Related
Hello everybody
The new ICS update for the ROGERS EVO 3D just came out yesterday, so I restored my phone to the original firmware (via restoring the backup I did in the recovery) and then proceeded to download the OTA update. After it finished, the phone rebooted into the recovery (i have 4-ext touch recovery) and started installing. After it finished, the phone rebooted and then got stuck on the white HTC screen. I managed to enter the recovery again and restore the original firmware again. What is that I'm doing wrong here? Here is some helpful info:
Rogers EVO 3D, GSM version
Unlocked bootloader (HTCDEV method), S-ON
carrier unlocked
HBOOT 1.49.0008
OS is rooted
I'm in the same boat but I'm not able to do a recovery. I went through the update process and when the phone rebooted it got stuck on the white htc screen. I can get it into the bootloader menu but when i choose recovery it starts but then i get an error with a pic of the device and the red yield sign. If i choose factory reset it just gets stuck at the white htc. I read some other posts and I saw that having an unlocked bootloader may cause issues with updates so that may be your issue as for me, I'm not sure what I can do. I may just need the actual update file to redo the update but I'm not sure where to find it.
Same here, but I don't get half way through the ota update before I see the red triangle and exclamation mark. Phone will boot into stock recovery (which I would assume you need instead of modded recovery) and the update starts, but doesn't complete. I pull the battery and the phone boots up normally. Just can't seem to get through the update. Could be something to do with being s-off I would guess.
EJ
madmajd said:
Hello everybody
The new ICS update for the ROGERS EVO 3D just came out yesterday, so I restored my phone to the original firmware (via restoring the backup I did in the recovery) and then proceeded to download the OTA update. After it finished, the phone rebooted into the recovery (i have 4-ext touch recovery) and started installing. After it finished, the phone rebooted and then got stuck on the white HTC screen. I managed to enter the recovery again and restore the original firmware again. What is that I'm doing wrong here? Here is some helpful info:
Rogers EVO 3D, GSM version
Unlocked bootloader (HTCDEV method), S-ON
carrier unlocked
HBOOT 1.49.0008
OS is rooted
Click to expand...
Click to collapse
Same problem but whit s-off
I have been predicting that this would happen... ICS failures with non-standard HBOOTs. Good luck.
Probably will have to wait for an RUU or custom.
I'd recommend using the GB ruu to get you back to full stock. Always found Rogers ota updates (possibly all carriers?) won't install if you're rooted or using a custom recovery.
I had to install the ruu via renaming the rom.zip to PG86IMG.zip and copying it to the sd card so that the bootloader would auto flash it. Running the ruu exe tossed up all kinds of errors.
It will put everything back to Rogers stock. After that just setup wifi and do the 2 Rogers OTA updates.
Once in ICS, it's easy peasy to get recovery and root back.
Also, for what it's worth, Go Backup is awesome for going rom to rom and not needing a full backup. Use it on rooted rom, then use it to restore after rooting new rom. Will do all your apk's and everything.
1st post here after years of lurking. Yay.
wikkid said:
I'd recommend using the GB ruu to get you back to full stock. Always found Rogers ota updates (possibly all carriers?) won't install if you're rooted or using a custom recovery.
I had to install the ruu via renaming the rom.zip to PG86IMG.zip and copying it to the sd card so that the bootloader would auto flash it. Running the ruu exe tossed up all kinds of errors.
It will put everything back to Rogers stock. After that just setup wifi and do the 2 Rogers OTA updates.
Once in ICS, it's easy peasy to get recovery and root back.
Also, for what it's worth, Go Backup is awesome for going rom to rom and not needing a full backup. Use it on rooted rom, then use it to restore after rooting new rom. Will do all your apk's and everything.
1st post here after years of lurking. Yay.
Click to expand...
Click to collapse
Alright thanks a lot
Just an update on what I did. I was able to reload the stock gb rom for rogers using the exe file, then I went through the 2 updates that came up when checking and ics is now up and running on my phone. However in my attempts of trying to fix the original problem, I managed to re-lock my bootloader before flashing to stock rom and I had s-on the whole time. hope this help.
i switched to stock like.. a week back?
jus got ota on 4th
i WAS rooted and using juopunutbear's hboot *u can jus get the hboot from their website*
so i jus flashed back stock recovery.. and updated.. and success.. lost root though.. and i was back to stock bootloader..
used the PG86IMG with juopunutbear's bootloader and 4ext recovery.. and flashed cwm supersu.. v0.91 i think.. i dunno.. latest one.. and bam.. im on stock.. rooted.. and works perfectly..
Possible sollution
Maybe try flashing one of the customized ROMs that are based on the latest OTA update. I'm sure Anryl's newest rom is blazing-fast and stable. You can find it in the gsm android development forum and flash it via recovery. Make sure you have the latest 4ext recovery installed, though.
where can a i find that stock rogers rom i modified mine and that might be the reason i get a security failure in hboot. s is on. when i run the ruu file in windows to downgrade i get error 155. when i run the the update from about phone. it locks up with blue android guy and yellow exclamation mark. i remove the battery and she boots fine with no changes.
I am trying to do same. Get stuck on HTC screen. I have S-ON. Was on cobra 2.4 prior.
If anyone can give details on how to fix it, it would be great! Please no saying "install exe". I need to know which exe etc.
just wanted to tell everyone that in order for the ota update to work properly, you need to be running stock unrooted firmware with a locked bootloader. Just relock your bootloader, reinstall the stock firmware, upgrade to ics via ota, then re-unlock and re-root.
Hi
I have a HTC EVO 3D from Rogers that was got messed up during changing networks... rooted the phone for no apparent reason... to now get a update for it for ics from the provider and it bricked the phone.
It's stuck at HTC boot screen, can get fastboot USB from bootloader. recovery gets a ! in a triangle and factory reset doesn't work, freezes at splash screen after restarting the phone. Was stupid not making a backup or searching for programs to back it up before I went ahead and clicked update
It has HTC boot-loader 1.49 s-on but is rooted.
I am looking for clear(fix my evo for dummies) step by step instructions with correct installation for my model of phone, HTC EVO 3D Rogers GSM, or anything that could replace the os to get my phone to be useful again I'm currently using my backup phone a HTC G1 HTC ftw
Try kingcobra's rom, ota from rogers will not boot due to the fact that your phone is rooted, kingcobra's rom is based on rogers ota, flash it and leave it.
Sent from my HTC EVO 3D X515m using xda premium
Davideichler7 said:
Hi
I have a HTC EVO 3D from Rogers that was got messed up during changing networks... rooted the phone for no apparent reason... to now get a update for it for ics from the provider and it bricked the phone.
It's stuck at HTC boot screen, can get fastboot USB from bootloader. recovery gets a ! in a triangle and factory reset doesn't work, freezes at splash screen after restarting the phone. Was stupid not making a backup or searching for programs to back it up before I went ahead and clicked update
It has HTC boot-loader 1.49 s-on but is rooted.
I am looking for clear(fix my evo for dummies) step by step instructions with correct installation for my model of phone, HTC EVO 3D Rogers GSM, or anything that could replace the os to get my phone to be useful again I'm currently using my backup phone a HTC G1 HTC ftw
Click to expand...
Click to collapse
Go to the gsm development forum and download the RUU for the phone, and restore it to stock unrooted OS. Before you do that though, make sure that your phone's BOOTLOADER IS LOCKED. Look up how to re-lock your bootloader. After you relock your bootloader, you can proceed with restoring the phone.
Soooo.... basically, what I'm getting from this is, if you like having a locked bootloader, CWM and root, don't bother trying to install this OTA update because it's a headache. Agree?
The phone's not mine, it's my wife's, and she doesn't want anything special or like the idea of me messing around in her phone.
I was about to install this late last night, just about to hit that button, then I thought, "what about the bootloader? what about root? what about the fact that it's now unlocked and being used on a carrier other than Rogers?"
K… Bought a HTC Amaze 4G through Telus. I travel a lot and need to be able charge the phone on the road so i was using any charger that would fit in the port to charge the device. This gave my serious battery life problems. Brought the phone back to Telus. They gave me a new battery, but i had the same results.
So I,
- Unlocked the bootloader (through HTC.Dev)
- Rooted the phone with HTC Super Tool V3
- Installed Battery Cal App from the market place
- Bumped charged to battery until i figured it was full
- Then reset the Battery Cal file
Once i tested the battery and found it to be like new i,
- Flashed CWM recovery and backed up the phone.
All was well till Telus OTA'ed ICS. I tried to update and could not. I read on all the XDA forums you cannot OTA update with root/custom recovery/blah, blah, blah….
I tried to,
- Unroot with HTC Super Tool V3. Nope
- Unroot with ADB. Nope
- Re-locked the bootloader and unlocked a couple of times trying different things. At this point the phone still worked as a phone. Just would not OTA update.
So i decided to try S-Off with Hasoon's Amaze S-off All In One Kit V1.0. Then maybe flash Energy Rom. I tried for a couple of days. First i had ADB issues. Wiped laptop. New ADB. Then it kept giving me Errorcode: 66732337 ErrorMsg: Still sober. I could not boot the phone anymore. Just to Hboot. After a weekend of this i kept reading and found to get back to stock all i had to do was flash RUU through Hboot. Then i could get the OTA. So I,
- Found RUU_Ruby_TELUS_WWE_1.41.661.3_Radio_1.08.550L.19DC_30.66.550L.08D_release_222694_signed.exe
- Zipped it and renamed it PH85DIAG.zip
- Put it on root of SD card
- Booted in Hboot
Then the phone,
- Loaded the .zip (blue bar on the right)
- Checked the .zip (orange bar on the right)
But it does not return to stock. Then i read this "return to stock" method only works if you are using stock recovery. So i,
- found stock recovery from Telus-1.41-Restore-Flasher
- flash recovery with Fastboot
But the phone still does not return to stock.
At this point the phone only boots to Hboot. It says,
*** RELOCKED ***
*** Security Warning ***
Ruby PVT SHIP S-ON RL
HBOOT-1.90.0006
eMMC-boot
I just want to return to stock and get the Telus OTA. I don't know what i am doing wrong. Do i need lock the bootloader not relock the bootloader. Do i have the wrong Hboot or something.
THX
Have you tried Hasoon's All-in-one Toolkit?
When using the ruu signed exe file, you do not zip it and rename it to anything, simple boot the device into hboot, select fastboot, plug in the usb cable and run the ruu exe file on your pc, follow all on screen instructions then let it update the device, once complete, let it boot full, then check for software update via settings to install the ICS ota from TELUS.
kered424 said:
Have you tried Hasoon's All-in-one Toolkit?
Click to expand...
Click to collapse
I have Hasoon's HTC Amaze All-In-One Kit V3.2. How do i use it to return to stock?
Dark Nightmare said:
When using the ruu signed exe file, you do not zip it and rename it to anything, simple boot the device into hboot, select fastboot, plug in the usb cable and run the ruu exe file on your pc, follow all on screen instructions then let it update the device, once complete, let it boot full, then check for software update via settings to install the ICS ota from TELUS.
Click to expand...
Click to collapse
See.... now i feel like an idiot!!! Ran Telus RUU .exe and it worked like a charm. Anyway, THX guys!!!:good::good: Got my OTA.
I have The sprint CDMA EVO 3D it was running the latest version of gingerbread and i had the bootloader unlocked running Hboot 1.50. I had team win recover version 2.0 installed as my recovery on the phone. All of the rest on the phone was all left at stock so there were no extra roms, it was the original HTC rom on the phone. So i was trying to flash the update through Teamwin 2.0 and it gave an error message after it unpacked everything saying "E: unknown command [firmware]". So i rebboted the system and now it will not even go past the HTC bootloader but it will still boot into fastboot and recovery. Is there anything i can do to get my phone back or what should i do!?!? Thanks for all your help!
jerwolfe said:
I have The sprint CDMA EVO 3D it was running the latest version of gingerbread and i had the bootloader unlocked running Hboot 1.50. I had team win recover version 2.0 installed as my recovery on the phone. All of the rest on the phone was all left at stock so there were no extra roms, it was the original HTC rom on the phone. So i was trying to flash the update through Teamwin 2.0 and it gave an error message after it unpacked everything saying "E: unknown command [firmware]". So i rebboted the system and now it will not even go past the HTC bootloader but it will still boot into fastboot and recovery. Is there anything i can do to get my phone back or what should i do!?!? Thanks for all your help!
Click to expand...
Click to collapse
I really don't know how else to say this, DON'T TAKE OTA'S IF YOU'RE ROOTED! OR UNLOCKED! lmao. you need to download the CD. http://forum.xda-developers.com/showthread.php?t=1563342
Since you can get into recovery, try flashing a different rooted ROM.
Save the Drama for your Mama with Tapatalk 2
If you can't get into fastboot or recovery, then I think your on your way to a sticky at the top of the development thread about being able to recover your phone.
I would also remove the battery for 10 min, hold down the power button. Reinsert battery, try to get into hboot and recovery and flash a backup.
Okay, so I'm in a bit of a bind. I'm S-OFF, and I tried updating to the global leak and it seems I've lost boot and recovery. Everytime I boot it goes through the splash screen and then a black screen with the phone and green update symbol, then it turns to a red triangle and exclamation mark. any help would be greatly appreciated. I'm fairly experienced and everything i've tried has failed. I tried going into hboot and flashing the PH98IMG again. It took, but still the same result. I tried flashing the recovery in fastboot but it continues to fail, and I also tried flashing my boot.img but it also failed. Any ideas?
tomtripp21 said:
Okay, so I'm in a bit of a bind. I'm S-OFF, and I tried updating to the global leak and it seems I've lost boot and recovery. Everytime I boot it goes through the splash screen and then a black screen with the phone and green update symbol, then it turns to a red triangle and exclamation mark. any help would be greatly appreciated. I'm fairly experienced and everything i've tried has failed. I tried going into hboot and flashing the PH98IMG again. It took, but still the same result. I tried flashing the recovery in fastboot but it continues to fail, and I also tried flashing my boot.img but it also failed. Any ideas?
Click to expand...
Click to collapse
unlock the bootloader and flash a recovery. you need to unlock since you dont have eng commands.
btw this belongs in q&a
antp121 said:
unlock the bootloader and flash a recovery. you need to unlock since you dont have eng commands.
btw this belongs in q&a
Click to expand...
Click to collapse
Thanks I'll give that a try. Will the firmware and ROM still be in place? Will I have do the update again? BTW Sorry for posting it in the wrong section..
tomtripp21 said:
Thanks I'll give that a try. Will the firmware and ROM still be in place? Will I have do the update again? BTW Sorry for posting it in the wrong section..
Click to expand...
Click to collapse
Its OK. And once you unlock, it'll reboot. Then you just go back into the boot loader and flash a recovery with fast boot.
Sent from my aokp_tenderloin using Tapatalk 2
So got the recovery flashed, but now it only boots into the recovery.
tomtripp21 said:
So got the recovery flashed, but now it only boots into the recovery.
Click to expand...
Click to collapse
Did you try flashig a rom?
Sent from my aokp_tenderloin using Tapatalk 2
i tried to restore my backup that didn't work, I haven't tried a new ROM yet. I'll try that and get back to you. Thanks again for all your help.
antp121 said:
Did you try flashig a rom?
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Tried flashing a ROM, the stock deodexed rooted 4.03.605.02. Still boots to recovery...
tomtripp21 said:
Tried flashing a ROM, the stock deodexed rooted 4.03.605.02. Still boots to recovery...
Click to expand...
Click to collapse
You need to use interface to fastboot boot.img then run firmware update for old firmware n old CWR. BASICALLY GO BACK TO STOCK REZOUND N START THE WHOLE PROCESS OVER LIKE DAY 1!
Good news is you don't need to do the wire trick again. Your phone crashed during the firmware upgrade now its stuck in limbo n doesn't know how to handle the 2 sets of hardware commands its receiving from the CMOS.
[Q] Can only get into recovery after attempting Juopunutbear S-OFF
I wanted to S-OFF after being stock locked, with the OTA ICS update. I performed HTC dev unlock successfully. After that, I may have gone wrong during one of several steps.
-Pushed AmonRa recovery 3.15 to my phone (seemed to be successful)
-Flashed ICE-EnableRoot.img (got an error message saying it was unsuccessful, but when I rebooted my phone, SuperUser was installed).
-Flashed vigorOTAStockRooted.zip (because I wanted to try the S-OFF method from stock GB rom)
-Ran HTC Rezound S-OFF Kit By Hasoon2000
-Made sure HTC Drivers were installed
-Enabled USB Debugging
-Put in blank SD Card
-Run Juopunutbear v.6 If You Are On Gingerbread
After running Juopunutbear v.6 for Gingerbread, my phone screen went blank and HTC's splash screen came up momentarily, and then my phone screen went dark. The cmd box that popped up then gave me an error message saying I had to install the HTC Drivers. I went to HTC's website to download the drivers. When I tried to install them, I was told they were already installed.
I can reboot my phone into Hboot and AmonRa recovery and I can do anything from there. But when I try to start my phone, I get the HTC splash screen and then black screen. The orange LED lights up when my phone is powered off and plugged in via USB. When I try to boot from Hboot, I either get a static HTC splash screen or splash screen going to a black screen.
This is what my Hboot screen reads:
*** TAMPERED ***
*** UNLOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
Open DSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012,16:47:46
Any advise would be greatly appreciated! Thank you!
jtayag said:
I wanted to S-OFF after being stock locked, with the OTA ICS update. I performed HTC dev unlock successfully. After that, I may have gone wrong during one of several steps.
-Pushed AmonRa recovery 3.15 to my phone (seemed to be successful)
-Flashed ICE-EnableRoot.img (got an error message saying it was unsuccessful, but when I rebooted my phone, SuperUser was installed).
-Flashed vigorOTAStockRooted.zip (because I wanted to try the S-OFF method from stock GB rom)
-Ran HTC Rezound S-OFF Kit By Hasoon2000
-Made sure HTC Drivers were installed
-Enabled USB Debugging
-Put in blank SD Card
-Run Juopunutbear v.6 If You Are On Gingerbread
After running Juopunutbear v.6 for Gingerbread, my phone screen went blank and HTC's splash screen came up momentarily, and then my phone screen went dark. The cmd box that popped up then gave me an error message saying I had to install the HTC Drivers. I went to HTC's website to download the drivers. When I tried to install them, I was told they were already installed.
I can reboot my phone into Hboot and AmonRa recovery and I can do anything from there. But when I try to start my phone, I get the HTC splash screen and then black screen. The orange LED lights up when my phone is powered off and plugged in via USB. When I try to boot from Hboot, I either get a static HTC splash screen or splash screen going to a black screen.
This is what my Hboot screen reads:
*** TAMPERED ***
*** UNLOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
Open DSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012,16:47:46
Any advise would be greatly appreciated! Thank you!
Click to expand...
Click to collapse
For starters, you are on ics firmware so you should run the ics version of juopunutbear. I suggest flashing a rooted Rom based on the ota and then try again.
Sent from my ADR6425LVW using Tapatalk 2
topgun1953 said:
For starters, you are on ics firmware so you should run the ics version of juopunutbear. I suggest flashing a rooted Rom based on the ota and then try again.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I successfully flashed one of the stock ICS ROMs! What got me all confused to begin with was the prerequisite that I had to be on a stock Gingerbread ROM or the 3.14.605.5 ICS leak. That's why I tried flashing the original Vigor GB ROM on my phone. I still want to get S-OFF, but I need to read the instructions more carefully. Thanks for your help!
dragonstalker said:
You need to use interface to fastboot boot.img then run firmware update for old firmware n old CWR. BASICALLY GO BACK TO STOCK REZOUND N START THE WHOLE PROCESS OVER LIKE DAY 1!
Good news is you don't need to do the wire trick again. Your phone crashed during the firmware upgrade now its stuck in limbo n doesn't know how to handle the 2 sets of hardware commands its receiving from the CMOS.
Click to expand...
Click to collapse
So I just need to flash my backed up boot.img, and then flash the 3.14.605.12 RUU? Then re-root and retry the OTA Global Update?
tomtripp21 said:
So I just need to flash my backed up boot.img, and then flash the 3.14.605.12 RUU? Then re-root and retry the OTA Global Update?
Click to expand...
Click to collapse
pretty much. From looking at everything looks like you are on ICS, but its not letting you reprogram. usually happens when an update fails. When you run Juonobear and run the ics upgrade over again, it should reboot like 3 or 4 times. Sounds like you never let the process finish. Final note, i'm not sure where you got your firmware from, but your radios do not look familiar. Not saying they are wrong, just not radio's i've ever seen flashed. BUT, I don't usually change radio's unless there is a huge need for it. you should be on radio's 10r/08r that come with the original ICS firmware update. I'll watch the thread throughout the day to lend support where I can. Hope this helps.
dragonstalker said:
pretty much. From looking at everything looks like you are on ICS, but its not letting you reprogram. usually happens when an update fails. When you run Juonobear and run the ics upgrade over again, it should reboot like 3 or 4 times. Sounds like you never let the process finish. Final note, i'm not sure where you got your firmware from, but your radios do not look familiar. Not saying they are wrong, just not radio's i've ever seen flashed. BUT, I don't usually change radio's unless there is a huge need for it. you should be on radio's 10r/08r that come with the original ICS firmware update. I'll watch the thread throughout the day to lend support where I can. Hope this helps.
Click to expand...
Click to collapse
Now I'm a little confused, sorry. I need to run the juopunutbear program again? My radios are 2.22.10.0801r/2.22.10.0803r, Hboot 2.27. I'm downloading the .12 RUU from Android Police. I've tried re-flashing the boot.img from my nand backup, but it keeps saying:
C:\mini-adb_vigor>fastboot flash boot.img
unknown partition 'boot.img'
error: cannot determine image filename for 'boot.img'
edit: I fixed the flash, I forgot to add the partition in the command, duh... So I flashed my backed up boot.img, now I just need to flash the .12 RUU?
I have the backup img in the file where I have fastboot, adb, etc.. What am I doing wrong?
tomtripp21 said:
Now I'm a little confused, sorry. I need to run the juopunutbear program again? My radios are 2.22.10.0801r/2.22.10.0803r, Hboot 2.27. I'm downloading the .12 RUU from Android Police. I've tried re-flashing the boot.img from my nand backup, but it keeps saying:
C:\mini-adb_vigor>fastboot flash boot.img
unknown partition 'boot.img'
error: cannot determine image filename for 'boot.img'
edit: I fixed the flash, I forgot to add the partition in the command, duh... So I flashed my backed up boot.img, now I just need to flash the .12 RUU?
I have the backup img in the file where I have fastboot, adb, etc.. What am I doing wrong?
Click to expand...
Click to collapse
I have now tried to flash the .12 RUU in Hboot but it will not flash it, probably because my firmware is newer right? Back to the drawing board....
Still to no avail I am getting nowhere. I flashed the stock recovery and did a factory reset from Hboot. Nothing, I have tried flashing the newest RUU, nothing, I'm flashed back to ra-recovery. Can anybody give me a solution step by step to get a ROM loaded and booting?
Well I finally got it up and working. I loaded the old firmware and was able to restore by backup. Thanks to all who chimed in with helpful advice. I'm hesitant to retry the Global update, but I might go ahead and give it another shot.
Glad you figured to restore the firmware. It's not hard to flash the global. Run the firmware, then run the recovery then flash Rom. Do it right in that order n you don't have any issues. Use 2 sdcards if you need to because the firmware upgrade won't delete the ph98 off your card. You will need to do it manually.
Sent from ICS REZOUND S-OFF
Hi Xda Community,
I was having an issue with hboot where it would lead to a screen with a phone image and a red triangle caution whenever i tried to enter recovery.
Since that issue I have used hansoon2000's all in one vivid toolkit to unlock the boot loader and flash TWRP 2.4 on my phone.
Now using Twrp i am able to use recovery etc. I then attempted to continue using hansoon2000's all in one vivid toolkit to flash my Stock Velocity RUU back
onto my phone. I relocked the phone prior and attempted the flash which appeared to be working and then resulted in the following error:
(remote: 90 hboot pre-update! please flush image again immediately)
I am not sure what i am doing wrong, but i have a feeling the error is related to my hboot issue. I would just like to flash my Stock Telstra 4g velocity RUU
back onto my phone. Does anyone know how i can go about doing this?
My Goals (simplified):
- Make HBOOT fully functional again / or recover it.
- Help to Flash my Stock RUU back onto my phone.
- Reset and make phone as if were stock, without these issues.
Any help or advice would be absolutely amazing as this has been bothering me for days, and I have a partially unusable phone.
I fixed my issues, by downloading the stock telstra velocity RUU and renaming it and flashing via hboot. This thread may be closed.