I am using XPERIA Mini Pro sk17i.While installing Avatar Rom,I get an error saying 'error 7' installation aborted saying installation error something from sd card.What should i do?Please suggest.Please help asap.
i get this message:
E:Error in /sdcard/cm-1.1b_34_20130201_mango.zip(Status 7)
Installation aborted
Siddhesh Sapre said:
I am using XPERIA Mini Pro sk17i.While installing Avatar Rom,I get an error saying 'error 7' installation aborted saying installation error something from sd card.What should i do?Please suggest.Please help asap.
i get this message:
E:Error in /sdcard/cm-1.1b_34_20130201_mango.zip(Status 7)
Installation aborted
Click to expand...
Click to collapse
you need to flash a kernel for that rom
or find a rom for locked bootloader
LJegenda said:
you need to flash a kernel for that rom
or find a rom for locked bootloader
Click to expand...
Click to collapse
My friend,I would like to know the proper steps for this installation.
As mentioned on the Avatar Rom forum page,I installed it right in the same way.I would like to know whether this rom requires any prerequisites like:some roms can be installed only if we are on STOCK Gingerbread(rooted and locked/unlocked) or on STOCK ICS(rooted and locked/unlocked) .Or do i need to install some other version of Cyanogenmod and then boot into recovery(cwm) and install?
You mentioned about flashing kernel for the rom.I flashed the boot.img which is included in the zip.But i got the Freexperia boot animation,and not the avatar bootanimation.Please help in all the above issues i mentioned.And yes,before i forget i would like to tell you that i flashed this boot.img and i got thekernel installed successfully(I think so,because through this bootanimation,i was able to go to cwm).But i got the same errors when i tried to installed this rom.I know that you are more experianced memers,so what you are saying maybe true.But on AVATAR ROM Page,they did not tell to flash kernel.Please help.
Siddhesh Sapre said:
My friend,I would like to know the proper steps for this installation.
As mentioned on the Avatar Rom forum page,I installed it right in the same way.I would like to know whether this rom requires any prerequisites like:some roms can be installed only if we are on STOCK Gingerbread(rooted and locked/unlocked) or on STOCK ICS(rooted and locked/unlocked) .Or do i need to install some other version of Cyanogenmod and then boot into recovery(cwm) and install?
You mentioned about flashing kernel for the rom.I flashed the boot.img which is included in the zip.But i got the Freexperia boot animation,and not the avatar bootanimation.Please help in all the above issues i mentioned.And yes,before i forget i would like to tell you that i flashed this boot.img and i got thekernel installed successfully(I think so,because through this bootanimation,i was able to go to cwm).But i got the same errors when i tried to installed this rom.I know that you are more experianced memers,so what you are saying maybe true.But on AVATAR ROM Page,they did not tell to flash kernel.Please help.
Click to expand...
Click to collapse
hi! so when you install kernel (fxp,nAa,Mesa) it will show their boot animation and that is ok so you can use any of those and more, when you boot into recovery (this will delete all your stuff on internal memory)
-wipe data/factory reset, wipe cache, then go to mounts and storage and wipe system, and then advanced and wipe dalvik cache.
-install your rom (if you dont have it on sd card go to mounts and storage and mount and mount usb storage)
-after you installed reboot system
and that should be it, but i went to avatar forum and it is only for mini? can you link it? And did you unlock bootloader?
i hope i helped you
LJegenda said:
hi! so when you install kernel (fxp,nAa,Mesa) it will show their boot animation and that is ok so you can use any of those and more, when you boot into recovery (this will delete all your stuff on internal memory)
-wipe data/factory reset, wipe cache, then go to mounts and storage and wipe system, and then advanced and wipe dalvik cache.
-install your rom (if you dont have it on sd card go to mounts and storage and mount and mount usb storage)
-after you installed reboot system
and that should be it, but i went to avatar forum and it is only for mini? can you link it? And did you unlock bootloader?
i hope i helped you
Click to expand...
Click to collapse
Yes my friend.I have unlocked bootloader and the stuff you have told me is correct,but i alreadyknow that.now the problem is,the bazooka launcher and system ui crashes immediately after rom is installed.Please help.And yes.Avatar rom isalso for xperia mini pro.I searched for it on google and cameto the xda page:http://forum.xda-developers.com/showthread.php?t=2137379
So now,can i replace the bazooka launcher from the zip by recent one on google play and also system ui from avatar rom for xperia mini st15i?peasehelp.why does that crash happen?its like i have got full rom,but can't access it.please help.
Siddhesh Sapre said:
Yes my friend.I have unlocked bootloader and the stuff you have told me is correct,but i alreadyknow that.now the problem is,the bazooka launcher and system ui crashes immediately after rom is installed.Please help.And yes.Avatar rom isalso for xperia mini pro.I searched for it on google and cameto the xda page:http://forum.xda-developers.com/showthread.php?t=2137379
So now,can i replace the bazooka launcher from the zip by recent one on google play and also system ui from avatar rom for xperia mini st15i?peasehelp.why does that crash happen?its like i have got full rom,but can't access it.please help.
Click to expand...
Click to collapse
wipe dalvik cache
if that doesent work, wipe data
if that doesent work re-flash after full wipe (data/factory reset, cache...)
if that doesent work find a new rom (i could recomend some of them...)
suggest me roms
LJegenda said:
wipe dalvik cache
if that doesent work, wipe data
if that doesent work re-flash after full wipe (data/factory reset, cache...)
if that doesent work find a new rom (i could recomend some of them...)
Click to expand...
Click to collapse
please suggest me some good roms which are excellent at battery prformance(gb/ics/jellybean):silly:
Siddhesh Sapre said:
please suggest me some good roms which are excellent at battery prformance(gb/ics/jellybean):silly:
Click to expand...
Click to collapse
ok my recomendation
GB- rage kernel - xgamer rom + andreno boost (mod) + setcpu make a profile for when the screen is off, set frequency to lowest on both (max freq and min freq.) for longest battery life (2.3.7)
ICS- panic kernel - ultimate hd rom (4.0.4)
JB - mesa kernel - havendroid rom dark demon edition rom (i'm using it for 3 weeks now) + Snapdragon™ BatteryGuru (4.2.2)
Related
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
dualsh0ck said:
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
Click to expand...
Click to collapse
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
iamdchosen1 said:
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
Click to expand...
Click to collapse
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
megatpanji said:
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
Click to expand...
Click to collapse
thx but problem above already appeared when i tried to flash pureness build 3 ROM on night-elf kernel..
dualsh0ck said:
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
Click to expand...
Click to collapse
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
iamdchosen1 said:
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
Click to expand...
Click to collapse
according to my first post. here
dualsh0ck said:
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
Click to expand...
Click to collapse
i've already done all wiping in CWM. but still stuck at sony logo.maybe i'll try some other kernel for jjhybrid3.1
Did you tried what I said?
Sent from my MT11i using xda premium
iamdchosen1 said:
Did you tried what I said?
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
i have suave kernel now.. and i want to change to alliance kernel..
dualsh0ck said:
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
Click to expand...
Click to collapse
Yes.
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
dualsh0ck said:
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
Click to expand...
Click to collapse
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
iamdchosen1 said:
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
Click to expand...
Click to collapse
before this with alliance1.1 and suave6 kernel work with no probs.
must i tell this in every reply?
this is the exact step doing all of this..
flash kernel via fastboot thru command prompt window..
and flash rom thru cwm with this step..
- reboot into recovery [power button then repeatedly press volume up]
- [wipe data/factory reset,cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
and chill bro. i have problem here, and i ask about it because i dont know what to do.
and fastboot folder must placed in android-sdk folders or it is not necessary?
bump
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Only boot.img has to be placed in android sdk folder.
Sent from my MT11i using xda app-developers app
Sorry I'm not awake today. Boot.img must be in android sdk and only the fastboot.exe file. I doubt it's got anything to do with that though, if you can successfully flash kernels.
Sent from my MT11i using xda app-developers app
Vampirmaniac said:
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
yup i'm sure.. because i want to flash night-elf kernel + jjhybrid3.1 rom..
as for now i use stock rom because can't successfully flash any custom rom..
my baseband 8x55A-AAABQOAZM-203028G-72.. it is also related?
HEY EVEN I HAD THE SAME SAME PROBLEM BEFORE...its was that i followed all the steps n still was stuck at bootlogo
even if i tried to go to recovery n flash the rom again , it simply said CANNOT MOUNT SD CARD.
So I tried to format my sd card using SDFORMATTER 3.1 and flashed the om again and :laugh: it WORKED
SO BASICALLY TRY TO FORMAT THE SD CARD USING SD FORMATTER software and not the windows default one.
IT WORKED FOR ME AND HOPE IT WILL FOR YOU ALSO
SD CARD FORMATTER 3.1 link google it
hey guys... really need help here...
i just successful UNLOCKED Bootloader,CWM and install custom kernel..
After fastboot the custom kernel (suave) then enter the CWM to flash custom ROM(Xperia_Ice_Cream_Pureness_build_6.00_NeoV)... wipe all data and other common step.. then i reboot the system
My phone get boot loop after that. So i remove the battery then enter the CWM again.. but the colour change to red and detect my phone as "xperia ARC".. plzzz.. i really stuck here
hi
How are u experts
i have LWW stock rom < stock kernel flash .58 rooted with cwm , and lockedbootloader>
i want to install ics 5.2 rom on it , how pls?
i don't want to unlockbootloader if its done without it , or you are experts
because am trying to install it from cwm done but when reboot Stops at logo sony..... .
after that i flash it with stock .58 and root it and cwm done.
pls help me and thanx for all
Dragon_syr said:
hi
How are u experts
i have LWW stock rom < stock kernel flash .58 rooted with cwm , and lockedbootloader>
i want to install ics 5.2 rom on it , how pls?
i don't want to unlockbootloader if its done without it , or you are experts
because am trying to install it from cwm done but when reboot Stops at logo sony..... .
after that i flash it with stock .58 and root it and cwm done.
pls help me and thanx for all
Click to expand...
Click to collapse
You mean real ics? Okay please update to ics like explained here first. After that get cwm.
Download the rom and put it on sd card.
1. Reboot in cwm
2. "install zip from sd card" > "choose zip"> choose the installation zip
3. wipe data/factory reset
4. Wipe cache partition
5. advanced > wipe dalvik cache
6. Reboot
That's it. Should work
No, you can't install cusrom ics with gb kernel, you should upgrade stock rom ics, root, install cwm, wipe everything, install cusrom real ics, done..
Sent from my Xperia Mini Pro using XDA
Smartid said:
No, you can't install cusrom ics with gb kernel, you should upgrade stock rom ics, root, install cwm, wipe everything, install cusrom real ics, done..
Sent from my Xperia Mini Pro using XDA
Click to expand...
Click to collapse
Don't wipe everything cause system should be untouched
Just do it like I said, should work...
ok thank u all i will try it tonight
thanxxxxx
mihahn said:
Don't wipe everything cause system should be untouched
Just do it like I said, should work...
Click to expand...
Click to collapse
why I should not be wipe all?
sorry I dont understood what do you mean >>> cause system should be untouched
Smartid said:
why I should not be wipe all?
sorry I dont understood what do you mean >>> cause system should be untouched
Click to expand...
Click to collapse
I just meant as you said wipe all that's wrong. Don't wipe or format /system. He just shouldn't do anything like format system. Just that he doesn't think "wipe all" = "system,data,cache,dalvik cache, etc"
Hello People.. i Joined XDa like 1 or 2 months ago.. i installed some roms and discovered why i get some random bootloops when installing a rom.. (if you done all ok and you get a bootloop follow this steps)
-Wipe Data --> Yes
-Wipe cache --> Yes
*Mounts and Storage* Format System --> Yes
*Advanced* Wipe Dalvik Cache --> Yes
Now Flash the ROM.. if The ROM have a CWM SuperSu Fix in Addons Flash it Without Rebooting! then Reboot.. after you boot to Home... complete Wizard and reboot again (not to CWM)
Now Install CWM (if u have locked bl now u dont have anymore CWM recovery.. so install it using the app called x-parts)
Boot to CWM and install add ons 1 by 1.. (for example.. Lockscreen, then reboot.. then flashlight, reboot.. camera fix, reboot.. etc..)
This way is needed in roms Like HyperBeamNewEra or HyperBeamNewTime (because khemaras told to flash lockscreen after rom and that cause many bootloops! if u check out last comments of NewTime all of them say Bootloops at LWW.. and i tried this way and i got no bootloop at locked bl.)
Hope you enjoyed the Post!
Pd.
1-This is mi first post
2- sorry for the bad english.. i dont speak it well.. if you didnt understand it well pm me and i will try to explain it better.
I was having problem installing some roms but as i was not formatting the system....thanks for this thread...now they work like charm....pressed thanks
I wouldn't recommend to format system before installing a rom:
1. Formatting system should be defined in the updater-script, so there's no need to do it manually
2. Formatting system can cause a status 7 (?) error, because of a getprop line. It tries to get the device's information, but because of formatting system it can't read the information and you get an error.
I would just format system, if it's necessary according to the thread of the rom :good:
Hey guys,
I really need help about flashig a custom rom for my xperia mini. Because whenever i flash this custom rom(Zelly Cream) it successfully installed and i followed everything in the procedures given by the dev (wipe cahe/data/ format system etc) but the problem is when i reboot the system it wont go through the sony logo and i cant even access to the recovery. The only thing that i did is flashing again the stock firmware to fix the problem. But i want to use a custom rom. Need help guys! my mini is rooted, installed cwm 5.0, locked bootloader, stock kernel, build no. 587.
I would really appreciate if someone can help me.
Thanks in advance
Dont worry Bro!! i ve got The solution!!
The reason this happened is because u forgot to format system from mount and storage!! No big deal!!
Now since u have a locked bootloader in order to unbrick ur phone u have to download sony update Service from sony site...
n follow the Procedure On screen!!
n ull get stock official ICS!! n unbrick ur Phone!!
Dont Worry!
U have root ur Fone again!! :fingers-crossed:
Cheers!:good:
Do hit Thanks !! :cyclops:
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
Zedfailon said:
Hey guys,
I really need help about flashig a custom rom for my xperia mini. Because whenever i flash this custom rom(Zelly Cream) it successfully installed and i followed everything in the procedures given by the dev (wipe cahe/data/ format system etc) but the problem is when i reboot the system it wont go through the sony logo and i cant even access to the recovery. The only thing that i did is flashing again the stock firmware to fix the problem. But i want to use a custom rom. Need help guys! my mini is rooted, installed cwm 5.0, locked bootloader, stock kernel, build no. 587.
I would really appreciate if someone can help me.
Thanks in advance
Click to expand...
Click to collapse
did u wipe Dalvik Cache!???
Are you sure you followed all the steps properly and you chose Xperia mini? Try it again
0. Locked Boot Loaders should Install CWM
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
9. Follow the steps in aroma installer to install the rom.
10. Untick Reboot Device when installation completed.
11. Go back to CWM & Reboot from there.
12. When System boots up go to Developer Option & Tick "Force GPU Rendering".
13. Active Users Flash Home_Key fix from Addon Section
Note: After installation, first boot may take several minutes (to create cache, dalvik cache etc.) to start your device. Leave your device for 20-30 minutes to settle down the rom. Also at first boot you may notice a high ram usages (less free ram). It is natural because android system occupy a lot of memory while settling down the new rom. After 30-40 minutes reboot your device and you are now ready to fly with your newly installed rom.
Click to expand...
Click to collapse
Sent from my SK17i running stock ics (.587)
yes
superRiyaz said:
The reason this happened is because u forgot to format system from mount and storage!! No big deal!!
Now since u have a locked bootloader in order to unbrick ur phone u have to download sony update Service from sony site...
n follow the Procedure On screen!!
n ull get stock official ICS!! n unbrick ur Phone!!
Dont Worry!
U have root ur Fone again!! :fingers-crossed:
Cheers!:good:
Do hit Thanks !! :cyclops:
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
did u wipe Dalvik Cache!???
Click to expand...
Click to collapse
Yes i've followed every instruction. (wipe dalvik cache, cache, format system, format data) but still i cant go through the sony logo. Now my current rom is the stock rom ics build no. 587. Rooted and installed cwm
Btw, thanks for the reply
mihahn said:
Are you sure you followed all the steps properly and you chose Xperia mini? Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Yes bro. I did it twice already and the same thing happened. I chose xperia mini and followed all other stuff in the aroma installer, untick the reboot device, etc. But still no luck of going through the sony logo. i've left my phone for over 1hour and its still in the sony logo.
Have you selected locked bootloader option in Aroma installer? I tried Zelly cream with Lupus kernel - it worked fine
z1WV said:
Have you selected locked bootloader option in Aroma installer? I tried Zelly cream with Lupus kernel - it worked fine
Click to expand...
Click to collapse
Yes i've selected it. And it still doesn't work. Any help? I really want to use that rom so bad.
Did you flash the kernel Included (or recomended) for your rom? because if you are stuck at a sony logo it seems to me that you still have stock kernel.
Edit: it seems that you have just hot boot the first kernel with recovery so when you boot again it just revert to stock Kernel.
That would explain why you can't access to recovery the second time.
You need to really flash the kernel:
1. Turn your phone off
2. Plus the usb Cable in While pressing volume up.
3. "fastboot flash boot boot.img" If you use fastboot in command line or "Select Kernel to Flash" button if you use fastboot in Flashtool.
Edit2: Ok I just realised that you have Locked bootloader so what i just told you won't work. Sorry.
Did you really follow step 10 and 11 and chose "reboot to system"?
The only thing I can think of would be to unlock your bootloader using mihahn thread http://forum.xda-developers.com/showthread.php?t=1879750 and then install a custom kernel.
tym0 said:
Did you flash the kernel Included (or recomended) for your rom? because if you are stuck at a sony logo it seems to me that you still have stock kernel.
Edit: it seems that you have just hot boot the first kernel with recovery so when you boot again it just revert to stock Kernel.
That would explain why you can't access to recovery the second time.
You need to really flash the kernel:
1. Turn your phone off
2. Plus the usb Cable in While pressing volume up.
3. "fastboot flash boot boot.img" If you use fastboot in command line or "Select Kernel to Flash" button if you use fastboot in Flashtool.
Edit2: Ok I just realised that you have Locked bootloader so what i just told you won't work. Sorry.
Did you really follow step 10 and 11 and chose "reboot to system"?
The only thing I can think of would be to unlock your bootloader using mihahn thread http://forum.xda-developers.com/showthread.php?t=1879750 and then install a custom kernel.
Click to expand...
Click to collapse
Thanks for the reply bro, yeah but it is said in the rom that it works with stock kernel. I dont want to unlock my bootloader maybe i'll brick my phone and i don't know how to fix that. I'm pretty sure that i've followed every steps given by the dev but still the same thing happened. Now, i tried to flash the stock kernel and root again and install cwm again then i tried to flash the custom rom via cwm and followed every steps then reboot. And still it wont go through the sony logo. really need help guys!
Zedfailon said:
Thanks for the reply bro, yeah but it is said in the rom that it works with stock kernel. I dont want to unlock my bootloader maybe i'll brick my phone and i don't know how to fix that. I'm pretty sure that i've followed every steps given by the dev but still the same thing happened. Now, i tried to flash the stock kernel and root again and install cwm again then i tried to flash the custom rom via cwm and followed every steps then reboot. And still it wont go through the sony logo. really need help guys!
Click to expand...
Click to collapse
When you have 10 posts you may ask in the dev thread, maybe there's a little step we all missed and so it's not working
Sent from my SK17i running stock ics (.587)
mihahn said:
When you have 10 posts you may ask in the dev thread, maybe there's a little step we all missed and so it's not working
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
yeah i've never seen a feedback from people that's using the zelly cream rom with a stock kernel, maybe the problem is with the stock kernel. Now i'll try some other custom roms out there maybe they'll work with the stock kernel and a locked bootloader.
Thanks for the support guys!
BTW superRiyaz, mihahn,z1WV,tym0
Hey guys! i've made the rom working for my xperia mini! all i did is install again and follow again the instructions! i don't why the third time i tried to install this rom is working! I did all the same steps again and im shocked that it go through the sony logo!
anyways thanks for cooperating guys! you got my thanks! i'm done with my problem!
Edit: Sorry didn't see the above post. Happy you solved your problem.
tym0 said:
Edit: Sorry didn't see the above post. Happy you solved your problem.
Click to expand...
Click to collapse
yeah thanks anyway
mihahn said:
Are you sure you followed all the steps properly and you chose Xperia mini? Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Hi, the first time i tried this i only wiped data/factory reset and nothing else, so when i rebooted from recovery mode i got stuck at sony logo. Took me some time to fix everything (flash stock ICS on device, root phone and install cwm again).
Now i did all this:
0. Locked Boot Loaders should Install CWM
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
9. Follow the steps in aroma installer to install the rom.
10. Untick Reboot Device when installation completed.
11. Go back to CWM & Reboot from there.
12. When System boots up go to Developer Option & Tick "Force GPU Rendering".
13. Active Users Flash Home_Key fix from Addon Section
Now when i rebooted from CWM (recovery mode) the sony logo appears for about 10 sec, than disappears for about 5-10 sec, and it's doing this over and over again for about 10min now.
Any ideas ?
ur000s said:
Hi, the first time i tried this i only wiped data/factory reset and nothing else, so when i rebooted from recovery mode i got stuck at sony logo. Took me some time to fix everything (flash stock ICS on device, root phone and install cwm again).
Now i did all this:
0. Locked Boot Loaders should Install CWM
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
9. Follow the steps in aroma installer to install the rom.
10. Untick Reboot Device when installation completed.
11. Go back to CWM & Reboot from there.
12. When System boots up go to Developer Option & Tick "Force GPU Rendering".
13. Active Users Flash Home_Key fix from Addon Section
Now when i rebooted from CWM (recovery mode) the sony logo appears for about 10 sec, than disappears for about 5-10 sec, and it's doing this over and over again for about 10min now.
Any ideas ?
Click to expand...
Click to collapse
Which phone are you using?
Sent from my Nexus 4 running Android 4.3
mihahn said:
Which phone are you using?
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
SE wt19i
ur000s said:
SE wt19i
Click to expand...
Click to collapse
Why did you flash the active user home button fix? It's for Xperia active st17 users! I guess that's the problem
Reinstall the rom like you did before and don't flash the active fix! It should work fine
Sent from my Nexus 4 running Android 4.3
mihahn said:
Why did you flash the active user home button fix? It's for Xperia active st17 users! I guess that's the problem
Reinstall the rom like you did before and don't flash the active fix! It should work fine
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
I actually didn't do that, because when i reboot from CWM (after installing rom) that's where the sony logo flashes in about 10s intervals.
unable to install custom rom
Hi guys..Currently I'm using "Sony Ericsson Xperia Mini Pro".I have rooted my phone by "Flash Tool" for Sony, I also unlocked my bootlocker too that time.
After the rooting process has been finished I have installed "ROM manager" from Play Store. Then I install "CWM v5.0.2.7" via ROM manager. But the whole problem is that now i can't istall custom ROM for my device. Because in the CWM recovey menu it is showing "Xperia Arc[v03] {ICS}".
I am able too wipe factory data, cache and delvik cache, it is also showing installation process of custom rom.After the installation process completed, my phone is not booting into Custom Rom. Its repeatedly showing sony icon, then it is automatically rebooting. I took back up for my phone also,and I can also recover from that.Also I tried "X-parts" app from play store, and installed cwm for xperia 2011 series. But the same "Xperia Arc" is showing till now.
note: I followed all the steps[/B]
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
Which rom did you try to flash and on which firmware were you on? Also what wipes did you do in CWM?
i tried pureness,windows droid and x-gamer with rage kernel.
and steps followed in cwm is as follows
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
i also tried the above steps with wipe battery status too
umesh840 said:
i tried pureness,windows droid and x-gamer with rage kernel.
and steps followed in cwm is as follows
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
i also tried the above steps with wipe battery status too
Click to expand...
Click to collapse
Did you wipe /system also? Its better to select "factory reset" in recovery.
Also try using a different kernel also.
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
you have unlocked your bootloader as well....right??
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
---------- Post added at 01:58 PM ---------- Previous post was at 01:52 PM ----------
Did you wipe /system also? Its better to select "factory reset" in recovery.
Also try using a different kernel also.
2
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
2 suggestions
1. try another recovery if u prefer cwm install another version
2.format
/system
/data
/cache
see what happens then
i dont know any other recovery..
can u suggest a post in xda?
i tried another version of cwm too.
umesh840 said:
i dont know any other recovery..
can u suggest a post in xda?
i tried another version of cwm too.
Click to expand...
Click to collapse
I think Everything will work fine..
Just follow these steps...
In CWM Recovery
Go to Mounts & storage > Wipe cache , wipe data & wipe System
Then Go to Advanced > Wipe Dalvik-cache
and now install your Rom from Sd card
I hope this 'll work..:good: