Related
I am trying to use 'adb' from the android dev kit but I cannot see the devices, i.e. 'adb devices' doesn't report any devices. It appeared to be working earlier this evening but not any more. I was going to push a rom file to my rooted phone but obviously since I no longer see the device I am stuck. I rooted yesterday and installed the maximus rom but my phone went into a loop of restarting. Unfortunately I didn't backup before I rooted and installed Maximus rom.
Can anybody offer any help? I am using Mac OSX.
Desperate since phone is now effectively redundant
adiemask said:
I am trying to use 'adb' from the android dev kit but I cannot see the devices, i.e. 'adb devices' doesn't report any devices. It appeared to be working earlier this evening but not any more. I was going to push a rom file to my rooted phone but obviously since I no longer see the device I am stuck. I rooted yesterday and installed the maximus rom but my phone went into a loop of restarting. Unfortunately I didn't backup before I rooted and installed Maximus rom.
Can anybody offer any help? I am using Mac OSX.
Desperate since phone is now effectively redundant
Click to expand...
Click to collapse
try this: http://forum.xda-developers.com/showthread.php?t=1706918
if it didnt help u just reply and we´re gonna look whats next to unbrick ur phone
Hi
Thanks for your reply, I have hit the 'Thanks' button
I read the posting you referenced but it doesn't really offer a solution to my problem.
As described earlier I rooted my phone and flashed a Rom (Maximus) succesfully but on turning the phone on after installing the new Rom I got into a cycle of the phone rebooting without actually getting past the lock screen. My thoughts at that stage were to re flash using stock rom but on running fastboot and plugging into my Mac OSX machine via USB, the phone doesn't show up in 'devices' on the Mac. I have also tried 'adb devices' form within Android Dev Tools and although 'adb' runs fine no device is reported. Of course without devices being avaialble to 'adb' then I cannot reflash!
I have also tried from within a bootcamp installation of 'Windows XP' installed on the mac with the same results, this with 'HTC Sync' installed and therefore providing the USB Drivers required within Windows.
I have tried logging into fastboot using 'power' and 'Down Volume' at various stages of the boot process on the phone but have never seen the phone within devices.
Clearly prior to installation of the Rom (Maximus) I could see devices at both the Finder window on the Mac and from adb devices.
Any help or insight you could provide would be very gratefully received
Ok ok ok dont worry
I had to read a bit and found quit much german threads where they flash back the stock rom
as is suggested u cant flash it with odin...
the only solution i woul suggest is that u have to find a computer running windows
there its very easy to restore the stock with the methods u described earlier in the thread...
hope u get done let me know what happend
=)
The question remains; how can I flash anything be it a hacked rom or an official rom when I cant see the 'device' in both windows and mac osx?
I think what I am looking for is a reason why the phone isn't seen when plugging in via USB. Once it is seen as a 'device' I will be able to flash anything via 'adb'.
Thank you for your continued interest and assistance
ok so u know how the get it back but ur phone is not really recognized by ur computer
but i found a method using the bootloader
the problem is that the instructions are in german
but i think if u google a bit u may find it
Don't know if I misunderstood what you said..but to get into recovery, you hold volume down and the power button when the phone is turned off. Not during the boot process.
Yes you can do it with bootloader (power+volume down)
Sent from my HTC Salsa C510e using xda premium
moksha098 said:
Yes you can do it with bootloader (power+volume down)
Sent from my HTC Salsa C510e using xda premium
Click to expand...
Click to collapse
Yes, I know that. He said he attempted to do that DURING the boot process. I was stating that he had to do it while the phone was powered down.
Guys, I can get into recovery no problem. The issue is that my phone doesn't show up in devices on the mac finder window and hence when I run 'ADB Devices' from the mac when the phone is plugged into the mac with USB no device is found and so no serial number is reported in my terminal window on the mac. If I can get to see the device with 'ADB' I can push the rom and recover the phone. At the moment the phone is bricked.
Thanks guys for your continued assistance.
adiemask said:
Guys, I can get into recovery no problem. The issue is that my phone doesn't show up in devices on the mac finder window and hence when I run 'ADB Devices' from the mac when the phone is plugged into the mac with USB no device is found and so no serial number is reported in my terminal window on the mac. If I can get to see the device with 'ADB' I can push the rom and recover the phone. At the moment the phone is bricked.
Thanks guys for your continued assistance.
Click to expand...
Click to collapse
But if this doenst work why dont u try the method with the recovery mode or the bootloader i suggested
Hi guys.
Im caught on a very difficult situation.
My Phone an HTC ONE X (Evita) is stuck in bootloader and has no OS. I have a recovery installed (TWRP 2.6.3.0) and Im able to access it BUT when I mount the sd card my PC is unable to recognize it. Its a Win 7 64 bit OS with the HTC 4.2.0.001 driver installed, It has worked fine in the past, I have adb and bootloader drivers installed and still unable to detect it VIA fastboot.
The error I get is USB Device Not Recognized.
I have no way of flashing a new rom since I cant even access my phones storage.
Here are the details of my Phone.
****TAMPERED****
****UNLOCKED****
EVITA PVT SHIP S-OFF RL
CID-1111111
HBOOT-1.09.0000
RADIO-0.17.32.09.12
OpenDSP-v28.1.0.32.0504
eMMC-boot
Apr 2 2012,21:08:24
AND Yes I didn't knew and did a factory reset VIA Bootloader.
That ****ed up my storage BUT I was able to fix that and Im able to mount ir VIA Recovery, Still mine and a friends win 7 PC get the USB Not Recognized Error.
So what options do I have??
Hope U guys can Help me.
Wrong forum mate.need to go to htc one xl forum.
khairulez said:
Wrong forum mate.need to go to htc one xl forum.
Click to expand...
Click to collapse
I know dude, it was originally posted there, but an admin moved my tread for somw unknown reasson :/
DillingerErick said:
Hi guys.
Im caught on a very difficult situation.
My Phone an HTC ONE X (Evita) is stuck in bootloader and has no OS. I have a recovery installed (TWRP 2.6.3.0) and Im able to access it BUT when I mount the sd card my PC is unable to recognize it. Its a Win 7 64 bit OS with the HTC 4.2.0.001 driver installed, It has worked fine in the past, I have adb and bootloader drivers installed and still unable to detect it VIA fastboot.
The error I get is USB Device Not Recognized.
I have no way of flashing a new rom since I cant even access my phones storage.
Here are the details of my Phone.
****TAMPERED****
****UNLOCKED****
EVITA PVT SHIP S-OFF RL
CID-1111111
HBOOT-1.09.0000
RADIO-0.17.32.09.12
OpenDSP-v28.1.0.32.0504
eMMC-boot
Apr 2 2012,21:08:24
AND Yes I didn't knew and did a factory reset VIA Bootloader.
That ****ed up my storage BUT I was able to fix that and Im able to mount ir VIA Recovery, Still mine and a friends win 7 PC get the USB Not Recognized Error.
So what options do I have??
Hope U guys can Help me.
Click to expand...
Click to collapse
Hey bro, it was happened with one of my frnds nxs7 , and on our research somehow partition were being deleted due too which now there is no system partition nor for memory. Srry bro but emmc chip had been destroy... Discuss it with recognized dev. If they can help u again in creating partitions may b it would wrk. Bst of luck
veer.killerboy said:
Hey bro, it was happened with one of my frnds nxs7 , and on our research somehow partition were being deleted due too which now there is no system partition nor for memory. Srry bro but emmc chip had been destroy... Discuss it with recognized dev. If they can help u again in creating partitions may b it would wrk. Bst of luck
Click to expand...
Click to collapse
Thanks bro, Ill Give that a try, Im going to start looking for a new phone in the meantime u_u
DillingerErick said:
Thanks bro, Ill Give that a try, Im going to start looking for a new phone in the meantime u_u
Click to expand...
Click to collapse
what do you mean by not recognized? can't find phone storage in windows explorer when connected? that's normal (or at least was) when being in recovery. you need to use "adb sideload rom.zip" to copy a rom onto your phone and install it. don't forget to flash the boot.img in fastboot too. make sure the rom is made for your device!
reaper90 said:
what do you mean by not recognized? can't find phone storage in windows explorer when connected? that's normal (or at least was) when being in recovery. you need to use "adb sideload rom.zip" to copy a rom onto your phone and install it. don't forget to flash the boot.img in fastboot too. make sure the rom is made for your device!
Click to expand...
Click to collapse
Ive already tried adbsideload and I get a "device not found" message.
And yeah, windows does not recognize my device, but I can access my storage via recovery and all seems to be fine there.
I get a USB not recognized message everytime I plug my phone in a computer, I ve tried several computers without success .
Thanks for Your help.
DillingerErick said:
Ive already tried adbsideload and I get a "device not found" message.
And yeah, windows does not recognize my device, but I can access my storage via recovery and all seems to be fine there.
I get a USB not recognized message everytime I plug my phone in a computer, I ve tried several computers without success .
Thanks for Your help.
Click to expand...
Click to collapse
it takes some time to recognize the phone, start adb with "adb devices" for example, then wait some minutes and try again
Try installing TWRP 2.8, it has better support to show it in windows.
Kinda off-topic, how did you manage to mount the SD card? I can't seem to be able to do that.
reaper90 said:
it takes some time to recognize the phone, start adb with "adb devices" for example, then wait some minutes and try again
Click to expand...
Click to collapse
Tanks for replying, I tried that already without success, also I tried restarting the adb server, same result on multiple win 7 64 bits PCs
I cant flash another recovery, my phone is not recognized by my PC o I dont have a way of copying twrp 2.8 to my sdcard and flash it.
I can access TWRP 2.7 and im able to mount the SD card, or at least the phone says that it mounted it, but its not recognized by my PC.
I can access my sd card on the phone via the recovery file explorer.
Hi, I am trying to unlock a Galaxy J1 Ace SM-J111F/DS for my colleague. The phone belonged to his younger brother who had passed away in an accident, now that he's gone, we have no information as to now to unlock his phone.
I have tried researching and searching around for methods but to no avail. I was hoping maybe someone here could provide some assistance
A factory reset is out of the question as he needed to access information stored inside the phone
Some device details:
Device is locked by a pattern lock
Unable to unlock via Google account(No one in his family knows his account name/password)
Phone is not Rooted
Phone is FRP Locked
Things I have wanted to try and done so far:
Intended to flash a bypass to unlock the lock screen
Attempted to flash a custom recovery in order to flash the bypass, however FRP is locked and it does not allow a custom recovery to be flashed
Attempted various methods of "security exploits" to unlock, but appears to be patched on current firmware
Tried to search methods of unlocking FRP, however all the methods I've seen so far requires access to developers option, or requires a flash of stock firmware.
Tried accessing device via ADB, however it does not work as USB debugging is not enabled
I'm currently out of options trying to do this by myself, we would really appreciate it if someone could help us out in this
If powered on, and plugged in to PC, is it 'seen' at all?
robneymcplum said:
If powered on, and plugged in to PC, is it 'seen' at all?
Click to expand...
Click to collapse
Yes, it is "seen", but I can't do anything else to it
If it is seen, there is a chance you can get data off it.
You can install' minimal ADB and fastboot' and the USB drivers for the phone on your PC. If the phone is not encrypted you should be able to browse the phone storage in an adb shell and to copy files or directories with adb pull.
gl
Chilli
Chilli71 said:
You can install' minimal ADB and fastboot' and the USB drivers for the phone on your PC. If the phone is not encrypted you should be able to browse the phone storage in an adb shell and to copy files or directories with adb pull.
gl
Chilli
Click to expand...
Click to collapse
I have tried that as well, the only way I can get the phone to appear under "adb devices" is to select "apply update from adb" via recovery, even then it's only via sideloads, running shell returns an error
XenoJin said:
I have tried that as well, the only way I can get the phone to appear under "adb devices" is to select "apply update from adb" via recovery, even then it's only via sideloads, running shell returns an error
Click to expand...
Click to collapse
Ill jump in this one to. im in a similar situation. I have a lg g vista that no conventional method is working to bypass frp. Device is not encrypted. My prob is. I believe if i can downgrade back to stock kk which the phone was released with it didnt hve frp then so bam im in. But lgflash tool wont downgrade. Always errors. Loads of diffrent settings have been made. Also followed guides to a t.
But in ure case to if it is possible to dlmode and odin back to kk or earlier u should the be able to skil the google login totally. I dont know if ure device came with kk from factory or lolipop. Frp was implemented in loli so kk should be good. Maybe
Two comments:
1) I have a Huawei G8 in front of me. I worked all weekend with it with bootloader/fastboot. I wanted to test the lock screen/adb behavior, But to my surprise ADB does not find it w/ and w/o lockscreen. --> There are different possibilities why the phone does not show up (it worked in the past with this phone/notebook, but quit working). Before you flash make sure that your setup is working (best with an identical mobile). It seems that USB connection can behave different in Bootloader/Recover/Android OS mode.
2) I made a dirty flash (w/o erasing flash) of Lollipop over Marschmallow last weekend. The result was that many directories including SDCard0 where not accessible. Also user data was not accessible. And you have always the chance that you mess something up when flashing and you loose the content.
If the data is really important your friend could pay a data rescue company (if you don't loose your face). I'm pretty sure that programs exist that can be loaded into RAM with bootloader (fastboot boot) that provide an interface to the PC (in the easiest case, adb again).
Chilli
I'll try to get as straight tot he point as possible.
Been using my Mobile one touch pix 7 for a little over a year and always installed Ota updates. Well I rooted the tablet not too long ago, forgot which method I used, but was working fine.
an Ota update came through and totally forgot it was rooted, and tried to install it, at which point the whole tablet got bricked.
It ended up in recovery, and I selected due to failure, to format and wipe the data.
Anyhow, The unit will stay at the boot screen for a while then show command error and then show the recovery screen, my only options are:
reboot
update from sd card
update via adb
update via memory
reboot Bootloader
power off
Well I've tried updating by downloading system images via adb, they return a verification error.
I've tried using adb side load to try to install an Ota update file I found for it, returns a verification error.
I cannot get into download mode, fast boot mode I think does not work as windows reports 3 android devices, but the mobile update software cannot see anything, and fast boot gets stuck at waiting for devices.
I suspect the tablet is for lack of a better description totally bricked and just a paperweight.
I am at a loss of what to try from this point. I'm sure wiping the data after the failed update killed it completely but not sure.
Anyone have any guidance here? I've downloaded a few images from the web I found that say they are for this tablet model, but still getting verification error.
Is there any flashing software I can get that may be able to access the tablet or can I copy a file to the scared and have it try to run an update from there. I don't care if it is rooted or not, just want to get it usable again.
I can run Mac OS, windows 10, windows 7, windows xp, or even have no issue getting a linux version going, whatever will work best for this I can use it. windows 10 I was able to manually add the drivers but windows 7 is not letting me do it the same way. I can connect via adb sideload only, no other adb functions seem to work.
I'm not a total news when it comes to custom rooms, as I have done it with another tablet, and an android car radio, but those were pretty straight forward and bootable so never ran into a brick issue yet.
I have a feeling this is toast and I hope that is not the case.
If anyone here can help out, I would appreciate it.
Thanks again....
Need help here to. Been searching with no luck. Any my issue is.
Rooted kingroot, flashed twrp with flashify and now I'm stuck on twrp. Been searching for any custom stock rom. I forgot to unlock the bootloader but I did enable usb debugging (i didn't see any oem options).
Any k 28532Jonsunf of help would be greatly appreciated.
This sorta happen to me. I rooted pixi 7 with kingroot, and was able to delete a lot of bloatware. However, when I was using lucky patcher it pretty much messed up the play store. But it was fine. I could download stuff through the Internet. But sooner or later I needed to fix it. Tryed a lot of ways but it didn't help. So I factory reset the tabletand now im stuck at the Setup Wizard. It just won't let me let me through. I thought its was over, but then I get a message saying there is an update available. So I download it and installed it. But all I get at the end is error. So now I need to flash it with stock. I tried the img. too, but it doesnt show up in the recover menu. If you found a solution please tell me
Can anyoonneee help me find a good Custom Rom for the alcatel one touch pixi 7 (9006W)? Sucks that there's not much info for this device (probably cause the device sucks lol) I'm running on lollipop 5.0.2 and am not able to get OTA update due to rooting. Unrooting didn't help. It seems only answer is custom rom but don't want to risk bricking it as I don't have a computer at home. Also, I am new to this so if anyone can share some insight, I'd be eternally grateful
P.s
It's a t mobile device but I only use it on wifi.
Am using kingroot.
Have never installed a custom rom
****ing device is 8 gigs. 1 gig Ram.
Is it possible to get Nougat?
Help meeee lol
Here you go:
https://1drv.ms/u/s!AshkuG2cY1T0xPZArSsy6iO1e_UnPw
This is a zip file with all the tools and files you need and instructions on how to use them.
What it covers:
Restoring bricked device (as long as download mode still works)
Unlocking bootloader (firmware dependent)
Rooting (any firmware)
Installing a custom recovery (any firmware)
Installing a custom ROM (any firmware)
I made this because all the guides for this phone were seemingly outdated, and some required tools and files were incredibly hard to find. Didn't want anyone else going through the pain I went through to break this phone open.
Thank you so much for uploading this. The charging port on my Nexus died and I have to use my old Note 2 as a backup, but I forget how this old piece of junk works. This should be very helpful.
I rooted and flashed twrp to boot to a triangle saying system software not authorized. Tried 3 firmwares and wont boot correctly. I got error about firmware update failed use kies... Kies won't do anything and kies 3 says unsupported device. On the 3rd firmware (root66 rooted stock ) firmware file I now am back to the original triangle system software not authorized by Verizon ..
How do I fix this?!?
robles4242 said:
I rooted and flashed twrp to boot to a triangle saying system software not authorized. Tried 3 firmwares and wont boot correctly. I got error about firmware update failed use kies... Kies won't do anything and kies 3 says unsupported device. On the 3rd firmware (root66 rooted stock ) firmware file I now am back to the original triangle system software not authorized by Verizon ..
How do I fix this?!?
Click to expand...
Click to collapse
Did you read my guide? You can't flash TWRP unless you successfully unlocked your bootloader with Casual, otherwise you are limited to SafeStrap. Also you can't restore with Kies, you have to use Odin and the files I've included to restore.
yambag said:
Thank you so much for uploading this. The charging port on my Nexus died and I have to use my old Note 2 as a backup, but I forget how this old piece of junk works. This should be very helpful.
Click to expand...
Click to collapse
Nice to see people still looking for something like this, so my guide wasn't for nothing!
I was geeked to see this!! but then i got "This item might not exist or is no longer available"
I take it back.. i let it sit on the "failed" page for like 2 min, and randomly it popped up with a download!
Well the auto bootloader didn't work, so now i'm at the root section. However i'm getting an error where ADB isn't detecting my phone. USB debug is on, and i'm definitely in media mode and not installer. The phone shows up in windows and looks good, but adb doesnt detect. I opened command prompt and ran adb /? and found adb devices -l, and it reports "list of devices" and theres nothing in the list. I can't imagine why it's not seeing it. I tried turning on and off debug mode, switching from camera mode to media, changing usb ports. still nothing comes up, but windows sees it fine. grrrr
*edit, well since we can't delete posts i'll leave this here, because i have to. But what i did was re-open the "no you verizon" and it showed DISCONNECTED also. I changed usb ports like 3 times, turned usb debug on and off, changed from installer mode, to camera, to media mode, restarted the phone and the computer multiple times.. and then it just all of a sudden was detected again. So i went with it and it seems to have worked.
-it took 3 times to actually work, you noted it may take multiples, and it sure did. I ran it through the command prompt so i could read the text, and it took 5 times longer and reported much more stuff when it actually worked.
-final edit: if you can't unlock your bootloader, you're still stuck with ditto or alliance from 2014, and lots of apps won't update on android that old. So if you thought this guide was some holy grail, it is not. But still useful if you need the assist, so thanks to the author.
Hi, total noob here, I just bought Verizon note 2 at a yard sale but there is a pin I don't know. When I went to do a factory reset it booted into TWRP, so I am assuming is rooted. Do I need to be able to get into the phone to use your tools? I know nothing about TWRP. I would like to install a newer Android version and unlock it so I can use TMobile. Thanks
Something wrong...
when i try to load this file from the packages folder i get an error message:
"md5 error! Binary is invalid"
none of the other three works for me. they all come back ailed.
any suggestions?
awesome! thanks for posting this, just found my old note 2 and want to get it up and running again for the kids.
Kudos!
Used this to get my Note 2 up and going again temporarily until the Pixel 4a release...
NOTE: I had strange issues with Odin on my modern X570 board (USB 3.2 Gen 2) where I did not receive any errors, yet the process would randomly seem to time out. Sometimes I'd get stuck at flashing boot.img, sometimes it would hang up at the start, once I got to flashing system.img and it seemed to hang....
Used an older PC circa 2013, no issues! Not the first time I've had issues with this newer motherboard and older USB flashing interfaces; had the same issue on my Note 8 (RIP) as well.
excited to try this.
I'm on some rooted 4.4.2 stock-looking rom. Recovery doesn't look custom.
Hoping to be able to install a working Oreo or Pie ROM
great post, bought a couple of these for almost nothing and am having fun playing with them. sadly they are both 4.4.2 but its great fun anyway.
SilentNightx said:
I made this because all the guides for this phone were seemingly outdated, and some required tools and files were incredibly hard to find. Didn't want anyone else going through the pain I went through to break this phone open.
Click to expand...
Click to collapse
Thank you for sharing. Always difficult to find those tools after a few years!!!