Hello all... After reading some threads I felt like I needed to start my own to clarify some things...
I have a friend who has a Galaxy SII (I9100) and she had some trouble with it...
SHe mentioned that her phone started acting erratic, freezing and saying that she didnt have enough memory (she only had 10 apps downloaded after a restore) and suddenly the phone restarted and a message saying that encription had failed. since I'm the one who fixes phones at work (from blackberry to iphone) she asked me if I could fix it.
The phone had pretty much like 80% batt left so I did what every mortal with a bit of knowledge would do... READ! I searched and the solution was to flash it with a newer firmware. I got the latest from SAMMOBILE and proceeded... For the record, the phone could get into recovery but recovery was messed up saying that a bunch of files were corrupt. I tried wiping and it showed an error message, so I proceeded to put it in download mode and set ODIN. Everything was going great... phone was detected,.. the process started.. Halfway through Odin FAILED... I restarted the phone and it didnt do anything... (crapping my pants started then...)
I started reading again (remembering the famous SDS on s3) and in different forums said that possibly some s2 came with the sds flaw and that that might have been my case. however, I always try to get more opions...
I tried using a USB JIG (which worked beautifully in other s2's that I have fixed) to no luck... With the battery in, the phone gets warm around the camera, but the usb jig doesnt do a thing...
So, I'm torn in two... My friend says that she thinks that the USB port was not working properly (she forgot to mention that at first) and sometimes it would appear af it nothing was connected and she had to jiggle the conector. I'm taking the phone to a service center tomorrow to check the port, but that is a pricey thing here in Venezuela... My second option is to sell it for spare parts...
Can I hear your opinions? Is it really hard bricked? Is it SDS?
I don't know which firmware it was running, and my friend doesnt know... my best guess is 2.3 since it's the one it came with and she never updated...
joancolmenares said:
Hello all... After reading some threads I felt like I needed to start my own to clarify some things...
I have a friend who has a Galaxy SII (I9100) and she had some trouble with it...
SHe mentioned that her phone started acting erratic, freezing and saying that she didnt have enough memory (she only had 10 apps downloaded after a restore) and suddenly the phone restarted and a message saying that encription had failed. since I'm the one who fixes phones at work (from blackberry to iphone) she asked me if I could fix it.
The phone had pretty much like 80% batt left so I did what every mortal with a bit of knowledge would do... READ! I searched and the solution was to flash it with a newer firmware. I got the latest from SAMMOBILE and proceeded... For the record, the phone could get into recovery but recovery was messed up saying that a bunch of files were corrupt. I tried wiping and it showed an error message, so I proceeded to put it in download mode and set ODIN. Everything was going great... phone was detected,.. the process started.. Halfway through Odin FAILED... I restarted the phone and it didnt do anything... (crapping my pants started then...)
I started reading again (remembering the famous SDS on s3) and in different forums said that possibly some s2 came with the sds flaw and that that might have been my case. however, I always try to get more opions...
I tried using a USB JIG (which worked beautifully in other s2's that I have fixed) to no luck... With the battery in, the phone gets warm around the camera, but the usb jig doesnt do a thing...
So, I'm torn in two... My friend says that she thinks that the USB port was not working properly (she forgot to mention that at first) and sometimes it would appear af it nothing was connected and she had to jiggle the conector. I'm taking the phone to a service center tomorrow to check the port, but that is a pricey thing here in Venezuela... My second option is to sell it for spare parts...
Can I hear your opinions? Is it really hard bricked? Is it SDS?
I don't know which firmware it was running, and my friend doesnt know... my best guess is 2.3 since it's the one it came with and she never updated...
Click to expand...
Click to collapse
Is she hot?
It seems that she was on 4.0.4, so yeah, bricked because of the wipes.
Sent from the little guy
ok... I assume it's bricked... but is it unbrickable?
Kinda...yeah; you'll need a mobo change.
Sent from the little guy
joancolmenares said:
ok... I assume it's bricked... but is it unbrickable?
Click to expand...
Click to collapse
Lol no, if it's because of the emmc brick bug then, maybe if you can still access recovery some repartition techniques might work but still don't get your hopes up, but if you have a faulty port then it will further worsen your situation.
Sent from my GT-P6200 using xda app-developers app
It all points to brick bug, never wipe on 4.0.4 (nor back up/restore).
She can claim warranty, samsung is to blame for this bug
Sent from the little guy
Well.. warranty will not work... the phone is like 2 years old and in our country this doesnt work for impored phones... it was not bought from a carrier.
Huguito's legacy, try an usb jig.
You've got nothing to lose.
Sent from the little guy
I have a USB jig which ha worked with another S2, S3, Note... but it is not working... I think I may have an issue with the USB connector... Any way, will try something tomorrow... and if it doesnt work, will sell it as spare... Thanks all for the comments...
Let me know how much would you like for it, was it made in Korea?
Sent from the little guy
Related
Hi everyone. I have made my biggest mistake in this life. I have fully bricked my S2 with odin while trying to flash it with DarkyROM. Ok, I am not newbie I know how to make things done. However, I followed tutorial which said that re-partition must be ticked and pit file included. I knew that re-partition is Number 1 to avoid. Let's say it was the time of me being unaware. So, I pressed start button. There was no progress for two hours. S2 started to heat badly. I needed to unplug it. So i did it. Know it is dead, 3 buttons combo isn't working as expected. I need to JTAG my phone, because USB JIG isn't working as expected. Can anybody suggest me anything? Any help would be appreciated.
Just go to service center and tell them kies broke your phone after a unsucessful update.. I saw somewhere in this forum a valid excuse where he said something about his pc being win7 with 64bit something w/c is not compatible with kies thus leading to hard brick.. Just make up stories and never mention odin blah blah..
Sent from my GT-I9100 using xda premium
Thank you very much for suggestion. I think it would work for me.
Is there an update to how this worked out? Did ATT do anything about the phone?
Not sure if you still have this problem but same thing happened to me
First the Answer if you dont' want to here my sob story:
Go to mobile tech videos (i can't post the link)
mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-jtag-brick-repair/
My Sob story:
I bricked my phone after trying to flash a rom with Chinese language support. The download screen hung for about 30 minutes so I ended up disconnecting my phone and removing the battery. After this the phone would not even power on, in fact the only sign of life was warmth comming from the back
I used the link above it took 13 days (it took him 1 day though) when sent from New Zealand and cost $50. I guess the Samsung service center option is the cheapest option (but this guy is fast)
Cheers
Hi all, im new to this android rooting stuff, i have jailbroken many apple devices, but im a big noob with rooting.
ill start from the start, i rooted my samsung galaxy s2 (I9210T) the other day with a stock ROM, using Odin and what not, it worked, no issues, but some non-market apps werent working but because of the stock ROM. So i followed a link that led me to "XDA"
In a hurry to root my phone with a custom ROM, i accidentally used a rom made for the I777, it booted and it all worked, just not the touch buttons at the bottom, (obviously), so again i downloaded a new ROM to get these buttons to work, and thinking im smart, i thought i could skip a step, and instead of flashing the phone again with odin, i loaded the clockwork recovery, and loaded this new ROM, without unloading the other thinking it would work, rebooted it, BUT it didnt reboot, it wont stay on, attempting to get into recovery is futile, and the phone is completely unresponsive, the computer makes the USB connection noises everytime i plug it in and take it out, but thats it, i do realise what ive done is completely idiotic and stupid, but is there anyway possible to recover my phone without having to take it in, or get a JTAG done?
Thanks to anyone who has a solution.
Citrus94 said:
Hi all, im new to this android rooting stuff, i have jailbroken many apple devices, but im a big noob with rooting.
ill start from the start, i rooted my samsung galaxy s2 (I9210T) the other day with a stock ROM, using Odin and what not, it worked, no issues, but some non-market apps werent working but because of the stock ROM. So i followed a link that led me to "XDA"
In a hurry to root my phone with a custom ROM, i accidentally used a rom made for the I777, it booted and it all worked, just not the touch buttons at the bottom, (obviously), so again i downloaded a new ROM to get these buttons to work, and thinking im smart, i thought i could skip a step, and instead of flashing the phone again with odin, i loaded the clockwork recovery, and loaded this new ROM, without unloading the other thinking it would work, rebooted it, BUT it didnt reboot, it wont stay on, attempting to get into recovery is futile, and the phone is completely unresponsive, the computer makes the USB connection noises everytime i plug it in and take it out, but thats it, i do realise what ive done is completely idiotic and stupid, but is there anyway possible to recover my phone without having to take it in, or get a JTAG done?
Thanks to anyone who has a solution.
Click to expand...
Click to collapse
well first sorry for ur present state ma8, if ur phone is not able to get into dwnld mode than its really difficult to do anything except for a JTAG done
just try using the three button combo Vol dwn + home + pwr butt and check for dwnld mode if u find success then flash a stock rom and u will get out of the situation
yeah, ive tried that so many times, too many to count, but, when doing it while its plugged into my computer, it makes the "USB disconnected" noise, which is weird.
i dont know where i can get a JTAG done, as i only recently saw it, not looked into it, im assuming phone repair shops do them? or can samsung do them even if the warruntee is voided, would they do it for a price? :s
Citrus94 said:
yeah, ive tried that so many times, too many to count, but, when doing it while its plugged into my computer, it makes the "USB disconnected" noise, which is weird.
i dont know where i can get a JTAG done, as i only recently saw it, not looked into it, im assuming phone repair shops do them? or can samsung do them even if the warruntee is voided, would they do it for a price? :s
Click to expand...
Click to collapse
the samsung people will defenetly do it, please check the same with them regarding the price etc
Citrus94 said:
yeah, ive tried that so many times, too many to count, but, when doing it while its plugged into my computer, it makes the "USB disconnected" noise, which is weird.
i dont know where i can get a JTAG done, as i only recently saw it, not looked into it, im assuming phone repair shops do them? or can samsung do them even if the warruntee is voided, would they do it for a price? :s
Click to expand...
Click to collapse
as u said u hear the usb connection sound when u connect ur phone
try using a usb jig
there may b chances of getting the phone in download mode
u can buy a usb jig from ebay
Sun90 said:
the samsung people will defenetly do it, please check the same with them regarding the price etc
Click to expand...
Click to collapse
well ill see about travelling into town after i find the price then, just hopefully it doesnt take long, will be away in a week :S
Thanks anyway sun90, just need to make sure there was nothing that can be done first, definately wont be making that mistake again LOL
neerajganga said:
as u said u hear the usb connection sound when u connect ur phone
try using a usb jig
there may b chances of getting the phone in download mode
u can buy a usb jig from ebay
Click to expand...
Click to collapse
that actually might work!! hope it does, atleast the jigs are cheap, orded one off ebay, should be here soon..... fingers crossed.
Erm, jig might help, but sounds like you've flashed a bad bootloader. Or a good bootloader, if you've got a I777. On the bright side, you've now got a really attractive paper weight. People will think your incredibly rich when you throw around a Galaxy S II just you just don't give a ****. Next time you're at a club single out the sluttiest girl there, go up to her and ask if she will have sex with you for a Galaxy S II, tell her the phone is out of battery, then go and do your business. When you hand over the phone make sure you are confident and humorous about it, give her a charging cable to make it look super legit. Oh and you should probably be wearing a balaclava throughout the whole process, you don't want her seeking revenge when she knows she's been used.
postfatal said:
Erm, jig might help, but sounds like you've flashed a bad bootloader. Or a good bootloader, if you've got a I777. On the bright side, you've now got a really attractive paper weight. People will think your incredibly rich when you throw around a Galaxy S II just you just don't give a ****. Next time you're at a club single out the sluttiest girl there, go up to her and ask if she will have sex with you for a Galaxy S II, tell her the phone is out of battery, then go and do your business. When you hand over the phone make sure you are confident and humorous about it, give her a charging cable to make it look super legit. Oh and you should probably be wearing a balaclava throughout the whole process, you don't want her seeking revenge when she knows she's been used.
Click to expand...
Click to collapse
As funny as what you said is XD i dont think telstra will be too happy that im using my phone to get with chicks, maybe after the 24 months is up XD
funny stuff just happened, i sent my phone away to get fixed, and it took them two weeks +
way too long, and when i got it back, i didnt have to pay, and this is what the samsung team did, as follows: Removed and replaced LCD screen with a new one, removed and replaced FPCB, checked main PCB, software upgraded, cleaned contacts, re-aligned connectors, reset to manufacturers specifications.
in other words, thanks to my Jig i bought off ebay, THEY DIDNT HAVE A CLUE WTH HAPPENED WITH IT!, but far out, what a repair eh?
Take a look at this, they can resurrect hard bricked phones:
http://forum.xda-developers.com/showthread.php?t=1429491
The total price is about £40 I think, hopefully it can be fixed! good luck!
Hi There,
I did search around and didn't find a specific answer to this, I did see someone was looking to modify some binary values but no confirmation if it worked. Anyways I have successfully used many roms on my phone and tablet but last night after using CWM and the rom flashed successfully I rebooted the device and then nothing. Blank screen. Nothing happens when I charge. Used the wife's battery fully charged to see if it would help. Tried three-button boot method. All nothing. It's just dead.
Now I'm guessing I must have missed a step somewhere and fully take responsibility for what happened, and would pay for a repair - but can Samsung even repair a device in this state? I talked to an agent on the phone last night and openly told them what happened and asked how much it would be to repair and he said he couldn't give me any information without sending the device in. This is my mistake to get my phone in this state so I don't want to sneak my way into a warranty replacement. Is it worth the wait as Samsung can fix this, or should I just buy a new phone?
Cheers and any information is much appreciated.
www.mobiletechvideos.com
They can repair bricked phones for a very reasonable cost. Samsung may see it and void your warranty. I'd go with Mobiletech. I've heard they do great work on bricked phones.
The above advice is good, assuming your device is truely hard bricked.
However, from your description, it's hard to figure how you bricked it. A true brick usually happens when an attempt to flash a bootloader partition gets interrupted in the middle. There are possibly other ways, but it's not very easy, actually. So, is there absolutely no sign of life? Nothing you can do will even get a flicker of light on the screen? You cannot enter download mode, or recovery mode. You have tried all of these? No point in spending $50 on a jtag repair if you can recover the phone yourself.
I would also be interested in a complete description of the steps that led up to the problem.
I'm a little embarrassed to post this but don't want to waste anyone's time. It is totally bricked but I know why.
I just noticed I downloaded a rom from the i777 forum, and my device is a i727.
Oooops! Guess I'm learning a valuable $50 (plus shipping) lesson.
Thanks for the help, my phone is off Mobile Tech.
Still might not be hard bricked. Mine did this a few weeks ago for no reason. Had been running fine then wouldn't boot one day. Wouldn't boot at all. Could not get into recovery.Nothing. Only thing that worked was connecting through Odin. Had to then flash original Gingerbread. Phone then booted fine. I have since rooted again and I'm now dual-booting SHOstock and Rootbox. Try Odin first.
SPatMobile said:
I'm a little embarrassed to post this but don't want to waste anyone's time. It is totally bricked but I know why.
I just noticed I downloaded a rom from the i777 forum, and my device is a i727.
Oooops! Guess I'm learning a valuable $50 (plus shipping) lesson.
Thanks for the help, my phone is off Mobile Tech.
Click to expand...
Click to collapse
I don't really know much about the I727 architecture, but I seriously doubt if your device is hard bricked. You should still be able to get into download mode via the normal procedure (maybe, or if not with a usb jig) for your phone, and then flash a good I727 rom, I believe. There are no bootloaders or partition information, or param files in any of the I777 roms, as far as I know, so there's really not much of anything that can do serious damage.
Try getting in to download mode by With your phone off and unplugged. Enter download mode by pressing and holding the power and volume down buttons and plugging in the USB cable before the lights blink. I don't know it will work on i727 but worth a try..GL
This is a good thread to help you read all you can....
http://forum.xda-developers.com/showthread.php?t=1652398
creepyncrawly said:
I don't really know much about the I727 architecture, but I seriously doubt if your device is hard bricked. You should still be able to get into download mode via the normal procedure (maybe, or if not with a usb jig) for your phone, and then flash a good I727 rom, I believe. There are no bootloaders or partition information, or param files in any of the I777 roms, as far as I know, so there's really not much of anything that can do serious damage.
Click to expand...
Click to collapse
Interesting. Well I suppose it is possible I had a legitamite hardware failure completely unrelated to the software issues. I did some searching around for hardware failures instead and found some very similar cases to this.
Exactly what happened. I downloaded the wrong rom, rebooted in cwm, wiped, then flashed the rom. It went successfully and I rebooted from cwm then during boot right after the samsung logo all the lights went off and the screen went black. I left it like this for about 45 mins to an hour and had dinner just in case it was still doing something. The battery was fully charged at the time I started the procedure, and I have tried using the wife's battery to make sure mine wasn't dead. My battery also functions without issues in her phone. I had done this successfully multiple times on my phone before and tablet, and successfully flashed two or three different roms on my wifes phone last night.
I tried every suggestion mentioned, and followed the guide as well. There is no glimar of life. If this is hardware I might be wasting my money with Mobile Tech but I suppose we'll know for sure soon. Phone is shipping off today.
Have you tried a jig?
Sent from my SGH-I777 using xda app-developers app
you're doing the right choice, mobile tech is your best bet
OP got his answer. And his device is an i727. Let's let this one die before we attract trolls
Sent from my SGH-I777 using Tapatalk 2
Ya good idea
Sent from my SAMSUNG-SGH-I777 using XDA
In case anyone was interested it looks like the device was a hardware failure.
"Unfortunately, I was not able to repair your device. The device's onboard EMMC controller was in a non-responsive state. It is advised to try out warranty replacement if possible or to search for a parts device and use it's mainboard for the swap."
*edit - I tried to use the thanks meter for everyone, but thanks for all the help!
Never was really a samsung fan until I got my i777. Blackjack? wth was that? Browsing with opera was off the hook though so the phone grew on me. Now I tried simply flashing a different i777 kernal because ICS constantly freezes and the phone bricks? Sent it to Mobile Tech Videos.... EMMC is in non responsive state for me too wtf Samsung? Had my nexus one twice as long and flashed twice as many times and its still rockin. Now will definitely think twice before going Sammy.
paulfrankie said:
Never was really a samsung fan until I got my i777. Blackjack? wth was that? Browsing with opera was off the hook though so the phone grew on me. Now I tried simply flashing a different i777 kernal because ICS constantly freezes and the phone bricks? Sent it to Mobile Tech Videos.... EMMC is in non responsive state for me too wtf Samsung? Had my nexus one twice as long and flashed twice as many times and its still rockin. Now will definitely think twice before going Sammy.
Click to expand...
Click to collapse
Did you wipe in ICS's stock recovery before flashing that different kernel? Because there's a well known brickbug with the I777's stock ICS kernel, where if you use it to do anything before you flash custom kernels, it'll mess up your EMMC and brick your phone. If this is what happened to you, I would suggest you do more reading before flashing anything again; different phones operate differently, and even if you're a pro at flashing stuff on a galaxy nexus that doesn't mean squat when it comes to flashing an I777. I don't mean to be harsh or offend you, I just want you to know that reading more is always a good idea, and that there's a chance that it wasn't Samsung's fault you wound up with a bricked device.
He could always try the jig to kick it into download mode. Read up about it. It may save you some money.
HTC = Hate The Consumer
Mobile tech will fix ya but in all seriousness, phones are way different from model to model. As previously stated. Read a lot before doing anything. may Atrix is way different than this phone,.
Sent from my SGH-I777 using Tapatalk 2
I've been trying to get my S2 right for awhile and finally traced some of my problems to a bad microusb connector...Anyways.. was in the process of flashing back to stock from cm7 with Odin and the phone hangs on the downloading screen, waited an hour and nothing changed. I know it says to not power off device but there was no way around it. Now the phone is bricked pretty darn good I believe. I can't get it to come on at all. I've tried the 3 button recovery mode, the download mode, and the good ole fashioned power button. One interesting thing is that the phone gets warm to the touch when the battery is installed, like it's trying to process something. Any Ideas what I can do?
Pull the battery and leave it out. Next try to put the phone into download mode by holding either one or both volume buttons while plugging in the USB cable. The PC will provide the power. If this boots to download mode, you can try flashing again from there.
firstly, thanks creepyncrawly for the advice! I've read some of your post and tuts and they've been a big help to me!
I just tried what you said and it's still a no-go. You got any other tricks left in the bag??
Am I the only one who read the title as "blackberry"? God I feel stupid...
killman2659 said:
Am I the only one who read the title as "blackberry"? God I feel stupid...
Click to expand...
Click to collapse
That's what I thought too lol
Sent from Team Pirate
extremeways said:
firstly, thanks creepyncrawly for the advice! I've read some of your post and tuts and they've been a big help to me!
I just tried what you said and it's still a no-go. You got any other tricks left in the bag??
Click to expand...
Click to collapse
Only guess work as to what happened. If there are no signs of life no matter what you do (aside from the phone getting warm) then one guess is that the usb port failed/disconnected during the flash of critical files. However, the stock package does not contain bootloaders, unless you used one from the download repository. So like I said, just guessing.
Anyway, I don't know any thing else to do except jtag repair, and with a bad usb port, that would not be cost effective. If it's under warranty, then go for warranty replacement. As far as I can see, you didn't cause the problem by what you did. It looks to me like it was due to hardware failure.
Already ahead of you I called att for warranty yesterday. I'm thinking the same as you as far as a bad USB port messing my flash up. The phone had been giving me all kinds of fits lately with that and I had that camera buzzing issue as well. Through my searches on this site it seems like the USB ports on our phones are a weak point. lots of people having trouble with them. It looks like the same port other devices use so do any of you know if ours is a cheaper one or is it just the nature of the beast with phones because of all the plugging and unplugging that a phone naturally goes through in it's lifetime?? And what about the camera buzzing? Anyone figure out what exactly causes that? If I had to guess it would be using the LED as a flash light, that's when I noticed it happening.
I'm just thinking ahead to when I get my replacement now and want to change any of my habits with the phone if that will extend the life of it.
On a side note, they offered me a skyrocket, to which I pitched a fit to no avail. I ended up accepting that but with the stipulation that I get a i777 when they are back in stock. I may escalate it to customer relations to see if I can get an s3 out of the deal. Though to be honest I would take an S2 over an S3. I love my S2
Hi!
While installing the revolt rom, downloaded here from the xda, the screen suddenly went black and the phone died. I have tried everything. I can't get to download mod or recovery mode. There's any sign from it... I read somewhere that a jig can help out! What do you think?
Thanks in advance!
[EDIT] The phone is a Samsung Galaxy S2!
Cheers!!
Did your phone shut off during the install?
Phone model? When exactly did it shut off?
Sent from my GT-I9100 using Tapatalk 2
Based on what you've said, I'm afraid your phone is hard bricked. I say this because the same thing occured to me, only I knowingly pulled the USB out whilst it was flashing a pit file. You mentioned your battery died, maybe leaving it plugged in to charge for over an hour or so might revive it, does the phone become slightly (if not) warm near the camera? If it does, you then atleast know the phone isn't completely dead (from fixing, that is).
I ordered a jig and that didn't work, luckily, my carrier provided a repair service guarantee in which they repaired the phone in a couple of weeks, I just played dumb over the phone prior to sending it off.
Good luck and keep us posted.
fagundes666 said:
Hi!
While installing the revolt rom, downloaded here from the xda, the screen suddenly went black and the phone died. I have tried everything. I can't get to download mod or recovery mode. There's any sign from it... I read somewhere that a jig can help out! What do you think?
Thanks in advance!
Cheers!!
Click to expand...
Click to collapse
please provide your ROM kernel details before you attempted to flash revolt ROM.
Swyped from my Samsung Galaxy SII
jthatch12 said:
Did your phone shut off during the install?
Click to expand...
Click to collapse
Hi!
I forgot to mention...My phone is a Samsung Galaxy SII!
Like jthatch12 said, the phone just shut off during the install process.
I've already instaled a lot of roms downloaded here from xda and never got this kind of trouble! I read somewhere that a jig would take to download mode... Hope so!
Thank you all!
Cheers!
BlurrOVO said:
Based on what you've said, I'm afraid your phone is hard bricked. I say this because the same thing occured to me, only I knowingly pulled the USB out whilst it was flashing a pit file. You mentioned your battery died, maybe leaving it plugged in to charge for over an hour or so might revive it, does the phone become slightly (if not) warm near the camera? If it does, you then atleast know the phone isn't completely dead (from fixing, that is).
I ordered a jig and that didn't work, luckily, my carrier provided a repair service guarantee in which they repaired the phone in a couple of weeks, I just played dumb over the phone prior to sending it off.
Good luck and keep us posted.
Click to expand...
Click to collapse
You pulled the usb cable out, while flashing a pit file?!
Why? Pit files are extremly dangerous.
I almost flashed a SGS1 pit file once..
Have you tried to remove the battery and leave for a few mins.
Sent from my HTC Desire using xda app-developers app
s.d.oconnor said:
Have you tried to remove the battery and leave for a few mins.
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Try that too... Several times! There's no sign of life...
fagundes666 said:
Try that too... Several times! There's no sign of life...
Click to expand...
Click to collapse
If you connect to your computer via USB are you getting any responce from your computer or phone at all. Also do you know anyone that has a galaxy s2, so you can see if it's the battery that has gone.
Sent from my HTC Desire using xda app-developers app
S II? Ok.
I9100/G/M/P/T? Your previous ROM? What are you did, more details. more.
If it doesn't go into Download Mode with a jig, then it looks like a full hard-brick.
Do you know why it shut off? Did you fully charge the phone before flashing the ROM? Did you compare the MD5 sums to check that the ROM wasn't corrupt?
I bricked my phone last year. I got Odin FAIL (corrupt ROM) and I pulled the battery. That was it - it was bricked. No download mode - nothing. I sent it off to Three and played dumb. Two weeks later, my phone was fixed.
If the jig doesn't work, your options are JTAG or service center.
epic118 said:
If it doesn't go into Download Mode with a jig, then it looks like a full hard-brick.
Do you know why it shut off? Did you fully charge the phone before flashing the ROM? Did you compare the MD5 sums to check that the ROM wasn't corrupt?
I bricked my phone last year. I got Odin FAIL (corrupt ROM) and I pulled the battery. That was it - it was bricked. No download mode - nothing. I sent it off to Three and played dumb. Two weeks later, my phone was fixed.
If the jig doesn't work, your options are JTAG or service center.
Click to expand...
Click to collapse
I didn't test any of those. The battery was ok.
I also did what s.d.oconnor said, I plug it into the computor but got no response.
The only response I got from the phone, is the warm up near the camera when I plugged it into charge for over an hour.
@bkjugg my previous rom was Wanan lite.
Thank you all.
Cheers!
I feel your pain!.. I just bricked my SGS2 yesterday. Knowing fully how I did it, but just had a brain-f*ck at the time..
I searched everywhere high and low on how to unbrick a hard brick. Already had a jig which didn't work.. tried every type of combo.. It's now going to get dropped into my local samsung repairer tomorrow to get looked at under warranty (as they can not tell how you hard brick it because they is no way of retrieving that information).
Jtag is for US customers, an I am not waiting 5 weeks for my phone.
Although until tomorrow, I am still going to look for a method to wake it up possibly..
I just took it as a known risk of flashing 100's of roms and kernels to my beloved phone..
markymark0055 said:
I feel your pain!.. I just bricked my SGS2 yesterday. Knowing fully how I did it, but just had a brain-f*ck at the time..
I searched everywhere high and low on how to unbrick a hard brick. Already had a jig which didn't work.. tried every type of combo.. It's now going to get dropped into my local samsung repairer tomorrow to get looked at under warranty (as they can not tell how you hard brick it because they is no way of retrieving that information).
Jtag is for US customers, an I am not waiting 5 weeks for my phone.
Although until tomorrow, I am still going to look for a method to wake it up possibly..
I just took it as a known risk of flashing 100's of roms and kernels to my beloved phone..
Click to expand...
Click to collapse
Hi!
I didn't try a jig because I don't have one. I've ordered one on ebay and I have to wait a few days now and see if it works. If not, I'll send the phone to samsung and try to get it repaired under warranty. If they say that it isn't covered by warranty, I'll try a guy on ebay uk. Just search for jtag s2.
Cheers!!
markymark0055 said:
I feel your pain!.. I just bricked my SGS2 yesterday. Knowing fully how I did it, but just had a brain-f*ck at the time..
I searched everywhere high and low on how to unbrick a hard brick. Already had a jig which didn't work.. tried every type of combo.. It's now going to get dropped into my local samsung repairer tomorrow to get looked at under warranty (as they can not tell how you hard brick it because they is no way of retrieving that information).
Jtag is for US customers, an I am not waiting 5 weeks for my phone.
Although until tomorrow, I am still going to look for a method to wake it up possibly..
I just took it as a known risk of flashing 100's of roms and kernels to my beloved phone..
Click to expand...
Click to collapse
Yep, same shiat. I can enter in download but can't in recovery + can't charge my phone ( has flashed 100500 ROMs, kernels, and all is ok, but not checked md5 - full wipe - bye bye until I return home. I hope I'll recover my phone.
Good luck OP.
I'm in the club for a brick SGS II, no smiles here too....
ChardC said:
I'm in the club for a brick SGS II, no smiles here too....
Click to expand...
Click to collapse
Since the jig didn't work, I sent my phone to samsung, under warranty! Now I just have to wait for better news...
my phone seems to have been bricked as well
Phone was about 80% power and plugged into the wall, all of a sudden, screen goes blank
- was browsing twitter at the time
cannot
- enter download mode
- enter recovery mode
- power on
- charge
tried
- usb jib (i have tried before while my phone actually worked and it didnt work then either)
- taking out battery, sim , microsd for 24 hours and trying to boot again
- swapped batteries with friends working i9100 , he boots up, i still dont
running
- CM9 cm-9-20120916-NIGHTLY-galaxys2.zip
- Siyah kernel SiyahKernel S2-v4.1.5
- GAPPS 20120429
- LPX modem
any ideas ?
Timstah said:
my phone seems to have been bricked as well
Phone was about 80% power and plugged into the wall, all of a sudden, screen goes blank
- was browsing twitter at the time
cannot
- enter download mode
- enter recovery mode
- power on
- charge
tried
- usb jib (i have tried before while my phone actually worked and it didnt work then either)
- taking out battery, sim , microsd for 24 hours and trying to boot again
- swapped batteries with friends working i9100 , he boots up, i still dont
running
- CM9 cm-9-20120916-NIGHTLY-galaxys2.zip
- Siyah kernel SiyahKernel S2-v4.1.5
- GAPPS 20120429
- LPX modem
any ideas ?
Click to expand...
Click to collapse
does it get hot if you plug it in the charger?
i bricked my SII last month trying to format internal sd in ext3, dont know what really happened, i rebooted and it just died, same symptoms as your phone.
i took it to a repair center under warranty and they replaced the motherboard for free.