Hello.
Im using ripper rom on my s3 and everything on the phone was working ever since i got the rom(even going into reboots and recovery) but today i downloaded an update that i was supposed to flash and when i select reboot into recovery from the shutdown menu for some reason it went into download mode and i can't get it out of it =/
The only thing i did besides download the update(Which i didn't get to install/flash) was a backup with nandroid, but i did them before and restored from them and never had a problem.
Does anyone know what could it be and how to fix it? Do i really need to use the odin software? I have seen some threads that suggest a fix using odin and going back to stock, but i didn't even use odin on this rom (only once when i got the phone to put it back to stock and haven't used it again.
Thanks!
griffin_1 said:
Hello.
Im using ripper rom on my s3 and everything on the phone was working ever since i got the rom(even going into reboots and recovery) but today i downloaded an update that i was supposed to flash and when i select reboot into recovery from the shutdown menu for some reason it went into download mode and i can't get it out of it =/
The only thing i did besides download the update(Which i didn't get to install/flash) was a backup with nandroid, but i did them before and restored from them and never had a problem.
Does anyone know what could it be and how to fix it? Do i really need to use the odin software? I have seen some threads that suggest a fix using odin and going back to stock, but i didn't even use odin on this rom (only once when i got the phone to put it back to stock and haven't used it again.
Thanks!
Click to expand...
Click to collapse
Can u enter recovery?
Sent from my GT-I9300 using xda premium
REMOVE THE BATTRY AND WAIT FOR 5 mins aND then insert it !
I couldn't even get into recovery =/ i ended up restoring back to stock firmware via odin, then installed recovery and root.
I finally got the phone working again, but i have no idea why it decided to go on a "download mode" loop. Hopefully it won't happen again and if it does, i will try your advice to take the battery out for 5 minutes and see if works ( i did remove the battery but put it back right away to try to go into recovery, but with no luck).
Anyway, thanks for the help!
Related
Okay so my phone decided to do a force close on everything that i tried to do so I turned it off and tried to turn it back on again but all i was getting was the galaxy screen flash up and then it would turn black.
I flashed with Odin 3 times now and it says that it was successfull but when i go to turn the phone on it reboots and says that the data wipe has failed and then continues to flash the galaxy screen and then black. Can someone please help. I am a noob and haven't done anything but flash my phone.
The answers you are going to get are to odin back to stock, however ive had this problem and to get past it I had to do a factory wipe all data in the recovery menu then it booted. You lose all data. Before you do that try cycling the phone through restarts with battery pulls, I had another issue where doing this kicked me into normal boot after about 18 tries. I'm no expert but this is how I got fixed. Mine was a busy box issue it was never installed right
Sent from my SGH-T959 using XDA App
yeah, i agree w/ kcp about the battery pull... I would try this to see if you can get your system up and running, so that way you can dl Titatium Backup and Rom Manager. I had a problem on mine that would not let me reinstall packages and then it would never leave recovery, but after i pulled the battery, rebooted, and downloaded rom manager, i found that it was the same issue as kcp (busy box had to be updated). I don't understand why, after you re-flashed the Rom w/ odin it is not working.... did you flash 2.1 or 2.2? Remember, after you flash with odin you need to wipe data and chached memory, then reboot (maybe a battery pull). Try to give more info about exactly how you flashed w/ odin.
Also my titanium says it downloads busy box but doesn't had to go get it from the market and put it in the x bin you might want to do the same when it boots to be safe.
Sent from my SGH-T959 using XDA App
in_dmand said:
yeah, i agree w/ kcp about the battery pull... I would try this to see if you can get your system up and running, so that way you can dl Titatium Backup and Rom Manager. I had a problem on mine that would not let me reinstall packages and then it would never leave recovery, but after i pulled the battery, rebooted, and downloaded rom manager, i found that it was the same issue as kcp (busy box had to be updated). I don't understand why, after you re-flashed the Rom w/ odin it is not working.... did you flash 2.1 or 2.2? Remember, after you flash with odin you need to wipe data and chached memory, then reboot (maybe a battery pull). Try to give more info about exactly how you flashed w/ odin.
Click to expand...
Click to collapse
How do i know if i flashed with 2.1 or 2.2? How do you wipe data and cached memory? I turned it back on after i flashed and it showed that it was rebooting and wiped the cached memory but the data wipe failed.
also, my phone is not unlocked
Update: I flashed with 2.2 but I did not know that it was for tmobile. I am with bell. Now i can't get it to go into download mode so that I can flash with the right rom. It also won't charge when plugged in. Am i going to have to just get a new phone?
anything on this yet? mine is cycling aswell and cant get it into DL mode ;(
Hi all
I'm not new to flashing but I'm new to flashing cm7.
I odin back to stock jfd eclair. Root and Install CWM 2.xxx. I downloaded the stable cm7 and I started flashing. (after I wipe data/cache of course)
IN recovery, it said finding package, opening package, then my phone processed a series of lines and reboot automatically. On the startup, it says VIBRANT SAMSUNG, then GALAXY S CYANOGEN(mod) then the same recovery screen with many lines. It moved too fast into another reboot I couldn't read what was on the screen. And it kept doing this for quite 10 mins now.
Is it normal? if not, what did I do wrong? I can get into download mode and odin back to stock but I did it last night and I couldn't think what i did wrong.
Please help!
Hmmmm..... seems a bit wierd, try going into recovery and wiping and reinstalling with a new download.
Sent from my Nexus S 4G using XDA App
stumpyz9 said:
Hmmmm..... seems a bit wierd, try going into recovery and wiping and reinstalling with a new download.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
No i don't think its a bad dl. I checked md5. I'm odin back to stock again now.
wavestar92 said:
No i don't think its a bad dl. I checked md5. I'm odin back to stock again now.
Click to expand...
Click to collapse
Try reflashing cwm when your rooted, may have not flashed right
Sent from my Gewgle Phone via XDA App
This happened to me also, I went directly back to recovery, 3 button, and reflashed. Worked the second flash for some reason.
Thanks. I turn it off, get into recovery again, and re flash it successfully
Same exact thing happened. I have no idea how many time I odened back to stock trying to figure it out.
I did as you guys said, as soon as that loop began, pulled the battery and got back into recovery. flashed again and worked just fine!
same thing happened to me...i got back into recovery...i noticed cwm updated to 5.0.2.8 then i reflashed and all good...when i tried to flash at first. cwm was 2.5 ..maybe thats the issued it wont flash on that...has to be cwm 5.0
anyway getting ready enjoy some cm7 on my vibrant...
Hello,
I didn't do the system update before rooting the device and perhaps I should have, with the epic, touch, and note2 it was a bad idea to do system updates so I just skipped it. I rooted the phone and flashed TWRP on it without issue using the tools from galaxynote3root.com's. I then made a backup of the rom using TWRP. I then went to flash Galaxy-S-fre3-MD4FirmwareModemAIO.zip through TWRP which I think is what killed it but i'm not 100% certain, I just know it errored out / wouldn't let me flash the zip. I tried restoring from the TWRP with the backup I made, no luck.
I'm now stuck unable to get anything to boot stable, it always shows "Process system isn't responding" and dies shortly thereafter. I can occasionally get to the point where it sees icons but usually it just reboots. I think I might have nuked the modem but I can't seem to find a radio/modem thread for the sprint model and I don't know if the modems from the GSM thread are safe for the Sprint.
I have tried flashing N900PVPUBMI3_N900PSPTBMI3_N900PVPUBMI3_HOME.tar.md5 on it through Odin with the auto reboot on and off without luck.
hmm
Trahloc said:
Hello,
I didn't do the system update before rooting the device and perhaps I should have, with the epic, touch, and note2 it was a bad idea to do system updates so I just skipped it. I rooted the phone and flashed TWRP on it without issue using the tools from galaxynote3root.com's. I then made a backup of the rom using TWRP. I then went to flash Galaxy-S-fre3-MD4FirmwareModemAIO.zip through TWRP which I think is what killed it but i'm not 100% certain, I just know it errored out / wouldn't let me flash the zip. I tried restoring from the TWRP with the backup I made, no luck.
I'm now stuck unable to get anything to boot stable, it always shows "Process system isn't responding" and dies shortly thereafter. I can occasionally get to the point where it sees icons but usually it just reboots. I think I might have nuked the modem but I can't seem to find a radio/modem thread for the sprint model and I don't know if the modems from the GSM thread are safe for the Sprint.
I have tried flashing N900PVPUBMI3_N900PSPTBMI3_N900PVPUBMI3_HOME.tar.md5 on it through Odin with the auto reboot on and off without luck.
Click to expand...
Click to collapse
flash the odin tar reboot into recovery wipe data and cache this should get you up and running
humdrum2009 said:
flash the odin tar reboot into recovery wipe data and cache this should get you up and running
Click to expand...
Click to collapse
Ah forgot to mention that I tried that, no joy. It goes through the caching of apps, sits forever at 'finalizing boot' and then goes into the reboot cycle.
Restore doesn't work and once u do that it borks your file system. Your phone is bricked and using Odin to go back to stock will not work. You can try but u need to get ur phone replaced and hopefully sprint doesn't look at your knox counter if not u got ur self a $700 paperweight
Sent from my SM-N900P using xda app-developers app
phyba said:
Restore doesn't work and once u do that it borks your file system. Your phone is bricked and using Odin to go back to stock will not work. You can try but u need to get ur phone replaced and hopefully sprint doesn't look at your knox counter if not u got ur self a $700 paperweight
Sent from my SM-N900P using xda app-developers app
Click to expand...
Click to collapse
Mine did this before I even dared tried a restore...but you are right, once it happens theres no way to get it back up and running...Return it quick and just play dumb..
Here goes, hopefully someone can help!
Ive installed a fair few roms on my phone and never had any issue, maybe this explains the complacency.
After updating to CWM recovery -6.0.4.7 I get stuck on my bootscreen, only seeing "Samsung galaxy I9100P" , ive been putting I9100 roms on it and losing NFC functionality for a while.
I went to update to the newest CM-11 nightly and read I needed to update CWM-recovery first. So did that, rebooted phone as instructed after installing new CWMr and nothing. Just stuck on I9100 screen.
No way to get into recovery mode, the only bright side I have found is I can boot into ODIN download mode. So what would be my next steps anyone?
Flash stock rom. or flash a kernel to get a working recovery bk with odin.
Sent from my GT-I9300 using xda premium
andrewwright said:
Flash stock rom. or flash a kernel to get a working recovery bk with odin.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
From a dig through the forums it sounds like NAND rw corruption?
I wouldn't be calling it that just yet. Unless you'd like to pay for a motherboard replacement ? Most of these are recoverable.
Used ODIN and flashed a new kernel, still on the boot screen, except now I have the yellow exclamation mark. Now to, Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.. this day is not going well..
Fingers crossed, flashed 3 or 4 kernels before one worked and allowed me into recovery mode. Trying to restore back to my backup from this morning. Heres hoping! :good:
Worked perfectly, the first thing I did was retry the initial task which was what got me stuck, currently waiting on CM-11's initial boot up after a successful install Thanks for the calming responses!
I'm having a bit of an issue with my phone.
I was running alliance ROM build 30 since it was released. A week or so ago i wanted to try cm12. So I flashed octos.
It flashed fine and it runs fine, but I still can't seem to "get into" asop. Just seem to keep wanting touch whiz again.
So I went to restore my backup of alliance and it fails right away. I'm using philz recovery. I've also tried twrp and no change.
So I went to do a clean install of alliance and it flashed fine, but it won't boot. It hangs at the boot screen.
So I tried to flash another touch whiz ROM and it did the same thing. Just won't boot.
But it does not boot loop, it justs gets to the boot animation and stays there until I take out the battery.
So far I'm able to get any asop ROM to work fine, but only one touchwhiz. And even then the touchwhiz ROM was really slow and force closed apps a lot (maybe the ROM, maybe not, I'm not sure).
So any help is greatly appreciated.
Odin back to stock?
Haven't tried that yet.
I assume I would have to use the MC3 file right?
So I can re root and unlock again.
It appears that there isnt any files that I can download.
Everything I can find is no longer available
Well I found the odin file.
Ran it now my phone is really screwed. It said it ran successfully but when it went to boot, it just flashes the galaxy note 2 screen.
Now every time I try to flash it in Odin it fails right away.
Bump. I tried to run the odin file again and it still fails.
Im back om my old phone for now so i have some time to figure this out.
Sent from my DROIDX using XDA Free mobile app
droidx2.3.3 said:
Bump. I tried to run the odin file again and it still fails.
Im back om my old phone for now so i have some time to figure this out.
Sent from my DROIDX using XDA Free mobile app
Click to expand...
Click to collapse
have you tried to boot into stock recovery and wipe data/cache?
I tried but it wont boot into recovery. The only thing kt will so is flash the boot screen or go into download mode
Sent from my DROIDX using XDA Free mobile app
You should have just used a custom kernel. It would boot with AGNI fine. My phone is doing the same thing yours was, IE not booting touchwiz roms. AGNI always works to have it boot correctly. Now, though, you have a different problem which is you probably flashed the wrong ODIN file and might have bricked the phone.
I've used this odin file before with success though.
I couldn't find any files to download at first, but then I remembered that I had them on my computer still from a long time ago.
I figured out if you load MochaDrizzle ROM, then after booted, download the app called FOLDERMOUNT. Run it with root access and it will 'fix' a broken permission. Next load Int-SDCard Writer and hit the Download (extra fix) button and then Fix Me buttons. THen reboot. Now you should be able to re-load stock roms and have them boot.
SHEESH!