I was wondering if there's a way to read the data being sent from my phone.
There is app that I'm working with and I need to read what kind of requests it makes (eg. Either GET or POST and where)
I installed Charles and Fiddler but the app doesn't load fully. I also did a TCP dump, and nothing.
If this is not possible, is it possible to fully decrypt and apk?
I used apk to java but I get a bunch of errors when I load the output on eclipse. It looks like there are code missing.
Any help is appreciated.
Thanks.
PS: Yes, I did search before posting.
Related
Greetings. Been haunting this place for awhile, happy to finally have root.
After the phone is rooted the last step is something that sweeps up a bunch of SE's stock apps that most people don't want. What about us who actually liked a few of them, though?
I would have liked to keep the app called "TrackID," and am wondering if there's any way to get it back? I can't really find like a repository for the base APKs (I might want the Mixi plugin for Timescape back in the future, as well).
Can someone rip these out somehow for individual installing?
Here it is:
http://rapidshare.com/files/403753839/trackid.apk.html
Just install the apk.
Its works for me.
Nice threat, nice anwser.
It works fine with me too.
Thanks!
Preventing the rooting process from removing apps
Hello, You could just enter the step4 folder and open the cleanup.sh file in notepad or similar.
Remove the line saying rm *packagename here*. Then your app will only be copied to your SD, but it will also remain on the phone.
track id request
i couldnt download the package, the link no longer works :-(
Could someone uóad it again to another server? Because its a common problem and will br of much help thanks
http://balsat.hopto.org/builds/seX10-system/index.php?dir=..%2FseX10-system%2Fdir%2Fsystem%2Fapp%2F
ok... but now...
I have the app already installed, but now evertime it tries to connect it says "authentication error".... help?
I gave up and rooted the phone again, i went from steps 1 to 3 with no problems, using track id everytime to make sure it worked, and it did, I even used the cleanup script and it was there working very well...
So, I used steps 4 and 5 (for the X10a) But now it wont work... it says "authentication error".... what gives?
Sorry for my english, I´m from mexico...
Everything on my phone is working fine...
For TrackID I can only say that it was probably a rights issue.
Use chmod or Root Explorer to set the rights(644).
For step 4 and 5 i cant help,i have only a 3 step X10i ,sorry.
But dont give up, i think u find the help here on XDA.
Hi All,
I’ve just got myself a “bargain” from eBay that was advertised as unlocked but alas turned up with the sim lock on
I’ve contacted the Tmobile network in the UK and they will only send a code to a uk address and I am not there.
I have looked on this and other forums and seen that I could do it myself. I have rooted the phone and now have the yellow warning triangle on boot up. I also have CWM and Superuser icons in the Applications.
I have then tried to go onto the android app store to download Chainfires Galaxy S2 SIM Unlock. I then get the "There are no Android phones associated with this account" problem. Again I have looked at the solution to remove the phone number and re-enter it but this has not worked. I have tried several times.
I do not have Wifi and obviously can’t access the internet on the phone.
Is someone able to kindly send me the file in an email?
Once I have this done what else do I need to do to the phone? I’ve rooted it but only to the closest number I could find.
Thanks to XDA and all of you for reading this!
I'm a little slow so plese can you dumb it down... alot! ha ha
Phone: GT-I9100
Android version - 2.3.5
Baseband version - I9100BOKJ1
Kernel version - 2.6.35.7-I9100XWKE2-CL187606 [email protected] #2
Build number - GINGERBREAD.BOKK1
apk
That app only works on early version phones and may not work for you. If it doesn't you should try Helroz's Galaxy S Unlock app it works on all S II's but I believe it requires Internet to get a small payload. Which could be a problem for you unless you drive around for the first open WiFi.
It also doesn't give a code it just straight unlocks the phone.
Thanks. I have downloaded this to my computer. What do I now do with it?
I'm still lost... What do I do?
Please can anyone point me in the right direction!
Thanks
Place the app on your internal or external sdcard and install. Ensure you have enabled 'unknown sources' or something like it in the phone settings first. Allow it root access when prompted by the super user app.
Sent from my GT-I9100 using xda premium
Thanks for the quick reply,
The phone is brand new to me and I don't understand your instruction. I have downloaded the file and extraced the folders and files. I have then placed this onto the card. I then go into the phone and have ticked the unknown sources box. I then try to run any of the files and only get a "No applications can perform this action" error.
If I try to run AndroidManifest.xml it opens HTML viewer.
Anyone Please....
It's an apk, you weren't supposed to extract it. Apk files are android installation packages. Push the apk to your phone's sd card, and open it using the "my files" app to install.
Thanks again. I've done that. I can find the file eu.chainfire.sgs2simunlockcode.zip in My files. When I tap on it I get the message "Open file. No applications can perform this action"
What am I doin wrong? Thanks for your patience
smellyskater said:
Thanks again. I've done that. I can find the file eu.chainfire.sgs2simunlockcode.zip in My files. When I tap on it I get the message "Open file. No applications can perform this action"
What am I doin wrong? Thanks for your patience
Click to expand...
Click to collapse
You apparently somehow changed the file extension from .apk to .zip. Change it back.
I had to change the file extension from .zip!
I am not running the app and hopefully that will work. Wish me luck!
What else should I do to a new phone? Is there any way to get rid of the Tmobile startup screens?
Thanks for all your help, you have helped me stop pulling all my hair out and shouting at the dog!
The app did not find an unlock code
Anymore ideas anyone?
smellyskater said:
I had to change the file extension from .zip!
I am not running the app and hopefully that will work. Wish me luck!
What else should I do to a new phone? Is there any way to get rid of the Tmobile startup screens?
Thanks for all your help, you have helped me stop pulling all my hair out and shouting at the dog!
Click to expand...
Click to collapse
You can flash a stock unbranded firmware... But it sounds as if you should read a lot more educational material before attempting this. Lots of good information is in the roll up sticky in the i9100 general section. Start there, and start reading. I can't offer you any shortcuts. Shortcuts tend to lead to frustration and bricked phones.
I have looked into other ways to unlock this phone...
How do I extract my nv_data.bin - I cannot find this file
-or-
Could someone please upload helroz sim unlock for me?
Thanks... back to banging my head on the wall! lol
I am still not getting anywhere! Please can someone help
I'm stuck now...
Thank you all
Aren't there services on the web that cost abot $40 and send you an unlock code? I understand that you don't have wifi, and the phone doesn't work. But if that's the case, how r u posting here?
Edit:thid is the first result on the duck duck go search engine: http://www.unlockingcodesforphones.com/ FWIW
Sent from my GT-I9100 using xda premium
I have a computer with a sim card in it. I know that there are services to unlock but I am trying to avoid that cost if I can. Perhaps after I have tried all other options I will have to go that route.
Thanks
smellyskater said:
Could someone please upload helroz sim unlock for me?
Click to expand...
Click to collapse
Here you have Herloz Sim Unlock
;-)
http://db.tt/IVLIgefw
Gesendet von meinem GT-I9100 mit Tapatalk
I am a programming noob and I need some help. I just need someone to translate an error message for me. I have already made two complete themes successfully with this tool.
http://gosms.goforandroid.com/?p=235
When it is compiling the APK though, I get an "error" that says "THIS TOOL IS DEPRECIATED" (see attached screenshot). Yes, it is in all caps, which makes me think this is important. Sometimes if I see this the tool does not apply my changes...I get an APK, but it is the same APK I had before with no changes made.
I am a designer, not a programmer. I know enough to slop my way through the process using tools like this, but I don't know what messages like this mean or even if they matter at all. I have been able to compile usable APK despite this warning, but I'd still like to know what is triggering it and whether or not I should care about it.
I get this even with a "fresh" copy of the ZIP for the tool and deleting the old one.
I have tried googling this phrase with GOSMS and the threads are mostly translations from asian developers and I can't really understand them.
Any ideas?
Hi Guys
I wish to learn WEP cracking on android using the following: http://bcmon.blogspot.ca/
I have a SGHT989 running CM 10.1. Please could someone provide a simple tutorial. The monitor mode is working well for me... I can use all functions including running aerodump, wash, besside-ng and bcmon terminal. While running besside -ng, it even said to use aircrack to open a .cap file to see WEP key. I was not able to find this .cap file.
I would really appreciate some guidance.
Regards
Bump.. please help. If I can get this working, I will post a youtube video as to help others who may also be struggling.
ritz23 said:
Bump.. please help. If I can get this working, I will post a youtube video as to help others who may also be struggling.
Click to expand...
Click to collapse
bump
bump
location of *.cap file
I also just recently got bcmon running on my device (hisense sero 7 pro). After much searching through the sdcard and internal memory, I have all but concluded that besside-ng simply is not saving a .cap file.
Even though after running it on my old router it claimed it had a handshake and saved the information for the WPA key in WPA.cap.
I'm sure its something simple I'm just overlooking. Does anyone know where the cap file is stored? Or how to get besside-ng to save the cap file? I'd appreciate the help!
For future reference though, I'd like to add that I have not been able to get reaver for android GUI to work. It appears to activate monitor mode but keeps getting stuck when it waits for a beacon from the target device.
un4bomber said:
I also just recently got bcmon running on my device (hisense sero 7 pro). After much searching through the sdcard and internal memory, I have all but concluded that besside-ng simply is not saving a .cap file.
Even though after running it on my old router it claimed it had a handshake and saved the information for the WPA key in WPA.cap.
I'm sure its something simple I'm just overlooking. Does anyone know where the cap file is stored? Or how to get besside-ng to save the cap file? I'd appreciate the help!
For future reference though, I'd like to add that I have not been able to get reaver for android GUI to work. It appears to activate monitor mode but keeps getting stuck when it waits for a beacon from the target device.
Click to expand...
Click to collapse
Useing bcmon cap will stored andriod/data/data/.com.bcmon like folder then files/result/
Use root browser to located
Sent from my Xperia S using Tapatalk
how to hack wifi with bcmon terminal ???????????? please give me the steps
teibor s marbaniang said:
how to hack wifi with bcmon terminal ???????????? please give me the steps
Click to expand...
Click to collapse
First you check that your android support to monitor mode. Because bcmon only supports monitor mode supported android.
Hey guys.
Samsung Galaxy S4 (SG24) I537 here. I recently followed, with success, instructions for using SQLite to edit the database and remove the built-in AT&T browser bookmarks. Then something happened, probably a reboot, and Lo! and Behold! all those bookmarks reappeared and my one custom bookmark (and homepage) were removed.
So...assuming there is no better way can someone point me to a resource for creating some sort of autoexec script file that will run at boot time to put things the way I want them.
Not a programmer here, just someone able to follow instructions and not unwilling to use F1 when all else fails....