Hey guys, did a bit of searching, found some similar issues, but no fixes or anything.
My HTC one cannot send or receive any mms messages or group messages, I always get an error after some time saying "generic network failure"
I get a poor signal on lte, around -91dBm. I tried switching to gsm only from lte. It worked until I rebooted my phone, it reverted back to lte.
This happened on stock, before I even rooted or unlocked the boot loader, as well as any roms I've tried.
My current rom, clean rom 2.0, doesn't have the option under mobile data in settings to even switch network modes. I installed an app called phone info to switch to gsm only, but it didn't fix the issue, and reverted back to lte on reboot.
Anyone have anything to offer on a possible fix? I've tried multiple roms with the same result. Could something be wrong with my radio?
Thanks!
Sent from my HTC One using Tapatalk 2
Just an update, I've got 4 bars, yet my signal seems pretty weak at -93 dBm. I should still be able to send/receive mms with a weak signal, correct?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC One using Tapatalk 2
Check your apn settings:
Name: ATT PTA
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri
eagercrow said:
Check your apn settings:
Name: ATT PTA
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri
Click to expand...
Click to collapse
Did your stock ROM come with the pta APN? Mine came with "phone". I thought pta was being phased out. The wife's new AT&T Galaxy S4 came with the phone apn also.
Sent from my HTC One using xda premium
Yeah mine also has the phone apn, nothing else. I tried creating a new one with the settings posted above, but when I saved it, it's nowhere to be found
Sent from my HTC One using Tapatalk 2
henrybravo said:
Did your stock ROM come with the pta APN? Mine came with "phone". I thought pta was being phased out. The wife's new AT&T Galaxy S4 came with the phone apn also.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I don't know what it came with stock, what you name it doesn't matter, it's just a name. The settings are what count. These are the settings I always use when the ROM I'm using doesn't have the apn set.
eagercrow said:
I don't know what it came with stock, what you name it doesn't matter, it's just a name. The settings are what count. These are the settings I always use when the ROM I'm using doesn't have the apn set.
Click to expand...
Click to collapse
I'm not referring to the name field, I'm referring to the APN field. The stock APN on their 2 newest LTE phones (HTC One and Galaxy S4) is using phone instead of pta.
Name: ATT Phone
APN: phone
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,admin,fota,mms,supl,hipri
admin and fota (firmware over the air) aren't needed for custom ROMs since we don't need or want AT&T administering our phones or pushing updates to us. Name is irrelevant as you said. pta works fine though for now.
Related
My First Guide!
Flashable Zips at the bottom!
Okay, so i have seen a post claiming to fix the APN settings, however this is the only true one i have found (credits to shoman for these, i picked them out of his rom!).
it is pretty self explanatory, any field that requires you to put something in it has something in it, otherwise it has a -. underlined means that it is a new apn (settings->more->mobile networks->access point names->"menu" button->new apn)
MAKE SURE YOU SAVE THEM!!
Code:
Name: [U]ATT MMS[/U]
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: -
Password: -
Server: -
MMSC: http://mmsc.cingular.com/
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: -
APN Type: mms,supl
APN Protocol: ipv4
Name: [U]ATT PHONE[/U]
APN: phone
Proxy: -
Port: -
Username: -
Password: -
Server: -
MMSC: -
MMS Proxy: -
MMS Port: -
MCC: 310
MNC: 410
Authentication Type: -
APN Type: default,internet
APN Protocol: ipv4
then, once all of these have been entered, make sure that the one labeled "ATT PHONE" has the tick to the right of the name filled in (this is your default!) reply with any questions and i will try my best to help!
MIUI currently will not send MMS with these settings. Looking for a solution!
EDIT: Some ROMs require you to flash your modem manually!
-->click here for modem links<--
There's a typo in your MMS settings. The MMSC should read http://mmsc.cingular.com.
MacAlert said:
There's a typo in your MMS settings. The MMSC should read http://mmsc.cingular.com.
Click to expand...
Click to collapse
good eye, thanks, the sad thing is i actually corrected that once before...
Yeah these settings really do work, I was averaging 3-4 mbps download before with the old settings and now its a constant 5-7 mbps in Merrimack NH
Sent from my SGH-I777 using XDA
I'm assuming this is for ICS? I'm on a stock rom and don't have the option to add anything under APN. ):
MattMJB0188 said:
I'm assuming this is for ICS? I'm on a stock rom and don't have the option to add anything under APN. ):
Click to expand...
Click to collapse
yes it is, and are you sure? go under your settings to more (should be under data usage) -> mobile networks -> access point names.
sykoj82 said:
Yeah these settings really do work, I was averaging 3-4 mbps download before with the old settings and now its a constant 5-7 mbps in Merrimack NH
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
glad that they helped!
Ghstudent said:
yes it is, and are you sure? go under your settings to more (should be under data usage) -> mobile networks -> access point names.
Click to expand...
Click to collapse
Yea, Gingerbread must be different. That's ok because what ever APN settings Ryude is using in UnOriginal works just fine. Though coming from an iPhone 4s, data speeds on the GSII are faster when your closer to the tower. I was able to get faster speeds with 2-3 bars on the 4s. Oh well. Uploads speeds don't seem as great on the GSII. With the 4s I could get 7 down and 4 up. See my attachment for GSII results.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Tweakker, run, enjoy. For CM7 folks, this fixes the default APN setting.
CM7.2
UCKJ4
SIYAH 2.6.14
ExTweaks, Tweakker
Sent from my SGH-I777 using XDA
Working OK in Dallas
Thanks for the TIP! This is working well in Dallas, TX area.
Seems to be working for me in Wisconsin - tomorrow at work will be the real test.
worked for me....so far.
before:
after:
It looks like you have spaces inserted between the APN types after the commas??? Is that correct? All other APN setups that I have seen say "Don't Use Spaces"
Just want to verify before I try it.
Thanks
"default, supl, agps, fota, dun, hipri, internet"? I can only choose one at a time in my APN Type settings (radio button selection), and not all of these are even choices...what am I missing?
i do not know what your problem is in the rom, if nothing else make just use all taht are available
dschreiber69 said:
It looks like you have spaces inserted between the APN types after the commas??? Is that correct? All other APN setups that I have seen say "Don't Use Spaces"
Just want to verify before I try it.
Thanks
Click to expand...
Click to collapse
some people say dont, but i do just for the sake of management and haven't noticed any change yet
where's the date on these posts. please tell me this isn't news to anyone.....
Sent from my SAMSUNG-SGH-I777 using XDA
yoyochuckd said:
where's the date on these posts. please tell me this isn't news to anyone.....
Sent from my SAMSUNG-SGH-I777 using XDA
Click to expand...
Click to collapse
It's right next to your username. And while it may not be "news", it was new to me in this (i777) forum. And I found it helpful.
MattMJB0188 said:
Yea, Gingerbread must be different. That's ok because what ever APN settings Ryude is using in UnOriginal works just fine. /QUOTE]
Im on stock gb. You can create a new apn. Press the menu button when your in the access point name menu
Click to expand...
Click to collapse
j510 said:
MattMJB0188 said:
Yea, Gingerbread must be different. That's ok because what ever APN settings Ryude is using in UnOriginal works just fine. /QUOTE]
Im on stock gb. You can create a new apn. Press the menu button when your in the access point name menu
Click to expand...
Click to collapse
I aimed this guide at those who were unable to break a 1mb/s barrier on a custom rom. You are more than welcome to use this guide but I do not know how much your speed will differ from this
Click to expand...
Click to collapse
How many times have you given your 12 year old a smart phone with data disabled, only to then get the complaints that they can't send or receive MMS. This is how to configure APNs for MMS only, and great for people that don't have a data plan (kids). Note: Data has to be enabled but the phone will be mis-configured, therefore will never use any. All data connection attempts will fail except mms.
I have fully tested this on at&t. An equivalent config for other providers will work. Simply, break the part that makes data work.
Instructions: Create the following two APNs. If a value is not specified, do not configure it.
Step 1 Create broken data APN
Name: Dummy APN
APN: dummy
MMS port: 80
MNC: 410
APN type: default,supl,internet <-- exactly as typed no spaces
(remember to hit lower left menu, save)
Step 2 Create working MMS APN
Name: ATT MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: default,supl,mms <-- exactly as typed no spaces
(remember to hit lower left menu, save)
Step 3. Select broken APN as active
Now that the above are configured, select Dummy APN as the active APN.
Step 4. Enable data.
THE END
The result will be that data will not function. Sending and receiving MMS will function.
In this config, setting the phone to 2G is feasible, as data transfer speed is no longer a priority and 2G will yield far better battery life than 3G
Optional: If you have a situation that requires data, you can toggle over to the APN called ATT Data, below. In all cases android Data remains enabled, and using the APN toggle method determines if the phone will use data. MMS continues to work in all scenarios. At no point do you select the ATT MMS APN. The phone 'find's the APN with type mms, whenever it needs to send or receive a MMS message.
Optional Step 5:
Name: ATT Data
APN: wap.cingular
MMS port: 80
MNC: 410
APN type: default,supl,internet <-- exactly as typed no spaces
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my MB860 using Tapatalk 2
I've just one question. How do you get around the "a data plan is required for this phone" that att makes you get?
pre4speed said:
I've just one question. How do you get around the "a data plan is required for this phone" that att makes you get?
Click to expand...
Click to collapse
You don't. This is for people that don't buy a smart phone from at&t, but a hand-me-down or one from ebay.
This gives you the technical method to ensure you don't use billable data on an Android phone, like when you swap your kid's sim into their first smart phone and still want MMS to work (requires data be enabled)
jjwatmyself said:
You don't. This is for people that don't buy a smart phone from at&t, but a hand-me-down or one from ebay.
This gives you the technical method to ensure you don't use billable data on an Android phone, like when you swap your kid's sim into their first smart phone and still want MMS to work (requires data be enabled)
Click to expand...
Click to collapse
Ah. So I bought a phone off ebay, if I put a sim from a dumb phone in it, I can set up this and wont get that txt from att saying they detected the use of a smartphone on the line and theyre adding a required data plan to the account?
pre4speed said:
Ah. So I bought a phone off ebay, if I put a sim from a dumb phone in it, I can set up this and wont get that txt from att saying they detected the use of a smartphone on the line and theyre adding a required data plan to the account?
Click to expand...
Click to collapse
They definitely do that for iphones. I don't know if they do that with Android or BlackBerry phones. Do you have info that indicates they do?
Sent from my MB860 using Tapatalk 2
jjwatmyself said:
They definitely do that for iphones. I don't know if they do that with Android or BlackBerry phones. Do you have info that indicates they do?
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I put a dumb phone sim in my old backflip about a yr ago and within an hour got a txt saying that. Was no problem calling and telling them it wasnt a permanent thing but they did add the highest data plan automatically. And they did this without the phone using any data at all. It was on wifi only, data disabled.
Hi:
This is great information, and has been very useful to me.
I have an odd question, does anyone know of a method like this for iphone?
I still have my gs3, and love it, but mom has an iphone that she would like to use for mms, but no data.
Ihave been searching everywhere, any help would really be appreciated.
Thanks!
cincy1020 said:
Hi:
This is great information, and has been very useful to me.
I have an odd question, does anyone know of a method like this for iphone?
I still have my gs3, and love it, but mom has an iphone that she would like to use for mms, but no data.
Ihave been searching everywhere, any help would really be appreciated.
Thanks!
Click to expand...
Click to collapse
I don't know if it's possible or not.
Sent from my MB860 using Tapatalk 2
It would be more appropriate (and probably more productive) if you went to the iphone board and asked there.
incredibly helpful, worked great on a nexus on at&t. thanks!!
I left it at 310 which is the default and i think the Android OS is somehow using background data.
Can someone help me android os is still using data with these apn settings. Im using a rooted nexus 4 with the stock rom.
tootang said:
Can someone help me android os is still using data with these apn settings. Im using a rooted nexus 4 with the stock rom.
Click to expand...
Click to collapse
It's not Nexus 4 forum.
Hi all. I'm a noob and a novice when it comes to phones and android. I have a AT&T galaxy S2 with a text plan, no data and I've been trying to figure out how to get MMS to work. I tried jjwantmyself's steps but I'm suspicious... MMS started working but so did all my apps and email.
jjwantmyself - is this what's happening in your case???
Also, I wasn't allowed to leave the MCC blank in the dummy APN. I had to use 310. For the APN type, I had to select from a predefined list which included internet, mms, supl for both the dummy and att mms. I tried setting the att mms APN type to just MMS but that didn't work.
knightster98 said:
Hi all. I'm a noob and a novice when it comes to phones and android. I have a AT&T galaxy S2 with a text plan, no data and I've been trying to figure out how to get MMS to work. I tried jjwantmyself's steps but I'm suspicious... MMS started working but so did all my apps and email.
jjwantmyself - is this what's happening in your case???
Also, I wasn't allowed to leave the MCC blank in the dummy APN. I had to use 310. For the APN type, I had to select from a predefined list which included internet, mms, supl for both the dummy and att mms. I tried setting the att mms APN type to just MMS but that didn't work.
Click to expand...
Click to collapse
You are correct in your assessment. I found that in some cases, Android would set the working 'data' connection as the selected / preferred connection, despite dummy having been previously chosen. I wish Android was a bit dumber in this area. My conclusion, for some time, has been that mms only is not viable unless your device properly honors your selected apn (ref anything that is not Android). Bottom line is that the people writing the code for smartphones are not catering for sms/mms only subscribers.
jjwatmyself said:
How many times have you given your 12 year old a smart phone with data disabled, only to then get the complaints that they can't send or receive MMS. This is how to configure APNs for MMS only, and great for people that don't have a data plan (kids). Note: Data has to be enabled but the phone will be mis-configured, therefore will never use any. All data connection attempts will fail except mms.
I have fully tested this on at&t. An equivalent config for other providers will work. Simply, break the part that makes data work.
Click to expand...
Click to collapse
The method on post #1 worked fine on my Nexus 4 until the Android 4.3 update.
Now it's not working anymore.
Well it's working if I'm connected to wifi (it uses the MMS APN for MMS), but if I'm not connected to wifi it doesn't work anymore.
Any idea? I was so happy that was working.
I have no data plan (I'm paying for what I use) but I have unlimited MMS.
it's still not letting me download my mms. "currently unable to download. please try again later." hmm...
I have not done any additional testing since I originally worked on this. Android continues to change with every version and manufacturer's implementation.
Solved for 4.4.2
jjwatmyself said:
I have not done any additional testing since I originally worked on this. Android continues to change with every version and manufacturer's implementation.
Click to expand...
Click to collapse
I have the Nexus 5 running Android 4.4.2 with the $30 T-Mobile plan with 1500 minutes/texts and 30 MB data, and finally was able to set mobile data to work only for MMS.
It seemed that no matter what the APN was set to, the phone would connect to the internet. Apparently, the newest Android got so smart that as long as there was any APN saved and the 'APN type' was set to 'internet,' 'default,' or was left blank, it would connect do mobile data regardless of any other settings.
The solution is to have only one APN with a fake name and APN, with the 'APN type' set to 'mms.' For example:
Name: Dummy
APN: dummy
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MMS port:
MCC: 310
MNC: 260
Authentication type:
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer:
MVNO type:
The actual details of the MMS-specific APN are found under the SMS settings through Hangouts - a separate APN with the original settings from T-Mobile. Using only the APN listed above means that the phone cannot connect to the internet except to send and receive MMSes.
Problem solved!
Well folks after a few diff ROMS and random tests I got the VZW GN2 running on Simple Mobile with great success.
> 4/Mbps Down
> 2/Mbps Upstream
+ Text/MMS working fine
+ No SIM Error/Missing annoyances
What I find ironic is at home in Brooklyn, NY my Verizon LTE only gets about 2Mbps Downstream and less then 500 Kbps Upstream. On Simple Mobile its most certainly faster. Granted....... I have yet to test in Manhattan but thus far it looks great. Going to give TMO a try also and see what it can do.
If anyone has interest ill document the results.
I have a custom ROM in progress but for the Simple Mobile test I used JellyBeans B13 and APN Editor mod on an obviously Unlocked Bootloader and Rooted GN2 via CASUAL.
Simple Mobile = $50/mo 4GB 4G + Unlimited Talk and Text w/o a contract seems like a no brainer given the speeds I am seeing. (My cellular data rarely breaks 2GB since I am generally on WifI)
UPDATED: Here is TMO -vs LTE in my house.
VZW 4G LTE :
621 kbps Down
166 kbps Up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TMobile HSPDA+ :
7,232 kbps Down
1,270 kbps Up
The results for about 20 block radius on VZW (even across the street from the VZW Store) only go up to about 2800 kbps down and not more then 800 kbps Up. The results attached are in my den in the house. (BTW I live in Brooklyn, NY..... not exactly out in the country far from civilization).
I need to borrow a friends Simple Mobile microsim and take a few screenshots of that also.
Overall VZW 4G coverage ; irrespective of indicated signal strength (2-5 Bars) has only broken 3000 kbps Down once .... TMO and Simple are def performing much better.
Please tell me how to do the same to my phone.
Money is kinda tight so I was thinking of switching me and my wife over to simple Mobile but don't know how I know very little about it.
Sent from my SCH-I605 using xda app-developers app
alki1979 said:
Please tell me how to do the same to my phone.
Money is kinda tight so I was thinking of switching me and my wife over to simple Mobile but don't know how I know very little about it.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
1) Download CASUAL onto your computer: http://forum.xda-developers.com/showthread.php?t=2043636
2) Download JellyBeans ROM Build 14 : http://forum.xda-developers.com/showthread.php?t=2032447
3) Make sure you have ClockworkMod Recovery installed and boot into Recovery Mode....
4) Flash JellyBeans ROM v13 or 14 from sdcard or external sdcard
5) go to settings -> Mobilenetworks and change from global or cdma/lte to GSM
6) reboot phone
7? post here if you have any problems after that
Get all that?
Yes thanks a lot I already have build 14 so thats cool! I dont have to mess with apns?
Sent from my SCH-I605 using xda app-developers app
---------- Post added at 04:10 PM ---------- Previous post was at 04:04 PM ----------
Just check in mobile networks and I dont have an option to change to gsm? I think I might have to reflash cuz I put a theme in... weird I do remember seeing it there before.
Sent from my SCH-I605 using xda app-developers app
Here is a pic of what I see sorry
Sent from my SCH-I605 using xda app-developers app
Tap on Access Points then hit the menu button and then add apn
Sent from my SCH-I605 using Tapatalk 2
How do I get those apns is it different for every location? Sorry first time with apns.
Sent from my SCH-I605 using xda app-developers app
The sim card once installed should pull the correct apn info for you. If not
TMobile is epc.TMobile.com
Simple Mobile has theirs listed on their website
Sent from my SCH-I605 using Tapatalk 2
Thanks alot you helped me a lot God bless you man!
Sent from my SCH-I605 using xda app-developers app
cjk2010 said:
The sim card once installed should pull the correct apn info for you. If not
TMobile is epc.TMobile.com
Simple Mobile has theirs listed on their website
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Have you used an AOSP rom on your Verizon Note 2 yet? Will data even work on them by editing the APN's?
Must certainly be the area your in. I pulled 15mbs down with simple, 20mbs with vzw in the same area. And I can tell you too I dropped calls 20 times as much with simple. What works in some areas might not in others.
Sent from my SCH-I605 using xda app-developers app
I have a locked bootloader. Can I use T-mobile with data if my phone is rooted?
Yes you can if ur on android 4.1.2 and above (4.3) you can add apns without root just pop in the new sim and go ti mobile network apns and add it and ur good to go
Sent from my SCH-I605 using xda app-developers app
Hi Guys,
Unfortunately I have not been able to get a data connection since I switched from Verizon to T-mobile with my Samsung Galaxy Note2. I am able to place and receive calls, and send and receive text messages, but no data connection. I created a new APN entry on my Note 2 with the following settings that are shown on T-Mobile's website, but still no data connection. Does anyone happen to know what 'magic setting' that I might have wrong? FYI, I've already tried both 'fast.t-mobile.com' and 'epc.tmobile.com' for APN field.
The only "data connection" that I've been able to get so far is I guess what's called an 'Edge' connection. What I mean by this is that at the very top of the screen just to the left of the signal strength icon instead of '4G LTE' or '3G', it instead shows a 'E', and below the 'E' are the normal up and down arrows. The 'Edge' connection is so slow, that all of the speed test applications that I've tried won't even run and bomb out with messages like 'no network connection' or 'check your connection', etc.
Any help or suggestions would be much appreciated.
Thanks
T-Mobile Samsung Galaxy Note II: Help and Support:
1. From any Home screen, tap Menu > Settings > Connections.
2. Tap More networks > Mobile networks > Access Point Names.
3. If available, tap the T-Mobile US APN (the bullet point fills with green). If not available, tap the Menu key, and then tap New APN. To reset your APN settings, tap the Menu key and then tap Reset to default.
4. Verify and update the following settings for the Data APN:
o Name: T-Mobile US LTE
o APN: fast.t-mobile.com
o Proxy: <Not set>
o Port: <Not set>
o Username: <Not set>
o Password: <Not set>
o Server: <Not set>
o MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
o MMS proxy: <Not set>
o MMS port: <Not set>
o MMS protocol: WAP 2.0
o MCC: 310
o MNC: 260
o Authentication type: <Not set>
o APN type: <Not set> OR Internet+MMS
o APN protocol: IPv4/IPv6
o APN roaming protocol: IPv4
o Enable/disable APN: <greyed out unless there are multiple APN's>
o Bearer: Unspecified
5. Tap Menu > Save.
6. Tap the desired APN profile you want to use. The bullet point fills with green next to the APN profile.
Link to 'Edge' network icon in the notification area at the top of the phone:
Couldn't post link due to spam restrictions on 'forum.xda-developers.com'
As the title says can someone with a store bought from ATT M8 post the APN settings.
Thank you in advance
CC
Straight from my AT&T M8. Hope this helps:
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,admin,fota,mms,supl,hipri,dun,att
APN enable/disable: Enabled
Bearer: Unspecified
Same as above here.
Sent from my HTC One using xda app-developers app
The att apns may show 8, but it is limited elsewhere in the rom to only use 3....just an fyi
Wonders_Never_Cease said:
The att apns may show 8, but it is limited elsewhere in the rom to only use 3....just an fyi
Click to expand...
Click to collapse
What are you referring to?
You may see all those apn's but its limited as to whats able to be used in the rom...
<item type="string" name="filter_apn_type_list">admin,mms,att</item>
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,admin,fota,mms,supl,hipri,dun,att
APN enable/disable: Enabled
Bearer: Unspecified
Yeah like this.
thanks for this.
When I first got my M8, the AT&T and normal Cricket settings did not work. Not sure how I found these, but they work flawlessly. If anyone is having Cricket issues with MMS in particular, try these.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi
I just received my Kenzo today but was only getting H+ and I definitely seen Band 4(1700/2100) LTE on spec sheets. I would like to have band 12(700) but I lived without it on my ZF2.
On the device I think it has the Global ROM as it had google apps etc. I updated latest OTA update.
I added an extra APN (you could probably modify the existing T-Mobile "epc.tmobile.com")
Go to : Settings > SIM cards & Mobile Networks > Select SIM 1 1-xxx-xxx-xxxx > Access Point Names > + New APN
Name: T-Mobile US LTE
APN: fast.t-mobile.com
Proxy: <Not set>
Port: <Not set>
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: <Not set>
MMS port: <Not set>
MCC: 310
MNC: 260
Authentication type: <Not set>
APN type: <Not set>
APN protocol: IPv4/IPv6
APN roaming protocol: IPv4/IPv6
APNEnable/disable: APN Enabled (greyed out)
Bearer: Unspecified
MVNO type: None
MVNO value: Note set (greyed out)
Save these settings and select as default APN.
I will be testing as not every location has good LTE speeds but it works. :highfive:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit: default apn settings now working for 4g.
This is great news but I'm out of the country and have a few questions:
1) Where did you buy your phone?
2) Can you confirm your ROM please?
3) See pic below and notice settings are different with no mcc etc. I know we need to change to fast.tmobile for 4G though.
4) What are the standard vpn settings you refer to in your last post? Like what shows up first without modifications.
If this works for me too I'll be in heaven because this phone is sweet when taking price, performance and epic battery life into account.
Bought from GeekBuying in China.
Popping the SIM in worked giving H+ so it had preconfigured settings.
Tried the standard config over the manual entry and 4g worked.
I updated to available OTA update.
Find build attached.
Had Google apps pre-installed.
Thanks
Twotems said:
Thanks
Click to expand...
Click to collapse
NOTE: MANUALLY SELECT NETWORK AND CHOOSE 4G! After you have added apn
Thanks for posting this. I recently got this to work as well and finally committed to cutting over to the phone today after getting the ROM set up and apps copied over.
I am having an issue however, I use Textra for messaging and I just realized that I can send mms but when I receive them the miui messaging app grabs them and they never make it to Textra.
Any thoughts or suggestions?;
Sent from my kenzo using Tapatalk
it2steve said:
Thanks for posting this. I recently got this to work as well and finally committed to cutting over to the phone today after getting the ROM set up and apps copied over.
I am having an issue however, I use Textra for messaging and I just realized that I can send mms but when I receive them the miui messaging app grabs them and they never make it to Textra.
Any thoughts or suggestions?;
Sent from my kenzo using Tapatalk
Click to expand...
Click to collapse
go to setting> other apps> select default>messaging > select yours