Related
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
j47d8234554 said:
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
Click to expand...
Click to collapse
KERNEL not suit rom..
jje
How to update from v 1.0
this is my first post, so yeah im a noob, but just want to ask if i was on Resurrection ics v1.0, how could i update? do i just jump to the most recent update, or is there a certain update i have to flash first before moving on? ive tried to flash the v1.4 but then it would'nt boot, then i restored a backup, tried a couple times even from a fresh stock rom, but still it couldnt boot, what do you think the problem is?
sorry for all the questions
i was on resurrection now i dual boot 1.8 with siyah 3.1.2 with D4 rom( which is amazing btw) try 3.1.2 siyah and see if it works - im avoiding RC's and betas for kernel since the brickings, unless you want the features from rc5
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
xXlordyXx said:
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
Thanks mate!!
yugorisfriwan said:
Thanks mate!!
Click to expand...
Click to collapse
hey i am using this remix rom right from the ver 7.4 now on v1.8.1 what i sugesst u first is 2 install v1.7 then u upgrade it 2 the new v1.8.1 by simply flashing it over v1.7 without any wipes that way u wont have any issues in installation
PS: while installing 1.7 u do a full wipe
ie
wipe data/factory reset
wipe cache part
wipe dalvik cache
then install v1.7
then again wipe cache
wipe dalvik cache
Fix permissions
reboot 2 system
boot takes a while?
So how long do i have to wait for the phone to actually boot after updating? So ive flashed the updates, but when i select reboot now, it then comes to the Galaxy s ii i19100 splash screen. Now i have waited for at least 5 minutes, and nothing happened yet, so just restored my backup in fear of something going wrong am i too inpatient or is that just taking to long? how many minutes do i actually have to wait until its a sure flash fail? thx in advance!
5 minutes is too long, are you sure that you have done a full wipe before installing the rom and then wiped the dalvik cache after. The only time when my phone wouldn't boot was when I had forgotten to do the wipes.
anyway just redo the process and make sure you do everything (don't flash any kernels) and just leave the phone for few more minutes than last time. otherwise try to install another version (1.7 for instance) and see if it boots this time
installation problem
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
rzrdelta said:
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
Click to expand...
Click to collapse
hey which rom ur trying 2 install if its v1.7 of remix then first flash the cm9 kernel dwnld'ng the same from OP (original post in page 1 of remix ics thread) section after that reboot 2 cm9 recovery and then flash 1.7 it will be ok
5 minutes are too long mate. before flashing make sure that the current rom you are on has default CM9 kernel (for version 1-1.8)
After that follow the steps:
1.wipe data/factory reset
2.wipe cache partition
3.install main rom
4.go in advance and wipe dalvik cache and then fix permissions
5.wipe cache partition again and reboot
6.after ur first reboot u can then flash kernels,themes,and mods
enjoy
So... if im still on resurrection version 1.0, would installing the stock cm9 kernel work? .... then i could update?
So any workarounds on accessing the external sd on the computer?!!?
xXlordyXx said:
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
This seems to be a bug with the rom. I got the same problem on 1.4 and on 1.8.1. It will only mount the internal mass storage.
To work around this: Mount it with CWM. Works for me.
Hey, I hope I can get some help here. I'm a total noob and I don't know if other similar threads apply to me. Anyway, I have a rooted Xperia Neo V, with ICS 4.0.3 and I used ROM Manager app to casually flash the "Xperia Pureness" ROM I downloaded. I didn't do a full wipe because I was too stupid to look at the instructions. Is this fixable?
download this kernel http://forum.xda-developers.com/showthread.php?t=1566871
read this how to how to install kernel...
http://forum.xda-developers.com/showthread.php?t=1409269
if u do not get it post your queries
Xperia Neo V stuck at SONY logo
hey i also have the same problem. I forgot to wipe dalvik cache. Stuck at SONY logo. I havent unlocked my bootloader , so can i flash kernel mention in the above post.
skral said:
hey i also have the same problem. I forgot to wipe dalvik cache. Stuck at SONY logo. I havent unlocked my bootloader , so can i flash kernel mention in the above post.
Click to expand...
Click to collapse
you can install roms that can be installed on unlocked bootloaders....read this http://forum.xda-developers.com/showthread.php?t=1313445
can you get into CWM ??
samneov said:
download this kernel http://forum.xda-developers.com/showthread.php?t=1566871
read this how to how to install kernel...
http://forum.xda-developers.com/showthread.php?t=1409269
if u do not get it post your queries
Click to expand...
Click to collapse
Thank you. At some point the instructions require that I enter *#06# on my phone but I can't boot, it gets stuck at the Sony logo. Is this step necessary?
as can be interpreted u have a unlocked bootloader( i guess that's right)
you can try to use Sony Ericssion Update service to restore your phone to ICS
read this 1. http://communities-origin.sonyericsson.com/message/176189
and this 2.http://talk.sonymobile.com/thread/30938
see if it helps
I used SEUS to install stock rom . Now its working but all apps are gone.
so i can install any custom rom? Also did this happen because i didnt wipe dalvik cache bfore installing the rom.
samneov said:
you can install roms that can be installed on unlocked bootloaders....read this http://forum.xda-developers.com/showthread.php?t=1313445
can you get into CWM ??
Click to expand...
Click to collapse
skral said:
I used SEUS to install stock rom . Now its working but all apps are gone.
so i can install any custom rom? Also did this happen because i didnt wipe dalvik cache bfore installing the rom.
Click to expand...
Click to collapse
Ya ..you can install custom ROMS now i hope u hv boot loader unlocked ..head over to the Neov development section and download the ROM you want ..Follow the instructions really carefully while installing ROMS
And the answer of your second question is NO. When installing stock ROM or repairing it all apps and setting are gone nothing to do with wipe dalvik cache
Problem persists
So i tried installing pureness once more, this time i made sure i wiped davik cache. Same problem stuck at SONY and so had to revert to stock once more. I havent unlocked BL yet. Is it necessary for installing Pureness. Also can somebody tell me if i am doing it right.
1) used flash tool to downgrade to .562
2)rooted using Doomlords tool
3)Used flash tool to upgrade back to .431
4)Installed cwm auto installer apk from google play
5)Installed cwm
6)Booted into recovery
7)Made a backup
8)Used install from zip option to install Pureness
9) reboot and its stuck
Cant even access cwm since its stuck at that point , so i cant use the backup also right.
First, flash a specific kernel for that ROM.. Look for the link for kernels in the above post!
Flash the kernel first.. Reboot into recovery... Wipe data, wipe cache partition, wipe dalvik cache... And then install zip from sd card!
Reboot your phone! You'll be done now!
flashing kernel
I am guessing for flashing the kernel , i have to unlock bootloader.
You didn't unlock your bootloader?!
You definitely can't flash a custom kernel without unlocking it!
I suggest you go with the official Sony's way..
http://unlockbootloader.sonymobile.com/
BL
but that will void my warranty right and i will no longer be able to use SEUS for reveting to stock.
Yea.. That would void your warranty!
But unlocking the bootloader will allow to install custom ROMs which shall be very fast and smooth as compared to the stock one... and I don't think you'll revert back to stock!
Though relocking can be done but you won't be able to update your phone through over the air updates!
It's your choice!
1. Unlock bootloader using sony's,
Method
2. Flash the custom kernel
3. Get into CWM
4.wipe delvic/data/battery stat
5. Install custom rom
6. Install gapps(if necessary)
7.wipe delvic
8. Reboot
That are common steps
Also use the recommended kernel by the developer
Also follow his instruction...if in doubt serch if still confused post here
Sent from my MT11i using xda app-developers app
Mods ftw
I dont want to unlock bootloader now. Presently having fun with different mods . Once i get tired of them , will try unlocking. Please suggest some useful mods.Currently installed Romcontrol by jjdoctor and walkman for ICS by thilinac.
SAMPLE TUTORIAL
I-SCREAM-11i + Night-Elf kernel RC5 tutorial
================================================== =========
requirement: unlock bootloader
================================================== =========
download I-Scream_official_431.zip [copy to sd card]
download I-Scream_official_431_update.zip [copy to sd card]
download I-Scream_restore_vdd_level.zip [copy to sd card]
download FASTBOOT [extract to PC]
download kernel [boot_ics_v1_rc5.img]
copy/paste it to fastboot folder
rename it to boot.img
open cmd window(by pressing shift+right click mouse & open command window)
turn off phone,connect phone to pc by pressing settings button (now led will turn on will lit blue) [PdaNetA350x64 for 64BIT OS driver]
paste this in cmd - fastboot flash boot boot.img
press enter
================================================== ======================================
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache]
- install zip from sdcard I-Scream_official_431.zip
- install zip from sdcard I-Scream_restore_vdd_level.zip
- reboot into system
LED Flash not working
I was trying out some of the mods (ROM Contol and Walkman music for ICS) and now the LED flash is not working and camera image is upside down. Any idea why?
skral said:
but that will void my warranty right and i will no longer be able to use SEUS for reveting to stock.
Click to expand...
Click to collapse
even if u unlock u r boot loader you would be able to use SEUS....i did so when my phone simple stopped responding after flashing certain kernel
skral said:
I was trying out some of the mods (ROM Contol and Walkman music for ICS) and now the LED flash is not working and camera image is upside down. Any idea why?
Click to expand...
Click to collapse
please read the related threads carefully ....use search.....usually there is a solution given.....else it is a bug which will be fixed in the next release....do a little digging:laugh:
basically i have the same problem.. (neo)
already unlocked bootloader.. apply nightelf kernel successfully..
step i do:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache]
- install zip from sdcard Xperia_Ice_Cream_Pureness_build_3_NeoV.zip
- install zip from sdcard Neo_patch_for_Xperia_Pureness_build_3.zip
- reboot into system
still stuck at sony logo.. then i remove battery, try to boot into cwm..
it still works!
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before..
so.. got any idea or solution? thx in advance...
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
dualsh0ck said:
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
Click to expand...
Click to collapse
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
iamdchosen1 said:
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
Click to expand...
Click to collapse
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
megatpanji said:
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
Click to expand...
Click to collapse
thx but problem above already appeared when i tried to flash pureness build 3 ROM on night-elf kernel..
dualsh0ck said:
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
Click to expand...
Click to collapse
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
iamdchosen1 said:
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
Click to expand...
Click to collapse
according to my first post. here
dualsh0ck said:
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
Click to expand...
Click to collapse
i've already done all wiping in CWM. but still stuck at sony logo.maybe i'll try some other kernel for jjhybrid3.1
Did you tried what I said?
Sent from my MT11i using xda premium
iamdchosen1 said:
Did you tried what I said?
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
i have suave kernel now.. and i want to change to alliance kernel..
dualsh0ck said:
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
Click to expand...
Click to collapse
Yes.
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
dualsh0ck said:
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
Click to expand...
Click to collapse
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
iamdchosen1 said:
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
Click to expand...
Click to collapse
before this with alliance1.1 and suave6 kernel work with no probs.
must i tell this in every reply?
this is the exact step doing all of this..
flash kernel via fastboot thru command prompt window..
and flash rom thru cwm with this step..
- reboot into recovery [power button then repeatedly press volume up]
- [wipe data/factory reset,cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
and chill bro. i have problem here, and i ask about it because i dont know what to do.
and fastboot folder must placed in android-sdk folders or it is not necessary?
bump
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Only boot.img has to be placed in android sdk folder.
Sent from my MT11i using xda app-developers app
Sorry I'm not awake today. Boot.img must be in android sdk and only the fastboot.exe file. I doubt it's got anything to do with that though, if you can successfully flash kernels.
Sent from my MT11i using xda app-developers app
Vampirmaniac said:
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
yup i'm sure.. because i want to flash night-elf kernel + jjhybrid3.1 rom..
as for now i use stock rom because can't successfully flash any custom rom..
my baseband 8x55A-AAABQOAZM-203028G-72.. it is also related?
HEY EVEN I HAD THE SAME SAME PROBLEM BEFORE...its was that i followed all the steps n still was stuck at bootlogo
even if i tried to go to recovery n flash the rom again , it simply said CANNOT MOUNT SD CARD.
So I tried to format my sd card using SDFORMATTER 3.1 and flashed the om again and :laugh: it WORKED
SO BASICALLY TRY TO FORMAT THE SD CARD USING SD FORMATTER software and not the windows default one.
IT WORKED FOR ME AND HOPE IT WILL FOR YOU ALSO
SD CARD FORMATTER 3.1 link google it
hey guys... really need help here...
i just successful UNLOCKED Bootloader,CWM and install custom kernel..
After fastboot the custom kernel (suave) then enter the CWM to flash custom ROM(Xperia_Ice_Cream_Pureness_build_6.00_NeoV)... wipe all data and other common step.. then i reboot the system
My phone get boot loop after that. So i remove the battery then enter the CWM again.. but the colour change to red and detect my phone as "xperia ARC".. plzzz.. i really stuck here
I am using XPERIA Mini Pro sk17i.While installing Avatar Rom,I get an error saying 'error 7' installation aborted saying installation error something from sd card.What should i do?Please suggest.Please help asap.
i get this message:
E:Error in /sdcard/cm-1.1b_34_20130201_mango.zip(Status 7)
Installation aborted
Siddhesh Sapre said:
I am using XPERIA Mini Pro sk17i.While installing Avatar Rom,I get an error saying 'error 7' installation aborted saying installation error something from sd card.What should i do?Please suggest.Please help asap.
i get this message:
E:Error in /sdcard/cm-1.1b_34_20130201_mango.zip(Status 7)
Installation aborted
Click to expand...
Click to collapse
you need to flash a kernel for that rom
or find a rom for locked bootloader
LJegenda said:
you need to flash a kernel for that rom
or find a rom for locked bootloader
Click to expand...
Click to collapse
My friend,I would like to know the proper steps for this installation.
As mentioned on the Avatar Rom forum page,I installed it right in the same way.I would like to know whether this rom requires any prerequisites like:some roms can be installed only if we are on STOCK Gingerbread(rooted and locked/unlocked) or on STOCK ICS(rooted and locked/unlocked) .Or do i need to install some other version of Cyanogenmod and then boot into recovery(cwm) and install?
You mentioned about flashing kernel for the rom.I flashed the boot.img which is included in the zip.But i got the Freexperia boot animation,and not the avatar bootanimation.Please help in all the above issues i mentioned.And yes,before i forget i would like to tell you that i flashed this boot.img and i got thekernel installed successfully(I think so,because through this bootanimation,i was able to go to cwm).But i got the same errors when i tried to installed this rom.I know that you are more experianced memers,so what you are saying maybe true.But on AVATAR ROM Page,they did not tell to flash kernel.Please help.
Siddhesh Sapre said:
My friend,I would like to know the proper steps for this installation.
As mentioned on the Avatar Rom forum page,I installed it right in the same way.I would like to know whether this rom requires any prerequisites like:some roms can be installed only if we are on STOCK Gingerbread(rooted and locked/unlocked) or on STOCK ICS(rooted and locked/unlocked) .Or do i need to install some other version of Cyanogenmod and then boot into recovery(cwm) and install?
You mentioned about flashing kernel for the rom.I flashed the boot.img which is included in the zip.But i got the Freexperia boot animation,and not the avatar bootanimation.Please help in all the above issues i mentioned.And yes,before i forget i would like to tell you that i flashed this boot.img and i got thekernel installed successfully(I think so,because through this bootanimation,i was able to go to cwm).But i got the same errors when i tried to installed this rom.I know that you are more experianced memers,so what you are saying maybe true.But on AVATAR ROM Page,they did not tell to flash kernel.Please help.
Click to expand...
Click to collapse
hi! so when you install kernel (fxp,nAa,Mesa) it will show their boot animation and that is ok so you can use any of those and more, when you boot into recovery (this will delete all your stuff on internal memory)
-wipe data/factory reset, wipe cache, then go to mounts and storage and wipe system, and then advanced and wipe dalvik cache.
-install your rom (if you dont have it on sd card go to mounts and storage and mount and mount usb storage)
-after you installed reboot system
and that should be it, but i went to avatar forum and it is only for mini? can you link it? And did you unlock bootloader?
i hope i helped you
LJegenda said:
hi! so when you install kernel (fxp,nAa,Mesa) it will show their boot animation and that is ok so you can use any of those and more, when you boot into recovery (this will delete all your stuff on internal memory)
-wipe data/factory reset, wipe cache, then go to mounts and storage and wipe system, and then advanced and wipe dalvik cache.
-install your rom (if you dont have it on sd card go to mounts and storage and mount and mount usb storage)
-after you installed reboot system
and that should be it, but i went to avatar forum and it is only for mini? can you link it? And did you unlock bootloader?
i hope i helped you
Click to expand...
Click to collapse
Yes my friend.I have unlocked bootloader and the stuff you have told me is correct,but i alreadyknow that.now the problem is,the bazooka launcher and system ui crashes immediately after rom is installed.Please help.And yes.Avatar rom isalso for xperia mini pro.I searched for it on google and cameto the xda page:http://forum.xda-developers.com/showthread.php?t=2137379
So now,can i replace the bazooka launcher from the zip by recent one on google play and also system ui from avatar rom for xperia mini st15i?peasehelp.why does that crash happen?its like i have got full rom,but can't access it.please help.
Siddhesh Sapre said:
Yes my friend.I have unlocked bootloader and the stuff you have told me is correct,but i alreadyknow that.now the problem is,the bazooka launcher and system ui crashes immediately after rom is installed.Please help.And yes.Avatar rom isalso for xperia mini pro.I searched for it on google and cameto the xda page:http://forum.xda-developers.com/showthread.php?t=2137379
So now,can i replace the bazooka launcher from the zip by recent one on google play and also system ui from avatar rom for xperia mini st15i?peasehelp.why does that crash happen?its like i have got full rom,but can't access it.please help.
Click to expand...
Click to collapse
wipe dalvik cache
if that doesent work, wipe data
if that doesent work re-flash after full wipe (data/factory reset, cache...)
if that doesent work find a new rom (i could recomend some of them...)
suggest me roms
LJegenda said:
wipe dalvik cache
if that doesent work, wipe data
if that doesent work re-flash after full wipe (data/factory reset, cache...)
if that doesent work find a new rom (i could recomend some of them...)
Click to expand...
Click to collapse
please suggest me some good roms which are excellent at battery prformance(gb/ics/jellybean):silly:
Siddhesh Sapre said:
please suggest me some good roms which are excellent at battery prformance(gb/ics/jellybean):silly:
Click to expand...
Click to collapse
ok my recomendation
GB- rage kernel - xgamer rom + andreno boost (mod) + setcpu make a profile for when the screen is off, set frequency to lowest on both (max freq and min freq.) for longest battery life (2.3.7)
ICS- panic kernel - ultimate hd rom (4.0.4)
JB - mesa kernel - havendroid rom dark demon edition rom (i'm using it for 3 weeks now) + Snapdragon™ BatteryGuru (4.2.2)
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
Which rom did you try to flash and on which firmware were you on? Also what wipes did you do in CWM?
i tried pureness,windows droid and x-gamer with rage kernel.
and steps followed in cwm is as follows
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
i also tried the above steps with wipe battery status too
umesh840 said:
i tried pureness,windows droid and x-gamer with rage kernel.
and steps followed in cwm is as follows
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
i also tried the above steps with wipe battery status too
Click to expand...
Click to collapse
Did you wipe /system also? Its better to select "factory reset" in recovery.
Also try using a different kernel also.
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
you have unlocked your bootloader as well....right??
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
---------- Post added at 01:58 PM ---------- Previous post was at 01:52 PM ----------
Did you wipe /system also? Its better to select "factory reset" in recovery.
Also try using a different kernel also.
2
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
2 suggestions
1. try another recovery if u prefer cwm install another version
2.format
/system
/data
/cache
see what happens then
i dont know any other recovery..
can u suggest a post in xda?
i tried another version of cwm too.
umesh840 said:
i dont know any other recovery..
can u suggest a post in xda?
i tried another version of cwm too.
Click to expand...
Click to collapse
I think Everything will work fine..
Just follow these steps...
In CWM Recovery
Go to Mounts & storage > Wipe cache , wipe data & wipe System
Then Go to Advanced > Wipe Dalvik-cache
and now install your Rom from Sd card
I hope this 'll work..:good: