Related
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Pulsewave said:
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Click to expand...
Click to collapse
Not sure about the Amaze tbh, but if I had a failed flash on either of my HTC phones, I just re RUU'd.
D'oh! I forgot about that! Had to do that for my buddy's thunderbolt a few times. Lemme give that a shot and I'll report back
Edit: Worked
Edit:double post
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Bricked Htc Amaze 4g
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I can get into recovery but it wont let me flash anything.Thanks to whoever replies I really appreciate it.
lmfaoomg said:
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Click to expand...
Click to collapse
You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
samiaziz said:
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I really appreciate it.
Click to expand...
Click to collapse
Same with you. You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
Superwiping the phone removes all the data from the old ROM so you can install a fresh clean ROM.
If you want to install the RUU, you have to relock the bootloader first and then you can reflash the original RUU
Edit: i was misinformed
Sent from my NRGized Amaze...
via xda premium
aj_2423 said:
I dont believe u have to relock
Sent from my NRGized Amaze...
via xda premium
Click to expand...
Click to collapse
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
If the phone wont go into recovery, you have to use ADB and wipe the cache partition for it to go into recovery again. This is apparently a bug with some of recoveries posted by other devs in the development forum. You need to use fastboot.exe to wipe the cache via adb
And if... If the superwipe doesn't work due to recovery version you have try to boot in to your Bootloader run one of hasoon's tool and choose different recovery.. it did happen to me the bootloop before due to the fact the old roms like mike's rom. he doesn't update his script to support the newer recoveries and it doesn't support X's recovery, it will give you an error installation.. just try different recoveries and for sure your problem will be solved..
just make sure boot in your bootloader/H-boot then run hasoon's tool and have enough battery just to make sure...
hasoon2000 said:
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
Click to expand...
Click to collapse
Thanks for the good info Sir but i my HTC Amaze is bootloader locked and S-ON but i cannot find a RUU for T-mobile to unbrick it. Will a Ruu such as this one work?
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.550L.17DC_30.68.550L.09_release_227343_signed.exe
My HTC Amaze scans all the versions of the PH85IMG i place on the sd card but goes back to the menu when its down
any advice that could help i will appreciate!
There's a thread in the dev section that has about a dozen RUUs. I don't see how one can miss it.
Thanks for your reply but i was a little unsure and did not want to make my phone any worst than it already is.
Can you explain 1 thing thing for me please - RUU always you to flash the phone via the computer? where as PH85img.zip allows you to flash the phone via sdcard? I hope i am correct here.
but i want to know how can i flash the phone when its connected via HBoot usb cause my pc recognizes it as "Android Composite ADB Interface"
Currently this is what is on my lcd
LOCKED
RUBY PVT SHIP S-ON RL
HBOOT-1.93.0002
EMMC BOOT
MAR 15 2012
i have tried several PH85img.zip files but the phone just scans them and goes back to the menu.
Some help will be appreciated extremely.
---------- Post added at 03:40 PM ---------- Previous post was at 03:33 PM ----------
I forgot to mention it connects to the pc but when i run command adb devices this is what i get
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\rquinlan.GOSL_DOM>adb devices
List of devices attached
C:\Documents and Settings\rquinlan.GOSL_DOM>
The latest ruu would be your best option, do not put the .zip part of the name since its already there, also a ruu may be an exe or zip file, since it is a complete stock file to restore the device, what would your carrier be to be exact? Just not up to reading through everything in this thread to see if you mentioned that piece of info, if its tmobile then the very first file in the stock ruu/ota thread would be the file you need.
Sent from my iPad using Tapatalk HD
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Linkzz said:
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Click to expand...
Click to collapse
Why are you using recovery exactly?
RUU's are to be flash via hboot, which is the very first screen you see when you go into the device's bootloader, in the case of exe files, you'll need to flash it via fastboot mode, which happens to be, correct me if I'm wrong, the very first or second option on the hboot menu.
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Linkzz said:
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Click to expand...
Click to collapse
What carrier are you on?
t-mobile
this is the RUU i tried and made a connection but the PH85img.zip are not working no matter how i try
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.55 0L.17DC_30.68.550L.09_release_227343_signed.exe
Gave my Evo 3d to my borother a few months back, but hes come back to me today saying it was stuck in bootloop.
He booted into the bootloader and did a factory reset, but it was still stuck in bootloop.
I tried to get into recovery to flash a new rom, but when i select recovery from the bootloader, that also goes into a bootloop.
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Not sure if its important but the phone is s-off. Any ideas on whats going on or how to fix?
Apologies, supposed to put this in Q&A forum
While you're at bootloader, connect USB and then flash a stock RUU.
androidcdma said:
While you're at bootloader, connect USB and then flash a stock RUU.
Click to expand...
Click to collapse
Thanks for the reply. Will i lose s-off with this?
Tones1971 said:
Gave my Evo 3d to my borother a few months back, but hes come back to me today saying it was stuck in bootloop.
He booted into the bootloader and did a factory reset, but it was still stuck in bootloop.
I tried to get into recovery to flash a new rom, but when i select recovery from the bootloader, that also goes into a bootloop.
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Not sure if its important but the phone is s-off. Any ideas on whats going on or how to fix?
Apologies, supposed to put this in Q&A forum
Click to expand...
Click to collapse
You didn't say what version of the Evo 3D you have (CDMA or GSM) or what bootloader is installed, but if it's a Sprint CDMA model I would recommend flashing the Sprint ICS RUU.exe from Windows after putting the phone into fastboot mode in the bootloader. You may have to relock the bootloader with the "fastboot oem lock" command first if it shows "***UNLOCKED***" at the top of the screen.
That will fix a lot of problems, especially when the phone is in an indeterminate state. After flashing the RUU you can HTC unlock, flash a custom recovery and then root the stock ROM or flash a rooted ROM.
ramjet73
Sorry it is a UK GSM (Europe). I have revolutionary bootloader installed. Got an RUU to try now thanks.
androidcdma said:
While you're at bootloader, connect USB and then flash a stock RUU.
Click to expand...
Click to collapse
Tones1971 said:
Thanks for the reply. Will i lose s-off with this?
Click to expand...
Click to collapse
^^^^ He got it first with the short version.
No, you won't lose S-OFF and won't need to relock the bootloader first if that's your current status.
And if it's a GSM model everything still applies, you just need a different RUU, which you already have.
ramjet73
Thanks ramjet. Thought this was going to be straightforward but cant get ruu to install. Error 170. Ill keep plugging away / googling away, hopefully come up with something
Tones1971 said:
Thanks ramjet. Thought this was going to be straightforward but cant get ruu to install. Error 170. Ill keep plugging away / googling away, hopefully come up with something
Click to expand...
Click to collapse
Error 170 means that the RUU utility can't find the phone. There's a readme.doc for running the RUU here, and the error codes are towards the end of that.
Are you putting it into "fastboot" mode in the bootloader, which should change to "fastboot usb" when it is connected to a computer? You also need to have the HTC USB drivers active, which can be accomplished by installing HTC Sync.
ramjet73
Tones1971 said:
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Click to expand...
Click to collapse
adb push into a bootlooping phone?
do you have the drivers for the phone? (if not download and install HTC Sync as they come with it)
did you try flashing a custom recovery img through fastboot? (go to bootloader select fastboot, connect USB, type "fastboot flash recovery nameOfYourRecoveryImg.img")
Yeah have tried installing custom recovery through fast boot again, and im in fastboot ok when trying to run the RUU. Also have HTC Sync installed from when i had the phone.. Drivers seemed to be ok as i was able to install the custom recovery with adb, alhough i still got bootloop after that.
Ive a few other things to try when i get home from work. Im sure it shouldnt be too difficult to resolve. Hopefully anyway.
Well this isnt going smoothly at all. Used another PC and was able to get the RUU to run.
However it now comes up with Error 131 Customer ID problem. The RUU was for HTC Europe (non branded). The phone was sim free. When i posted months back my cid was HTC_001. I checked it here: http://forum.xda-developers.com/showpost.php?p=22394863&postcount=172
However now when i get my CID it is showing as CID0202. Any way i can get an RUU to install? Any idea how a CID could change?
EDIT: noticed i used a different command last time.
fastboot getvar cid shows CID0202
adb shell getprop ro.cid now shows device not found (previously showed CID_001)
Thats typing both commands in same window, one after the other. One gets CID0202, the other device not found???
There's a change cid command in fastboot, fastboot oem writecid or something along those lines... however i believe the cid check is in the updater scripts of the ruu in which case a fastboot flash of all the img files should avoid it entirely... i don't remember the procedure for extracting the img files from the ruu but i believe ur supposed to run it and then dig through your temp files...
dessolator666 said:
There's a change cid command in fastboot, fastboot oem writecid or something along those lines... however i believe the cid check is in the updater scripts of the ruu in which case a fastboot flash of all the img files should avoid it entirely... i don't remember the procedure for extracting the img files from the ruu but i believe ur supposed to run it and then dig through your temp files...
Click to expand...
Click to collapse
Thanks for this. Ill see if i can find anything else out about it. So saves running the RUU exe and no cid check done then?
Need to bump this as im not getting anywhere. No RUU's will install, error 31 customer error. Have flashed recovery via ADB and through PG86IMG.ZIP, but still cant get in to recovery as it just continually reboots.
S-OFF with revolutionary. Anybody any ideas please?
Got bigger problems than i thought. Finally got an RUU to install after 4 days of trying, by first using fastboot oem writecid 11111111. But when the phone rebooted it was back bootlooping again. Is there any hope for my phone?
Tones1971 said:
Got bigger problems than i thought. Finally got an RUU to install after 4 days of trying, by first using fastboot oem writecid 11111111. But when the phone rebooted it was back bootlooping again. Is there any hope for my phone?
Click to expand...
Click to collapse
You need to stop cross posting in the d3rp Q&A thread and your own thread if you want more help. Cross-posting is stongly discouraged on XDA and it's really confusing when you are asking for help in one thread while getting different advice in another.
It sounds to me like all the CID changes on your phone have left it in an indeterminate state and I'm not sure at this point what is the correct CID and RUU for your model. If you could detemine that, set the CID correctly and flash the right RUU the phone should work, but it might be too late if you have in fact been flashing firmware that doesn't match your phone because the right RUU may not back that out properly.
That's all I can offer at this point, but since I don't know the history of your phone and how it got the various CID's you have reported, you will probably be the one that needs to figure it out.
ramjet73
So i tired a couple JB roms and not my phone just boot loops. I can still get into recovery but no rom, tired and ICS one too, will boot. I have tried a couple HBOOTs, now on HBOOT-1.04.2000 ENG HBOOT . Says at the top Shooter XC ENG S-OFF RL....Really just trying to get back to stock.
EVO 3D CDMA on Sprint.
Any help would be greatly appreciated.
??
Anyone?
tru2life said:
So i tired a couple JB roms and not my phone just boot loops. I can still get into recovery but no rom, tired and ICS one too, will boot. I have tried a couple HBOOTs, now on HBOOT-1.04.2000 ENG HBOOT . Says at the top Shooter XC ENG S-OFF RL....Really just trying to get back to stock.
EVO 3D CDMA on Sprint.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
find your ruu and install it
http://forum.xda-developers.com/showthread.php?t=1208485
also try this link method maybe help you bro...
http://forum.xda-developers.com/showthread.php?t=1262457
otherwise bring and mobile software shop and they repair it for you just in 5 usd not more then that if you don't have warranty or taiwan version
best of luck...
Thanks..
Downloaded an RUU yesterday but my phone doesn't show up on my PC when I plug it in, then if I run RUU it does nothing. Probably cause it can't find the phone I am thinking.
tru2life said:
Thanks..
Downloaded an RUU yesterday but my phone doesn't show up on my PC when I plug it in, then if I run RUU it does nothing. Probably cause it can't find the phone I am thinking.
Click to expand...
Click to collapse
Download the zip from http://forum.xda-developers.com/showthread.php?t=1889438
It includes the ruu again and the drivers to install on your computer. Install drivers on pc. Boot phone into bootloader. Hook up to computer (should say Fastboot usb). Run command "fastboot oem lock" from the command line in the folder with the fastboot exe. Then run the ruu.exe. You'll be back to stock but still s-off so you can root again easily.
Thanks I will try that.
coal686 said:
Download the zip from http://forum.xda-developers.com/showthread.php?t=1889438
It includes the ruu again and the drivers to install on your computer. Install drivers on pc. Boot phone into bootloader. Hook up to computer (should say Fastboot usb). Run command "fastboot oem lock" from the command line in the folder with the fastboot exe. Then run the ruu.exe. You'll be back to stock but still s-off so you can root again easily.
Click to expand...
Click to collapse
Ok, now I can't get it to put into recovery....plugged into laptop there would be a red light and it will turn on to boot screen, where it stays. Unplugged it won't even do that. Going to plug into the wall, maybe battery is dead? Other ideas?
coal686 said:
Download the zip from http://forum.xda-developers.com/showthread.php?t=1889438
It includes the ruu again and the drivers to install on your computer. Install drivers on pc. Boot phone into bootloader. Hook up to computer (should say Fastboot usb). Run command "fastboot oem lock" from the command line in the folder with the fastboot exe. Then run the ruu.exe. You'll be back to stock but still s-off so you can root again easily.
Click to expand...
Click to collapse
tru2life said:
Ok, now I can't get it to put into recovery....plugged into laptop there would be a red light and it will turn on to boot screen, where it stays. Unplugged it won't even do that. Going to plug into the wall, maybe battery is dead? Other ideas?
Click to expand...
Click to collapse
Are you on the hookup to computer step? To boot into bootloader, remove battery, put back in, hold volume down then hold power. Hookup to computer and it should show fastboot usb in red.
tru2life said:
So i tired a couple JB roms and not my phone just boot loops. I can still get into recovery but no rom, tired and ICS one too, will boot. I have tried a couple HBOOTs, now on HBOOT-1.04.2000 ENG HBOOT . Says at the top Shooter XC ENG S-OFF RL....Really just trying to get back to stock.
EVO 3D CDMA on Sprint.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
You may need to upgrade your firmware. Try flashing the 2.89 update firmware minus hboot and see if that helps you boot up the ICS and JB roms. You must have hboot 1.5 or less to run them though.
You got a link for this?
raptoro07 said:
You may need to upgrade your firmware. Try flashing the 2.89 update firmware minus hboot and see if that helps you boot up the ICS and JB roms. You must have hboot 1.5 or less to run them though.
Click to expand...
Click to collapse
tru2life said:
You got a link for this?
Click to expand...
Click to collapse
If you follow the steps I gave you and run the ruu, it will update your firmware too.
Hello. So I've tried multiple times flashing ROMs to my device, and have always had problems somewhere along the line. The furthest I got was successfully flashing this ROM, but it ended up in a boot loop. I believed it was due to my device being S-ON, even though I've successfully rooted and unlocked my bootloader via HTCdev and thus I've been attempting to get S-OFF. I tried JuopunutBear but got an error message related to checking my adb and fastboot drivers (Which I'm fairly sure are up to date and working) and I think the problem is I am on HBOOT 1.57. I've been attempting to downgrade using this guide (Which uses Revolutionary to get S-OFF in which case I wouldn't need JuopunutBear). I only got a bit of the way in, however, before I got stuck. After relocking my device it tells you to put the RUU zip on your device, but my computer isn't detecting my device and I'm stuck in the bootloader. I've tried shutting it off, trying all the options in the bootloader, taking out the battery, entering commands into adb, and probably some other things I've forgot, but I'm still stuck on the bootloader and my device isn't detected at all on my computer (Either in command prompt or in the explorer window).
Essentially what I'm asking here is:
How do I get my phone unstuck from bootloader?
Do I need S-OFF to be able to flash ROMs?
If I don't need S-OFF, what was I doing wrong? Should I try a different ROM?
And I suppose I may as well ask if that's a worthwhile ROM. I want something that optimizes my device and allows for custom themes, but otherwise I'm not too picky.
Specs:
Windows Vista (With ADB and fastboot, as well as HTC Sync and other phone drivers. Essentially I think I have all the software I'd need installed.)
HTC EVO 3D CDMA with Virgin Mobile as the carrier.
HTCdev unlocked bootloader
S-ON
HBOOT 1.57
Stock ROM
4ext recovery
Any and all help would be greatly appreciated!
(Also I apologize if I didn't give all the information needed or if I posted this in the incorrect spot. I figured this would be the most appropriate spot since although I have issues with specific processes it's also a fairly general request for help.)
UPDATE: I tried re-unlocking my phone using HTCdev so I'm no longer stuck in bootloader. I'm going to be trying the HBOOT Downgrade Toolkit guide again sometime today or tomorrow to see if I can get it working. I think one of the problems before was that I didn't put the RUU on the sdcard beforehand and then my device wasn't being recognized so i couldn't put it there then. If I put it on beforehand I should be able to update successfully and get past the step I was stuck on before.
If you're son u can only flash sence ROMs.
Sent from my PG86100 using xda app-developers app
cj_302 said:
If you're son u can only flash sence ROMs.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Er, I'm not quite sure what you're saying here.
UPDATE: I tried re-unlocking my phone using HTCdev so I'm no longer stuck in bootloader. I'm going to be trying the HBOOT Downgrade Toolkit guide again sometime today or tomorrow to see if I can get it working. I think one of the problems before was that I didn't put the RUU on the sdcard beforehand and then my device wasn't being recognized so i couldn't put it there then. If I put it on beforehand I should be able to update successfully and get past the step I was stuck on before.
It will be your hboot causing the problems.
Most recoveries allow you to mount usb storage so you can use that option to connect to your pc and move the ruu across without removing your sdcard etc.
Download G Cloud Backup for Android, up to 8 GB Free.Use this code: [KWLYRO] at signup and we'll both earn space: https://play.google.com/store/apps/details?id=com.genie9.gcloudbackup
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help