So im trying to root my new s4 and after installing the latest Samsung drivers adb will not find my s4 or s3, and odin same thing. Ive updated sdk and not sure where to go from this point... Any ideas?
Sent from my SCH-I545 using Tapatalk 2
abalsor said:
So im trying to root my new s4 and after installing the latest Samsung drivers adb will not find my s4 or s3, and odin same thing. Ive updated sdk and not sure where to go from this point... Any ideas?
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
I'll assume that you have also enabled USB debugging (just want to ensure )
try
Code:
adb kill-server
if that doesn't work if you hadn't already rebooted I would try that.
if that didn't work try another usb port/cable
[email protected] said:
I'll assume that you have also enabled USB debugging (just want to ensure )
try
Code:
adb kill-server
if that doesn't work if you hadn't already rebooted I would try that.
if that didn't work try another usb port/cable
Click to expand...
Click to collapse
Usb debugging is on, have tried reboots.. Found it curious that both the s3 and s4 would do the same thing...
Sent from my SCH-I545 using Tapatalk 2
abalsor said:
Usb debugging is on, have tried reboots.. Found it curious that both the s3 and s4 would do the same thing...
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
did you un-check "Verify Apps" under Security?
yyhd said:
did you un-check "Verify Apps" under Security?
Click to expand...
Click to collapse
All directions in the root thread followed perfectly... All settings are right...
Sent from my SCH-I545 using Tapatalk 2
abalsor said:
All directions in the root thread followed perfectly... All settings are right...
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
hmm...im not sure. i actually had a similar issue with an AT&T S4 last week, and i also couldnt figure it out. however, i returned the device for other reasons.
I would try another USB cable if possible. In the past I have had issues with Samsung phones regarding data connectivity either adb/odin.
[email protected] said:
I would try another USB cable if possible. In the past I have had issues with Samsung phones regarding data connectivity either adb/odin.
Click to expand...
Click to collapse
i have never had any problems with any USB cable i've used, but it doesnt hurt to give it a try. Maybe you'll find it is the cable's problem.
Are you using USB 3.0 ports? I tried on my new desktop and ODIN wouldn't find my phone, but I used it on my Windows 8 laptops with USB 2.0 and it worked fine.
I've tried multiple cords, and different ports.. Going to try a different computer tomorrow...
Sent from my SCH-I545 using Tapatalk 2
abalsor said:
I've tried multiple cords, and different ports.. Going to try a different computer tomorrow...
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Any luck with a different computer?
Sent from my Verizon S4 using Tapatalk 2
yyhd said:
Any luck with a different computer?
Sent from my Verizon S4 using Tapatalk 2
Click to expand...
Click to collapse
Did have success using another computer... Going to have to tear down the desktop and figure out what's going on
Sent from my SCH-I545 using Tapatalk 2
abalsor said:
Did have success using another computer... Going to have to tear down the desktop and figure out what's going on
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
i had a problem with a driver just going kapoot on my recently. i tried uninstalling and reinstalling, still no good. i removed all other drivers and software that i thought may be related to the problem, but the problem still persisted.
in the end, i just backed up all my important data to an external HDD and did a complete restore of Windows 7. All my problems were gone. I'm not saying this is what you should do or that this is your only options, but what I am saying is you could always restore to this.
yyhd said:
i had a problem with a driver just going kapoot on my recently. i tried uninstalling and reinstalling, still no good. i removed all other drivers and software that i thought may be related to the problem, but the problem still persisted.
in the end, i just backed up all my important data to an external HDD and did a complete restore of Windows 7. All my problems were gone. I'm not saying this is what you should do or that this is your only options, but what I am saying is you could always restore to this.
Click to expand...
Click to collapse
I've tried the same route with no success.. So i will be re-installing windows today. Wish they had a linux verison of the root, would make like life easier lol...
abalsor said:
I've tried the same route with no success.. So i will be re-installing windows today. Wish they had a linux verison of the root, would make like life easier lol...
Click to expand...
Click to collapse
I had the same issue and found that after plugging into my laptop where I initially rooted, the phone wanted me to allow USB debugging from my desktop; perhaps I had never done so in the first place...
Anyway, long press on home button and see if maybe you just need to find the notification, as I understand it can get buried under everything and not pop up...
Other than that, I'm not sure what to tell you. Maybe try the universal ADB driver from the folks at CWM?
OverkillSD said:
I had the same issue and found that after plugging into my laptop where I initially rooted, the phone wanted me to allow USB debugging from my desktop; perhaps I had never done so in the first place...
Anyway, long press on home button and see if maybe you just need to find the notification, as I understand it can get buried under everything and not pop up...
Other than that, I'm not sure what to tell you. Maybe try the universal ADB driver from the folks at CWM?
Click to expand...
Click to collapse
Yea , when I plugged into my lappy running Ubuntu 13.04 it popped up to allow for it access the computer. Not sure if my drivers are completely screwed up so doing a fresh install..
abalsor said:
Yea , when I plugged into my lappy running Ubuntu 13.04 it popped up to allow for it access the computer. Not sure if my drivers are completely screwed up so doing a fresh install..
Click to expand...
Click to collapse
When I went to my DT after lappy, the popup appeared and let me solve the whole not-being-seen problem. Have you tried it since you used lappy?
Also, remove all your samsung drivers and try the universal adb driver from CWM.
OverkillSD said:
When I went to my DT after lappy, the popup appeared and let me solve the whole not-being-seen problem. Have you tried it since you used lappy?
Also, remove all your samsung drivers and try the universal adb driver from CWM.
Click to expand...
Click to collapse
I had reinstalled all samsung drivers, trying the universal adb driver now.. I thought that was for windows 8 only but we shall see...
*edit- installed and reinstalled all drivers, with no luck...
abalsor said:
I had reinstalled all samsung drivers, trying the universal adb driver now.. I thought that was for windows 8 only but we shall see...
Click to expand...
Click to collapse
if that doesn't work, post a screenshot of your Windows Device Manager, and the Properties window of the Samsung device
OverkillSD said:
if that doesn't work, post a screenshot of your Windows Device Manager, and the Properties window of the Samsung device
Click to expand...
Click to collapse
https://docs.google.com/file/d/0ByJe0XtTYosZeXczb2tBOEVKdTA/edit?usp=sharing
edit- made public
Related
When I plug my phone into my computer, it is no longer recognized by windows. It used to... now it doesnt...
I have googled this
I have checked the forums
I have NOT found a solution that works
I have tried booting my phone while it's plugged in.
I have tried reinstalling kies.
The phone comes up as "uknown device" in the usb section of device manager, when i specify the 64bit drivers(I'm running win7 pro 64) it says drivers are up to date! and then proceeds not to work.
I have also tried setting my phone into usb debugging mode.
I have tried all my computers usb ports.
If anyone knows how to help me I'd really appreciate it.... and if I've blindly missed something feel free to call me a moron so long as you successfully help me
chaosthebomb said:
When I plug my phone into my computer, it is no longer recognized by windows. It used to... now it doesnt...
I have googled this
I have checked the forums
I have NOT found a solution that works
I have tried booting my phone while it's plugged in.
I have tried reinstalling kies.
The phone comes up as "uknown device" in the usb section of device manager, when i specify the 64bit drivers(I'm running win7 pro 64) it says drivers are up to date! and then proceeds not to work.
I have also tried setting my phone into usb debugging mode.
I have tried all my computers usb ports.
If anyone knows how to help me I'd really appreciate it.... and if I've blindly missed something feel free to call me a moron so long as you successfully help me
Click to expand...
Click to collapse
Rom? etc.
Sent from my GT-I9000 using XDA Premium App
Stock with a voodoo kernel, do I need to turn voodoo off?
chaosthebomb said:
Stock with a voodoo kernel, do I need to turn voodoo off?
Click to expand...
Click to collapse
I have noticed that some ROM's will enable debugging, I personally run a MAC. But you may want to check those settings to see if its enabled/disabled. But if your charging on it you should be good. Have you tried to odin back to stock and seeing if that helps?
Other thing: do you have the samsung drivers installed on your PC? even if you don't you should still see the external storage just not the internal.
lovemysgs said:
I have noticed that some ROM's will enable debugging, I personally run a MAC. But you may want to check those settings to see if its enabled/disabled. But if your charging on it you should be good. Have you tried to odin back to stock and seeing if that helps?
Other thing: do you have the samsung drivers installed on your PC? even if you don't you should still see the external storage just not the internal.
Click to expand...
Click to collapse
Reinstalk drivers as he said
Sent from my GT-I9000 using XDA Premium App
I should have listed this before... I reinstalled the drivers first before reinstalling kies or checking out device manager
chaosthebomb said:
I should have listed this before... I reinstalled the drivers first before reinstalling kies or checking out device manager
Click to expand...
Click to collapse
Any other devices recognize it?
Sent from my GT-I9000 using XDA Premium App
What rom are you using? If you are running one of the test CM7 builds you have to download the Google drivers from the Android SDK.
Does your phone show up when you mount it as external memory? Did you install the drivers and kies as an administrator?
exact same scenario!
I am having the exact same issues as the OP! Except that i have the unbranded gt-i9000. My galaxy s is completely stock, no custom firmware or launchers. Heck, after the last factory reset, not even any apps!
I have tried every suggestion on every search i could do. I have 4 computers with xp sp3, win7 sp1, ubuntu 10.04.1, and mac os x 10.5.8. Nothing is working on any of them. I've even tried different usb cables, just to rule that out.
Could it be a samsung hardware issue?
My Samsung Galaxy Note II (Verizon) won't show up in Odin. I've installed the samsung drivers but its doesn't recognize the phone. I can go into download mode on my phone, but I'm stuck in a boot loop. What can I do? Any help is much appriciated
I'm having the same issue on Windows 8 64 bit. I had all drivers in place and everything worked perfect. Usb MTP and PTP, in both regular and usb debugging modes. Adb worked and Odin worked. I unlocked a Note 2 for a buddy using the updated casual (as of 5/3) method. I had issues with Casual that I could only fix by uninstalling my drivers and allowing it to install it's own. Now when I connect my rooted Note or any Note, the computer can only see the phone in Camera (PTP) WITHOUT Usb debugging on. The computer can't see it in any other mode. No adb or odin.
I've uninistalled the drivers, reinstalled them, installed Kies, used another Note 2 tool and allowed it to install the drivers. Uninstalled them and let the computer decide which drivers. Every time I get the same result. I can only see the phone in Camera mode without debugging on.
Any help would be appreciated!
Sent from my SCH-I605 using Xparent Green Tapatalk 2
I had a similar problem with my Note 2, and eventually had to use a different computer.
Sent from my SCH-I605 using xda premium
USB Debgging Mode
Yeah, I am having the a same problem. Although I rooted my i605 and had the TWRP Recover, decided to go back to stock using http://forum.xda-developers.com/showthread.php?t=2040264 . Well Verizon sent an OTA last night and I clicked update on accident, and now it is in a boot loop. I can get into download mode but odin does not see the device, I am almost positive that this is because I cannot put the device into USB Debugging Mode.
More research is need for now, but your sounds like the same thing.
twistedxj said:
Yeah, I am having the a same problem. Although I rooted my i605 and had the TWRP Recover, decided to go back to stock using http://forum.xda-developers.com/showthread.php?t=2040264 . Well Verizon sent an OTA last night and I clicked update on accident, and now it is in a boot loop. I can get into download mode but odin does not see the device, I am almost positive that this is because I cannot put the device into USB Debugging Mode.
More research is need for now, but your sounds like the same thing.
Click to expand...
Click to collapse
That has got to be the problem. Is there any way to turn on debugging mode even with a looping boot? It was on before this problem occured, but it must have been switched at some point when I tried to root.
Usb debugging and download are different modes. I've odin'ed countless times. The problem is in the drivers. I'm still tinkering but cant get them to see the device.
Sent from my SCH-I605 using Xparent Green Tapatalk 2
bennybroseph said:
That has got to be the problem. Is there any way to turn on debugging mode even with a looping boot? It was on before this problem occured, but it must have been switched at some point when I tried to root.
Click to expand...
Click to collapse
Believe me I am very new to this but extremely tech savvy, I have spent almost all of my work day searching XDA and numerous other sites and I have not found a way.
Unfortunately this is on me i know after i rooted and loaded the Jedi ROM, that I had set the updates to stop, but I guess I forgot to when I "unrooted". Oh well you live you learn, that's how I started on computers back in the day, break it and fix it all day long, lol
I've exhausted everything I can think of. I'm about ready to try my old W7 computer and if that fails, I'll go back to XP.
Sent from my SCH-I605 using Xparent Green Tapatalk 2
---------- Post added at 08:40 PM ---------- Previous post was at 08:37 PM ----------
OP, will you update the title with "Unable to use Odin (Driver Issue)" to hopefully draw attention of a developer or someone with more knowledge. As stated, it'll quickly be dismissed as a noob problem where it is very clearly not at this point.
Sent from my SCH-I605 using Xparent Green Tapatalk 2
joshw0000 said:
Usb debugging and download are different modes. I've odin'ed countless times. The problem is in the drivers. I'm still tinkering but cant get them to see the device.
Sent from my SCH-I605 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Josh I cannot help but think that if these two do not go hand in hand then why would every instructable on this advise to first set USB Debugging Mode to On, then reboot to download mode??
Like I said I am new to this and do my research before hacking anything up, so i may be incorrect.
twistedxj said:
Josh I cannot help but think that if these two do not go hand in hand then why would every instructable on this advise to first set USB Debugging Mode to On, then reboot to download mode??
Like I said I am new to this and do my research before hacking anything up, so i may be incorrect, but I do not think so.
Click to expand...
Click to collapse
If you're using an automated program to hack your phone then usb debugging is required so it can send adb commands to the phone telling it to reboot to download mode. However, without usb debugging enabled, you can power off and manually boot to download mode and Odin will work all the same.
Most tutorials and tools are noob friendly and it's easier for them to send the "adb reboot bootloader" command then to instruct the user to do it manually.
I've been rooting since the HTC Eris so I'm no noob. I'm not a developer either but I'm 99.9% sure the problem is driver related.
Sent from my SCH-I605 using Xparent Green Tapatalk 2
joshw0000 said:
If you're using an automated program to hack your phone then usb debugging is required so it can send adb commands to the phone telling it to reboot to download mode. However, without usb debugging enabled, you can power off and manually boot to download mode and Odin will work all the same.
Most tutorials and tools are noob friendly and it's easier for them to send the "adb reboot bootloader" command then to instruct the user to do it manually.
Sent from my SCH-I605 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Interesting, thanks for schooling me! Now I am completely lost!!!
I have 2 perfectly fine Note 2's in my hand (both rooted and rom'ed) and can't get my computer to recognize either accept for in a Camera mode without usb debugging enabled.
Let's try to get a common ground here. When did everyone unlock their bootloaders? More specifically, when did you use Adam Outler's (big props to that guy) tool on your computer?
I just plugged my Note 2 in my work computer with usb debugging enabled and it sees it perfectly. So something driver related is messed up on my computer.
Sent from my SCH-I605 using Xparent Green Tapatalk 2
joshw0000 said:
I have 2 perfectly fine Note 2's in my hand (both rooted and rom'ed) and can't get my computer to recognize either accept for in a Camera mode without usb debugging enabled.
Let's try to get a common ground here. When did everyone unlock their bootloaders? More specifically, when did you use Adam Outler's (big props to that guy) tool on your computer?
I just plugged my Note 2 in my work computer with usb debugging enabled and it sees it perfectly. So something driver related is messed up on my computer.
Sent from my SCH-I605 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Actually that's why I Un-Rooted mine, I used Adams Method and the loaded the Jedi ROM, when I connected it to the pc after after a couple days it would only recognize as PTP not MTP?!? This was only with USB Debugging Mode enabled, if I turned it off it did not recognize it at all. So I decided to Un-root the device, then a week later I get the OTA and selected update and now it is dead
April 28th Rooted & ROM'ed
May 3rd Back to Stock
May 9th BRICKED
twistedxj said:
Actually that's why I Un-Rooted mine, I used Adams Method and the loaded the Jedi ROM, when I connected it to the pc after after a couple days it would only recognize as PTP not MTP?!? this was onlky with USB Debugging Mode enabled, if I turned it off it did not recognize it at all. So I decided to Un-root the device, then a week later I get the OTA and selected update and now it is dead
April 28th Rooted & ROM'ed
May 3rd Back to Stock
May 9th BRICKED
Click to expand...
Click to collapse
Thanks for the info. You're only soft bricked. We'll get the drivers straightened out. Worst case, go to another computer and you'll be back in business in no time.
Sent from my SCH-I605 using Xparent Green Tapatalk 2
joshw0000 said:
Thanks for the info. You're only soft bricked. We'll get the drivers straightened out. Worst case, go to another computer and you'll be back in business in no time.
Sent from my SCH-I605 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Sweet...... I did try my XP machine but did not think about it being a VM. I tried another computer installed the drivers and opened odin, looks like I am getting blue again. Man I have a lot to learn!
twistedxj said:
Sweet...... I did try my XP machine but did not think about it being a VM. I tried another computer installed the drivers and opened odin, looks like I am getting blue again. Man I have a lot to learn!
Click to expand...
Click to collapse
I think I just fixed the drivers on my W8 machine. Looks like we're both good.
Sent from my SCH-I605 using Xparent Green Tapatalk 2
joshw0000 said:
I think I just fixed the drivers on my W8 machine. Looks like we're both good.
Sent from my SCH-I605 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
That's great, now what about the OP?
twistedxj said:
That's great, now what about the OP?
Click to expand...
Click to collapse
Where is he? The issue is probably with the driver. He can connect and go to device manager. He'll have to open up some of the universal serial bus and see what the computer recognizes the phone as. If you can't tell, unplug it and see which on the list goes away. Re-plug if it comes back, update drivers with the Samsung drivers. That should put him back in business (you too).
Sent from my SCH-I605 using Xparent Green Tapatalk 2
twistedxj said:
Yeah, I am having the a same problem. Although I rooted my i605 and had the TWRP Recover, decided to go back to stock using http://forum.xda-developers.com/showthread.php?t=2040264 . Well Verizon sent an OTA last night and I clicked update on accident, and now it is in a boot loop. I can get into download mode but odin does not see the device, I am almost positive that this is because I cannot put the device into USB Debugging Mode.
More research is need for now, but your sounds like the same thing.
Click to expand...
Click to collapse
joshw0000 said:
Where is he? The issue is probably with the driver. He can connect and go to device manager. He'll have to open up some of the universal serial bus and see what the computer recognizes the phone as. If you can't tell, unplug it and see which on the list goes away. Re-plug if it comes back, update drivers with the Samsung drivers. That should put him back in business (you too).
Sent from my SCH-I605 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
It recognizes it as Samsung Android Device. I've already re-installed the Samsung drivers several times.
bennybroseph said:
It recognizes it as Samsung Android Device. I've already re-installed the Samsung drivers several times.
Click to expand...
Click to collapse
And you're in Odin? It should be a Samsung Composite or Fastboot Device or something of that nature. I don't think it should see your phone as a phone in Odin. Have you tried changing the drivers or just uninstalling/reinstalling?
Sent from my SCH-I605 using Xparent Green Tapatalk 2
hey everyone, so ive have went thru all the threads i can find, done alot of research and have come up short. seems like alot of the users with the Verizon I605 Samsung Note 2 have the same problem, not connecting to their PC's.
-ive restarted both my note 2 and my PC numerous times.
-ive installed/uninstalled/re-installed the official Samsung website device drivers
-tried other USB ports
-tried up to 4 different USB/Mini USB cords
-made sure USB debugging was switched on
-Tried Samsung Kies, come to find out it doesn't support the I605 Note 2
-called Verizon and Samsung directly and both actually offered me a position as a tech after i told them all the things i did to figure it out, because it was way more then they could handle.
i know it has connected before, as i have done it once or twice a few weeks back but now it wont connect, drivers fail to install, and nothing else works. i have also tried every other method mentioned in the other threads. nothing has worked.
is there any fix for this? was it cause by the latest update?
im running 4.1.2/ VRAMC3
and im using Windows 7
please anyone lmk if there is a fix for this. ive exhausted all avenues known to me. thanks in advance.
Happened to me too, it's USB port in your computer. If you have any other computer or laptop try using that.
You can also try wireless connection for file transfer.
Sent from my SPH-L710 using xda premium
Hope you found your answer. If not have this moved. This was posted in the sprint version of the note 2 forums.
Sent from my SPH-L900 using Tapatalk 2
The appropriate forum would probably be more helpful.
Plus, are you getting any error messages? I've had issues with connecting the Sprint GN2. If I install the Samsung Drivers, I get a "Missing Hardware ID" error. I just found it's better not to install drivers. Let Windows install what drivers it can. Not all the drivers will install and will get an error message about device not successfully installed. But enough install that the GN2 will connect so you can move files around for MTP. See a thread I did back in December, linky
Also, you can try out SG Flash Drive Enabler. I've tried it out. It works pretty well. It has quirks, but does allow you to use your SDHC card as a flash drive. You have to use the MTP to access the phone's storage.
oh man...*face palm* sorry about posting in the wrong forum guys, i was about to crash and i didn't even realize. my mad.
MODS: please move this to the correct Forum section at your earliest convenience, thanks :silly:
i have found that airdroid does work for wifi file transfers for such things as pictures, music...etc. but im wanting to root my note 2 and it needs a direct line from the phone to the pc to work.
ill check out those links posted up and see what how it goes. but we still need a fix for this. kinda lame only (well most) the verizon SN2 is having this problem.
flip06 said:
...im wanting to root my note 2 and it needs a direct line from the phone to the pc to work....
Click to expand...
Click to collapse
You may want to use ToolKit. I believe it's setup for AT&T tool. Uninstall KIES and all the samsung driver on the your PC. Choose to have ToolKit install the drivers. It should get your enough connection for ADB to work and be able to root and install a custom recovery. I had to use it a couple days ago to get a custom recovery back on the GN2 and I was getting the Missing Hardware ID error and still worked.
lovekeiiy said:
You may want to use ToolKit. I believe it's setup for AT&T tool. Uninstall KIES and all the samsung driver on the your PC. Choose to have ToolKit install the drivers. It should get your enough connection for ADB to work and be able to root and install a custom recovery. I had to use it a couple days ago to get a custom recovery back on the GN2 and I was getting the Missing Hardware ID error and still worked.
Click to expand...
Click to collapse
Ive done that very process. Uninstalled kies and installed the toolkit drives. Some reason it would sort of connect but then disconnect. Never stayed on and wasnt able to be picked up as connected on the Odin program.
flip06 said:
Ive done that very process. Uninstalled kies and installed the toolkit drives. Some reason it would sort of connect but then disconnect. Never stayed on and wasnt able to be picked up as connected on the Odin program.
Click to expand...
Click to collapse
I had a problem in windows 7 where it would connet to Windows update and try to get drivers for everything once they were connected. I turned off windows looking at windows update for drivers, uninstalled the driver for the phone, then installed Samsung's drivers. my phone showed up in windows again. now im able to get to both sd cards.. did you try that?
PuffJr2 said:
I had a problem in windows 7 where it would connet to Windows update and try to get drivers for everything once they were connected. I turned off windows looking at windows update for drivers, uninstalled the driver for the phone, then installed Samsung's drivers. my phone showed up in windows again. now im able to get to both sd cards.. did you try that?
Click to expand...
Click to collapse
That's what I did to fox it as well
Sent from my SCH-I605 using xda app-developers app
PuffJr2 said:
I had a problem in windows 7 where it would connet to Windows update and try to get drivers for everything once they were connected. I turned off windows looking at windows update for drivers, uninstalled the driver for the phone, then installed Samsung's drivers. my phone showed up in windows again. now im able to get to both sd cards.. did you try that?
Click to expand...
Click to collapse
where did you go on windows 7 to turn off the above mentioned? the middle part confuses me a bit. so your saying you turned off the windows feature to look for driver updates when the phone is connected via USB?
if you dont mind, please walk me thru your process. thanks in advance.
flip06 said:
where did you go on windows 7 to turn off the above mentioned? the middle part confuses me a bit. so your saying you turned off the windows feature to look for driver updates when the phone is connected via USB?
if you dont mind, please walk me thru your process. thanks in advance.
Click to expand...
Click to collapse
http://technet.microsoft.com/en-us/library/cc730606(v=ws.10).aspx
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
http://technet.microsoft.com/en-us/library/cc730606(v=ws.10).aspx
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
I was just abput to refer this link to him. you beat me too it! loljooo
shangrila500 said:
http://technet.microsoft.com/en-us/library/cc730606(v=ws.10).aspx
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
thank you so much for the link. but still no dice. i uninstalled the drivers i had before, did your method, and then downloaded the drivers again from the toolkit. i still dont get a serial number in the toolkit showing the drivers are good to go, and the phone still doesn't connect.
WHAT THE DEUCE?!
flip06 said:
thank you so much for the link. but still no dice. i uninstalled the drivers i had before, did your method, and then downloaded the drivers again from the toolkit. i still dont get a serial number in the toolkit showing the drivers are good to go, and the phone still doesn't connect.
WHAT THE DEUCE?!
Click to expand...
Click to collapse
Do you have Kies installed? I have to have Kies installed along with the other drivers to use Casual, Odin, or any of the other tools
Sent from my SCH-I605 using XDA Premium HD app
shangrila500 said:
Do you have Kies installed? I have to have Kies installed along with the other drivers to use Casual, Odin, or any of the other tools
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
Kies was un-installed per instuctions on the toolbox. i guess i could try and re-install it and retry everything.
EDIT: just remembered that Kies dosnt support the Verizon Note 2....lame sauce.
Source: https://community.verizonwireless.com/message/966503
i am going to try to download a older driver that was working before and see if that works. its linked near the bottom of the above posted link in one of the replies. ill come back with results.
ok so i downloaded the samsung drivers version 1.4.6.0 and followed the directions on the link i provided above. the drivers installed successfully, but the CASUAL(R515b) No You Verizon! program doesn't seem to see the phone connected to the computer. and just continually loops. sigh...this is getting to get stupid. such a simple task yet its not connecting.
EDIT: the drivers SAY they have installed successfully, but the computer still doesn't recognize the phone is connected. even reads on the phone that the software wasnt found to connect to the computers, and the CASUAL program also tells me that the phone isnt connected....sigh...seriously....WTF.
When you install your driver's on your pc you need to restart your pc...have you tryed that?
Sent from my Enormous note 2
flip06 said:
Kies was un-installed per instuctions on the toolbox. i guess i could try and re-install it and retry everything.
EDIT: just remembered that Kies dosnt support the Verizon Note 2....lame sauce.
Source: https://community.verizonwireless.com/message/966503
i am going to try to download a older driver that was working before and see if that works. its linked near the bottom of the above posted link in one of the replies. ill come back with results.
Click to expand...
Click to collapse
While Kies does not officially support the VZW Note 2 it is the only way me and my friends can get our PCs to see our Note 2s, that's the only reason I ask and it is usually par for course. Its what's suggested in these cases if it isn't already installed. It can hurt to give it a shot and see if it helps anything, if not you can just uninstall it again.
Also check out the OP in this thread:
http://forum.xda-developers.com/showthread.php?t=2304481
And if that doesn't help you can always try the code in the last post of this page and see if it works:
http://forum.xda-developers.com/showthread.php?t=2033870&page=2
Sent from my SCH-I605 using XDA Premium HD app
mr pnut said:
When you install your driver's on your pc you need to restart your pc...have you tryed that?
Sent from my Enormous note 2
Click to expand...
Click to collapse
yup tried that.
shangrila500 said:
While Kies does not officially support the VZW Note 2 it is the only way me and my friends can get our PCs to see our Note 2s, that's the only reason I ask and it is usually par for course. Its what's suggested in these cases if it isn't already installed. It can hurt to give it a shot and see if it helps anything, if not you can just uninstall it again.
Also check out the OP in this thread:
http://forum.xda-developers.com/showthread.php?t=2304481
And if that doesn't help you can always try the code in the last post of this page and see if it works:
http://forum.xda-developers.com/showthread.php?t=2033870&page=2
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
ive redownloaded it, so ill give it another try. are you saying just have it downloaded and then do nothing with it? or do you somehow get it to connect? i mean just having it as a presents on the computer to have something else connect seems odd to me but hell im down for whatever at this point. ima load it up now and try.
[SOLVED - It was a rubbish usb cable I was using]
Just got a s3 today after selling my htc one x and I want to root. I know hwp to do it but odin wont detect the phone. Tried restarting and using other usb ports but it still doesn't work. Not sure what the problem is.
Any help would be much appreciated. Cheers
Sent from my GT-I9300 using xda premium
cleancorekiller said:
Just got a s3 today after selling my htc one x and I want to root. I know hwp to do it but odin wont detect the phone. Tried restarting and using other usb ports but it still doesn't work. Not sure what the problem is.
Any help would be much appreciated. Cheers
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
are you into download mode first of all? if yes, then are the drivers installed on pc after connecting the phone in download mode? did you stop kies in the background? :good:
sriram231092 said:
are you into download mode first of all? if yes, then are the drivers installed on pc after connecting the phone in download mode? did you stop kies in the background? :good:
Click to expand...
Click to collapse
Yes, yes and no. I used download mode, odin and keis with my old samsung spica so im aware of the school boy errors. Csnt figure this out
Sent from my GT-I9300 using xda premium
cleancorekiller said:
Yes, yes and no. I used download mode, odin and keis with my old samsung spica so im aware of the school boy errors. Csnt figure this out
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
no for stopping kies in the background? if yes, then stop it. :good:
sriram231092 said:
no for stopping kies in the background? if yes, then stop it. :good:
Click to expand...
Click to collapse
I thought keis needed to run for the drivers. Even when I try to connect to keis it won't detect though
Sent from my GT-I9300 using xda premium
As @sriram231092 said correctly you have to stop ALL of kies related processes.
The kies is important so your OS will have the required drivers so the device could be recognized.
After installing kies, make sure you do a reboot and then, just before you start ODIN close all the kies related processes.
I also suggest you run ODIN as admin if you're running win 7 or above.
eytan123 said:
As @sriram231092 said correctly you have to stop ALL of kies related processes.
The kies is important so your OS will have the required drivers so the device could be recognized.
After installing kies, make sure you do a reboot and then, just before you start ODIN close all the kies related processes.
I also suggest you run ODIN as admin if you're running win 7 or above.
Click to expand...
Click to collapse
Cool. Ill try again
Sent from my GT-I9300 using xda premium
Still cant get it working
Sent from my GT-I9300 using xda premium
so try on another pc. if the problem still persists, that should be some kinda problem with the phone.
-------------------------------------
please let me know if i'm wrong and CLICK thanks if i help
SRIRAM
sent from my GT-I9300 running CM10.1 RC5 by Temasek
hmm, I think it might be the USB cable, it doesn't detect even when I try to use mass storage. Have ordered a new yesterday.
sriram231092 said:
so try on another pc. if the problem still persists, that should be some kinda problem with the phone.
-------------------------------------
please let me know if i'm wrong and CLICK thanks if i help
SRIRAM
sent from my GT-I9300 running CM10.1 RC5 by Temasek
Click to expand...
Click to collapse
Does device manager(DM) recognizes your device ? try to uninstall drivers from DM and re-connect your phone.
I also suggest using back door input for your usb.
eytan123 said:
Does device manager(DM) recognizes your device ? try to uninstall drivers from DM and re-connect your phone.
I also suggest using back door input for your usb.
Click to expand...
Click to collapse
Solved!!
It was the cable that is sh*t, not the phone or the computer.
Cheers guys!
Great news!
Enjoy your soon-to-be-rooted S3
cleancorekiller said:
hmm, I think it might be the USB cable, it doesn't detect even when I try to use mass storage. Have ordered a new yesterday.
Click to expand...
Click to collapse
Try to restart your pc/laptop? Take out the usb cable, restart windows, stop kies, start odin, plug in usb and it should say added.
Ps: you only needed kies to install your phone drivers, so make sure it has installed the drivers, you can check by normally starting your phone, plug in usb and see a popup msg.
Sent from my GT-I9300 using xda app-developers app
eytan123 said:
Great news!
Enjoy your soon-to-be-rooted S3
Click to expand...
Click to collapse
Cheers man!
Yeah, I am already loving it. Installed ARHD pretty much straight away.
I'm much preferring this phone to the one x I had, everything right down to the volume of the speaker I think is better.
Well it's great to hear
Actually I have 2 S3 at home the other one is my mom's, I've installed for her SAMMY based and I've got AOSP based kinda having the cake and eat it
eytan123 said:
Well it's great to hear
Actually I have 2 S3 at home the other one is my mom's, I've installed for her SAMMY based and I've got AOSP based kinda having the cake and eat it
Click to expand...
Click to collapse
Ahh, the best of both worlds! Haha
LOL yeah
a day after i rooted and flashed a rom on my l9, it just died, idk how. can't get into any kind of "mode". the strange thing is when i connect is via usb it tries to connect but a dialog box comes up in the bottom right saying "USB device not recognized" it makes the connect/disconnect sound over and over until i unplug it. Device manager doesn't show anything, it just keeps refreshing because the device is attempting to connect. I've tied different cables and different ports also, and no luck.
any help will be greatly appreciated, thanks
hachem28 said:
a day after i rooted and flashed a rom on my l9, it just died, idk how. can't get into any kind of "mode". the strange thing is when i connect is via usb it tries to connect but a dialog box comes up in the bottom right saying "USB device not recognized" it makes the connect/disconnect sound over and over until i unplug it. Device manager doesn't show anything, it just keeps refreshing because the device is attempting to connect. I've tied different cables and different ports also, and no luck.
any help will be greatly appreciated, thanks
Click to expand...
Click to collapse
Adb drivers? have you installed them?
kishandoshi said:
Adb drivers? have you installed them?
Click to expand...
Click to collapse
well i installed the original l9 drivers, is there specific adb drivers for it?
hachem28 said:
well i installed the original l9 drivers, is there specific adb drivers for it?
Click to expand...
Click to collapse
may b. well my story is. i had bricked my phone. installed the universal adb drivers as my phone doesnt have any driver released by company. and i did restored and flashed stock rom. hope it works for you.
kishandoshi said:
may b. well my story is. i had bricked my phone. installed the universal adb drivers as my phone doesnt have any driver released by company. and i did restored and flashed stock rom. hope it works for you.
Click to expand...
Click to collapse
Do you happen to have a link for the universal adb drivers?
hachem28 said:
Do you happen to have a link for the universal adb drivers?
Click to expand...
Click to collapse
adbdriver.com
hachem28 said:
Do you happen to have a link for the universal adb drivers?
Click to expand...
Click to collapse
More than likely your device is malfunctioned.
Sent from my LGMS769 using XDA Premium 4 mobile app