Related
I flashed custom recovery image successfully and after that, when phone has to restart, it just stuck at LG logo.
When I tried to enter in custom recovery menu, but it shows only LG logo.
I tried to connect with PC, but it was unsuccessfully. The PC doesn't recognize the device. (nothing happens).
Can anyone help me?
This happened to me also. I solved it like this:
First thing to do is get sure the LG drivers are installed ( there is a topic in the forum on this also).
Install KDZ ( serch in the forum and download it)
Download a room ( stock or not )
Flash the phone with KDZ ( after the drivers have been installed the phone should be detected on the pc.
After flashing if it does not start up do not fear, get the battery out, re install the battery and do a hard reset power+home+volume down buttons pressed at the same time and it should work.
If its your first time install Stock GB 20E as it is an open room, if not new to this I would suggest CM7.
Hope it helped
Regards
But the PC doesn't recognize the phone.
Here is the log from KDZ:
[R&D Test Tools Log File]
23:47:37 : Launching SW update
23:47:37 : Unpacking KDZ
23:47:39 : KDZ file extraced
23:47:40 : Files were extracted.
23:47:40 : LGMobileDL Load.
23:47:40 : Port = -1
23:47:40 : Connecting to phone
23:47:40 : PHONE WAS NOT FOUND!
23:47:42 : ===FINISHED===
Click to expand...
Click to collapse
How should I solve this problem? :/
bondzi said:
But the PC doesn't recognize the phone.
Here is the log from KDZ:
How should I solve this problem? :/
Click to expand...
Click to collapse
I had this same issue too, do not worry.
Keep your phone plugged into your computer, and go to Start > Control Panel > System > Hardware > Device Manager > Modems and disable the LG modem.
I am on Windows XP, so it may not be the same steps, but the point is that you have to disable the LG modem in Device Manager.
I had the same problem as well at one point. What operating system are you running on your computer?
I had the same issue, but I could not find the LG modem to disable it, it was just that windows was not detecting my phone at all, or using the drivers I had installed for my P500 to figure out what was connected to my laptop. Bricked phone after a failed ROM flash. Reinstallation of USB drivers for my phone failed to do anything.
Have you used LG Mobile update at all? I got all my drivers through it, rather than useless PC Suite 4.
Download it through HERE
Here's what I did to rectify it (Running windows vista):
DO NOT PLUG IN YOUR PHONE UNTIL STEP 3!
1. Went to system restore in windows(you'll find it under Backup and Restore in the Control Panel) and restore your computer to a state before installing any drivers for your phone.
2. After everything had completed, installed LG Mobile update. There is an option to install general USB drivers for your phone, DO NOT do it! Go to Customer Support > Application, Manual & USB driver download. Input your IMEI number from behind the battery in the back of your phone(or just select the "Read your phone" option if you can get it to read your phone). It will search and return the correct drivers for your exact phone. Download and install your USB drivers.
3. Keep your phone disconnected from your PC, and start up LG mobile update again. Connect your phone, LG mobile update should verify the connection by trying to connect to your phone, checking software versions, etc. It will connect even if you are stuck at the LG screen.
4. If everything checks out run KDZ updater and flash your phone back to original specs.
hey first go to emergency mode by pressing back(return) and volume up
and then in emergency mode use kdz it then only pc will recongnise your phone
believe me this thing also happens with me and I know that time I very scared
that time I used this article
http://forum.xda-developers.com/showthread.php?t=1015332
bondzi said:
I flashed custom recovery image successfully and after that, when phone has to restart, it just stuck at LG logo.
When I tried to enter in custom recovery menu, but it shows only LG logo.
I tried to connect with PC, but it was unsuccessfully. The PC doesn't recognize the device. (nothing happens).
Can anyone help me?
Click to expand...
Click to collapse
read general thread it has been answered many times,stucking at lg logo is solved by take out battery reinsert and the 3 button combo
have u tried HOME + VOL DOWN +POWER BUTTON,still if it dont,
read downgrading details here http://forum.xda-developers.com/showthread.php?t=1038338
error guide here http://forum.xda-developers.com/showthread.php?t=883314
The same problem. But i solved it.
1) install again the driver using B2CAppSetup
2)This is based by xda forum by: Zecanills with a detailed explanation from my side.
- You need to download the firmware of your device. Download "Orginal LG Firmware" application (search in xda forum). Open it, put your IMEI and you will download the original ROM.
- Download KDZ updater and uncompress it
KDZ_FW_UPD_EN.zip - 4shared.com - online file sharing and storage - download
- Install msxml.msi from the uncompressed directory
3) Remove the battery, put it back and start the phone in emergency mode (actually the only way possible) back+up volume+power
Connect your device and run KDZ_FW_UPD.exe (as administrator). If the phone is not recognized repeat step 3) several times.
Select Type : 3GQCT
Select PhoneMode : DIAG
In KDZ file : Choose the ROM file you downloaded in the step 2)
Press Launch software update and wait (It will be 10 minutes or so).
Wait until it reboots.
After reboot will appear an image as in the following link: http://androidforums.com/getitnowmarketing/330813-all-one-recovery-thread.html
Don't worry. Restart phone again pushing power button (or remove battery, put it back and push power ) and then after few minutes you will have the phone as the begging when you bought it.
Thanks people for helping me. I just put the phone in emergency mode (Volume UP button + Home button), connected to the PC and flashed with KDZ.
After that, the phone works fine.
Thank you again!
bondzi said:
I flashed custom recovery image successfully and after that, when phone has to restart, it just stuck at LG logo.
When I tried to enter in custom recovery menu, but it shows only LG logo.
I tried to connect with PC, but it was unsuccessfully. The PC doesn't recognize the device. (nothing happens).
Can anyone help me?
Click to expand...
Click to collapse
man i am new as this thing
my lg is p925 and i didnot know that after i install root kdz for p920 and when i run rom maneger i did not find my model lg p925 so i tryed the res of the lest in rom maneger
bad move..........one of them is about lisen or somthing like that....but when i restart my phone frezzzz in lg logo ...i went to recovery mode (vol dwn+power)and all list about wiping no install zip in sd so i tryd (vol up+connect to pc) works so i use lg update an it says i have last apdate then i tryd cs>recovery with imei number but it says model not spport s/w....what must i do..dose flash it will hilp me? plzzzzzzzzzzzzz hilppppppppppp
LG P925
Same thing happened to me! I'm desperate... I've done research for hours and tried everything but no success so far... anyone could help us?
88prince said:
man i am new as this thing
my lg is p925 and i didnot know that after i install root kdz for p920 and when i run rom maneger i did not find my model lg p925 so i tryed the res of the lest in rom maneger
bad move..........one of them is about lisen or somthing like that....but when i restart my phone frezzzz in lg logo ...i went to recovery mode (vol dwn+power)and all list about wiping no install zip in sd so i tryd (vol up+connect to pc) works so i use lg update an it says i have last apdate then i tryd cs>recovery with imei number but it says model not spport s/w....what must i do..dose flash it will hilp me? plzzzzzzzzzzzzz hilppppppppppp
Click to expand...
Click to collapse
Hello, i'm upgrade p760 v20B to 20C in OTA. The phone rebooted and went in recovery. At the moment I can only get in recovery and S/W upgrade mode. I restored backups and install CM 10.1, AOKP.... In all earning error can't restore /data. At the moment I can not mount /sd-card.
If anyone can help me?
:crying:Sorry for bad English
arman4o said:
Hello, i'm upgrade p760 v20B to 20C in OTA. The phone rebooted and went in recovery. At the moment I can only get in recovery and S/W upgrade mode. I restored backups and install CM 10.1, AOKP.... In all earning error can't restore /data. At the moment I can not mount /sd-card.
If anyone can help me?
:crying:Sorry for bad English
Click to expand...
Click to collapse
Hello, i have de same problem yesterday and to resolve it I connect the phone in S/W Mode and run LG Mobile Support Tool.
It flash the original lg firmware so you need to install CWM recovery and root again.
I'm sorry for my bad english too.
In my LG mobile support tool can not connect to the phone ...
Writes: Checking the connection with the cell phone.. and again
Is your phone in s/w mode?
Yes,
1. scoot battery
2. Pressing Vol UP
3. Put usb cable
4. Enter into a phone S/W mode
5. Put the battery and run Lgmobile support tool
LG mobile support tool must work, try with another pc, install drivers and do the same process
Not working. I tried two other computers with two other cable ..
If it matters I unlocked bооtloader
EDIT: WORKS, I deleted 127.0.0.1 csmg.lgmobile.com127.0.0.1 csmgdl.lgmobile.com from the host file and the phone is connected
hi guys!
i have a problem ...
my friend has the GT 5830c, I installed a custom ROM and it worked perfectly!
But after 5 days of use. the phone crashed and restarting it did not load the system and is in the samsung logo screen!
go for recovery and follow the standard process to reinstall the OS. after reinstalled the system, it gave the same problem! to restart it gets stuck at the boot screen!
Another is that I can only access the download mode. after this try mode recovery, this mode recovery does not enable more!
I tried to flash the stock rom, but the system windows 7 does not recognize the device! already tested on four different PCs and it is not recognized!
already reinstalled windows driver several times and does not work. the computer does not even detect that something was connected to the same!
anyone have a light?
excuse my bad english!
thanks
First of all it is on wrong section.
Definitely, I can't understand your english.
All what I understand from this post is :
1) You installed a Custom ROM on your friend's GT-S5830C device.
2) It worked good until the phone "crashed" and it stuck on bootlogo.
3) After this , you went to CWM Recovery and flash a new Custom ROM again ( You deleted data , cache and dalvik cache ? ). If you install a Custom ROM on your current ROM of course there are high chances of bricking device.
4) So , now it stucked on the bootlogo and it didn't go even of CWM Recovery, right ?
5) Now , you could only access download mode. Sure you would do because the device was bricked.
6) You tried to flash stock ROM.
- Now : What version of ODIN you used ? What PDA , CSC , MODEM , or even pit you put on the ODIN Brackets ? Where did you download , or what TUT you followed to flash Stock ROM ?
- What drivers you installed on PC ( all of them ) ?
- You tried all Computer's USB Porters ?
Answer this questions and let me know what specified problem is it.
Regards,
Sniper Killer
If you are in download mode (not recovery) and different pc's don't recognize the device than probably you have a defected usb cable. Try another cable.
Download mode: Vol up + Vol down + Power.
If recognized as an Unknown device than in device manager remove the device, remove drivers, reboot pc, reinstall drivers, reboot and try plugin device in download mode.
:: Today is the first day of what's left of your life. ::
thanks !!
Sniper Killer said:
First of all it is on wrong section.
Definitely, I can't understand your english.
All what I understand from this post is :
1) You installed a Custom ROM on your friend's GT-S5830C device.
2) It worked good until the phone "crashed" and it stuck on bootlogo.
3) After this , you went to CWM Recovery and flash a new Custom ROM again ( You deleted data , cache and dalvik cache ? ). If you install a Custom ROM on your current ROM of course there are high chances of bricking device.
4) So , now it stucked on the bootlogo and it didn't go even of CWM Recovery, right ?
5) Now , you could only access download mode. Sure you would do because the device was bricked.
6) You tried to flash stock ROM.
- Now : What version of ODIN you used ? What PDA , CSC , MODEM , or even pit you put on the ODIN Brackets ? Where did you download , or what TUT you followed to flash Stock ROM ?
- What drivers you installed on PC ( all of them ) ?
- You tried all Computer's USB Porters ?
Answer this questions and let me know what specified problem is it.
Regards,
Sniper Killer
Click to expand...
Click to collapse
hi guys !
I followed this topic that I created myself when I still had a ACE 5830M !
http://www.androidpt.com/index.php?...ck-rom-galaxy-ace-s5830i-c-e-m-via-odin-root/
it always worked! But this device is not mine, more's the same model!
dont worry guy !
tested on another computer and it worked, i already used much this ACE 5830 before. coincided at 4 micros do not recognize the phone, but the fifth computer tested and recognized!
the custom ROM that gave the problem is exactly a one you are using!
thanks for the help!
admins can lock the topic!
ChelebiTech said:
If you are in download mode (not recovery) and different pc's don't recognize the device than probably you have a defected usb cable. Try another cable.
Download mode: Vol up + Vol down + Power.
If recognized as an Unknown device than in device manager remove the device, remove drivers, reboot pc, reinstall drivers, reboot and try plugin device in download mode.
:: Today is the first day of what's left of your life. ::
Click to expand...
Click to collapse
Thank you friend, have solved the case!
Hy! i dont know if my phone is completely bricked or not, i must say in the start. ill say what it happened today with it.
I decided to root my phone,i did it by flashing an update.zip file in recovery mode. This worked good, no problems.
After, i wanted to install cyanogenmod. i prepared 3 files of which i read i need. : -ClockWorkMod_Recovery_6.0.3.0 ,CM7-A5 ( the cyanogenmod version) and gaaps.
I entered the recovery mode, and i installed cwm, and made a backup of the system. after that, for no reason i could remember, i didnt continue installing CM7-A5,but i turned on the phone. everything worked, and looked ok. but after, i decided to finish the installation. But when i tryied to enter the recovery mode, i couldnt anymore. and it doesnt start in any way. The Pc is not recognizing it when its connected via usb. (only makes the sound that something is connected, but the filesystem isn't mounted and "adb" and "fastboot" from sdk android does not recognize it).
Now, i press the power button and it freezes at the android logo. Is there any thing i could do ?
Go to recovery?
mihai666 said:
Hy! i dont know if my phone is completely bricked or not, i must say in the start. ill say what it happened today with it.
I decided to root my phone,i did it by flashing an update.zip file in recovery mode. This worked good, no problems.
After, i wanted to install cyanogenmod. i prepared 3 files of which i read i need. : -ClockWorkMod_Recovery_6.0.3.0 ,CM7-A5 ( the cyanogenmod version) and gaaps.
I entered the recovery mode, and i installed cwm, and made a backup of the system. after that, for no reason i could remember, i didnt continue installing CM7-A5,but i turned on the phone. everything worked, and looked ok. but after, i decided to finish the installation. But when i tryied to enter the recovery mode, i couldnt anymore. and it doesnt start in any way. The Pc is not recognizing it when its connected via usb. (only makes the sound that something is connected, but the filesystem isn't mounted and "adb" and "fastboot" from sdk android does not recognize it).
Now, i press the power button and it freezes at the android logo. Is there any thing i could do ?
Click to expand...
Click to collapse
I'm at the same situation, after a mistake in a TCT Bootloader: i've formatted Misc and more partitions.. and now i'm only with a android logo.
The PC recognize a "Broadcom USB wireless modem" when i connect usb and press contemporary volume-.
Recovery not start (android logo) end download mode normally procedure (volume- and power) not working.
I'd like to test to reflash recovery by Recovery Installer By Sls13 v 2.0! but the driver not run with fastboot mode.. i've tried to install ADB Sdk suite and Java Sdk.. i've the usb-driver original, but my system (win7 32bit) make identification of Smart2 as "Broadcom USB wireless modem"..
i accidentally erased boot and bootloader.nor download mode nor recovery work and my pc recognize it like Broadcom USB wireless modem.Any solution?
I have a problem with my xt615,
it started out with the bootloop problem.
after that i managed to get into flash mode (redscreen) installed the pc drivers
and tried to flash 2-3 different stock roms, and a recovery via RSD LITE version 6.
at the beginning the phone was recognized as a zeus flash device, but i changed that driver to a motorola usb device.
somehow i manage to get the phone connected in the FLASH MSM7227 but still no program can recognize it so i can flash...
since i tried to flash the recovery i cannot enter the Flash mode (red screen) and earlier, when i was trying to turn on the devices from 50power attempts 2 times it was the moto bootloop logo...
now i cannot do that...
any suggestions how to get this device flashed!?or get it into flash mode?!
all the time its blackscreen and as i enter the usb it connects to the pc depends on which mode...when i hold the powerbutton and connect it it will connect as flash device msm7227 but still...i cannot do anything via RSD LITE , also tried via adb to get it recognized. but no luck...
Help desperatly needed