HI,
In my quest for rooting my android device i accidently removed the firmware and then the phone wont boot and do anything but it connects in vcom mode i tried to install back the rom and managed to installed the preloader and dsp_bl boot and u boot and logo and recovery but cant install system.img,cache and user data and sec_ro in my phone (sp flash tool giving error 4017), now i can access cwm recovery but cant access the phone because the phone is stuck on boot logo Please Help...
Thank You
Try using the SP Flash tool in Firmware Upgrade mode.
Press Firmware Upgrade, check all the checkboxes and see if that helps.
Have the same problem
Hello
Have the same problem with my mtk6577 ! have you find anything to do ??
Have new 6577 S3 clone with 512 RAM with this info from factory mode:
chip :mt6577
MODEM VER:MAUI.11AMD.W11.50.SP.V12.2012/09/20 18:56
BAR COD :050501050801MT01234567890123456710
BUILD TIME : 2013 05 02 11:59:20
UBOOT VER :2010.06
KERNEL VER :3.0.13 ([email protected])(gcc version 4.4.3 GCC)
ANDROID VER :4.1.1
SW VER : ALPS.ICS.MP.V2.6
CUSTOM BUILD VERNO : S3B_75_CN_XLS_V003_20130502
This phone have probleme with debuging java script web app while a have root permission i have changed default browser (install new one downloaded from internet make it sys app and add odex file ) ! that has not resolve the probleme but the phone still functional!
Also i have changed libwebcore.so with diverse one and my phone don't boot any more !
I can access recovery mode , factory mode but in normal mode the phone still blocked in samsung logo!
any help ???!
SethPDA said:
Try using the SP Flash tool in Firmware Upgrade mode.
Press Firmware Upgrade, check all the checkboxes and see if that helps.
Click to expand...
Click to collapse
I Tried it as well but the same error BTW can i try the write memory option to write system.img???
For me resolved
bilalz400 said:
I Tried it as well but the same error BTW can i try the write memory option to write system.img???
Click to expand...
Click to collapse
Flashing only system.img hat resolved this boot problem for me !
thanks
houssem said:
Flashing only system.img hat resolved this boot problem for me !
thanks
Click to expand...
Click to collapse
Thats the problem I cant do it !
Which ver of sp flash tool are u using???
bilalz400 said:
Thats the problem I cant do it !
Which ver of sp flash tool are u using???
Click to expand...
Click to collapse
SP_Flash_Tool_v3.1224.01
houssem said:
Hello
Have the same problem with my mtk6577 ! have you find anything to do ??
Have new 6577 S3 clone with 512 RAM with this info from factory mode:
chip :mt6577
MODEM VER:MAUI.11AMD.W11.50.SP.V12.2012/09/20 18:56
BAR COD :050501050801MT01234567890123456710
BUILD TIME : 2013 05 02 11:59:20
UBOOT VER :2010.06
KERNEL VER :3.0.13 ([email protected])(gcc version 4.4.3 GCC)
ANDROID VER :4.1.1
SW VER : ALPS.ICS.MP.V2.6
CUSTOM BUILD VERNO : S3B_75_CN_XLS_V003_20130502
This phone have probleme with debuging java script web app while a have root permission i have changed default browser (install new one downloaded from internet make it sys app and add odex file ) ! that has not resolve the probleme but the phone still functional!
Also i have changed libwebcore.so with diverse one and my phone don't boot any more !
I can access recovery mode , factory mode but in normal mode the phone still blocked in samsung logo!
any help ???!
Click to expand...
Click to collapse
Do you still have the backup of orignal libwebcore.so
Sent from my A2_Classic using xda app-developers app
Related
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
ANYONE?
goophone v88 i5 from dhgate seller name shenzhen
Hey my phone is goophone i5 v88 i5 I brought from dhgate seller nane is shenzhen iam also trying to bypass cwm recovery but no sucess when flashing thrpugh mut and the reebooting to recovery blank display I think the processor is mt6577 dual core ram is 512 mb and screen resolution is 480*854 but with a yweaked stock kernel the system show fake hardware like 2gb ram higher screen resolution and so more but the phone rxactly looks and feels like iphpne 5 and about the software running on this phone I thing it is tje bugg free and coolest full ios6 themed rom
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Same here....unable to enter recovery mode after flashing CWM ...phone works but it "skips'" the recoverymode...factory mode works but yee...some solution for this would be nice......atleast i can still use the phone...altho with the stock rom witch is crap cause i cant back it up for flashing the phone...
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Any progress?
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Ok so problem solved.... unfortunately it will delete everything on your phone....i simply flashed the phone using SP-Flashtool and a rom from here => http://pan.baidu.com/share/link?shareid=324294&uk=540296524#dir/path=/Rom/Goophone I5 Rom supplyed by Zap ...
its the version v18 ... theres a v22 also you can download from http://pan.baidu.com/share/link?shareid=412131&uk=3022339290 but i havent tryed it yet so i dont know how well it works....
can you see what version your stock rom is? ... i think mine was 27 but im not 100% and i have been looking for a later version stock rom but i havent found any yet.....so yee.... the rom i installed now semes to be pretty much the same although it gave me lower antutu scores than the first one i had...dunno how mush that has to do with the software.... but userwise i havent noticed any major differance more than the charging animation thats different when the phone is switched of..and yes the system recovery 3e is in english
now ofcourse these roms are for the Fastcardtech Goophone I5 N2 micro simcard!!!
all is done at your own risk!!
also you HAVE TO INSTALL the mtk6577 VCOM driver in order to be able to use the sp.flastool correctly.....anything else might **** up your phone.... theres a good tutorial here http://forum.xda-developers.com/showthread.php?t=2206421
good luck and please post what stock version you have running now!! and if the phone is running fine otherwise maybe you want to reconsider flashing it since the versions i posted for download are v18 and v22....would love to get my hands on the newest stock rom...(did try to just flash the recovery image from the v18 but it bricked my phone)
jinishpv said:
Hey my phone is goophone i5 v88 i5 I brought from dhgate seller nane is shenzhen iam also trying to bypass cwm recovery but no sucess when flashing thrpugh mut and the reebooting to recovery blank display I think the processor is mt6577 dual core ram is 512 mb and screen resolution is 480*854 but with a yweaked stock kernel the system show fake hardware like 2gb ram higher screen resolution and so more but the phone rxactly looks and feels like iphpne 5 and about the software running on this phone I thing it is tje bugg free and coolest full ios6 themed rom
Click to expand...
Click to collapse
Hello,
About that phone, i buyed that phone, from the same seller, yesterday.
It is fake?Its not the actual goophone i5s that we see on their website?
Thanks!
i have the goophone i5 mt6577 with bee on the back cover
i can have the original recovery image recovery E3?
i wanto to turn back to original factory rom but my older backup don't recognize from colonelzap's cmw recovery
thank you
luponero76 said:
i have the goophone i5 mt6577 with bee on the back cover
i can have the original recovery image recovery E3?
i wanto to turn back to original factory rom but my older backup don't recognize from colonelzap's cmw recovery
thank you
Click to expand...
Click to collapse
did you flash the colonelzap recovery with flashtool??
if your colonelzap cwm works then you should back up your rom with cwm...
(I have not tryed it my self but i think it should work)
download this rom
http://pan.baidu.com/share/link?shareid=412128&uk=3022339290
uncompress and youl find a file called RECOVERY.IMG.....
now open your flashtool (i use sp-flashtool) and load the scatterfile "MT6577_Android_scatter_emmc.txt"
the flash tool is gonna show you a list with all the files that where in the zip..
uncheck all of them so the only one that is checkes is the RECOVERY.IMG ....and then you flash and TADA.....you should have your old S3 recovery back
if it all goes to **** you can just flash the complete rom and it will work.. .....atleast if you have the gooptone i5 n2/lte mtk6577
dont use mobile uncle for these files...that screwed up my phone....they need to be flashed to the phone!!
AND... this is the international v18 rom... dont know what version you have right now....but if you manage to make a back up rom of your phone PLEASE SHARE!!! .... ive been looking for the later international rom....and if you have the backup you can allways upgrade from the v18....so
GOOD LUCK!! ...keep us posted! ...and if you need more flashingdeetales you can just google or ask
CWM Goophone i5 N2 black screen
Hi , I have similar issue like this ...
I have Goophone i5 N2 from aliexpres.com
It's come with original ROM and with Root, unfortunately it has lot of bugs . So I would like to install custom ROM from Colonelzap.blogspot
I spent more then 2 days with trying to flash Clock work recovery mode . So I'll be able to flash new ROM. But there I'm stuck
I red several tutorial for instalation , I did go trough threads here on forum , etc but still without any success .
1, I tried to use MobileUncle MTK for set recovery image with image from colonel zap blog
2, I tried to use (maybe 10 different version of) SP Flash Tool and still got 2 issue (4050 or 8038) during flashing
I used recovery image from Greg's Mobile gadgets
And result is still same , When I try to load to recovery mode , I still got black screen only .. And I have to restart mobile again , then it start up normally ...
I'm starting to be little bit desperate
I'll really appreciate any help or advice
PS: because forum rules , I can't add any links to sources which I used .. But I'll response very fast for any questions. Thanks
Dude!! u gotta make sure u have the MTK Vcom drivers installed on your computer......when u got that its easy peasy..... make sure your phone us turbned of and DISSCONNECTED from the coputer... now in SPflashtool you load the rom that u wanna flash and you press the transfer button....when thats done the computer is gonna start looking for the phone.....this is the moment you connect your phone to the computer....otherwise it wont work...windows will start looking for som other crap driver to use with your phone.......
if u wanna get ur phone to work well you should go to the talkingmobi blog and download the stock rom and flash that one....then when thats done flash the CMW and throu that u put in the manuxo rom!!......thats more or less what ive done...altho i made my own rom...but its more or less the same as manuxos just with less chinese crap...but that u can do your self when u got the phone set up...easyest way i think is with "root app remover" that u can get for free from the app store...or "Playstore" to be precise... good luck!!
ja.viper said:
Hi , I have similar issue like this ...
I have Goophone i5 N2 from aliexpres.com
It's come with original ROM and with Root, unfortunately it has lot of bugs . So I would like to install custom ROM from Colonelzap.blogspot
I spent more then 2 days with trying to flash Clock work recovery mode . So I'll be able to flash new ROM. But there I'm stuck
I red several tutorial for instalation , I did go trough threads here on forum , etc but still without any success .
1, I tried to use MobileUncle MTK for set recovery image with image from colonel zap blog
2, I tried to use (maybe 10 different version of) SP Flash Tool and still got 2 issue (4050 or 8038) during flashing
I used recovery image from Greg's Mobile gadgets
And result is still same , When I try to load to recovery mode , I still got black screen only .. And I have to restart mobile again , then it start up normally ...
I'm starting to be little bit desperate
I'll really appreciate any help or advice
PS: because forum rules , I can't add any links to sources which I used .. But I'll response very fast for any questions. Thanks
Click to expand...
Click to collapse
virre62 said:
Dude!! u gotta make sure u have the MTK Vcom drivers installed on your computer......when u got that its easy peasy..... make sure your phone us turbned of and DISSCONNECTED from the coputer... now in SPflashtool you load the rom that u wanna flash and you press the transfer button....when thats done the computer is gonna start looking for the phone.....this is the moment you connect your phone to the computer....otherwise it wont work...windows will start looking for som other crap driver to use with your phone.......
if u wanna get ur phone to work well you should go to the talkingmobi blog and download the stock rom and flash that one....then when thats done flash the CMW and throu that u put in the manuxo rom!!......thats more or less what ive done...altho i made my own rom...but its more or less the same as manuxos just with less chinese crap...but that u can do your self when u got the phone set up...easyest way i think is with "root app remover" that u can get for free from the app store...or "Playstore" to be precise... good luck!!
Click to expand...
Click to collapse
Hi ,
I did this , several times . I installed correct Vcom driver, and update to last version . And I did follow steps for SP Flash tools. And i can see for aprox 2 sec , load driver for Vcom for Mediatek and So I think , that this part I made correctly.
When I tried load scattle file in to SP flash tool , and then run download and after that I connect switch off phone via cable .
SP FT find mobile via Vcom , and start upload and I see red progress bar on 100 and then after couple seconds I got error message :
1 , sometimes : BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) ...
2, or : SP Flash Tool error 8038
ohh yee... ive had that aswell when i flashed the ladies n9589.....thats either due to a bad rom...maybe some error when you downloaded it OR ande most probably an incompatible version of SPFlashtool.... sometimes you have to try diffrent versions to get it to work on your specific phone... if u got the goophone i5 n2/LTE then you should try "SP_Flash_Tool_v3.1224.01"...
Thats the one i use for flashing my goophone and it works just fine.....and when you flash the CWM you should first boot up the phone with the latest rom you flashed b4 cause if you flash on an unbooted rom it wil most probably brick your phone so u gotta do the complete romflash from scratch....remember most costum roms are basically like "CWMbackups" that people do on their modifyed roms and spread....so with spflashtool you allways need to start with a propper rom with scatterfile....but ye....try running annother version of spflashtool... like the one i wrote in top...works for me ...and u can find it on goolgle
ja.viper said:
Hi ,
I did this , several times . I installed correct Vcom driver, and update to last version . And I did follow steps for SP Flash tools. And i can see for aprox 2 sec , load driver for Vcom for Mediatek and So I think , that this part I made correctly.
When I tried load scattle file in to SP flash tool , and then run download and after that I connect switch off phone via cable .
SP FT find mobile via Vcom , and start upload and I see red progress bar on 100 and then after couple seconds I got error message :
1 , sometimes : BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) ...
2, or : SP Flash Tool error 8038
Click to expand...
Click to collapse
virre62 said:
ohh yee... ive had that aswell when i flashed the ladies n9589.....thats either due to a bad rom...maybe some error when you downloaded it OR ande most probably an incompatible version of SPFlashtool.... sometimes you have to try diffrent versions to get it to work on your specific phone... if u got the goophone i5 n2/LTE then you should try "SP_Flash_Tool_v3.1224.01"...
Thats the one i use for flashing my goophone and it works just fine.....and when you flash the CWM you should first boot up the phone with the latest rom you flashed b4 cause if you flash on an unbooted rom it wil most probably brick your phone so u gotta do the complete romflash from scratch....remember most costum roms are basically like "CWMbackups" that people do on their modifyed roms and spread....so with spflashtool you allways need to start with a propper rom with scatterfile....but ye....try running annother version of spflashtool... like the one i wrote in top...works for me ...and u can find it on goolgle
Click to expand...
Click to collapse
I used your suggested version of SP_Flash_Tool_v3.1224.01 and I used 2 different recovery.img , but in both tries i got same error as you can see on image
So i tried to upload new rom .
And it's look like a made a brick from this ... Now it doesn't respond at all ... SP flash tool doesn't recognize mobile at all
I can't connect now to the SP flash tool , it's just dont recognize phone , I can see only in device manager , which see 2 cards
and when I connect phone I can see for a moment USB Vcom port driver in list and for 1 second I can see that it write
Code:
Device is work properly
and then is change to image
Code:
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
Do you have the ADB drivers installed on your computer? .... might be there where your problem is.....or annother conflicting driver on your computer....google the forums for ADB driver MTK Vcom driver install.... as i get it the computer wont know how to talk linux without the ADB pack.......i think its included in some vcom driver packs but i do believe i had to install that separatly the first time.....check that out...cause it should work.....if now try it with annother computer...could be some crap driver on your computer messing it up...i had an emulator at one point messing my spflashtool up....
ja.viper said:
So i tried to upload new rom .
And it's look like a made a brick from this ... Now it doesn't respond at all ... SP flash tool doesn't recognize mobile at all
I can't connect now to the SP flash tool , it's just dont recognize phone , I can see only in device manager , which see 2 cards
and when I connect phone I can see for a moment USB Vcom port driver in list and for 1 second I can see that it write
Code:
Device is work properly
and then is change to image
Code:
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
Click to expand...
Click to collapse
stock ROM goophone-i5-0428-f-yzs.zip
virre62 said:
Do you have the ADB drivers installed on your computer? .... might be there where your problem is.....or annother conflicting driver on your computer....google the forums for ADB driver MTK Vcom driver install.... as i get it the computer wont know how to talk linux without the ADB pack.......i think its included in some vcom driver packs but i do believe i had to install that separatly the first time.....check that out...cause it should work.....if now try it with annother computer...could be some crap driver on your computer messing it up...i had an emulator at one point messing my spflashtool up....
Click to expand...
Click to collapse
So , I don't think so that problem is the driver, because SP flash tool works fine when I try to update firmware , it's finish all task , but then the mobile doesn't start . I think that I don't have correct ROM . I tried 3 different ROM and mobile still not start up . Still just blink screen and that's all . And then I have to some how switch off . Then I'm able to do update again trough SP flash Tool , but I need correct one ROM.
I tried to find stock ROM Goophone-i5-0428-f-yzs.zip , but I found it only on some crazy Chinese site 400GB.com (file/19858713) and I was unable to download it .:silly:
are you sure its a goophone you have?
Also..... your phone NEEDS to be charged with ATLEAST 60% or it will fail....flashing really drains the battery and ive had flashings fail just cause of low battery......but yee.... if its not a real goophone it wont work either way.... or if its annother model....you need to have the correct rom for the right phone or it will fail 99,5% of the times..
dont think i can do much more for u.....running out of ideas......it should work with that assuming your hardware is good.
ja.viper said:
So , I don't think so that problem is the driver, because SP flash tool works fine when I try to update firmware , it's finish all task , but then the mobile doesn't start . I think that I don't have correct ROM . I tried 3 different ROM and mobile still not start up . Still just blink screen and that's all . And then I have to some how switch off . Then I'm able to do update again trough SP flash Tool , but I need correct one ROM.
I tried to find stock ROM Goophone-i5-0428-f-yzs.zip , but I found it only on some crazy Chinese site 400GB.com (file/19858713) and I was unable to download it .:silly:
Click to expand...
Click to collapse
stock ROM goophone-i5-0428-f-yzs.zip
virre62 said:
are you sure its a goophone you have?
Also..... your phone NEEDS to be charged with ATLEAST 60% or it will fail....flashing really drains the battery and ive had flashings fail just cause of low battery......but yee.... if its not a real goophone it wont work either way.... or if its annother model....you need to have the correct rom for the right phone or it will fail 99,5% of the times..
dont think i can do much more for u.....running out of ideas......it should work with that assuming your hardware is good.
Click to expand...
Click to collapse
I saw some fake goophone on net , but it was with dual core CPU MTK 6587 etc ...
When I download SU and some other app like CPU Z ,etc I checked and I didn't see any suspicions information . So I hope that it is real Goophone i5 N2 ...
When I finished update firmware I saw in SP Flash tool that it's show some device info , so I'll add tomorrow another screen from this app.And try to verify if it's original goophone i5 N2 .
But this info about at least 60% of batter is important! Because it was charged about 50 % when I run update!
But process of flashing finished without any errors and in the end I saw Green circle , SO I was thinking that It's was finished successfully .....
Important question is . What should be done after updating new Firmware ?
I just tried to Start up the mobile .Should I do anything else ?
well if you get the green circle then its most probably that your out of battery......leave the phone charging for some hours... flash it and when your doen unplug it from the computer and just start it and wait cause the first boot up usually takes time,.....maybe up to 2-10 min depending on what rom u flashed......if you dont have enough battery to complete first boot you might run in to problems.....and if you wanna test your hardware you press the volume + and power and you get in to the factory hardware test menu just if u wanna make sure that ur phone is ok
ja.viper said:
I saw some fake goophone on net , but it was with dual core CPU MTK 6587 etc ...
When I download SU and some other app like CPU Z ,etc I checked and I didn't see any suspicions information . So I hope that it is real Goophone i5 N2 ...
When I finished update firmware I saw in SP Flash tool that it's show some device info , so I'll add tomorrow another screen from this app.And try to verify if it's original goophone i5 N2 .
But this info about at least 60% of batter is important! Because it was charged about 50 % when I run update!
But process of flashing finished without any errors and in the end I saw Green circle , SO I was thinking that It's was finished successfully .....
Important question is . What should be done after updating new Firmware ?
I just tried to Start up the mobile .Should I do anything else ?
Click to expand...
Click to collapse
I tried to update firmware for my Star n9500 (mtk6589) - in my firmware ringer/speaker didnt worked !!!
i used SP flash tool, and windows disconected in the middle of the proces.
Phone was dead after that, now im getting error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) - [EMI] Enable DRAM Failed!
So no way to upload old or new firmware always same problem. I tested 3 computer + 3 different USB cables, always same error, 2 different firmwares (from needrom.com)
Windows detect phone as MTK USB port or some times (i still dont know how exactly) i get also detected as DA USB VCOM PORT (in drivers details i have id VID_OE8B&PID_2001) - but also in this mod SPflash tool (im using verson v3.1304.0.119) do not start to trnsfer data. (here programming dont start - so i dont get error)
Any idea how to fix the phone?
palicaj said:
I tried to update firmware for my Star n9500 (mtk6589) - in my firmware ringer/speaker didnt worked !!!
i used SP flash tool, and windows disconected in the middle of the proces.
Phone was dead after that, now im getting error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) - [EMI] Enable DRAM Failed!
So no way to upload old or new firmware always same problem. I tested 3 computer + 3 different USB cables, always same error, 2 different firmwares (from needrom.com)
Windows detect phone as MTK USB port or some times (i still dont know how exactly) i get also detected as DA USB VCOM PORT (in drivers details i have id VID_OE8B&PID_2001) - but also in this mod SPflash tool (im using verson v3.1304.0.119) do not start to trnsfer data. (here programming dont start - so i dont get error)
Any idea how to fix the phone?
Click to expand...
Click to collapse
Same problem here!
Steve-Austin said:
Same problem here!
Click to expand...
Click to collapse
Also problems with speaker / ringer???
palicaj said:
Also problems with speaker / ringer???
Click to expand...
Click to collapse
Nope, just the BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Make sure ALL files in the checklist on the side are present - Got similar errors when flashing rom without preloader to a different device.
There might be some clues to pick up here: http://forum.xda-developers.com/showthread.php?t=1943442
... I'd want to start with making sure you're flashing a rom that you're certain is made for your device - and make 100% sure Preloader is included!
pr0xZen said:
Make sure ALL files in the checklist on the side are present - Got similar errors when flashing rom without preloader to a different device.
There might be some clues to pick up here: http://forum.xda-developers.com/showthread.php?t=1943442
... I'd want to start with making sure you're flashing a rom that you're certain is made for your device - and make 100% sure Preloader is included!
Click to expand...
Click to collapse
I solved my problem.
As a last chance i tried to flash my N9500 with wrong firmware from Star S5.
And miracle - phone was flashed without problems , no errors.
After that was non functional, but this allowed me to flash original n9500 firmware, and phone was functional
Rom
palicaj said:
I tried to update firmware for my Star n9500 (mtk6589) - in my firmware ringer/speaker didnt worked !!!
i used SP flash tool, and windows disconected in the middle of the proces.
Phone was dead after that, now im getting error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) - [EMI] Enable DRAM Failed!
So no way to upload old or new firmware always same problem. I tested 3 computer + 3 different USB cables, always same error, 2 different firmwares (from needrom.com)
Windows detect phone as MTK USB port or some times (i still dont know how exactly) i get also detected as DA USB VCOM PORT (in drivers details i have id VID_OE8B&PID_2001) - but also in this mod SPflash tool (im using verson v3.1304.0.119) do not start to trnsfer data. (here programming dont start - so i dont get error)
Any idea how to fix the phone?
Click to expand...
Click to collapse
Hi ther just follow this steps:
Root
Alps N9500 rom April 19 2013
Fix GPS
After the update fix the camera with SP MDT and GPS with M44 toolbox.
Did this myself and what a great phone this is...
is bricked
rom stock no request driver display and camera update 10/05/21013
https: //hotfile.com/ dl/ 207896579/ 2cb4abe/ STAR_N9500.rar. html
open flashtool and scatter rom folder
click download
cable and battery insert
push on device
power and vol down
start flash stop power and vol down
I hope it works method
ok in my mtk 6577 9300 rom
no bricked normal procedure flashtool
sorry my bad english
S4 Clone ?
Hi! My phone is Star N9500. And when I want update it to 4.2.2, it bricked.
Erorr is:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Please help me!
NEXT UPDATE ROM STAR N9500 V1 E V2 STOCK
Hardware : MT6589
Model : Star N9500
Build number : freedgt_20130620
Build date UTC : 20130507-112453
Android v : 4.2.2
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P4, 2013/05/04 18:26
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri May 10 11:08:37 CST 2013
v1 driver display LT050ANKP019A
v2 driver display 1-RX_499NT_598A
Rom Stock IN FOLDER Star N9500 STOCK 4.2.2
Recovery 3e for version LCD 1-RX_499NT_598A
RECOVERY CWM FOR VERSION LT050ANKP019A RECOVERY IN TO FOLDER Scatter From LCD CWM REPLACE IN FOLDER Star N9500 STOCK 4.2.2
for driver LCD 1-RX_499NT_598A use scatter 2 (v2)
for driver LT050ANKP019A use normal scatter
1 driver display LT050ANKP019A
v2 driver display 1-RX_499NT_598A
Rom Stock IN FOLDER Star N9500 STOCK 4.2.2
Recovery 3e for version LCD 1-RX_499NT_598A
https: //mega.co.nz / #!d5hUCTCJ!QaswYlltRIFdR_1XJSARSzmu7Aop86uEGxBCkUyXwUw
freedgt said:
NEXT UPDATE ROM STAR N9500 V1 E V2 STOCK
Hardware : MT6589
Model : Star N9500
Build number : freedgt_20130620
Build date UTC : 20130507-112453
Android v : 4.2.2
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P4, 2013/05/04 18:26
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri May 10 11:08:37 CST 2013
v1 driver display LT050ANKP019A
v2 driver display 1-RX_499NT_598A
Rom Stock IN FOLDER Star N9500 STOCK 4.2.2
Recovery 3e for version LCD 1-RX_499NT_598A
RECOVERY CWM FOR VERSION LT050ANKP019A RECOVERY IN TO FOLDER Scatter From LCD CWM REPLACE IN FOLDER Star N9500 STOCK 4.2.2
for driver LCD 1-RX_499NT_598A use scatter 2 (v2)
for driver LT050ANKP019A use normal scatter
1 driver display LT050ANKP019A
v2 driver display 1-RX_499NT_598A
Rom Stock IN FOLDER Star N9500 STOCK 4.2.2
Recovery 3e for version LCD 1-RX_499NT_598A
https: //mega.co.nz / #!d5hUCTCJ!QaswYlltRIFdR_1XJSARSzmu7Aop86uEGxBCkUyXwUw
Click to expand...
Click to collapse
It not work.
My phone is Star N9500. And when I want update it to 4.2.2, it bricked.
Erorr is:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Please help me!
look the video by youtube its solution for dram failed 4032
you search at youtube dram failed 4032 star x920e, you finded.
palicaj said:
I tried to update firmware for my Star n9500 (mtk6589) - in my firmware ringer/speaker didnt worked !!!
i used SP flash tool, and windows disconected in the middle of the proces.
Phone was dead after that, now im getting error BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) - [EMI] Enable DRAM Failed!
So no way to upload old or new firmware always same problem. I tested 3 computer + 3 different USB cables, always same error, 2 different firmwares (from needrom.com)
Windows detect phone as MTK USB port or some times (i still dont know how exactly) i get also detected as DA USB VCOM PORT (in drivers details i have id VID_OE8B&PID_2001) - but also in this mod SPflash tool (im using verson v3.1304.0.119) do not start to trnsfer data. (here programming dont start - so i dont get error)
Any idea how to fix the phone?
Click to expand...
Click to collapse
ringer/speaker didnt worked
palicaj said:
Also problems with speaker / ringer???
Click to expand...
Click to collapse
i did root with motochoper and mtk6589 drivers and now have no system sound.. i have star n9500...help me
Iocean X7 Elite Brick
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully flashed the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)
I have no idea what to do next can someone help me.
n9500 woos
You guys are scaring me with the problems your having with flashing/rooting/recovery installation on the n9500. I just order one off ebay for my wife whos been a good miss' using her Optimus T and hasnt complained about it, well, to much. But I am glad that some of you have found help and or fix the problems yourself. I plan on ordering one myself but it looks like i'll have to leave it stock for a time until we got our own section on the forums which i think would help with cookin the roms and receiving help when things go a muck.
for BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
edit your scatter or scatter rom
sample
CACHE 0x2d180000<---no cpy
add
__NODL_
solve result
__NODL_CACHE 0x2d180000
sample
USRDATA 0x34f80000 <----no copy
add
__NODL_
result
__NODL_USRDATA 0x34f80000
result
__NODL_USRDATA your ex code
__NODL_CACHE you ex code
exit and save file
flash no battery requised
SP Flash Tool v3.1316.0.150
https ://hotfile.com/dl/230492941/fa4f1d1/SP_Flash_Tool_v3.1316.0.150.rar.html
Jtag it
please help i have haipai i9389 i bootlooped it so i downloaded rom from needrom and flashed it but it gives me white screen how can i fix this?
My phone is this
http://www.mixeshop.com/index.php?m...bf85a41b837&categories_id=&keyword=star+n9500
It is the 8gb version
I flashed
http://www.needrom.com/mobile/star-n9500-4/comment-page-5/#comments
and phone is dead
I get BROM_ERROR: S_FT_ENABLE_DRAM_FAIL(4032)
(EMI) Enable DRAM failed
My phone is seen as MTK USB by SP flash tool
Help. Is there anyway to fix this?
Hello guys.
I have a problem here.
I have Replica of Samsung Galaxy S4 (china made).
The spesification is :
BB Chip --- MT6577
MS Board --- magcomm77_cu_ics2
Kernel Ver. --- 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC( ) #1 SMP PREEMPT
Android Ver --- 4.0.4
SW Ver --- ALPS.ICS2.MP.V1.5
Custom Build Verno --- Galaxy.20130531.Q.V008
The divices has ROOTED by my self using SRS One Click Root :good:
Bootloop started when i edited the framework-res.apk
I pulled out from devices using QtADB.But i cant push it back to the device again,so i forced push via sd-card using room toolbox.I copied from sd-card,then paste into the system/framework,then the bad things happened
The problem is,this device hasn't have RECOVERY,CWM,FASTBOOT.
It only has DOWNLOAD mode (icon with lying broken android),but there is no list of option (instal zip from internal,wipe data,advanced,etc.There is only logo without option.
I tried flashing using ODIN,but USB IS NOT RECOGNIZED.
I've tried followed this method http://forum.xda-developers.com/showthread.php?t=1943442 but still not work,and still bootloop.
So,anyone can help me solving this problem??
** SORRY FOR MY BAD ENGLISH **
psychosick said:
Hello guys.
I have a problem here.
I have Replica of Samsung Galaxy S4 (china made).
The spesification is :
BB Chip --- MT6577
MS Board --- magcomm77_cu_ics2
Kernel Ver. --- 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC( ) #1 SMP PREEMPT
Android Ver --- 4.0.4
SW Ver --- ALPS.ICS2.MP.V1.5
Custom Build Verno --- Galaxy.20130531.Q.V008
The divices has ROOTED by my self using SRS One Click Root :good:
Bootloop started when i edited the framework-res.apk
I pulled out from devices using QtADB.But i cant push it back to the device again,so i forced push via sd-card using room toolbox.I copied from sd-card,then paste into the system/framework,then the bad things happened
The problem is,this device hasn't have RECOVERY,CWM,FASTBOOT.
It only has DOWNLOAD mode (icon with lying broken android),but there is no list of option (instal zip from internal,wipe data,advanced,etc.There is only logo without option.
I tried flashing using ODIN,but USB IS NOT RECOGNIZED.
I've tried followed this method http://forum.xda-developers.com/showthread.php?t=1943442 but still not work,and still bootloop.
So,anyone can help me solving this problem??
** SORRY FOR MY BAD ENGLISH **
Click to expand...
Click to collapse
Hi,
Can you reflash the ROM without wipe?
All your data and settings will remain intact,but you will put back the original system files.
malybru said:
Hi,
Can you reflash the ROM without wipe?
All your data and settings will remain intact,but you will put back the original system files.
Click to expand...
Click to collapse
Sadly,no i cant.
The only option in device is "erase all emmc/format".
But if you tell me how to do it,i will try it.
The problem is,when i turnin into DOWNLOAD MODE,the USB NOT RECOGNIZED.
But when i turn it on,the pc's detected my device as Alcatel
Many tools cant detect the device,such as Android Recovery Manager,Android AIO Flasher,QtADB,Droid Explorer,Flash Tool.
Strange,the version info tell if device MT6577.But my pc's has detected as Alcatel.
Also,i get problem when installed/setting the MT6577 drivers for my pc's (Win 7 32bit).
same issue
psychosick said:
Sadly,no i cant.
The only option in device is "erase all emmc/format".
But if you tell me how to do it,i will try it.
The problem is,when i turnin into DOWNLOAD MODE,the USB NOT RECOGNIZED.
But when i turn it on,the pc's detected my device as Alcatel
Many tools cant detect the device,such as Android Recovery Manager,Android AIO Flasher,QtADB,Droid Explorer,Flash Tool.
Strange,the version info tell if device MT6577.But my pc's has detected as Alcatel.
Also,i get problem when installed/setting the MT6577 drivers for my pc's (Win 7 32bit).
Click to expand...
Click to collapse
i am having the same problem,
my model is ipro s3pro
mt6577
android version 4.0.4
ms board. htt77_ics2
kernal version 3.0.13
and my phone stops right at the IPRO booting screen
the last thing i remembered doing is moving around some files in the system and rebooting
that was probably stupid but i need help restoring my phone
i tried the system recovery by holding up, menu and power buttons and wiped the data to factory and cache partition
and rebooted and that didnt work
i tried sp flash tool but it doesnt give me any scatter files to choose from
i tried mt65** preloader, it says it successfully download and install but it isnt in my device manager and when i try to connect the phone
meta mode it keeps resetting and wont stay connected
PLEASE HELP ME SOME AND I HAVENT HAD THE PHONE GOOD FOR A MONTH YET
OH, I ROOTED WITH SHUAME
Help if u can,..
Same problem with me,..... :crying:
I have Karbonn A25 (BB-MT6577),....i am also stuck on boot logo ,.........plz help me out,...
the thing i did wrong after root is i replaced boot logo and fonts,..is there any way to replace them,..android commander get's access to system partition on mtd block 12,... but need root permission,..which is not possible until android boots up,........
Bootloop issue
I have iball andi 4.5h
it has MT6577 device.
Android ver.--4.2.2
The problem is this device hasn't open in recovery mode(only restart),I tried flashing but USB IS NOT RECOGNIZED.
anyone can help me solving this problem?
hi, im new to xda and tried a lot of TS
what i have is :
Model: GT-I9500
FCC ID A3LGTI9500
SSN:-I9500GSMH
MADE in VIETNAM by SAMSUNG
then i rooted it.... works fine for a few moment
powered it off and turn it back on and....
the samsung LOGO is inverted and is not booting up past to that screen
>tried to do factory reset/ wipe user data
= still the same problem
>followed TUTs on flashing
>tried several ROMS
= im getting " brom error s_chip_type_not_match (3168)"
intalled pdanet and mtk droid tools
= not detected
please help me
nivekfr said:
hi, im new to xda and tried a lot of TS
what i have is :
Model: GT-I9500
FCC ID A3LGTI9500
SSN:-I9500GSMH
MADE in VIETNAM by SAMSUNG
then i rooted it.... works fine for a few moment
powered it off and turn it back on and....
the samsung LOGO is inverted and is not booting up past to that screen
>tried to do factory reset/ wipe user data
= still the same problem
>followed TUTs on flashing
>tried several ROMS
= im getting " brom error s_chip_type_not_match (3168)"
intalled pdanet and mtk droid tools
= not detected
please help me
Click to expand...
Click to collapse
Have you tried to bring it back to stock?
UltraWelfare said:
Have you tried to bring it back to stock?
Click to expand...
Click to collapse
how? by using sp tool?
with that im getting the Brom error
nivekfr said:
how? by using sp tool?
with that im getting the Brom error
Click to expand...
Click to collapse
Try to find PC Drivers for your phone.
UltraWelfare said:
Try to find PC Drivers for your phone.
Click to expand...
Click to collapse
already did that
it is recognizing as mediatek usb preloader vcom port
but still the same error appears
===================================
EDIT: i tried to lod factory while USB is on
- re installed ADB drivers and pdanet
= was able to get info in mtk droid tools
Harware:mt6572
model:
buildnumber:
build date: 19700101-000000
Android v:
baseband v:
kernel: 3.4.5([email protected])(gcc version 4.6.x-google 20120106(prerelease) (GCC)) #1 SMP Fri Nov 29 21:23:15 CST 2013
Ubootbuild v: ----should be root shell
LCD Driver IC: 1-hx8389b_dsi_vdo
-----------------------------------
thanks for the reminder
but what am i supposed to do now download mt6572 ROMS?
ok so i've downloaded a mt6572 rom and it flashed
-after flashing i tried to power the device and the LOGO is NOT inverted anymore yay
-but its still stuck on the logo somehow =(
-what can i do next?
Hi there, this is my first thread in the forum as a newbie..
My problem is flashing related.
Actually my friend has itel it1520 which had some software problem.. and got stuck at the itel logo at startup... And no automatic rebooting (no boot loop) it stucked.... At logo... So we thought to flash ROM and install stock version.. so I downloaded stock ROM.. and installed drivers.. then i open SP Flash Tool and loaded the MT6735 Scatter file from the Firmware... What i got there is I can't format the data or download the stock ROM .. it stucked at 0% and gaev me error for unable to download or something... I am not a pro.. in installing software in android.. but I came to conclusion that there are 2 more stock ROM available for different build number... So maybe wrong ROM for the phone.... But I can't open the phone.. and it's chip/ic doesn't have build number written... I tried TWRP but it doesn't shows connected or not.. now I want to find the build number please help me with finding it.. or if I am doing something wrong please redirect me..
Actually my friend also went to service center that said softaware not supported need to change the mother board... ????