[Q] Who can help unbrick a pre-release LGOG? - AT&T LG Optimus G

So I have an AT&T LG Optimus G (E970). However, I found out that it's pre-release hardware (yes, it says "nOt foR sale***" on the side of the phone, but it was in a case), and I've bricked it trying to root it the standard way (using LGNPST), and it now boot loops 3 times before displaying "Security Error" under the LG logo. I can't get it back into download mode, nor does a factory hard reset (the only mode I can get it into) work.
A bit of background info:
The original firmware was E97009j. It was unable to download the OTA JB update. I tried to install that stock update through LGNPST since the phone couldn't be seen through ADB. From there I planned on rooting and everything else. Yes, I should have never tried messing with pre-release hardware, but in theory, since it was a review unit, the hardware itself should've been identical to what is sold in stores. Also, and more importantly, I didn't realize it was pre-release until after I bricked it.
Luckily this isn't my daily phone, but I'd like to get it fixed...

Possible way to get back into download mode.
Start with phone unplugged, and when it gets stuck on security error hold power button for 10 seconds to force reboot.
Then at very instant it powers off, but before it powers on hold volume up + volume down + power and plug in USB.
If you are able to get into download flash the teenybin alt. with lgnpst.

adfurgerson said:
Possible way to get back into download mode.
Start with phone unplugged, and when it gets stuck on security error hold power button for 10 seconds to force reboot.
Then at very instant it powers off, but before it powers on hold volume up + volume down + power and plug in USB.
If you are able to get into download flash the teenybin alt. with lgnpst.
Click to expand...
Click to collapse
So that partially got me fixed. I was able to finally get it into download mode after trying your method about 4 times, and I did the teenybin deal. The "regular" teenybin didn't fix it, though it allowed it into download mode the proper way without trying more than once. I then did the alt teenybin, and when it rebooted, it showed a Google logo (instead of LG) with an unlocked icon at the bottom of the screen for about a second before the screen went black. Now I can't get it to turn on at all, though it could just need to be charged. When I plug it in, it shows a white battery icon with a lightning bolt for about 4 seconds before turning back off. I'll let it sit on the charger undisturbed for an hour or so and see what I can do then. As it stands right now, it won't go back into download mode or factory hard reset mode.
Out of curiosity, since I've flashed teenybin, my bootloader should be unlocked and I should have a recovery I can flash zips from now, right? I shouldn't have to jump through any more hoops with LGNPST or anything?
EDIT:
Um, this phone will charge even in this state, right? The LED on the power button isn't lighting up, and I can only sometimes get it to show that battery icon...

YES!!!
I'm into recovery now! I'm going to flash CM10.1 and report back!
EDIT:
I'm up and running now, though WiFi isn't working, nor is my earpiece on the phone. Though, the earpiece was an issue before I borked everything, so I'm pretty sure that's a broken bit of hardware there.
THANK YOU SO MUCH!

chrisliphart said:
I'm into recovery now! I'm going to flash CM10.1 and report back!
EDIT:
I'm up and running now, though WiFi isn't working, nor is my earpiece on the phone. Though, the earpiece was an issue before I borked everything, so I'm pretty sure that's a broken bit of hardware there.
THANK YOU SO MUCH!
Click to expand...
Click to collapse
I am glad you got it fixed! Setting WiFi to 2.4 GHz only may work.

adfurgerson said:
I am glad you got it fixed! Setting WiFi to 2.4 GHz only may work.
Click to expand...
Click to collapse
Wifi works under the stock AT&T JB firmware. Not sure why it didn't work under CM10.1 (it couldn't initialize it), but I'm good now. Thanks!

It may have been a radio issue, ROM zips don't include them. Teenybin would not have changed radio either, so you would still have had ICS radio.

adfurgerson said:
It may have been a radio issue, ROM zips don't include them. Teenybin would not have changed radio either, so you would still have had ICS radio.
Click to expand...
Click to collapse
Ah, that makes total sense. I just got everything setup and signed in on this ROM, so I'm running a Titanium Backup now. I'll switch ROMs and see what happens. Thanks so much for your help.
EDIT:
Yep, that did it. I didn't think to update the radios. I can't thank you enough, man. Aside from the earpiece issue (and I can just use a BT headset to get around it until I decide to pay to get it fixed), it's purring along now.
Sent from my LG-E970 using xda premium

chrisliphart said:
Ah, that makes total sense. I just got everything setup and signed in on this ROM, so I'm running a Titanium Backup now. I'll switch ROMs and see what happens. Thanks so much for your help.
EDIT:
Yep, that did it. I didn't think to update the radios. I can't thank you enough, man. Aside from the earpiece issue (and I can just use a BT headset to get around it until I decide to pay to get it fixed), it's purring along now.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
Nice, glad you got it fixed. And thanks to adfurgerson for the assist.
Sent from my Nexus 7 using xda app-developers app

TangoXray said:
Nice, glad you got it fixed. And thanks to adfurgerson for the assist.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Autoprime explained how to get into download to me on irc, I just relayed the answer. I was glad to help after having a hand in bricking it.

adfurgerson said:
Autoprime explained how to get into download to me on irc, I just relayed the answer. I was glad to help after having a hand in bricking it.
Click to expand...
Click to collapse
Haha, it wasn't you who bricked it; it was me. Really, I should've just done TeenyBin when I first got it into download mode through LGNPST instead of trying to install a stock ROM to root. It really was a backwards way for me to accomplish what I wanted. You'd think that since I've had like 10 Android devices, all rooted and modded, I'd know better. lol

http://forum.xda-developers.com/showpost.php?p=41415103&postcount=248 It all worked out in the end.
chrisliphart said:
Haha, it wasn't you who bricked it; it was me. Really, I should've just done TeenyBin when I first got it into download mode through LGNPST instead of trying to install a stock ROM to root. It really was a backwards way for me to accomplish what I wanted. You'd think that since I've had like 10 Android devices, all rooted and modded, I'd know better. lol
Click to expand...
Click to collapse

Related

[Q] Vibrant will not start up after ODIN

I was following the guide here:
http://forum.xda-developers.com/showthread.php?t=853950
And everything perfectly, but when I had to boot into recovery mode, the phone would not start up, at all. No combination of buttons works. I tried taking out the battery and still no luck. I've read up and down multiple threads here and nothing is working. This seems really difficult and I would much rather avoid bringing the phone back. None of the buttons are responsive... so I can't start it up. Any suggestions?
oirsx2 said:
I was following the guide here:
http://forum.xda-developers.com/showthread.php?t=853950
And everything perfectly, but when I had to boot into recovery mode, the phone would not start up, at all. No combination of buttons works. I tried taking out the battery and still no luck. I've read up and down multiple threads here and nothing is working. This seems really difficult and I would much rather avoid bringing the phone back. None of the buttons are responsive... so I can't start it up. Any suggestions?
Click to expand...
Click to collapse
You tried flashing the wrong rom. That rom is for a bell i9000. I believe its a canadian version or whatnot. You need to odin back to the stock VIBRANT rom then start all over.
Sent from my SGH-T959 using XDA App
Oh wow. Thanks man. Now I know the source of this problem. Can you tell me then how to go about doing that? Or rather, how can I even go flashing anything when my phone won't even start up...
oirsx2 said:
Oh wow. Thanks man. Now I know the source of this problem. Can you tell me then how to go about doing that? Or rather, how can I even go flashing anything when my phone won't even start up...
Click to expand...
Click to collapse
You need to download the stock rom JFD.tar file and 512.pit file and odin back.
Sent from my SGH-T959 using XDA App
Call me ignorant, but how do I go about applying any of those you mentioned, if my phone won't even start up? as in, it won't start up... i press power, nothing happens. just nothing...
oirsx2 said:
Call me ignorant, but how do I go about applying any of those you mentioned, if my phone won't even start up? as in, it won't start up... i press power, nothing happens. just nothing...
Click to expand...
Click to collapse
Can you get into download mode. If so that's how.
Sent from my SGH-T959 using XDA App
jrod33084 said:
Can you get into download mode. If so that's how.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I actually can't. I wish I could. But I can't. The only option is making a jig, I think... but even some threads are saying it won't help in my case. So I'm not sure.
Jig won't help you at all because your phone won't turn on. Even when you charge it?
oirsx2 said:
I actually can't. I wish I could. But I can't. The only option is making a jig, I think... but even some threads are saying it won't help in my case. So I'm not sure.
Click to expand...
Click to collapse
Holding both volume up and down buttons then plugging in usb doesn't work?
Sent from my SGH-T959 using XDA App
None of the aforementioned methods worked. I'm gonna try to get it replaced. And hopefully next time I flash it, I'll read if it's the right version i'm flashing. Thanks for the help. A mod can resolve this.
I'm in the same boat as you......I did the exact same thing and now I'm screwed as well...
Did you get it fixed or are you going to try and get a new one?
The same thing happened to my phone. The really weird part is that my phone was updated using kies mini and not some hax rom or anything. Now i can't do anything to turn it back on.

[Q] Is my Vibrant dead?

Greetings everyone. Reader for a while, but this is my first post, and unfortunately it's because I'm quite sure I should be preparing a burial plot for my phone unless someone can help.
Here's the situation:
I installed the Cyanogen Mod beta on my Vibrant and it was pretty cool, but I couldn't get passed the gps and video recording (I was warned, I know, but I wanted to try it anyway). This was not the first rom I had flashed, and was familiar with CWM and ODIN, so this was not a problem for me. I wanted to have something working so I decided to go back to the DeOdexed JL5 rom, which I was running before, so I went into ODIN to restore back to stock before flashing, and it hung up after clicking repartition. I pulled the battery on my phone, and when I went to put it into Download mode again, it wouldn't go into it. Hell, it wouldn't do anything.
How totally screwed am I?
the phone won't turn on?
try plugging first the usb then hold the volume buttons then put back the battery.
That would put it in Download mode. It won't go into that.
you can't put it into download mode?
Nope... =/
sharkethicx said:
Nope... =/
Click to expand...
Click to collapse
did u take the sim and ex sd card out, than repeat?
ZachLL88 said:
did u take the sim and ex sd card out, than repeat?
Click to expand...
Click to collapse
Yeah. Always did before I tried putting it in download mode out of some (probably irrational) fear that they would get wiped as well
There have been a handful of others recently who have had their vibrants in the state where they aren't booting, aren't even showing a charging icon when plugged in. Persistence is the key. The steps posted by iynfynity do work, even from your current state, according to the individuals who have found themselves in the same state lately, no power, phone doesn't respond to anything. You can find these posts around these forums here at xda. Keep trying, if you get frustrated, walk away for a little bit and try again later.
-Remove battery and all cards, have odin open, files loaded and ready to go.
-Plug in usb, holding both volume, pop the battery in
Again, persistence is the key, and a little patience doesn't hurt either.
I can vouch for that... I always used the 3 button combo and had this happen. I tried everything. I even have a replacement sitting here still in the box not opened. I tried 1 more time with just pulling the battery sim and sd card out, plugging in the usb to pc, held down just the volume buttons, plugged in usb to phone, put the battery in and right to download mode.
I'm keeping my old phone and sending the replacement back..This one just won't die... : )
Thank you, you lovely gentlemen. Persistence and patience was key. I'd pretty much given up all hope on it once I plugged it in and it wouldn't even pop up with the battery charge indicator.
I wish I was more patient because I already bought a Captivate, rooted, unlocked, ROMed it. Oh well at least now I have a backup phone.
Glad you got it back up at least. Hopefully your captivate wont start shutting itself off when your battery gets below 85%, as many others are plagued with, if it does though, you have your backup.
Ginger Clone's of the World Unite! Via the XDA App
did it worked?
Sent from my SGH-T959 using XDA App
iynfynity said:
did it worked?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yes it did =) and for now, I'm using my Captivate as my PMP. I loaded my music on there and I'll keep my games on there as well to save room on my Vibrant. Guess I got the Galaxy Player early

My home button has stopped working

I've had my atrix for a week now and it has been working fine. A couple of days ago I put gingerbread on it.
This morning, however, I unlocked the sim. It was previously locked to orange. Now it seems as though my home button does naught. Whenever I press it it vibrates but does nothing. The rest of the buttons work fine.
I have tried rebooting the phone to no avail. Any help would be appreciated. Thanks.
Sent from my MB860 using XDA App
My lockscreen has dissapeared now.
How did you get Gingerbread? Did you install it by modding (root, unlocked BL, etc) or was it by official means (OTA)?
If you installed it yourself through recovery you might need to try it again, doing the proper wipes of course. If you got the update as an Official OTA then you might need to do a factory data reset.
felleese said:
I've had my atrix for a week now and it has been working fine. A couple of days ago I put gingerbread on it.
This morning, however, I unlocked the sim. It was previously locked to orange. Now it seems as though my home button does naught. Whenever I press it it vibrates but does nothing. The rest of the buttons work fine.
I have tried rebooting the phone to no avail. Any help would be appreciated. Thanks.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I followed this to the letter.
However my home button and lockscreen are both working now. But webtop and the entertainment mode are not.
I wish I knew more about that version, unfortunately, I have an AT&T version. Which recovery are you using?
felleese said:
I followed this to the letter.
However my home button and lockscreen are both working now. But webtop and the entertainment mode are not.
Click to expand...
Click to collapse
LOL. This phone seems to be healing itself. Now everything is working fine. Thanks live4nyy
Good to hear.
felleese said:
LOL. This phone seems to be healing itself. Now everything is working fine. Thanks live4nyy
Click to expand...
Click to collapse
sorry to resurrect this, but my friend is having the same issue with his atrix.
he's not rooted nor does he have an unlocked bootloader.
and actually, he's on 2.2.1.
i did a factory reset on his phone by holding the power + volume down buttons and doing it through there.
there's no lockscreen and there's no effect when hitting the home button. there is vibration when touched, but no action on the screen. any ideas? maybe i'll just force the most recent update that came out.
i'm thinking maybe i'll root it and unlock it for him and flash a ROM or something...? he's not fond of doing that because... well, i guess he's not that into trying his hand at hacking his phone.
...i'm going to keep a tight hold on my own atrix... just in case he decides to switch them out...
but yeah. any ideas/suggestions would be greatly appreciated. thanks, all.
Y i would try to update first via OTA if avilable so worst case senario it will brick the phone (it shouldnt) but then you can send it off for warrenty replace. but then again a custom ROM such as CM7 would also be a good try and make the phone a lot faster and more fun lol.
hm. just thought of something. since he's on 2.2.1, and the unlocking/rooting methods I see are for 2.3.4, how do I unlock/root his phone?
because if I update to the new 2.3.6 OTA, then I won't be able to unlock/root... correct?
You will be able to unlock it. Just keep reading is my best advice on that. Start at the top of the Development Thread and read it all. I felt kind of overwhelmed at first but now I have full confidence in flashing roms, entering scripts, etc.
abomb78 said:
You will be able to unlock it. Just keep reading is my best advice on that. Start at the top of the Development Thread and read it all. I felt kind of overwhelmed at first but now I have full confidence in flashing roms, entering scripts, etc.
Click to expand...
Click to collapse
yeah. well, I'll let him know that he better get to reading...!

Bricked my phone -_-

I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
That's exactly what I would do
Sent from my SAMSUNG-SGH-I717 using XDA App
if you can get into download mode try reflashing the stock recovery found in the dev section then if you can get that fair try flashing the odin stock rom to see if it will boot
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
BLOWNCO said:
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
Click to expand...
Click to collapse
If jig won't work, I'm pretty sure hardware button won't work either. It goes without saying that he probably already tried everything he could find.
edpsx said:
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
Click to expand...
Click to collapse
That's not guinea pig. He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
foxbat121 said:
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
Click to expand...
Click to collapse
Yeah I thought about doing that - worst case scenario they tell me I voided my warranty and give me the phone back and I can still try finding a jtag solution or do i have to face any other consequences including maybe never getting my phone back?
foxbat121 said:
He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
Click to expand...
Click to collapse
That's my guess too. I screwed up badly. I would like to blame it on the late hour I did all that but it was just overexcited stupidity -_-
Try your buttons...
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
brojoe11 said:
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
Click to expand...
Click to collapse
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
cilmeron said:
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
Click to expand...
Click to collapse
I know on some phones that download mode can still be activated even if the screen isn't working properly and displaying it. I know many infuse users ran into problems and were still able to use Odin to flash stock and fix their phone. Try doing the hardware method of getting into download mode, and even though your screen doesn't show anything, it may still connect to Odin and you could try to flash back to stock.
Sent from my SGH-I997 using xda premium
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
mintu123 said:
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
Click to expand...
Click to collapse
Actually, you can brick it to the point of needing JTAG repairs to restore your device. That being said, it's very very very hard to brick it. You have to do something like flash firmware for a completely wrong device and screw up your bootloaders in the process.
cilmeron said:
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Click to expand...
Click to collapse
I've read some so my suggestion is this:
First make sure that you have the drivers installed for your phone. Then pull the battery wait for a few seconds. press the down button and then the power to go in download mode and hold them pressed for 20s. Now plug in the USB and press the volume up button. If Odin detects it you're good to go! If not... Well it's worth a shot
My theory is that even though the screen is blank, the hardware still boots properly. Just make sure your battery is somewhat charged. And also plug in the USB AFTER you "boot" in download mode.
Sent from my SGH-I717R using xda premium
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Click to expand...
Click to collapse
Everything here screams 'you should never attempt to modify your device again.'
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Why don't you find Adam_Outler in the hardware hacking forum? Send your phone to him and he'll hopefully be able to create an unbrickable mod. Not only will you likely have a fixed phone but it will mean volumes for our community.
Note, you will be without a phone for a bit
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
ekerbuddyeker said:
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
It's not that, we've all made mistakes, but it's like this guy went out of his way to try to brick the phone. This isn't like "oh crap, I flashed the wrong radio"
He tried to flash a ROM from a different SoC and every fail-safe wouldn't let him do it. I'm surprised at how well the different programs tried to save his phone, then he actually went ADB and forced it onto his phone and then he unplugs during a flash.
It's like he drove his car without paying attention and hit a fence that prevents you from flying off a cliff, then he kept ramming his car into the fence, then took some C4, blew up the fence, drove off the cliff, then started yelling "help, I fell off the cliff"
N3RD420 said:
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
I'm confused, is there a CDMA Note? What do you mean "they won't know it's GSM"?

[Q] Note i717 Stuck On Samsung Logo NEED FIX

I know someone will eventually tell me to do a search, but I have and can't make any sense of most of the so called guides. What I have been finding is for the international version, or some generic crap that don't really help me. My phone is stuck on the Samsung logo when you try and power it on. I really need to fix this!!! I did SIM unlock it, rooted it, and installed OnlyOne ICS because I got tired of waiting for slow a$$ ATT to get the ICS update out. Anyhow, the phone worked great for 2 months and now this morning it kept saying, blah blah has crashed, etc. So I rebooted the phone and lord behold, the stupid thing won't work anymore. The only thing I can do with it is hold the power button and down volume button to get to the "Odin Mode". Other then that, the phone is useless. I would love to find some guide that is more specific on fixing this problem? Maybe I over looked one, but I am at work and don't have the time to search thru hundreds of threads, etc. I will when I get home, but really need to fix the phone ASAP since I use it for work too. Any info would be awesome.
I think your talking about Download mode.
http://forum.xda-developers.com/showthread.php?p=2725944
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
kcraptor82 said:
I know someone will eventually tell me to do a search, but I have and can't make any sense of most of the so called guides. What I have been finding is for the international version, or some generic crap that don't really help me. My phone is stuck on the Samsung logo when you try and power it on. I really need to fix this!!! I did SIM unlock it, rooted it, and installed OnlyOne ICS because I got tired of waiting for slow a$$ ATT to get the ICS update out. Anyhow, the phone worked great for 2 months and now this morning it kept saying, blah blah has crashed, etc. So I rebooted the phone and lord behold, the stupid thing won't work anymore. The only thing I can do with it is hold the power button and down volume button to get to the "Odin Mode". Other then that, the phone is useless. I would love to find some guide that is more specific on fixing this problem? Maybe I over looked one, but I am at work and don't have the time to search thru hundreds of threads, etc. I will when I get home, but really need to fix the phone ASAP since I use it for work too. Any info would be awesome.
Click to expand...
Click to collapse
If you can get into download mode (odin mode) just flash the attstock Rom to unroot.
Go to rootgalaxynote.com and click the upper right hand corner where it says uroot and follow the directions. Works great for me used it multiple times.
Sent from my SAMSUNG-SGH-I717 using xda premium
I do appreciate the quick responses, but I'm about to head out and will try to re-flash it later. I am just concerned about the data / pictures, etc I have on the phone itself. I know I can pull the 16gb sd card I have and it will be safe, but if I use the ODIN way to re-flash to stock, will it erase all my content I have? I thank god I have a MyTouch 4g as a backup, but all my work related stuff is on my Note, so I am really up a creek right now without it.
kcraptor82 said:
I do appreciate the quick responses, but I'm about to head out and will try to re-flash it later. I am just concerned about the data / pictures, etc I have on the phone itself. I know I can pull the 16gb sd card I have and it will be safe, but if I use the ODIN way to re-flash to stock, will it erase all my content I have? I thank god I have a MyTouch 4g as a backup, but all my work related stuff is on my Note, so I am really up a creek right now without it.
Click to expand...
Click to collapse
If you unroot all of the data stays on your note. No worries. Good luck
Just one thing, when you unroot and it is finished the att logo will come up with the "rethink possible" after that just go into Samsung recovery and reboot from there.
It doesn't say that on the website.
Sent from my SAMSUNG-SGH-I717 using xda premium
I got it to work when I got some time. I used a Wi-Fi connection at MacDonalds and downloaded the onlyone beta 5 rom. Thank god I had my laptop with me also. I was on beta 4 but I also got into clockwork mod and fixed permissions & cleared cache. Then went and flashed the new rom, hoping my data and installed apps would still work. Well my phone is working great again. Thanks for the info and keep up the good work!
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Can you put solved in the title please? : )
And quite happy for your success.

Categories

Resources