So i tired a couple JB roms and not my phone just boot loops. I can still get into recovery but no rom, tired and ICS one too, will boot. I have tried a couple HBOOTs, now on HBOOT-1.04.2000 ENG HBOOT . Says at the top Shooter XC ENG S-OFF RL....Really just trying to get back to stock.
EVO 3D CDMA on Sprint.
Any help would be greatly appreciated.
??
Anyone?
tru2life said:
So i tired a couple JB roms and not my phone just boot loops. I can still get into recovery but no rom, tired and ICS one too, will boot. I have tried a couple HBOOTs, now on HBOOT-1.04.2000 ENG HBOOT . Says at the top Shooter XC ENG S-OFF RL....Really just trying to get back to stock.
EVO 3D CDMA on Sprint.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
find your ruu and install it
http://forum.xda-developers.com/showthread.php?t=1208485
also try this link method maybe help you bro...
http://forum.xda-developers.com/showthread.php?t=1262457
otherwise bring and mobile software shop and they repair it for you just in 5 usd not more then that if you don't have warranty or taiwan version
best of luck...
Thanks..
Downloaded an RUU yesterday but my phone doesn't show up on my PC when I plug it in, then if I run RUU it does nothing. Probably cause it can't find the phone I am thinking.
tru2life said:
Thanks..
Downloaded an RUU yesterday but my phone doesn't show up on my PC when I plug it in, then if I run RUU it does nothing. Probably cause it can't find the phone I am thinking.
Click to expand...
Click to collapse
Download the zip from http://forum.xda-developers.com/showthread.php?t=1889438
It includes the ruu again and the drivers to install on your computer. Install drivers on pc. Boot phone into bootloader. Hook up to computer (should say Fastboot usb). Run command "fastboot oem lock" from the command line in the folder with the fastboot exe. Then run the ruu.exe. You'll be back to stock but still s-off so you can root again easily.
Thanks I will try that.
coal686 said:
Download the zip from http://forum.xda-developers.com/showthread.php?t=1889438
It includes the ruu again and the drivers to install on your computer. Install drivers on pc. Boot phone into bootloader. Hook up to computer (should say Fastboot usb). Run command "fastboot oem lock" from the command line in the folder with the fastboot exe. Then run the ruu.exe. You'll be back to stock but still s-off so you can root again easily.
Click to expand...
Click to collapse
Ok, now I can't get it to put into recovery....plugged into laptop there would be a red light and it will turn on to boot screen, where it stays. Unplugged it won't even do that. Going to plug into the wall, maybe battery is dead? Other ideas?
coal686 said:
Download the zip from http://forum.xda-developers.com/showthread.php?t=1889438
It includes the ruu again and the drivers to install on your computer. Install drivers on pc. Boot phone into bootloader. Hook up to computer (should say Fastboot usb). Run command "fastboot oem lock" from the command line in the folder with the fastboot exe. Then run the ruu.exe. You'll be back to stock but still s-off so you can root again easily.
Click to expand...
Click to collapse
tru2life said:
Ok, now I can't get it to put into recovery....plugged into laptop there would be a red light and it will turn on to boot screen, where it stays. Unplugged it won't even do that. Going to plug into the wall, maybe battery is dead? Other ideas?
Click to expand...
Click to collapse
Are you on the hookup to computer step? To boot into bootloader, remove battery, put back in, hold volume down then hold power. Hookup to computer and it should show fastboot usb in red.
tru2life said:
So i tired a couple JB roms and not my phone just boot loops. I can still get into recovery but no rom, tired and ICS one too, will boot. I have tried a couple HBOOTs, now on HBOOT-1.04.2000 ENG HBOOT . Says at the top Shooter XC ENG S-OFF RL....Really just trying to get back to stock.
EVO 3D CDMA on Sprint.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
You may need to upgrade your firmware. Try flashing the 2.89 update firmware minus hboot and see if that helps you boot up the ICS and JB roms. You must have hboot 1.5 or less to run them though.
You got a link for this?
raptoro07 said:
You may need to upgrade your firmware. Try flashing the 2.89 update firmware minus hboot and see if that helps you boot up the ICS and JB roms. You must have hboot 1.5 or less to run them though.
Click to expand...
Click to collapse
tru2life said:
You got a link for this?
Click to expand...
Click to collapse
If you follow the steps I gave you and run the ruu, it will update your firmware too.
Related
I have a secondary Evo 3D on my account that recently took a crap. My friend that was using it took the OTA update and it caused it to be updated to 2.17 but also HBOOT 1.5. So from there I unlocked it via HTC unlock method and installed SupraROM. I don't know the exact details but the phone became stuck in an infinite reboot mode. I tried to do a wipe and install the latest MeanROM but when it would boot the battery indicator would show a red triangle with an exclamation point and reboot within 10 seconds. I swapped batteries with a working 3D so I know it's not the battery. I tried downloading a stock 2.17 rom PG86IMG but it won't recognize or install in bootloader or TWRP (I've tried multiple zips). In bootloader it still shows S-ON and then ***UNLOCKED*** in pink up top.
What would be the best way to recover this phone back to 100% stock? Is it bricked or can it be fixed?
You will have to re lock the bootloader first. From fastboot, type "fastboot oem lock"
After the bootloader is re locked, it will allow the PG86IMG.zip to update the phone
Sent from my HTC Evo 3D using xda premium
Oh man I hope its that simple. Thanks!
EDIT: Nevermind, delete.
The phone is recovered and back to stock! Thanks!
Could you go into more detail please!
The Fer-Shiz-Nizzle said:
You will have to re lock the bootloader first. From fastboot, type "fastboot oem lock"
After the bootloader is re locked, it will allow the PG86IMG.zip to update the phone
Sent from my HTC Evo 3D using xda premium
Click to expand...
Click to collapse
GalaXy S ll [blazerV3] @ 1200x720
bman55 said:
Could you go into more detail please!
GalaXy S ll [blazerV3] @ 1200x720
Click to expand...
Click to collapse
I second this!
Can you go back to STOCK without having to plugin your phone to PC? because my device cannot be recognized!
If you're Hboot 1.50, you need the pc to recognize the phone to use fastboot.
You must use the fastboot command to enter custom recovery correctly to flash kernels/boot.img files that are part of ROMs.
(There is a way to use FlashImage app for the kernel beforehand if the phone will boot to the OS).
You must use the fastboot command to enter custom recovery correctly to format/restore a backup (or the kernel won't get loaded).
You must use the fastboot command to "relock" your phone.
You must "relock" your phone to run the stock RUU.exe's and stock RUU.zip's (PG86IMG.zip).
If you can't get the pc to recognize the phone, try a different PC and especially try SEVERAL usb cables as these tend to go bad.
Additional "Detail" info that may help is in the "guide" in my signature.
Wait where can i get the .zip?
TechnoHacker said:
Wait where can i get the .zip?
Click to expand...
Click to collapse
2.17? See my guide for the links.
Sent from my PG86100 using Tapatalk
Gave my Evo 3d to my borother a few months back, but hes come back to me today saying it was stuck in bootloop.
He booted into the bootloader and did a factory reset, but it was still stuck in bootloop.
I tried to get into recovery to flash a new rom, but when i select recovery from the bootloader, that also goes into a bootloop.
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Not sure if its important but the phone is s-off. Any ideas on whats going on or how to fix?
Apologies, supposed to put this in Q&A forum
While you're at bootloader, connect USB and then flash a stock RUU.
androidcdma said:
While you're at bootloader, connect USB and then flash a stock RUU.
Click to expand...
Click to collapse
Thanks for the reply. Will i lose s-off with this?
Tones1971 said:
Gave my Evo 3d to my borother a few months back, but hes come back to me today saying it was stuck in bootloop.
He booted into the bootloader and did a factory reset, but it was still stuck in bootloop.
I tried to get into recovery to flash a new rom, but when i select recovery from the bootloader, that also goes into a bootloop.
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Not sure if its important but the phone is s-off. Any ideas on whats going on or how to fix?
Apologies, supposed to put this in Q&A forum
Click to expand...
Click to collapse
You didn't say what version of the Evo 3D you have (CDMA or GSM) or what bootloader is installed, but if it's a Sprint CDMA model I would recommend flashing the Sprint ICS RUU.exe from Windows after putting the phone into fastboot mode in the bootloader. You may have to relock the bootloader with the "fastboot oem lock" command first if it shows "***UNLOCKED***" at the top of the screen.
That will fix a lot of problems, especially when the phone is in an indeterminate state. After flashing the RUU you can HTC unlock, flash a custom recovery and then root the stock ROM or flash a rooted ROM.
ramjet73
Sorry it is a UK GSM (Europe). I have revolutionary bootloader installed. Got an RUU to try now thanks.
androidcdma said:
While you're at bootloader, connect USB and then flash a stock RUU.
Click to expand...
Click to collapse
Tones1971 said:
Thanks for the reply. Will i lose s-off with this?
Click to expand...
Click to collapse
^^^^ He got it first with the short version.
No, you won't lose S-OFF and won't need to relock the bootloader first if that's your current status.
And if it's a GSM model everything still applies, you just need a different RUU, which you already have.
ramjet73
Thanks ramjet. Thought this was going to be straightforward but cant get ruu to install. Error 170. Ill keep plugging away / googling away, hopefully come up with something
Tones1971 said:
Thanks ramjet. Thought this was going to be straightforward but cant get ruu to install. Error 170. Ill keep plugging away / googling away, hopefully come up with something
Click to expand...
Click to collapse
Error 170 means that the RUU utility can't find the phone. There's a readme.doc for running the RUU here, and the error codes are towards the end of that.
Are you putting it into "fastboot" mode in the bootloader, which should change to "fastboot usb" when it is connected to a computer? You also need to have the HTC USB drivers active, which can be accomplished by installing HTC Sync.
ramjet73
Tones1971 said:
Used adb to push the recovery onto the phone again but still just keeps bootlooping.
Click to expand...
Click to collapse
adb push into a bootlooping phone?
do you have the drivers for the phone? (if not download and install HTC Sync as they come with it)
did you try flashing a custom recovery img through fastboot? (go to bootloader select fastboot, connect USB, type "fastboot flash recovery nameOfYourRecoveryImg.img")
Yeah have tried installing custom recovery through fast boot again, and im in fastboot ok when trying to run the RUU. Also have HTC Sync installed from when i had the phone.. Drivers seemed to be ok as i was able to install the custom recovery with adb, alhough i still got bootloop after that.
Ive a few other things to try when i get home from work. Im sure it shouldnt be too difficult to resolve. Hopefully anyway.
Well this isnt going smoothly at all. Used another PC and was able to get the RUU to run.
However it now comes up with Error 131 Customer ID problem. The RUU was for HTC Europe (non branded). The phone was sim free. When i posted months back my cid was HTC_001. I checked it here: http://forum.xda-developers.com/showpost.php?p=22394863&postcount=172
However now when i get my CID it is showing as CID0202. Any way i can get an RUU to install? Any idea how a CID could change?
EDIT: noticed i used a different command last time.
fastboot getvar cid shows CID0202
adb shell getprop ro.cid now shows device not found (previously showed CID_001)
Thats typing both commands in same window, one after the other. One gets CID0202, the other device not found???
There's a change cid command in fastboot, fastboot oem writecid or something along those lines... however i believe the cid check is in the updater scripts of the ruu in which case a fastboot flash of all the img files should avoid it entirely... i don't remember the procedure for extracting the img files from the ruu but i believe ur supposed to run it and then dig through your temp files...
dessolator666 said:
There's a change cid command in fastboot, fastboot oem writecid or something along those lines... however i believe the cid check is in the updater scripts of the ruu in which case a fastboot flash of all the img files should avoid it entirely... i don't remember the procedure for extracting the img files from the ruu but i believe ur supposed to run it and then dig through your temp files...
Click to expand...
Click to collapse
Thanks for this. Ill see if i can find anything else out about it. So saves running the RUU exe and no cid check done then?
Need to bump this as im not getting anywhere. No RUU's will install, error 31 customer error. Have flashed recovery via ADB and through PG86IMG.ZIP, but still cant get in to recovery as it just continually reboots.
S-OFF with revolutionary. Anybody any ideas please?
Got bigger problems than i thought. Finally got an RUU to install after 4 days of trying, by first using fastboot oem writecid 11111111. But when the phone rebooted it was back bootlooping again. Is there any hope for my phone?
Tones1971 said:
Got bigger problems than i thought. Finally got an RUU to install after 4 days of trying, by first using fastboot oem writecid 11111111. But when the phone rebooted it was back bootlooping again. Is there any hope for my phone?
Click to expand...
Click to collapse
You need to stop cross posting in the d3rp Q&A thread and your own thread if you want more help. Cross-posting is stongly discouraged on XDA and it's really confusing when you are asking for help in one thread while getting different advice in another.
It sounds to me like all the CID changes on your phone have left it in an indeterminate state and I'm not sure at this point what is the correct CID and RUU for your model. If you could detemine that, set the CID correctly and flash the right RUU the phone should work, but it might be too late if you have in fact been flashing firmware that doesn't match your phone because the right RUU may not back that out properly.
That's all I can offer at this point, but since I don't know the history of your phone and how it got the various CID's you have reported, you will probably be the one that needs to figure it out.
ramjet73
So... was running the MikVirgin ICS rom on my S-on 1.50 Evo 3d. Was going to bring it back to scratch and go through the S-Off process to run something better. I have Revolutionary 4.0.1.4 installed and fastboot on my computer. For the life of me, I cannot get the phone to accept anything now :\ Trying to run the RUU gives me the 170 error and any rom I try loops at the boot loader (not the white HTC screen, but the boot image for the rom).
Help would be appreciated
bl4ckllama said:
So... was running the MikVirgin ICS rom on my S-on 1.50 Evo 3d. Was going to bring it back to scratch and go through the S-Off process to run something better. I have Revolutionary 4.0.1.4 installed and fastboot on my computer. For the life of me, I cannot get the phone to accept anything now :\ Trying to run the RUU gives me the 170 error and any rom I try loops at the boot loader (not the white HTC screen, but the boot image for the rom).
Help would be appreciated
Click to expand...
Click to collapse
The 170 error is normally a USB connectivity issue caused by a bad USB cable or Windows driver problems. You also need to have your bootloader relocked if you are S-ON.
See this post for RUU.exe troubleshooting steps. If you planning to get S-OFF you might be interested in trying my guide.
ramjet73
ramjet73 said:
The 170 error is normally a USB connectivity issue caused by a bad USB cable or Windows driver problems. You also need to have your bootloader relocked if you are S-ON.
See this post for RUU.exe troubleshooting steps. If you planning to get S-OFF you might be interested in trying my guide.
ramjet73
Click to expand...
Click to collapse
Yeah, I've tried it in Relocked status, and still no go. Even under fastboot USB (and I made sure the drivers are there) it won't recognize the phone is attached. I've factory wiped and I'm going to try and re-install the Mikvirgin rom again.
bl4ckllama said:
Yeah, I've tried it in Relocked status, and still no go. Even under fastboot USB (and I made sure the drivers are there) it won't recognize the phone is attached. I've factory wiped and I'm going to try and re-install the Mikvirgin rom again.
Click to expand...
Click to collapse
Have you tried another cable and/or PC?
ramjet73
I had a similar (not identical) problem, and I solved it by pulling the zip out of the exe by letting it run without plugging the phone in and then looking through the folders in my temp folder until I found rom.zip. Renamed it PG86IMG, put it on my sd card, re locked with fastboot, and boom! Phone rescued.
Sent from my Nexus 7 using xda premium
Was finally able to get it loaded with an ICS rom after doing a factory reset, installing the rom, and then manually installing the boot file through fastboot. Maybe I'll try again tomorrow, doing the s-off procedure first Thanks for the input all!
I was given a phone to try to resurrect from the dead. It powers on directly to the bootloader screen and does no more. I really know nothing about this phone model. Before I start, I want to know if it is even possible. The screen says the following:
*** LOCKED ***
SHOOTER XC SHIP S-ON RL
HBOOT-1.57.0000
eMMC-boot
Apr 20 2012, 17:39:22
And then there are the normal bootloader options. Can this thing be saved?
silenthatred said:
I was given a phone to try to resurrect from the dead. It powers on directly to the bootloader screen and does no more. I really know nothing about this phone model. Before I start, I want to know if it is even possible. The screen says the following:
*** LOCKED ***
SHOOTER XC SHIP S-ON RL
HBOOT-1.57.0000
eMMC-boot
Apr 20 2012, 17:39:22
And then there are the normal bootloader options. Can this thing be saved?
Click to expand...
Click to collapse
if you can get to the bootloader screen and access the fastboot selection,plug it into a computer and get it to read fastbootusb then its fixable,first find your token and unlock the bootloader, then from there install a custom recovery , next copy the stock ROM over to your sdcard and boot into recovery... select install zip from sdcard and guide yourself to where the file is located ,select it and let it install... from there it should be able to reboot and boot up into the ROM
wloftus said:
if you can get to the bootloader screen and access the fastboot selection,plug it into a computer and get it to read fastbootusb then its fixable,first find your token and unlock the bootloader, then from there install a custom recovery , next copy the stock ROM over to your sdcard and boot into recovery... select install zip from sdcard and guide yourself to where the file is located ,select it and let it install... from there it should be able to reboot and boot up into the ROM
Click to expand...
Click to collapse
Thanks, it does show fastboot usb...find your token? Not sure what that means. I'll search around a bit when I get home. My original Evo 4G I did root, but don't remember that part.
silenthatred said:
Thanks, it does show fastboot usb...find your token? Not sure what that means. I'll search around a bit when I get home. My original Evo 4G I did root, but don't remember that part.
Click to expand...
Click to collapse
You don't need to unlock the bootloader to fix it, and you shouldn't unlock it anyways, until you have it fully booted properly.
Run the RUU EXE from a PC for the 3.28 update (or whatever the later version is) while the phone is connected via fastboot USB mode, it will re-flash the ROM and should boot properly then.
Unknownforce said:
You don't need to unlock the bootloader to fix it, and you shouldn't unlock it anyways, until you have it fully booted properly.
Run the RUU EXE from a PC for the 3.28 update (or whatever the later version is) while the phone is connected via fastboot USB mode, it will re-flash the ROM and should boot properly then.
Click to expand...
Click to collapse
RUU.EXE finds it and then gets to the restarting into bootloader step and the phone restarts. Then it just saying waiting for bootloader until it times out, but the bootloader is up on the phone.
silenthatred said:
RUU.EXE finds it and then gets to the restarting into bootloader step and the phone restarts. Then it just saying waiting for bootloader until it times out, but the bootloader is up on the phone.
Click to expand...
Click to collapse
This happens sometimes if you have a custom bootloader installed when you flash the RUU. Just cancel the Windows task and restart it and you should be fine.
ramjet73
wloftus said:
if you can get to the bootloader screen and access the fastboot selection,plug it into a computer and get it to read fastbootusb then its fixable,first find your token and unlock the bootloader, then from there install a custom recovery , next copy the stock ROM over to your sdcard and boot into recovery... select install zip from sdcard and guide yourself to where the file is located ,select it and let it install... from there it should be able to reboot and boot up into the ROM
Click to expand...
Click to collapse
Unknownforce said:
You don't need to unlock the bootloader to fix it, and you shouldn't unlock it anyways, until you have it fully booted properly.
Run the RUU EXE from a PC for the 3.28 update (or whatever the later version is) while the phone is connected via fastboot USB mode, it will re-flash the ROM and should boot properly then.
Click to expand...
Click to collapse
Couple things since I have looked into this a little more. Despite it saying Sprint on the front, it is a Virgin Mobile phone. It has the OTA that came down on it, so I can't flash the older RUU. It says it is an older version. So it looks like unlocking the bootloader is my only option? Question is, how do I do that from the bootloader? I was able to get the token and have the unlock_code.bin file, but the instructions to flash it seem to rely on having a working ROM to complete it, which I don't have. The phone is stuck in a bootloader loop. S-OFF, I have the answer. But it is S-ON, so not sure what to do.
silenthatred said:
Couple things since I have looked into this a little more. Despite it saying Sprint on the front, it is a Virgin Mobile phone. It has the OTA that came down on it, so I can't flash the older RUU. It says it is an older version. So it looks like unlocking the bootloader is my only option? Question is, how do I do that from the bootloader? I was able to get the token and have the unlock_code.bin file, but the instructions to flash it seem to rely on having a working ROM to complete it, which I don't have. The phone is stuck in a bootloader loop. S-OFF, I have the answer. But it is S-ON, so not sure what to do.
Click to expand...
Click to collapse
You are right that the Virgin Mobile RUU can't be flashed when S-ON and the OTA has been installed unless you can flash a zip to downgrade your main version (mainver) and you have to be unlocked and rooted to do that.
The unlock_code.bin file is flashed via fastboot USB mode so it might work, but if you've tried that and it doesn't you may be able to use unknownforce's hboot downgrade method to get straight to S-OFF. I don't know of anyone that's done it on an Evo V 4G but it might work if you use the RUU zip file for that model.
ramjet73
ramjet73 said:
You are right that the Virgin Mobile RUU can't be flashed when S-ON and the OTA has been installed unless you can flash a zip to downgrade your main version (mainver) and you have to be unlocked and rooted to do that.
The unlock_code.bin file is flashed via fastboot USB mode so it might work, but if you've tried that and it doesn't you may be able to use unknownforce's hboot downgrade method to get straight to S-OFF. I don't know of anyone that's done it on an Evo V 4G but it might work if you use the RUU zip file for that model.
ramjet73
Click to expand...
Click to collapse
It flashes unlock_code.bin to the phone successfully, but the next steps say to click yes on the screen to unlock on the phone. Can't access that without a working ROM. I'll try unknownforce's method when I get home, thanks for the help!
ramjet73 said:
You are right that the Virgin Mobile RUU can't be flashed when S-ON and the OTA has been installed unless you can flash a zip to downgrade your main version (mainver) and you have to be unlocked and rooted to do that.
Click to expand...
Click to collapse
Why is this? Is there not a full RUU for the latest version?
ramjet73 said:
The unlock_code.bin file is flashed via fastboot USB mode so it might work, but if you've tried that and it doesn't you may be able to use unknownforce's hboot downgrade method to get straight to S-OFF. I don't know of anyone that's done it on an Evo V 4G but it might work if you use the RUU zip file for that model.
ramjet73
Click to expand...
Click to collapse
You still have to brick the device for this and I haven't been able to brick it without using a full RUU flash, which he apparently can't do?
silenthatred said:
It flashes unlock_code.bin to the phone successfully, but the next steps say to click yes on the screen to unlock on the phone. Can't access that without a working ROM. I'll try unknownforce's method when I get home, thanks for the help!
Click to expand...
Click to collapse
Does it still say ** LOCKED ** Or does it say ** UNLOCKED ** now?
Unknownforce said:
Why is this? Is there not a full RUU for the latest version?
Click to expand...
Click to collapse
No. Virgin Mobile released an OTA update in November but there's no RUU that corresponds to it available yet. Fortunately, the bootloader version didn't change so the original RUU can be flashed with S-ON if the mainver is set low, but you need to be unlocked and rooted already to flash the zip file that does that.
You still have to brick the device for this and I haven't been able to brick it without using a full RUU flash, which he apparently can't do?
Click to expand...
Click to collapse
That would be a problem for him then. I don't know of anyway to flash the RUU with S-ON after the OTA has been installed if the bootloader is actually locked and he can't unlock it.
ramjet73
Yeah, not looking good. Thanks for the help though!
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help