Can somebody help me?
my xperia u is very hard bricked after installed TheBrainsRom i mounted system and disabled flash recovery
i have not my bootlader unlocked so i cant enter in fastboot mode and i cant enter in flash mode (dont know why)
sometimes when i try turn on it appears 3 red lights (battery empty)
and when i try charge appers the red light and doesn´t appers the charge animation what i do?
peek
let it charge for a 3-5 hours then flash stock ftf via flash tool
:highfive:
ThIgEr3dS said:
Can somebody help me?
my xperia u is very hard bricked after installed TheBrainsRom i mounted system and disabled flash recovery
i have not my bootlader unlocked so i cant enter in fastboot mode and i cant enter in flash mode (dont know why)
sometimes when i try turn on it appears 3 red lights (battery empty)
and when i try charge appers the red light and doesn´t appers the charge animation what i do?
Click to expand...
Click to collapse
relax bro
just charge it for 15-20 mins on wall charger
remove battery
reinsert it
dun try to swtich it on ..
and try flashing in flashmode
Dude don't panic same thing had happened to me so just charge for 4 to 5 hours and flash stock ftf it will work.....
Sent from my ST25i using xda premium
Related
I have a hard bricked Sony Xperia P.i flashed a custom rom for it but there are some bugs on it(when it booted up it stucks in lock screen and onceagain restarting. )so i off my phn by pressing keys while it restarting,.another bad thing is there it has 20% of battry persantage ..opz after i off it ,my phone never boot up. It only shows red LED for a couple of seconds when connected to external charger or USB port.
No entry into fastboot or flash mode.im on unlocked boot loader...plzzz help me im in a serious problem now...plzzz:crying::crying:
(sorry for my bad english)
Nipunupekshana1 said:
I have a hard bricked Sony Xperia P.i flashed a custom rom for it but there are some bugs on it(when it booted up it stucks in lock screen and onceagain restarting. )so i off my phn by pressing keys while it restarting,.another bad thing is there it has 20% of battry persantage ..opz after i off it ,my phone never boot up. It only shows red LED for a couple of seconds when connected to external charger or USB port.
No entry into fastboot or flash mode.im on unlocked boot loader...plzzz help me im in a serious problem now...plzzz:crying::crying:
(sorry for my bad english)
Click to expand...
Click to collapse
First of all make sure the phone is off, press power + volume up untill you feel 1+3 vibrations(sometime 1+1+3).
See if you can charge it, though charging led may not turn on, leave it on charger for an hour or two, then force it off again and try fastboot again.
ChikeD said:
First of all make sure the phone is off, press power + volume up untill you feel 1+3 vibrations(sometime 1+1+3).
See if you can charge it, though charging led may not turn on, leave it on charger for an hour or two, then force it off again and try fastboot again.
Click to expand...
Click to collapse
Had this same issue while using a custom ROM , resolved by using SUS . Connect your phone to computer and let it charge first for an hour , then open SUS and follow the instruction .
6598855 1076
sanjithxp92 said:
Had this same issue while using a custom ROM , resolved by using SUS . Connect your phone to computer and let it charge first for an hour , then open SUS and follow the instruction .
Click to expand...
Click to collapse
Thankz for helping frdz but im on unlocked bootloader i think so i can't use sus ...
2859242 5984
ChikeD said:
First of all make sure the phone is off, press power + volume up untill you feel 1+3 vibrations(sometime 1+1+3).
See if you can charge it, though charging led may not turn on, leave it on charger for an hour or two, then force it off again and try fastboot again.
Click to expand...
Click to collapse
but i cant see any vibrations on my phn by pressing keys when it connect to my sony wall charger only appering red led for a 1 sec then no other resultz ..thnakz for helping bro...
Nipunupekshana1 said:
but i cant see any vibrations on my phn by pressing keys when it connect to my sony wall charger only appering red led for a 1 sec then no other resultz ..thnakz for helping bro...
Click to expand...
Click to collapse
Have you tried leave it charging even there no led indication?
i also face this problem !!!
There is a solution Just hold that power and volume up key until u hear three vibraions then leave the phone it will completly off. then download Stock .ftf file depnding upon your phone modal and flash it through flashtool .
Done :good:
Nipunupekshana1 said:
but i cant see any vibrations on my phn by pressing keys when it connect to my sony wall charger only appering red led for a 1 sec then no other resultz ..thnakz for helping bro...
Click to expand...
Click to collapse
Hello guys.This is my problem with Xperia P.I tried to update CWM from 6.0.1.2 to 6.0.3.0 in hope that I will get rid of that status error 7 when trying to install CM 11.Ok so what I did:i downloaded an update for CWM in zip format,i transferred the zip files to my xperia p internal storage then disconnected the phone from pc,then I booted the phone In CWM and from there I tried to update CWM by selectin install from zip sd card the zip archive.It said It was succesfull then asked for reboot and that was.After that the phone gone dead,no response from it even when I tried to power it on or to reset it by key combinations nothing worked.Even when I plugged it on charger nothing or in my pc usb.So when this happened my phone was rooted/unlocked bootloader and running latest JB build 6.1.2.A.100.So what I tried so far:i plugged it in wall charger for 6+ hours in hope I will get a life sign from it and nothing.Then I tried to disconnect its battery,i know its non removable but it has a cord attached that can be detached and I did it for about 5 mins.After that I reconnect the battery and plugged it in.Well I got a solid red led on it and I thought oh well it seems it worked but after exactly 15mins the red led goes out and nothing happens after it.At the moment I am writing this the phone already is dead by 24 hrs+.And yea I tried to connect it in flash mode for flashtool but not a sign at all.My pc doesn't detects it.So is there any hope left for my phone?If so please give more solutions.Oh and another thing it seems that after the red light goes off after 15 mins and I unplug it from charger and reconnect it the red led comes again and the process can be repeated.So should I try this way to charge it until it has enough power to do some responses?
DeusEx211 said:
Hello guys.This is my problem with Xperia P.I tried to update CWM from 6.0.1.2 to 6.0.3.0 in hope that I will get rid of that status error 7 when trying to install CM 11.Ok so what I did:i downloaded an update for CWM in zip format,i transferred the zip files to my xperia p internal storage then disconnected the phone from pc,then I booted the phone In CWM and from there I tried to update CWM by selectin install from zip sd card the zip archive.It said It was succesfull then asked for reboot and that was.After that the phone gone dead,no response from it even when I tried to power it on or to reset it by key combinations nothing worked.Even when I plugged it on charger nothing or in my pc usb.So when this happened my phone was rooted/unlocked bootloader and running latest JB build 6.1.2.A.100.So what I tried so far:i plugged it in wall charger for 6+ hours in hope I will get a life sign from it and nothing.Then I tried to disconnect its battery,i know its non removable but it has a cord attached that can be detached and I did it for about 5 mins.After that I reconnect the battery and plugged it in.Well I got a solid red led on it and I thought oh well it seems it worked but after exactly 15mins the red led goes out and nothing happens after it.At the moment I am writing this the phone already is dead by 24 hrs+.And yea I tried to connect it in flash mode for flashtool but not a sign at all.My pc doesn't detects it.So is there any hope left for my phone?If so please give more solutions.Oh and another thing it seems that after the red light goes off after 15 mins and I unplug it from charger and reconnect it the red led comes again and the process can be repeated.So should I try this way to charge it until it has enough power to do some responses?
Click to expand...
Click to collapse
Following link is a complete guide on how to repair a bricked phone. I hope it offers a solution for your problem too.
Beverke said:
Following link is a complte guide on how to repair a bricked phone. I hope it offers asolution for your problem too.
Click to expand...
Click to collapse
Well I hope that I can recover my phone.
DeusEx211 said:
Well I hope that I can recover my phone.
Click to expand...
Click to collapse
if ur bootloader wasn't unlocked use SUS or sony pc suite to recover ur pc .... nd correct title , this isnt hard brick , i think u flashed a kernel from a different device ... if bootloader was unlocked then flash stock ftf using flashtool.. and flashtool works only in windows 7 and below ... making it work in windows 8 is tedious turn off ur phone and then hold volume down button then connect usb cable if green led lights ,that is flashmode
suyash691 said:
if ur bootloader wasn't unlocked use SUS or sony pc suite to recover ur pc .... nd correct title , this isnt hard brick , i think u flashed a kernel from a different device ... if bootloader was unlocked then flash stock ftf using flashtool.. and flashtool works only in windows 7 and below ... making it work in windows 8 is tedious turn off ur phone and then hold volume down button then connect usb cable if green led lights ,that is flashmode
Click to expand...
Click to collapse
I am running Windows 7 and the bootloader is unlocked.Also I cant use flashtool or any software from pc because the phone it doesn't get detected.But if I plugged it on pc USB it does give a red light for exactly 14 mins then the red led goes off.Also any key pressing or key combinations doesn't help as I don't get any response from phone.So I am really sure its hard brick.Only sign from it is the red led that goes off after 14 mins.
So anymore ideas?Does my phone was hard resetted after I detached the battery for 5 mins and then reattached it?Because before this I didn't got the red led.And also should I try to recharge my phone by pluggin in it in charger wait 14 mins till red led gets off then repeat this process?
DeusEx211 said:
I am running Windows 7 and the bootloader is unlocked.Also I cant use flashtool or any software from pc because the phone it doesn't get detected.But if I plugged it on pc USB it does give a red light for exactly 14 mins then the red led goes off.Also any key pressing or key combinations doesn't help as I don't get any response from phone.So I am really sure its hard brick.Only sign from it is the red led that goes off after 14 mins.
So anymore ideas?Does my phone was hard resetted after I detached the battery for 5 mins and then reattached it?Because before this I didn't got the red led.And also should I try to recharge my phone by pluggin in it in charger wait 14 mins till red led gets off then repeat this process?
Click to expand...
Click to collapse
see u turn off phone .... then hold volume down and then plug usb , green led should light up... thats flashmode ... if flashmode come then phone repairable using flashtool with proper drivers. u flashed wrong krnel it seems
suyash691 said:
see u turn off phone .... then hold volume down and then plug usb , green led should light up... thats flashmode ... if flashmode come then phone repairable using flashtool with proper drivers
Click to expand...
Click to collapse
And how I am supposed to turn phone off when I get no sign from it when I am pressing volume or power keys.The only sign I get is the red led that after 14 mins goes off.Yea I flashed/updated a wrong CWM for my phone.And how that could screw my phone that bad I don't have any idea.
Just remove the battery chord from the battery (not the charger chord). This means, your phone is in turn off mode. Then reconnect it. Then try those flashmode combinations.
And for any further status 7 issues refer to my guide. Link is in my signature
Sent from my Nexus 5 using xda app-developers app
when red led isnt lit up and ur phone isnt connected to either charger or pc then it means its off ..... then hold only volume down button (u won't get any response right now) then attach usb cable while holding volume down ... green led will definitely light up and then flash stock ftf
Siddharth121 said:
Just remove the battery chord from the battery (not the charger chord). This means, your phone is in turn off mode. Then reconnect it. Then try those flashmode combinations.
And for any further status 7 issues refer to my guide. Link is in my signature
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Well I removed the bat cord couple of times then reconnect it and tried flasmode comb but the pc still doesn't detects my phone.Only red led I get that goes off after 14 mins.
Bro, then this may be a hard brick. Try some hardbrick procedures. Or take your device to some local shops. They have a flashing device, which flashes stock firmware. Service centres will cost u very much.
Sent from my Nexus 5 using xda app-developers app
Siddharth121 said:
Bro, then this may be a hard brick. Try some hardbrick procedures. Or take your device to some local shops. They have a flashing device, which flashes stock firmware. Service centres will cost u very much.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
And what are the hardbrick procedures?
Siddharth121 said:
Bro, then this may be a hard brick. Try some hardbrick procedures. Or take your device to some local shops. They have a flashing device, which flashes stock firmware. Service centres will cost u very much.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
its not hard brick ... in hard brick you don't even get to see the red led ..... this is a basic soft brick because he flashed incompatible kernel which failed bootloader test and hence he is getting this red led .... hard brick = phone becomes paperweight with no led or anything working ....... even charging which does in his case ....... he is just unable to turn on flashmode , (typical case with new users), even i also flashed wrong kernel on my xgo (u cannot even remove battery in that) , i just waited for red led to shut down then holding volume down and then plugging in usb i was able to get flashmode
suyash691 said:
its not hard brick ... in hard brick you don't even get to see the red led ..... this is a basic soft brick because he flashed incompatible kernel which failed bootloader test and hence he is getting this red led .... hard brick = phone becomes paperweight with no led or anything working ....... even charging which does in his case ....... he is just unable to turn on flashmode , (typical case with new users), even i also flashed wrong kernel on my xgo (u cannot even remove battery in that) , i just waited for red led to shut down then holding volume down and then plugging in usb i was able to get flashmode
Click to expand...
Click to collapse
Please elaborate how I can get in flasmode if my pc doesn't detects the phone when I am pluggin in it USB with the down volume pressed.I have all fastboot/flashtool drivers installed latest versions.Anymore solutions?I did managed to get in flash mode before when I updated my phone from 6.2.A.0.400 to 6.2.A.1.100 through flashtool.
DeusEx211 said:
Please elaborate how I can get in flasmode if my pc doesn't detects the phone when I am pluggin in it USB with the down volume pressed.I have all fastboot/flashtool drivers installed latest versions.Anymore solutions?I did managed to get in flash mode before when I updated my phone from 6.2.A.0.400 to 6.2.A.1.100 through flashtool.
Click to expand...
Click to collapse
first remove battery cable for 3-5 mins then reconnect it ...... don't touch the power button ... hold the volume button down.. while holding it down insert usb cable .... (give it 2-6 seconds and DONT LEAVE THE VOLUME DOWN BUTTON )the led should now turn on and glow green (flashmode enabled , u shud know the rest i think) don't check if pc detecting or not just check LED green or not first
suyash691 said:
first remove battery cable for 3-5 mins then reconnect it ...... don't touch the power button ... hold the volume button down.. while holding it down insert usb cable .... (give it 2-6 seconds and DONT LEAVE THE VOLUME DOWN BUTTON )the led should now turn on and glow green (flashmode enabled , u shud know the rest i think) don't check if pc detecting or not just check LED green or not first
Click to expand...
Click to collapse
I followed your instructions to the letter even I tried it twice to be sure I did followed it them right.Only red led appears.It seems the phone wont accept any commands given.Ok next solution.
DeusEx211 said:
I followed your instructions to the letter even I tried it twice to be sure I did followed it them right.Only red led appears.It seems the phone wont accept any commands given.Ok next solution.
Click to expand...
Click to collapse
Go to sony center and say that you just turned on the phone after a while and it was like this (and keep ur fingers crossed ) .... Seriously this sometimes works
suyash691 said:
Go to sony center and say that you just turned on the phone after a while and it was like this (and keep ur fingers crossed ) .... Seriously this sometimes works
Click to expand...
Click to collapse
I don't have anymore warranty left.So I think they will charge me for this.Maybe if I will let the phone more time in charger or with the bat cord detached/unplugged from charger/pc and after that trying again?
DeusEx211 said:
I don't have anymore warranty left.So I think they will charge me for this.Maybe if I will let the phone more time in charger or with the bat cord detached/unplugged from charger/pc and after that trying again?
Click to expand...
Click to collapse
if you can try using those "butterfly chargers" , the ones which directly charge battery..... then try this approach cuz flashmode needs 30% battery minimum to run , 75% is recommended
suyash691 said:
if you can try using those "butterfly chargers" , the ones which directly charge battery..... then try this approach cuz flashmode needs 30% battery minimum to run , 75% is recommended
Click to expand...
Click to collapse
Can you elaborate what are that butterfly chargers?And were I can find something like this as the battery cord is different.
I was using JB rom on my xperia u and then i flashed orignal ics ftf then on first boot at xperia logo it turned off and not turning on when i connect to pc it doesnt detect and i am unable to go to flashmode or fastboot mode and whenever i plug it in for charge the red light that indicates charging turns on but turns off after a while.
PS i already charged it for 20+ hours any solution to get it back guys ???
alexisgepps said:
I was using JB rom on my xperia u and then i flashed orignal ics ftf then on first boot at xperia logo it turned off and not turning on when i connect to pc it doesnt detect and i am unable to go to flashmode or fastboot mode and whenever i plug it in for charge the red light that indicates charging turns on but turns off after a while.
PS i already charged it for 20+ hours any solution to get it back guys ???
Click to expand...
Click to collapse
flash ics firmware again
and say what happens
Are you sure your device is off when you're connecting it to your computer? Press and hold volume up button with powerbutton untill you've felt a vibration followed by a serie of vibrations and then try to connect it in flashmode.
must be the kernel or rom you flashed doesn't support offline charging
bharathbondfire said:
flash ics firmware again
and say what happens
Click to expand...
Click to collapse
It is not going in flash mode or fastboot mode as its not detected by pc
Biodegradable said:
must be the kernel or rom you flashed doesn't support offline charging
Click to expand...
Click to collapse
so waht to do
alexisgepps said:
so waht to do
Click to expand...
Click to collapse
do a hard reset like till u get three vibrations ... hold volume down and plug in usb .. if the led goes green that means u have entered flashmode
suyash691 said:
do a hard reset like till u get three vibrations ... hold volume down and plug in usb .. if the led goes green that means u have entered flashmode
Click to expand...
Click to collapse
How to do hard reset ??
alexisgepps said:
How to do hard reset ??
Click to expand...
Click to collapse
volume up +power button till you get three vibrations in succession ... first u will get one vibration then three in quick succession then release both keys
Hey I really need your help, I flashed the wrong boot img and now my Xperia go just shows a red led light if plugged in but it doesn't charge and I can't get in fastboot mode, it just stays black if I start it.can someone please help me ?
Have you tried going into flashmode?
Sent from my LT22i using Tapatalk
If flashmode is volume up and power key then yes, it doesn't work
If i get into fastboot/flash mode i just stays there for a couple of seconds anybody knows what to do ?
trickser18 said:
If i get into fastboot/flash mode i just stays there for a couple of seconds anybody knows what to do ?
Click to expand...
Click to collapse
boot.img is actually contains kernel in it...Just flash stock boot.img and it might work...
Thanks for the reply, is there any way how I can flash the new kernel since Fastboot/Flashmode won't work for me
trickser18 said:
Hey I really need your help, I flashed the wrong boot img and now my Xperia go just shows a red led light if plugged in but it doesn't charge and I can't get in fastboot mode, it just stays black if I start it.can someone please help me ?
Click to expand...
Click to collapse
if you are not able to get into the flashode...
then when you start the phone just try to go in the cwm recovry....
and flash the flashble zip from sd card....
i dont if this will work or not ..
but just give a try....
Hello peeps
I have rooted neo v with unlocked bootloader
I flashed with some jelly bean and kk roms.
I dont know how my phone is completly dead now
I flashed stock ttf from flash tool. In the last flash completed and phone conected with usb denugging off in pc.
( how do i turn on usb debugging in dead phone)
But when i turn on phone it just vibrate and nothing appear on screen. Screen keeps always black. Some time when i press volume key it give me sound.
Flash mode and fastboot mode working.
Pls help me friends.
arshad522 said:
Hello peeps
I have rooted neo v with unlocked bootloader
I flashed with some jelly bean and kk roms.
I dont know how my phone is completly dead now
I flashed stock ttf from flash tool. In the last flash completed and phone conected with usb denugging off in pc.
( how do i turn on usb debugging in dead phone)
But when i turn on phone it just vibrate and nothing appear on screen. Screen keeps always black. Some time when i press volume key it give me sound.
Flash mode and fastboot mode working.
Pls help me friends.
Click to expand...
Click to collapse
Your flash tool is able to detect your phone? Just open flash tool and then remove the battery of the phone ,reinsert it and hold your menu button while you connect to the PC. (you will see green LED glowing). It will turn on the flash mode and flash the stock ICS ftf file .. I think it should work.
AnDrOiDnEoV said:
Your flash tool is able to detect your phone? Just open flash tool and then remove the battery of the phone ,reinsert it and hold your menu button while you connect to the PC. (you will see green LED glowing). It will turn on the flash mode and flash the stock ICS ftf file .. I think it should work.
Click to expand...
Click to collapse
i flashed stock ftf ginger bread and stock ftf ics.
flash succesful but when i power on my phone it just vibrate and screen keeps black nothing appear on the screen
what to do .
arshad522 said:
i flashed stock ftf ginger bread and stock ftf ics.
flash succesful but when i power on my phone it just vibrate and screen keeps black nothing appear on the screen
what to do .
Click to expand...
Click to collapse
Are you able to charge the battery?
nEO bRICKED
AnDrOiDnEoV said:
Are you able to charge the battery?
Click to expand...
Click to collapse
Exact same problem except for a disturbing fact that I am unable to flash the stock rom as well . Completely dead. Green light lits , Blue light lits and thats about it . Can I revive my phone ? Please help
Thanks already
AnDrOiDnEoV said:
Are you able to charge the battery?
Click to expand...
Click to collapse
yes i can charge the battery.
seems my screen is gone but not sure what is the real problem.
can it be fixed from setools ?