bootloader unlocked with the first time. when I hook it up to my computer, I can
see both my internal and external card, and I can even read and write to them, but when it comes to the programs recognizing
my phone like they did before, they want. They will no longer recognize my phone. I can flash a few roms,but nothing that requries me to be s-off.
I tried 10.1, but the phone gets stuck when installing the appz part of the rom. So, I am guessing, it must be because I am not s-off. I want to get to s-off now,but I can't.
Any advice would be great. thanks.
Click to expand...
Click to collapse
Presumably, your bootloader is still unlocked? Rather than using a script or automated tool, follow the manual procedure in this thread for Part 2: Apply SuperCID. After this, reboot your phone to the bootloader and verify SuperCID with fastboot getvar cid, it should return 11111111. Once this is verified, you can follow the instructions for Facepalm S-OFF. Finally, after achieving S-OFF, revert your CID to normal again using the manual instructions for Part 6: Revert your CID to stock.
BTW, use a more meaningful title next time and this post belongs in the q&a/troubleshooting section, not general.

Categories

Resources