[SOLVED] Re-root Xperia Mini pro sk17i after OTA - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

Hello everybody
I'll try to explain my problem with my bad english :
When I bought my xperia mini pro, I immediately unlocked it, rooted it and installed cyanogenmod 9. After many month of utilisation, I began changing ROM to test others. I obviously saved my system with rom manager to reinstall cyanogenmod if I had problems with the ROMs I tested. As no ROMs convinced me, I returned to cyanogen but it was quite bugging (maybe I didn't do well when flashing kernel and wiping).
My problem is: Yesterday I found Hasa MIUI 3.1.25 and it said that it need stock kernel to run. But I tried with the cyanogenmod kernel and I didn't want to start. So i found the ftf of ICS 4.1.B.0.587, I connected my phone in fastmode and used flashtool to flash the ftf. After that i thought i could install Hasa MIUI's ROM but what I didn't know, is that flashing a stock kernel will be considerated as doing an OTA ! So know MY PHONE HAS LOST HIS ROOT. I tried to reroot it with DooMLoRD"s tool and one other's sony tool (Wit a big button ROOT I don't remember the name) but when I run rom manager it's still says that my phone has to be rooted and that he can't access some files like system/su ...
So my question is : I lost my root after an OTA, how do I recorver it please ?
Thanks so much for those who'll answer me !

try e-root program , or unlock-root
or try the manual method & root a lower kernel

Or u could just flash a custom kernel like lupus etc, that would make it rooted (to my knowledge)
Regards
N

mnishamk said:
Or u could just flash a custom kernel like lupus etc, that would make it rooted (to my knowledge)
Regards
N
Click to expand...
Click to collapse
Do the following:
1.Download the Gingerbread rom(STOCK which is available for download on internet as SK17i_4.0.2.A.0.42_Generic_Trade_United_Kingdom_(1248-7407)).I hope you have seen the version I mentioned clearly.You should download only 4.0.2.A.0.42 and not 4.0.2.A.0.62(which is also availabe as STOCK,but not rootable directly)
2.Then download the STOCK ICS Rom(4.1.B.0.587).iF You have it already downloaded to your PC its better.
3.Now flash the Gingerbread rom (4.0.2.A.0.42).Enable USB Debugging,USB MasS Storage Mode and Allow installation from unknown sources.
4.Connect your device to the PC through USB.Then open the flashtool and click the root button.ROOT should now be available.
5.Download Xperia-Root rev.4 for 2011 sony devices from internet.And run 01-local-prop.
6.Now,turn off your device,and flash the ICS stock rom but untick the Wipe Data option first in the flashing options.
7.After flashing the stock rom,reboot.Now enable USB Mass storage mode.And run the file in Xperia-ROOT folder named as 02-push-root-files.
8.You are now on rooted ICS Stock Rom
Thank me,if I helped,
Regards

Siddhesh Sapre said:
Do the following:
1.Download the Gingerbread rom(STOCK which is available for download on internet as SK17i_4.0.2.A.0.42_Generic_Trade_United_Kingdom_(1248-7407)).I hope you have seen the version I mentioned clearly.You should download only 4.0.2.A.0.42 and not 4.0.2.A.0.62(which is also availabe as STOCK,but not rootable directly)
2.Then download the STOCK ICS Rom(4.1.B.0.587).iF You have it already downloaded to your PC its better.
3.Now flash the Gingerbread rom (4.0.2.A.0.42).Enable USB Debugging,USB MasS Storage Mode and Allow installation from unknown sources.
4.Connect your device to the PC through USB.Then open the flashtool and click the root button.ROOT should now be available.
5.Download Xperia-Root rev.4 for 2011 sony devices from internet.And run 01-local-prop.
6.Now,turn off your device,and flash the ICS stock rom but untick the Wipe Data option first in the flashing options.
7.After flashing the stock rom,reboot.Now enable USB Mass storage mode.And run the file in Xperia-ROOT folder named as 02-push-root-files.
8.You are now on rooted ICS Stock Rom
Thank me,if I helped,
Regards
Click to expand...
Click to collapse
Hmmm...are you kidding me????
since he already unlock his phone bootloader, there no need to go into this step just to root and install CWM on his phone....just flash any custom kernel that has stock base and you don't have to do this long step again....
all custom kernel with stock compatible is RIGHT HERE.....

Siddhesh Sapre said:
Do the following:
1.Download the Gingerbread rom(STOCK which is available for download on internet as SK17i_4.0.2.A.0.42_Generic_Trade_United_Kingdom_(1248-7407)).I hope you have seen the version I mentioned clearly.You should download only 4.0.2.A.0.42 and not 4.0.2.A.0.62(which is also availabe as STOCK,but not rootable directly)
2.Then download the STOCK ICS Rom(4.1.B.0.587).iF You have it already downloaded to your PC its better.
3.Now flash the Gingerbread rom (4.0.2.A.0.42).Enable USB Debugging,USB MasS Storage Mode and Allow installation from unknown sources.
4.Connect your device to the PC through USB.Then open the flashtool and click the root button.ROOT should now be available.
5.Download Xperia-Root rev.4 for 2011 sony devices from internet.And run 01-local-prop.
6.Now,turn off your device,and flash the ICS stock rom but untick the Wipe Data option first in the flashing options.
7.After flashing the stock rom,reboot.Now enable USB Mass storage mode.And run the file in Xperia-ROOT folder named as 02-push-root-files.
8.You are now on rooted ICS Stock Rom
Thank me,if I helped,
Regards
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Regards
N

THANK YOU
OMG thank you, I flashed the lupus kernel I found in your link and I have access to the recorvery menu ! AWESOME THANK YOU ALL !

Maws59 said:
OMG thank you, I flashed the lupus kernel I found in your link and I have access to the recorvery menu ! AWESOME THANK YOU ALL !
Click to expand...
Click to collapse
Happy to help
Now please edit the thread title with solved in place of q.
Regards
N

mnishamk said:
Happy to help
Now please edit the thread title with solved in place of q.
Regards
N
Click to expand...
Click to collapse
I tried to do it but it told me that I had to wait 5 minutes to post then I forgot x) But I have juste one last question please :3 : I have a physical keyboard on my sk17i but it is in qwerty even if in the parameters of language it says "French AZERTY". So how can I put my keyboard in AZERTY mode °°?
Thanks for your help !

Urm, in setting, language and input, something about phy keyboard.
Most probably editing it there will solve it.
Regards
N

Maws59 said:
I tried to do it but it told me that I had to wait 5 minutes to post then I forgot x) But I have juste one last question please :3 : I have a physical keyboard on my sk17i but it is in qwerty even if in the parameters of language it says "French AZERTY". So how can I put my keyboard in AZERTY mode °°?
Thanks for your help !
Click to expand...
Click to collapse
Hmmm.....
Setting/Language & Input/Physical Keyboard/pm8058-keypad.....
there you can change from qwerty to azerty......

Thank you very much :laugh: Now it is solved ! (but i' bet i'll have to wait 5 minutes again x)

Related

[RECOVERY image] {v2} X10 GB 3.0.1.G.0.75 [Prerooted + Fixed xRecovery]

This would not have been possible without the tools provided by aZuZu and the help provided by jerpelea!!!
THANK YOU GUYS!
[ Screenshots ]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[ Requirements ]
any working ROM with recovery
[best situation is to flash stock 2.1 se rom root it and install recovery using latest flashtool]
flashtool
FTF bundle posted below
Recovery image posted below
[ Features ]
Stock SE 2.3.3 ROM
prerooted (superuser files pre-installed, busybox pre-installed)
xRecovery-0.3 (GBready) recovery (all known issues related to recovery are fixed in this version)
[ Important Links Before u Begin ]
Flashtool
[FLASHTOOL GUIDE] HOW TO for n00bies
[ How To ]
*FOLLOW THE STEPS PRECISELY ELSE U WILL GET STUCK*
download the ftf bundle & compressed recovery image from linnks below
extract the contents of the recovery image to a folder on desktop
u will get a folder with 4 files as shown below:
connect device to PC and mount sdcard
copy that extrated folder to /sdcard/xrecovery/backup/
so final path to folder & files should look like:
/sdcard/xrecovery/backup/prerooted_X10i_3.0.1.G.0.75_fixed_rec/cache.img
/sdcard/xrecovery/backup/prerooted_X10i_3.0.1.G.0.75_fixed_rec/data.img
/sdcard/xrecovery/backup/prerooted_X10i_3.0.1.G.0.75_fixed_rec/nandroid.md5
/sdcard/xrecovery/backup/prerooted_X10i_3.0.1.G.0.75_fixed_rec/system.img
once copying is finished unmount sdcard and disconnect cable
reboot into recovery and restore this backup
AFTER RESTORE IS DONE DO NOT REBOOT
directly remove battery and wait for few minutes (since we dont have power off in recovery this is crude way to do it)
now start flashtool and connect X10 in flash mode and flash the ftf bundle provided below
after flashing is complete just restart device and enjoy prerooted X10 SE 2.3.3 GB!!!
[ Info ]
if u get adb push errors to /system then anantshri has a solution: check here
NO-KNOWN root exploit was used! all the info on how to do this is already there in the threads i had created earlier and of-course using some ingenuous thinking ... u can check my sig for the links to those threads...
files prepared from following FTF file posted in flashtool thread:
Androxyde said:
X10i Generic
Generic version 2.3.3 build 3.0.1.G.0.75 (MD5: 36F52BAA3556CDD7E56383614C01E5D6)
Click to expand...
Click to collapse
[ Donations ]
if u feel that this work has helped u OR u think that the work i put into making this is worthy of donations, then click on the following link for buying me some coffee/beer/etc
PAYPAL DONATION LINK
[ Downloads ]
FTF bundle (contains only kernel & baseband from stock SE FW 2.3.3)
[12MB] http://doomlord.sylvester20007.com/x10/x10_gb/X10i_3.0.1.G.0.75_only_kernel_baseband.7z [Multiupload mirror]
Recovery image
[109MB] http://doomlord.sylvester20007.com/x10/x10_gb/prerooted_X10i_3.0.1.G.0.75_fixed_rec.7z [Multiupload mirror]
[ Warning ]
if u ppl (modders/rom makers) will be using this work atleast link back to thread & atleast acknowledge the work i did!!! (this mean u too TripNRaVeR)
[ Older Verions ]
Older versions are posted below in 2nd post
Older Versions
THE FOLLOWING IS OLD INFO
[ Requirements ]
any working ROM with recovery [best situation is to flash stock 2.1 se rom root it and install recovery]
flashtool
FTF bundle posted below
Recovery image posted below
[ Features ]
Stock SE 2.3.3 ROM
prerooted (superuser files pre-installed, busybox pre-installed)
FreeXperia recovery (slightly buggy but will be improved later)
[ How To (Recovery Image Way)]
*FOLLOW THE STEPS PRECISELY ELSE U WILL GET STUCK*
download the ftf bundle & compressed recovery image from linnks below
extract the contents of the recovery image to a folder on desktop
u will get a folder with 4 files as shown below:
connect device to PC and mount sdcard
copy that extrated folder to /sdcard/xrecovery/backup/
so final path to folder & files should look like:
/sdcard/xrecovery/backup/prerooted_X10i_3.0.1.G.0.75/cache.img
/sdcard/xrecovery/backup/prerooted_X10i_3.0.1.G.0.75/data.img
/sdcard/xrecovery/backup/prerooted_X10i_3.0.1.G.0.75/nandroid.md5
/sdcard/xrecovery/backup/prerooted_X10i_3.0.1.G.0.75/system.img
once copying is finished unmount sdcard and disconnect cable
reboot into recovery and restore this backup
AFTER RESTORE IS DONE DO NOT REBOOT
wipe cache, data partitions
directly remove battery and wait for few minutes (since we dont have power off in recovery this is crude way to do it)
now start flashtool and connect X10 in flash mode and flash the ftf bundle provided below
after flashing is complete just restart device and enjoy prerooted X10 SE 2.3.3 GB!!!
[ How To (Alternate update.zip Way)] (thanks to kxhawkins)
*FOLLOW THE STEPS PRECISELY ELSE U WILL GET STUCK*
Hi guys since i am out right now i couldnt test it but kxhawkins has posted direct flash-able update.zip HERE, instructions are there in his post... please test it out and report back...
[ Info ]
this has already been tested to work by me, erickwill & kxhawkins... but please test it and report back...
NO-KNOWN root exploit was used! all the info on how to do this is already there in the threads i had created earlier and of-course using some ingenuous thinking ... u can check my sig for the links to those threads...
files prepared from following FTF file posted in flashtool thread:
Androxyde said:
X10i Generic
Generic version 2.3.3 build 3.0.1.G.0.75 (MD5: 36F52BAA3556CDD7E56383614C01E5D6)
Click to expand...
Click to collapse
[ Donations ]
if u feel that this work has helped u OR u think that the work i put into making this is worthy of donations, then click on the following link for buying me some coffee/beer/etc
PAYPAL DONATION LINK
[ Downloads ]
FTF bundle (contains only kernel & baseband from stock SE FW 2.3.3)
[12MB] http://doomlord.sylvester20007.com/x10/x10_gb/X10i_3.0.1.G.0.75_only_kernel_baseband.7z [Multiupload mirror]
Recovery image
[134MB] http://doomlord.sylvester20007.com/x10/x10_gb/prerooted_X10i_3.0.1.G.0.75.7z [Multiupload mirror]
[ Warning ]
if u ppl (modders/rom makers) will be using this work atleast link back to thread & atleast acknowledge the work i did!!! (this mean u too TripNRaVeR)
the prerooted + recovery image might be slightly buggy (as i havent verified the permissions on all files yet) but till then u can enjoy prerooted SE 2.3.3 GB ROM
[ Known Issues ]
Included recovery (FreeXperia recovery) is slightly buggy and might give "unable to mount sdcard" problem if used multiple times in same recovery session.. <<< FIX >>>: install the latest fixed xRecovery posted by zdzihu here: http://forum.xda-developers.com/showthread.php?t=859571
are u lookin fordward to custom kenrels??
files uploaded and posted!
happy play
waiting, exciting.!
Which CDA is this based on Doom?
Sent from my X10i using Tapatalk
That was extremely fast after the short time you had after the release,
Thank you dev team.
Flashing back to 2.1 and getting to play with 2.3.3 prerooted
Vatis
Good lad. Any chance of a thread or post so we know what Apps are safe to remove etc?
DooMLoRD said:
files uploaded and posted!
happy play
Click to expand...
Click to collapse
do you think the custum roms 3.60 or 3.63 will work???
youre awesome doom
AWESOME my friend! Good job!
If I don't currently have a rom with recovery/root, whats the easiest way to get one?
I'm on stock 2.1.
Andybrit said:
If I don't currently have a rom with recovery/root, whats the easiest way to get one?
I'm on stock 2.1.
Click to expand...
Click to collapse
root with flashtool and then after reboot instal busybox from market then flash xreco with flashtool
A little suggestion, next time u should upload to multiupload.com, now u have your server overloaded and we download @ 40 kb/s...
thanks my friend , gonna tray to optimise it cause is laggy as hell
cheers
Achotjan
Soon as my gf gets off pc will give this a shot and report back
Good job doom and freeXperia team
Sent from my Desire HD using XDA App
unbelievable, good work
Andybrit said:
If I don't currently have a rom with recovery/root, whats the easiest way to get one?
I'm on stock 2.1.
Click to expand...
Click to collapse
Just download the latest flashtool, connect your phone and press root , after that your phone will restart then ask root perms from flashtool again and install xrecovery through flashtool again.
Thats all good luck
achotjan said:
thanks my friend , gonna tray to optimise it cause is laggy as hell
cheers
Achotjan
Click to expand...
Click to collapse
Think removing crap apps could just be enough on this.
hey Doom, thanks for this! don you wanna mirror these files? the dl is pretty slow.
can i downgrade from Original GB to 2.1 then flash this?

[ROM]Ultimate-FXP_by_R-ik[Do you like speed?]

HERE is my first ROM developpement​
it's a MOD of FXP042 cyanogen 7.1 and [email protected] UI from jasonstein​
SCREENSHOTS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM:
V001: released
Changelog:
V001:
New UI from [email protected]
FXP Cyanogen7 as base
fixed sensor
reworked some lib files
added stock se camera now work!!!
more SE apps and widget (timescape; photowidget;...)
nice and fast (without bug)
Working:- all except CM7camera (to be reported) but stock se camera work
Not working:- to be reported
DOWNLOAD HERE:http://www.mediafire.com/?qeac7va1etfzbh1[/B]
CREDITS:
- FXP team (for the BIG work they did)
- jasonstein (for nice UI)
- joe from "phonandroid" for his Really good tutorial
If you like my work just hit thanks button!
Instruction:
read carefully theses information; i'm not responsive if you brick your phone or anything else
UNLOCK BOOTLOADER go here it is really easy:http://www.phonandroid.com/forum/deverrouiller-le-bootloader-t4303.html
Flash the latest 2.3.4 in flashtool
download >>>this kernel<<<then place it in root of your hard drive EX. C:\
enter in fastboot mode and type this adb command fastboot flash boot C:\boot.img
Go into clockworkmod by pressing volume key down when you start the phone
wipe dalvik cache wipe cache and wipe data
then go "into custom zip" then "choose custom zip from sdcard" and flash the above file
Flash Doomkernel for better X-perience
enjoy ultimate ROM by me
[reserved again]
i like that there are more roms coming for neo,
but why it this better than stock rom? only because the black theme?
Marcell96 said:
i like that there are more roms coming for neo,
but why it this better than stock rom? only because the black theme?
Click to expand...
Click to collapse
I can't say it is better because you have to try it and and give report but my rom is NOT a stock ROM it is totally based on CM7 ROM by FXP team: they've build their own sources (lib files; camera; network; optimisation;...) so it is tottaly different to a stock ROM because it is not the same base!!!
Here is just a little part of their work: http://forum.xda-developers.com/showpost.php?p=16379792&postcount=2
secondly I'll optimise this ROM again and again I think it is already SUPERFAST
so I suggest you to try it I'm sure you'll enjoy it
20min left!!!
i have tried there cm7.1 rom too but its very buggy and many things don't work,
fm radio, hdmi, camera, no flash, but when that's fixed it will be very good rom i think...
dobble post soory
Marcell96 said:
i have tried there cm7.1 rom too but its very buggy and many things don't work,
fm radio, hdmi, camera, no flash, but when that's fixed it will be very good rom i think...
Click to expand...
Click to collapse
this is modded ROM with some files from stock (for example lib files for camera is stock atm) so camera work flash too hdmi(didn't try) and fm radio (didn't try) too
and I have NO bug and boot time is really really fast try it with doomkernel!
Great work, It's a very good new for Neo! new ROM!
Can i use it if i have 2.3.4. base at Se.Tweaked v.05 ?
Sent from my MT15i using xda premium
SsneakersS said:
Can i use it if i have 2.3.4. base at Se.Tweaked v.05 ?
Sent from my MT15i using xda premium
Click to expand...
Click to collapse
if you have bootloader unlocked yes you just have to follow my instructions
I follow installation guide from you but after installation only get black screen and bootloop. My NEO phone is rooted with unlocked bootloader previously running SE Tweak rom v.04. Which kernel to use to get it work DoomKernel or freeXperia
Data Wipe> Install ROM> Flash kernel
i will download and test this rom ,thx~
Still cant make it to work I tried everything but still have only black screen. Can someone post the correct kernel to make it work on my Neo.
Sipi1302 said:
Still cant make it to work I tried everything but still have only black screen. Can someone post the correct kernel to make it work on my Neo.
Click to expand...
Click to collapse
The installation of this kernel won't make you lose any data
> You can also use the kernel in the firmware .145 (and only in this firmware) using the boot.img. However, it is less stable than having the latest firmware. I suggest you first set up.
1] Preparing Files
- Unzip the previously downloaded fastboot-USBdrivers.zip
- You will now have a folder fastboot-USBdrivers.
- Now move the file boot.img (see prerequisites) to the root of your hard drive
2] Connect the equipment
- Connect your Xperia neo fastboot mode:
Turn-on
While holding down the Menu button, connect the camera to your computer. The LED turns blue
- Now install the driver (if you do not SDKs) by following this tutorial using the file-fastboot USBdrivers I propose above.
3] Flashing the kernel
- Open the fastboot-USBdrivers then hold the SHIFT key (shift) key, right click on the folder and select fastboot "open a command prompt here".
Users of Windows XP or Vista, for which the "open a command prompt here" may not s'affichier, please follow this tutorial to display the option or install the SDK normally then enter the command
- If prompted, enter this command and hit enter:
Code:
fastboot flash boot C: \ boot.img
then reboot and voila
I have 2.3.4. firmware Neo tweaked v0.4, I flashed doomkernel v 0.9, and in recovery set to instal your rom but after successful installation and boot screen "Dommkernel" is bootloop. So Im not doing it in wright way or what.
which Kernels can it useful?
flash success,but has been restarted.
DM kernels fail
CM7 kernels fail
FXP042-cm7 kernels fail
r-ikfoot ...any recommended kernels?
sammao said:
which Kernels can it useful?
flash success,but has been restarted.
DM kernels fail
CM7 kernels fail
FXP042-cm7 kernels fail
Click to expand...
Click to collapse
Just like me.
DM kernel-black screen after boot
FX042 or 43 & CM7 kernel- bootloop
Maybe r-ifkoot you can put your kernel [email protected]#3 to download, so we who have this problem, to tray if it solve the problem.

[eazy Tutorial] [for locked bootloader] install CWM Recovery

hi. this Tutorial work perfect on every stock rom ( GB-ICS ) ( for all Xperia phone with 854*480 screen also can use this tutorial for all xperia with 480*320 screen but use install-cwm2.cmd in step 5 )
Requirements:
rooted phone
your phone driver
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to:
1.Download Attached File and extract it.
2.Make sure you enabled USB debugging (in settings/applications/development on ICS )
3.set Screen timeout to 10 minutes or more ( in settings/display/screen timeout on ICS )
4.connect you phone to pc with usb, during your screen is On.
5.Run install-cwm1.cmd from the file that you download it in step1.
6.when a black window opened, press any key to continue.
7.if superuser ask some thing, just tab allow.
8.wait to install be complete.
9.hit my thanks buttom
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
main topic here
saeed74 said:
hi. this Tutorial word perfect on every stock rom ( GB-ICS )
Requirements:
rooted phone
your phone driver
......................................................................................................................................................................................
How to:
1.Download Attached File and extract it.
2.Make sure you enabled USB debugging (in settings/applications/development on ICS )
3.set Screen timeout to 10 minutes or more ( in settings/display/screen timeout on ICS )
4.connect you phone to pc with usb, during your screen is On.
5.Run install-cwm1.cmd from the file that you download it in step1.
6.when a black window opened, press any key to continue.
7.if superuser ask some thing, just tab allow.
8.wait to install be complete.
9.hit my thanks buttom
...................................................................................................................................................................................
main topic here
Click to expand...
Click to collapse
Why need so much thing when there is `x-parts` in market.
Web_E said:
Why need so much thing when there is `x-parts` in market.
Click to expand...
Click to collapse
+1
pvyParts said:
x-Parts
Formerly 'Xperia CWM Auto-Installer'
READ THIS BEFORE GOING ANY FURTHER!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Howdy All!
So We've been Busy yet again
And we are proud to re-release This Tool. ​Whats new
All New UI that uses the ActionBarSherlock framework to give full Holo theme + Action Bar to devices pre ICS
To support more phones i have had to change the way the app works.
(OLD VERSIONS AVAILABLE IN ATTACHMENTS)
What it does now
1 - Check your phone model and compare it to a list of supported devices.
2 - If you phone is supported you can pick any of the supported CWM versions for you phone.
3 - When you click install it will download the CWM "recovery.tar" to your SD-card .
4 - Build you a "chargemon" file to match you phone.
5 - Take the charger + sh file from within the app.
6 - It then backs all the previous files up to the SD-Card and moves all the files to system as needed.
7 - if there are no problems then it is done and CWM is installed(into system)
Comming Soon
With the new app i am also able to do many new things that were not possible in it's last incarnation
(in no particular order)
1-Click De-Bloating of Stock Firmware
1-Click Enable of Init.d support for locked Bootloaders / Stock Kernels
Few more in the works too
Many more phones
My current plan is to support most Xperia devices
My current plan is to add these soon
X10, X8, Xperia S, U, P, Sola
also if there is no compatibility issues the app does not need to be updated to add phones / recoveries. I can do it all server side.
This App will work with the Sony Xperia porfolio. it will install CWM into the system partition so you can use recovery even with a locked bootloader!
Usage
Launch the Application,
Swipe Between Tabs or Pick Tabs
Let it detect your phones setup
Press Install and CWM will be installed into your system.
To access recovery simply, reboot phone and press any key on boot at the Sony Ericsson logo, when the notification LED turns Blue. or use the "reboot to recovery" button from within the app.
Recovery
Currently there are 2 recoveries that are able to be installed
2.3.* Roms
5.0.2.7 for GB Roms (nobodyAtall) [link]
4.0.* Roms
5.5.0.4 Recovery for ICS Based ROMS (pvyParts)
Changes
-USB Storage Mount works
-System wont be corrupted (Thanks nAa for the pointers + puppet13th for testing)
Requirements
Stock ROM
Root
(Locked Boot Loader, if you are unlocked you really don't need this)
Supported Phones!
LT15
LT18
R800
MT15
MT11
SO-01C
ST15
S51SE
SK17
ST17
SO-02
SO-03
SO-03
MK16
ST18
MK11
How to install!
grab it here
x-Parts on the Market!
or from the attachments in this thread!
if you experience issues with the app please post them here
Enjoy
Pvy.
Permissions explained.
Storage
Modify/Delete USB and SD-Card Storage Contents
Required to store files on SD-Card prior to installing to system
System Tools
Prevent Phone from Sleeping
Required to Wakelock the phone whilst installing to ensure no issues
Network Communication
Full Network Access
This allows x-Parts to get the current supported phones list and to download the "recovery.tar"
View network State
Allows x-Parts to check for a connection before connecting so it does not crash
Current bugs
MAJOR FIXED
If phone is unsupported app crashes (My bad i forgot to add the unsupported screen)
sometimes crash with no internet connection (Looking into it)
MINOR
Few Spelling mistakes (Again sorry will get someone who is betterer at englishing than me to fix it)
App Change Notes
Code:
[B]v6.0[/B]
All New App
100% generated chargemon
new recovery.tar selections
new backbone
Milestone 1
Screen Shots
Comming Soon[/SIZE]
Disclaimer:
I can't be held responsible if this Mod bricks your device or makes it explode in your hands! Use it at your own risk!
​
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1437840
But this is so eazy.
Sent from my WT19i using Tapatalk 2
Web_E said:
Why need so much thing when there is `x-parts` in market.
Click to expand...
Click to collapse
There are some people who don't always have wifi or data connection to use Xparts. This is quite handy, actually. Especially now that I don't have a fast wifi connection but badly needing cwm recovery.
saeed74 said:
But this is so eazy.
Sent from my WT19i using Tapatalk 2
Click to expand...
Click to collapse
But x parts is "eazier"
sony xperia ray
ics 4.0.4 rooted
stock rom

{Noob Guide} The Vault 101 {How to Flash a Custom Kernel}

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Vault 101​
Ssup people...im back with another beautiful thread..this time on How to Flash Kernels..again in Full Hd..:good:
FAQs
1.Whats a Kernel??
A.Kernel is something that sits between your OS and the hardware..It manages the resources ie..memory mangement, task management etc
2.How many kernels do we need??
A.Only one.
3.What are the types of kernels??
A.Stock Kernels and Custom Kernels.
4.I have a locked bootloader.Can i flash custom kernels??
A.Nnly stock kernels can be flashed. For custom kernels, you need to unlock your bootloader.
5. How do I unlock the bootloader??
A. http://forum.xda-developers.com/showpost.php?p=33673970&postcount=2
6. How to flash stock kernel??
A. http://forum.xda-developers.com/showthread.php?t=1973017​
There are 3 methods for flashing a kernel
1.Flashtool
a) ADB
b) Fastboot
2.CMD
3.Kernel Flasher​
1. FLASHTOOL
Requirements
1. Flashtool
Official Site http://androxyde.github.com/index.html?1352015649000
4Shared http://www.4shared.com/zip/JeZM_nDa/flashtool-0980-windows.html
After downloading and unzipping..please install in C:/ Drive​
2. Custom Kernel
Get one from here http://forum.xda-developers.com/showthread.php?t=1316394
Procedure
I. Copy Kernel file to C:/ > Flashtool > Firmwares >
II. Install drivers(Fastboot) Goto C:/ > Flashtool >drivers and click on Flashtool-drivers.exe
III.Open Flashtool C:/ > Flashtool and right click on FlashTool.exe(32 bit) or FlashTool64.exe(64 bit) and "run as administrator"
IV. In your phone..
Select MSC mode..Goto Xperia>Connectivity>USB connection mode
Select Unknown sources..in Security
Select USB debugging..in Developer options..
Select Stay awake..if u want..​
Now you have two options..either go via A) ADB or B) Fastboot
Only one step differs...between the two
A) ADB
I. Just connect your phone to PC.
II. Click on the flash icon(top left) and select Fastboot mode.
III. Now click "Reboot into fastboot mode (via ADB)"
IV.Once the device is connected in fastboot mode...click on "Select kernel to Flash"
V. Now select the kernel you wanna flash and click open.
DONE!!!!​
B)Fastboot
I. Power Off...Hold Menu button...Insert USB
II. Click on the flash icon(top left) and select Fastboot mode.
III.Once the device is connected in fastboot mode...click on "Select kernel to Flash"
IV. Now select the kernel you wanna flash and click open.
DONE!!!!​
2.CMD
Requirements
1.Fastboot.zip
View attachment fastboot.zip
Download the zip and extract to get fastboot folder.​
2. Custom Kernel
Get one from here http://forum.xda-developers.com/showthread.php?t=1316394
Procedure
I. Open fastboot folder.
II. Copy the kernel image in the folder.
III. Now hold shift button on keyboard and right click in the folder. Click on "open command window here". A command prompt window should open up.
IV. Now we type in this code and hit enter.
Code:
[B]fastboot flash boot boot.img [/B]
V. It'll say waiting for device..Now switch off your phone..after a few seconds..hold MENU button and connect USB..(while holding that button)
VI. Done. Check for any errors..if no errors are shown. Boot it up!! :good:
​
FAQs
1. The kernel I've downloaded has a 'name.img' and not boot.img??
A. While typing the code...in the end type name.img..in place of boot.img
Eg. 1.Lupus Kernel (File name says LuPuS_haida_v3-jB.img)...so the code should be..(Note that I haven't used capitals..)
fastboot flash boot lupus_haida_v3-jb.img​
2. Alliance Kernel (boot_ics_v1_5.img)..and so the code
fastboot flash boot boot_ics_v1_5.img​
3.Kernel Flasher
A very useful tool made by Ghostfreak NB for flashing kernels(img, elf and sin) :good:
Ghostfreak's Kernel Flasher
Woot!!! I finished flashing the custom kernel..but what are these Governors and I/O Schedulers??
Read these
http://forum.xda-developers.com/showpost.php?p=34070584&postcount=1
http://forum.xda-developers.com/showpost.php?p=34779861&postcount=1
http://forum.xda-developers.com/showpost.php?p=25587909&postcount=1
I wanna be a Kernel Guru. Really?!! Go here http://forum.xda-developers.com/showthread.php?t=1369817
FAQs
http://forum.xda-developers.com/showpost.php?p=25615630&postcount=3
1. How much can I overclock??
A. Depends on the custom kernel.
2. Is it safe to overclock??
A. Maybe. You can go upto 1.4Ghz but anything above that for long periods would kill the processor.
3. Is overclocking useful??
A. Yea. It does increase performance.
Get the right combo of Clockspeed, Governor and I/O Scheduler and your phone will fly
4. I flashed a kernel...now wifi doesnt work??
A. Flash the wifi modules for that kernel.
Re: {Noob Guide} The Vault 101 {How to Flash a Kernel}
Dude u just saved my life.
I was about to unlock my bootloader and was searching for a guide..
And magically this thread appears..
Thanks a lot..:thumbup:
Sent from my MT11i using xda app-developers app
LoneWanderer said:
Woot!!! I finished flashing the custom kernel..but what are these Governors and I/O Schedulers??
Read these
http://forum.xda-developers.com/showpost.php?p=34070584&postcount=1
http://forum.xda-developers.com/showpost.php?p=34779861&postcount=1
http://forum.xda-developers.com/showpost.php?p=25587909&postcount=1
FAQs
http://forum.xda-developers.com/showpost.php?p=25615630&postcount=3
1. How much can I overclock??
A. Depends on the custom kernel.
2. Is it safe to overclock??
A. Maybe. You can go upto 1.4Ghz but anything above that for long periods would kill the processor.
3. Is overclocking useful??
A. Yea. It does increase performance.
Get the right combo of Clockspeed, Governor and I/O Scheduler and your phone will fly
Click to expand...
Click to collapse
Here's a heck of a thread you just might have overlooked.
[REF][TWEAKS] Kernel Governors, Modules, I/O Schedulers, CPU Tweaks, AIO App Configs
And most of the threads are a sub-thread of this Original thread.
You might wanna consider adding this to your POST
THis is one thread which contains all info regarding I/Os ,Governors,etc from A....Z
THXX
Thxx for the guide.. it really helped......
Hello !
I have a small problem that I can't find the answer to, more precisely I'm using MIUIv4 3.2.22 ROM and I want to flash another kernel. Using fastboot, I get the message that I don't have root permissions.
Is there a way to overcome this issue ?
Best regards,
Tavix92
Tavix92 said:
Hello !
I have a small problem that I can't find the answer to, more precisely I'm using MIUIv4 3.2.22 ROM and I want to flash another kernel. Using fastboot, I get the message that I don't have root permissions.
Is there a way to overcome this issue ?
Best regards,
Tavix92
Click to expand...
Click to collapse
Have you unlocked your bootloader?
Yes, Unlocked BL.
I tried with 3 or 4 kernels (compatible with the ROM I have on the device).
The message I get is that I don't have root permissions. (something like that).
@Ghostfreak..yea i've seen that thread before...but i thought it would be overwhelming..this is a newbie guide afterall...so dint add
@Tavix92...Update root binary..nd try again...if problem persists try CMD method..nd report...
Update : CMD method added :good:
LoneWanderer said:
@Ghostfreak..yea i've seen that thread before...but i thought it would be overwhelming..this is a newbie guide afterall...so dint add
@Tavix92...Update root binary..nd try again...if problem persists try CMD method..nd report...
Update : CMD method added :good:
Click to expand...
Click to collapse
How do I update / replace root binary on MIUI ?
Open superuser app..nd update binary...sorry for the fancy word 'root binary'
Well, I understood that, don't worry
The small problem is that on MIUI I can't find a way to do that. The app managing root access is called Permission Manager (v. 3.3.1076).
Can this be fixed ? If not, what ROM would you recommend for Xperia Neo V ?
Sorry man.. Donno...never tried MiUi..
Nd bout roms..there are several gud ones..ViperXperia, UltimateHD,RevolutionICS, Pureness,...check them out...im not gonna tell you which is the best rom.. So dont ask..try urself
Update - New Method Added :good:
Ghostfreaks Kernel Flasher..
i have a neo l android v4.0.4 which is rooted..unlocked the bootloader..i flashed the lupus custom kernel..n nw it has struck on d lupus symbol wht m i suppoz to do...do i need to flash rom with the kernel..???...it ws on stock kernel mt25i..

Sony Xperia Go ST27i 6.2.A.1.100 1264-7472 firmware.

Here it is. Created while updating myselfe on SUS.
http://failiem.lv/u/jiuhvld
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wow? is this new version of JB Xperia go? My version is. 400 not. 100
Whats d diffirent?
frey.derico said:
Wow? is this new version of JB Xperia go? My version is. 400 not. 100
Whats d diffirent?
Click to expand...
Click to collapse
Yes its new. Governor has chainged to ondemand. Home launcher is transparent. System is faster and battery life seems to be improved.
del
Can you root it?
Does it support custom boot by munjeni for root n cwm methode guys?
Cool!! Thank you for sharing bro!!
Sent from my ST27i using xda app-developers app
netmaniack said:
Yes its new. Governor has chainged to ondemand. Home launcher is transparent. System is faster and battery life seems to be improved.
Click to expand...
Click to collapse
How to root it?
can someone confirm if munjeni's kernel works on this?
GiorgosCyprus said:
can someone confirm if munjeni's kernel works on this?
Click to expand...
Click to collapse
I try with Phantom 1.0.8 Performance kernel and succesfully rooted this ROM
1. Download this .FTF
2. Open Flashtool ( 0.9.11.0 - latest version ). Flash .ftf via Flashtool till finish
Don't forget to safe kernel.sin ( stock JB Sony kernel )
3. Switch On and do some configuration ( Setup Wizard )
4. Flash kernel via Fastboot ( select phantom performance kernel.elf as source )
5. Reboot phone
6. Do root phone by click on Unlocked Icon at Flashtool
7. Now flashtool will send restore configuration to phone, just follow the instruction from Flashtool
8. After flashtool reboot your phone, go to Superuser, and do update su binary
9. Flash kernel via Fastboot ( select Stock JB kernel.sin as source )
10. Tada...... I have 6.2.A.1.100 JB from Sony with rooted status
Ask : Why I change back kernel to JB Stock ?
Answer : With phantom kernel, PC Companion still ask me to upgrade 6.2.A.1.100. So, change back to stock JB kernel
Now I will clean some app that I didn't need for my daily use.
Abhy-Boy said:
I try with Phantom 1.0.8 Performance kernel and succesfully rooted this ROM
1. Download this .FTF
2. Open Flashtool ( 0.9.11.0 - latest version ). Flash .ftf via Flashtool till finish
Don't forget to safe kernel.sin ( stock JB Sony kernel )
3. Switch On and do some configuration ( Setup Wizard )
4. Flash kernel via Fastboot ( select phantom performance kernel.elf as source )
5. Reboot phone
6. Do root phone by click on Unlocked Icon at Flashtool
7. Now flashtool will send restore configuration to phone, just follow the instruction from Flashtool
8. After flashtool reboot your phone, go to Superuser, and do update su binary
9. Flash kernel via Fastboot ( select Stock JB kernel.sin as source )
10. Tada...... I have 6.2.A.1.100 JB from Sony with rooted status
Ask : Why I change back kernel to JB Stock ?
Answer : With phantom kernel, PC Companion still ask me to upgrade 6.2.A.1.100. So, change back to stock JB kernel
Now I will clean some app that I didn't need for my daily use.
Click to expand...
Click to collapse
Awesome but i prefer to use this Munjeni's Method
istambul said:
Awesome but i prefer to use this Munjeni's Method
Click to expand...
Click to collapse
I have try with Munjeni V3. Use boot.img as kernel to flash, but my wifi didn't work. So I try with Phantom kernel, and wifi work fine. Hope Munjeni make new Xtreme Security ( V4 maybe ) with 6.2.A.1.100 base system file.
Abhy-Boy said:
I have try with Munjeni V3. Use boot.img as kernel to flash, but my wifi didn't work. So I try with Phantom kernel, and wifi work fine. Hope Munjeni make new Xtreme Security ( V4 maybe ) with 6.2.A.1.100 base system file.
Click to expand...
Click to collapse
I don't know exactly but my wifi is working fine, just follow step by step munjeni's OP
Abhy-Boy said:
I have try with Munjeni V3. Use boot.img as kernel to flash, but my wifi didn't work. So I try with Phantom kernel, and wifi work fine. Hope Munjeni make new Xtreme Security ( V4 maybe ) with 6.2.A.1.100 base system file.
Click to expand...
Click to collapse
If you flashed ONLY boot.img in order to make cwm or push SU BINARY you will get prob wifi or bluetooth, so dont forget to put some .ko file n wifi driver. Check package of boot.img. A.600 you will find them so wifi works well
Abhy-Boy said:
I try with Phantom 1.0.8 Performance kernel and succesfully rooted this ROM
1. Download this .FTF
2. Open Flashtool ( 0.9.11.0 - latest version ). Flash .ftf via Flashtool till finish
Don't forget to safe kernel.sin ( stock JB Sony kernel )
3. Switch On and do some configuration ( Setup Wizard )
4. Flash kernel via Fastboot ( select phantom performance kernel.elf as source )
5. Reboot phone
6. Do root phone by click on Unlocked Icon at Flashtool
7. Now flashtool will send restore configuration to phone, just follow the instruction from Flashtool
8. After flashtool reboot your phone, go to Superuser, and do update su binary
9. Flash kernel via Fastboot ( select Stock JB kernel.sin as source )
10. Tada...... I have 6.2.A.1.100 JB from Sony with rooted status
Ask : Why I change back kernel to JB Stock ?
Answer : With phantom kernel, PC Companion still ask me to upgrade 6.2.A.1.100. So, change back to stock JB kernel
Now I will clean some app that I didn't need for my daily use.
Click to expand...
Click to collapse
You returned to stock kernel but are still rooted? Also when im tying to root my phone with flashtool it says "no root exploit for this version".
this with this kernel and root
GiorgosCyprus said:
You returned to stock kernel but are still rooted? Also when im tying to root my phone with flashtool it says "no root exploit for this version".
Click to expand...
Click to collapse
Yes. You need upgrade latest Flashtool about that error.
Windows Edition - v0.9.11.0 - MD5 : A0F880F3CF420A31D86026F49A2013D7
Abhy-Boy said:
1. Download this .FTF
2. Open Flashtool ( 0.9.11.0 - latest version ). Flash .ftf via Flashtool till finish
Don't forget to safe kernel.sin ( stock JB Sony kernel )
3. Switch On and do some configuration ( Setup Wizard )
4. Flash kernel via Fastboot ( select phantom performance kernel.elf as source )
5. Reboot phone
6. Do root phone by click on Unlocked Icon at Flashtool
7. Now flashtool will send restore configuration to phone, just follow the instruction from Flashtool
8. After flashtool reboot your phone, go to Superuser, and do update su binary
9. Flash kernel via Fastboot ( select Stock JB kernel.sin as source )
10. Tada...... I have 6.2.A.1.100 JB from Sony with rooted status
Ask : Why I change back kernel to JB Stock ?
Answer : With phantom kernel, PC Companion still ask me to upgrade 6.2.A.1.100. So, change back to stock JB kernel
Now I will clean some app that I didn't need for my daily use.
Click to expand...
Click to collapse
Can you please tell me how to do it on locked Bootloader?
Mirror link in here
http://forum.xda-developers.com/showpost.php?p=46325507&postcount=37
tt1991tt said:
Mirror link: https://docs.google.com/file/d/0B5iuJcjgtKP1bTFfQ3UtVTlKTlE/edit?usp=sharing
Click to expand...
Click to collapse
That is wrong file. This is CE and You have mirrored ST27i_6.2.A.1.100_1265_2259_World_Malaysia.ftf.

Categories

Resources