Hello There,
Little problem here. When I try to update via PC Companion, it tells me that I already have the latest version, bit I don't think I do. Truth be told, I already messed up a lot with this phone in the past, but I calmed down, because it got so slow to the point of being unusable, Then I reset to factory, but there must be something wrong left. The info I have in the "About Phone" is:
Model Number: St 15 i
Android Version: 2.3.4
BaseBand Version:8x55A-AAABQOAZM-203028D-56
Kernel Version: 2.6.32.9-perf
Build Number: 4.0.2.A.0.42
Any hints, please ?
jk6090 said:
Hello There,
Little problem here. When I try to update via PC Companion, it tells me that I already have the latest version, bit I don't think I do. Truth be told, I already messed up a lot with this phone in the past, but I calmed down, because it got so slow to the point of being unusable, Then I reset to factory, but there must be something wrong left. The info I have in the "About Phone" is:
Model Number: St 15 i
Android Version: 2.3.4
BaseBand Version:8x55A-AAABQOAZM-203028D-56
Kernel Version: 2.6.32.9-perf
Build Number: 4.0.2.A.0.42
Any hints, please ?
Click to expand...
Click to collapse
The phone you have is not the x10mini (2010 device, E10i), but the 2011 Experia mini (without x10). It should be updatable to ICS as far as I'm aware, but that not only depends on your phone, but may also have to do with your carrier, and in how much they customised the firmware for your phone. Look for the Xperia Mini forum in the Sony Section of the main forum, they may be able to help you further.
Thank you
SmG67 said:
The phone you have is not the x10mini (2010 device, E10i), but the 2011 Experia mini (without x10). It should be updatable to ICS as far as I'm aware, but that not only depends on your phone, but may also have to do with your carrier, and in how much they customised the firmware for your phone. Look for the Xperia Mini forum in the Sony Section of the main forum, they may be able to help you further.
Click to expand...
Click to collapse
Tks
Related
EDIT!!::::
Ok so First of my x10 mini pro was default and its model was U20a, its Build was 2.0.A.0.504 and the baseband was 06...
I then tried bits and peices of things and finally managed to change the model to U20i and have the build change to 2.1.1.A.06 and have the same baseband by using a custom downloaded backup file through xrec...
i couldnt figure out how to get the baseband to XXXXXXX015 so i tested my luck on the flasher that was here: http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
So after a few tries it works
----
will report bugs and problems soon....
----------
Ok So.
Here is the story, i am trying to get my x10 Mini Pro to run this here:
http://forum.xda-developers.com/showthread.php?t=1051678
It is the ROM called: [ROM] Cyanogen Froyo - CM6 latest sources (Version 2.1) fast and stable + Dual Touch
Ok so i know i need to get my baseband to end with 015 so here is my information.
Model Number: U20a
Firmware Version: 2.1-update1
Baseband version: M76XX-TSNCJOLYM-53404006
Kernel Version: 2.6.29 [email protected] #1
Build Number: 2.0.A.0.504
So i tried using SEUS to get my version to be 2.1.1.A.06 so my baseband would be xxxxx015
BUT when i tried updating it said that there is no available updates and that my x10 mini pro is up to date...
Also i live in Queensland in Australia...
---
So how do i manage to get the ROM to run for me if i can not update/flash to that baseband/build... i have tried to follow this here: http://forum.xda-developers.com/showthread.php?t=1040149
But i can not get the flasher to be downloaded, it seems the link is broken of the download has been removed...
If anyone could give me something to work with here, even just ideas and or tips i would be happy, atm i am testing to restore using a 2.1.1.A.06 Build Version Backup... Its working so far, havent rebooted yet...
Ok i had that backup finish, and i am at 2.1.1.A.06 now but my baseband is still the same... *beep* (cursing under breath xD)
Cant find a damn sure fire way to flash the correct baseband... maybe i can find a way for a U20i model version since the previous backup which used the 2.1.1.A.06 build....
Going on a search to see if its easier to flash the 015 baseband
Ok cant seem to find anyway to get the correct baseband version flashed over my model is now U20i, the Build is 2.1.1.A.06 but the baseband is still Baseband version: M76XX-TSNCJOLYM-53404006
I guess that restoring from a restore save wont change the baseband version maybe... but im not sure... my default is stil u20a and is still 2.0.A.0.504
I hate not knowing what to do lolxD
So I have not had any luck in figuring out what to do about my baseband problem but i was playing around with the restore from the custom backup and i found 2.1.1.A.06 to be faster and more responsive than 2.0.A.0.504...
Just about to fix up a personal save of that custom so i have my default and the custom.
Now to wait for someone to help... All i need is to be able to get the Baseband version:M76XX-TSNCJOLYM-53404015 onto my x10 mini pro, instead of its M76XX-TSNCJOLYM-53404006...
So for you guys again, my baseband is M76XX-TSNCJOLYM-53404006 for my 2.0.A.0.504 backup and is also M76XX-TSNCJOLYM-53404006 for the new 2.1.1.A.06 custom backup. For the 2.0.A.0.504 which is my default build number for my default backup, the Model is U20a...
For my custom the Model is shown as U20i.
I have a U20i_2.1.1.A.06_Baseband etc etc file from someone on xda which is as a 7z file and i have no clue what to do now... help plz.......
X10 Mini Pro 2.1 incl. Flashtool
or
[FLASHTOOL GUIDE] HOW TO for n00bies
Ok so i now i have the rom running fine i think on my x10 which was default with the settings firstly stated, i then used a custom back up of 2.1.1.A.06 which gave my phone the U20i model and the needed 2.1.1.A.06 Build
i then found that the baseband could not be implimented properly through a backup and i therefore needed to flash it, my first many attempts failed greatly and i had no clue i then used this guide here and the latest version of the flasher http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
i did not think it would work and to my surprise it did
Ok So far i have found that since i am on 3G i have no way to actually utilize the PHONE aspect of it, and i have also had something go wrong with the draw dock type thing... it wont bring up all of the apps now...
so its not that big of a deal, so atm its good, i have the u20i and the correct build and baseband so yay
but anyway, i still have my default backed up, i have the previous version backed up and the CM6 ROM version so i think that this is all good
although i wish i could get a nice rom which is 3G compatible, and oh oh oh! my cousin can get 4G speeds and still cant get 3G xD
Ok so after some tinkering and some searching and ****, i have found that the baseband is now 015 for all my backups... i will have to find baseband and kernel to flash to my device that will return it to 06
If i had the time to learn how i would see about an all in 1 sort of program which holds all basebands and its coupled builds... it would also root and instal xrecovery etc as other options and that will be about all xD but meh xD
aulterra said:
EDIT!!::::
Ok so First of my x10 mini pro was default and its model was U20a, its Build was 2.0.A.0.504 and the baseband was 06...
I then tried bits and peices of things and finally managed to change the model to U20i and have the build change to 2.1.1.A.06 and have the same baseband by using a custom downloaded backup file through xrec...
i couldnt figure out how to get the baseband to XXXXXXX015 so i tested my luck on the flasher that was here: http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
So after a few tries it works
----
will report bugs and problems soon...
----------
Click to expand...
Click to collapse
How did you get to U20i? I actually have to do the opposite! Can you guide me through going from U20i to U20a??? I have read so much my brain is beginning to melt but I'm just not getting anywhere! :crying:
I need something in U20a to enable options in the baseband so it will work in Canada. I bought the stupid thing on eBay and didn't realize there were 2 versions of this phone.
Hi guys,
I have a Xperia Mini Pro with this configuration...
Model: U20i
Firmware: 2.1-update1
Baseband: M76XX-TSNCJOLYM-53404006
kernel: 2.6.29
I'm still a noob at installing new versions of Android.
Can anyone tell me how i update the Baseband to M76XX-TSNCJOLYM-53404015?
I already have it rooted, i just can't install modified androids because of this baseband!
Thanks! Any help is welcome!
You need to update the phone using the SEUS app. This will upgrade your baseband but will also wipe any existing mods & data.
Simply Run the SEUS program and follow the intructions given on screen. Once you've updated, your baseband will be updated.
--
Not sure why your baseband isn't already, having re-read the post you say it already has 2.1 update-1 which is wierd. Try updating the phone again anyway it might solve your problem
You can update with pc companion
Sent from my U20i using XDA App
Try updating via PC Companion or SEUS, like that:
http://www.youtube.com/watch?v=zS2LIuy6YfY
I have some probleam. My xperia x10 mini dont upgrade firmware, because it is modify by TIM. So, i have a old firmware and baseband. How i can upgrade firmware? I cant do it in SEUS because say that i have the last firmware, but dont. How can i do? Flash new firmware? If i flash i can return to the original if i have some probleam whit new firmware? Where i can found the last firmware for x10a? Tks anyway!
Yusuke17 said:
Hi guys,
I have a Xperia Mini Pro with this configuration...
Model: U20i
Firmware: 2.1-update1
Baseband: M76XX-TSNCJOLYM-53404006
kernel: 2.6.29
I'm still a noob at installing new versions of Android.
Can anyone tell me how i update the Baseband to M76XX-TSNCJOLYM-53404015?
I already have it rooted, i just can't install modified androids because of this baseband!
Thanks! Any help is welcome!
Click to expand...
Click to collapse
You need to change your build.prop file to fool SE that you have a different version so they'll send you the 015 version. To do this you must:
1. Root the phone.
2. Google and download a build.prop file for your phone (exact model).
3. Change your current /system/build.prop with that one using RootExplorer (or similar).
4. Reboot the phone.
5. Update the phone with PC Companion.
Hi Everyone,
I want to restore my phone back to Rogers default. When I bought it it had 1.6. They upgraded to 2.1 with no update to 2.3 in sight. That's when I flashed it. Now there are a lot of things that aren't working properly on it. But I'm over the curiosity and just want to restore it. Not to 1.6 but to Rogers 2.3.
I did several searches and the only relevant post was 1 1/2 years old and referenced things that no longer work.
I did to a factory reset from the phone then hooked it up to PC Companion, but it just says I have the most up to date software. But I know what a Rogers SE x10 ships with and I don't have any of it.
Here are the settings from "Settings > About Phone";
Model Number: X10i
Android Version 2.3.3
Baseband Number: 2.1.7.1
Kernel Version: 2.6.29-0054-g5f01537 [email protected] #1
Build number: 3.0.1.G.0.75
Thanx in advance.
Nick
Hello There,
I have a little problem here. When I try to update via PC Companion, it tells me that I already have the latest version, but I don't think I do. Truth be told, I already messed up a lot with this phone in the past, but I calmed down, because it got so slow to the point of being unusable, Then I reset to factory, but there must be something wrong left. The info I have in the "About Phone" is:
Model Number: St 15 i
Android Version: 2.3.4
BaseBand Version:8x55A-AAABQOAZM-203028D-56
Kernel Version: 2.6.32.9-perf
Build Number: 4.0.2.A.0.42
Any hints, please ?
Do a favor to yourself. Unlock your bootloader & install CM 10.1 rom by the master mikeioannina. HERE.
jk6090 said:
Hello There,
I have a little problem here. When I try to update via PC Companion, it tells me that I already have the latest version, but I don't think I do. Truth be told, I already messed up a lot with this phone in the past, but I calmed down, because it got so slow to the point of being unusable, Then I reset to factory, but there must be something wrong left. The info I have in the "About Phone" is:
Model Number: St 15 i
Android Version: 2.3.4
BaseBand Version:8x55A-AAABQOAZM-203028D-56
Kernel Version: 2.6.32.9-perf
Build Number: 4.0.2.A.0.42
Any hints, please ?
Click to expand...
Click to collapse
You can connect your device to the PC and through PC Companian make a repair and it will install the stock ROM for your device and everything will be alright.
It did not work
Thanks, but the repair procedure did not work as well, it says there is no software available for my phone, pretty much what the software update procedure did. I guess the problem is bigger, because as I mentioned before, I really messed up with the phone previously, I think there is some kind of version conflict in the device.
Cheers
Flash stock ftf file via flashtool or else tried SUS (sony update service)
P.S. post here http://forum.xda-developers.com/showthread.php?p=38458888 next time your questions to get best of help! Help keep xda clean for all members
Sent from my Xperia Arc S using Tapatalk 2
jk6090 said:
Hello There,
I have a little problem here. When I try to update via PC Companion, it tells me that I already have the latest version, but I don't think I do. Truth be told, I already messed up a lot with this phone in the past, but I calmed down, because it got so slow to the point of being unusable, Then I reset to factory, but there must be something wrong left. The info I have in the "About Phone" is:
Model Number: St 15 i
Android Version: 2.3.4
BaseBand Version:8x55A-AAABQOAZM-203028D-56
Kernel Version: 2.6.32.9-perf
Build Number: 4.0.2.A.0.42
Any hints, please ?
Click to expand...
Click to collapse
Maybe you unlocked your bootloader? That would make any Sony tool useless. I guess the best way to fix it - use flashtool, as mentioned by others
Hi all, I have a problem with my xperia x10 mini E10i. I had a problem of signal change rom. The phone does not recognize the simcard, and gets no signal.
I read on different forums that the solution is to downgrade the phone to 1.6 and then upgrade again to 2.1
So I did, I did downgrade to 1.6 and then I upgraded to 2.1 with sony pc companion.
But the problem is not solved. Still does not recognize the simcard.
I think everything is correct:
Model: E10i
Firmware version: 2.1-update1
Base band: M76XX-TSNCJOLYM-XXXXXXXX
Kernel version: 2.6.29 SEMCUser @ SEMCHost No. 1
compile version: 2.1.1.A.0.6
Anyone know what happens to my phone? I have done what is said in the forums, but still not working. Could be broken sim reader? Or is not normal that the reader is broken?
thank you very much
The problem is fixed!!