Related
Hi all, I hope you guys can help as I'm coming up blank here after days of trying to fix this.
First, yes I read this thread and a few people were reporting the same problem but the solution was always to flash a stock firmware with odin.
Right now my wife's phone is stuck in a boot loop, she doesn't do anything out of the ordinary with it, I rooted it when she first got it 3 months ago and then flashed a stock kernel to get rid of the yellow triangle and it has worked perfectly until last week when she told me it was stuck at the galaxy s2 logo. No problem I though, I'll just flash a stock rom with odin and all will be well.
Well it didn't work out that way, I've flashed the original firmware, an ICS leak, Villainrom 1.1 and XXKI3 multiple times, with and without pit file + re-partition. I've flashed the old bootloader and I've tried a few custom kernels as well, and multiple combinations of the above. Nothing is getting it past the boot loop. The only result I've had that is any different to how I started is with an ICS build I got a screen saying kernel panic upload (or something like that, I don't have that rom flashed at the moment). When I connect at this time odin recognises the phone so I guess it's in download mode.
I can't get into recovery mode so I can't do a factory reset, when I press vol-up, home and power I get a blank screen for a moment followed by the same boot loop. I can get into download mode and odin is reporting successful on every flash. When I flash a custom rom or kernel I get the yellow triangle, it goes away when I flash a stock rom or kernel.
According to my wife just before the crash android market reported updates available and she installed them. I don't know if that's related or not but she says when she went back to the phone it had hung so she turned off the phone, upon turning it on it was stuck in boot (the big animated purple S part of the boot) so she removed the battery and since then it doesn't get past the initial galaxy S2 screen, sometimes, depending on which kernel it's on, the galaxy screen goes blank for a second or two and then the logo comes back.
I've really tried everything I can think to try, warranty isn't really an option as I'm in Saudi Arabia and I've been told it will take 3 months to get the phone back, also I can't easily access a jig, I'd have to make one and I'm not too confident in my ability to do that.
If anyone has any ideas at this point please help, I can't think of anything else I can do here.
tl;dr random boot loop, tried flashing everything I can find, no recovery mode but download mode works fine, help!
davegene said:
If anyone has any ideas at this point please help, I can't think of anything else I can do here.
Click to expand...
Click to collapse
Flash a full wipe firmware and see if that helps, if you need one there is a link at the bottom of my insecure kernel thread.
Thanks Odia,
I just flashed the firmware at the bottom of your thread, I9100XWKE7_CL215725_REV02_user_low. Tried it twice for good measure.
Unfortunately nothing has changed on the phone, still can't get into recovery or past the galaxy s2 logo.
davegene said:
Thanks Odia,
I just flashed the firmware at the bottom of your thread, I9100XWKE7_CL215725_REV02_user_low. Tried it twice for good measure.
Unfortunately nothing has changed on the phone, still can't get into recovery or past the galaxy s2 logo.
Click to expand...
Click to collapse
Have you tried with repartition and update bootloader ticked?
I didn't tick either of those this time but I have ticked repartition with a different firmware that came with a pit file. Do I need a pit file or can I tick repartition without it?
Sent from my GT-I9100 using XDA App
davegene said:
I didn't tick either of those this time but I have ticked repartition with a different firmware that came with a pit file. Do I need a pit file or can I tick repartition without it?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
You need a pit file, use the 1 from the other firmware.
Ok, I just tried XWKE7 again with a pit file with re-partition ticked. Also tried flashing the old bootloader again with update bootloader ticked.
No change I'm afraid.
davegene said:
Ok, I just tried XWKE7 again with a pit file with re-partition ticked. Also tried flashing the old bootloader again with update bootloader ticked.
No change I'm afraid.
Click to expand...
Click to collapse
Most strange, look like your off to service
That's most unfortunate, I'm in Saudi Arabia and they have quoted 3 months to get the phone back under warranty although in reality I'd be lucky to get it back at all.
Are my options really exhausted or is there anything extreme I can try?
I ended up making a jig and took it for warranty repair and they were able to do it locally, it only took a few days.
The curious thing is even though I repartitioned several times using two different pit files the sdcard partition was still intact.
I'm pretty sure I was doing it right and the yellow triangle was coming and going as I was flashing stock and custom kernels so the flashes were taking.
I don't speak Arabic so I couldn't ask how they fixed it but what do you think was the problem? I was very surprised to find the data intact, it even had the same stock ROM that I flashed before I took it for service still installed.
Anyway thanks for your help in this thread odia.
Sent from my GT-I9100 using xda premium
I'd love to know what they did.
Sent from my GT-I9100 using XDA App
Hi Guys
New YP-G70 owner.. love it so far, but I have a few questions:
-Am I right in thinkiing I can do anything with it as i can with a SGS apart from make a phone call, such as mod it, flash it and custom it with EX Launcher, Cyanogen or anything from the Google Market.
- Does anyone know what the latest English language firmware. I found this on SamFirmware,
http://www.sammobile.com/firmware/?p...70&r=1#regiona
but the 2.3.6 are for italy and sweden, when i do a search for UK firmware, the latest one is 2.3.5.. XXKPF, which says France.. can anyone advise.
Thanks
In this thread u can find a file with the update:
http://forum.xda-developers.com/showthread.php?t=1559214&highlight=2+3+6
I booted up odin 1.85, installed the win 7 drivers, and tried to flash the rom, but its now stuck in download mode and it has no removable battery
How do i hard reset it.
Any advice
NightOrchid said:
I booted up odin 1.85, installed the win 7 drivers, and tried to flash the rom, but its now stuck in download mode and it has no removable battery
How do i hard reset it.
Any advice
Click to expand...
Click to collapse
Hold the power button until it restarts.
Sent using Tapatalk
klin1344 said:
Hold the power button until it restarts.
Sent using Tapatalk
Click to expand...
Click to collapse
Yeah, i did that.. it now shows me a mini phone, a computer with an orange triangle in the middle of them and pressing the power button just resets to that but it does detect it in windows and odin, it just stops with "ID3 Connection" when i try to flash 236
Ive just got this today.. can anyone help..please
Is it Bricked?. Will leaving it on to drain the battery help?.
Also, is there a recovery file for it. My version is a YP-G70CW, which i believe is the international version.
Any advice
you need to find the stock ROM & use ODIN to install via download mode. All the info you need are in these forums, I did a search for your model & stock rom I got this. Or search the dev forums.
http://forum.xda-developers.com/showthread.php?t=1574207
RMXO said:
you need to find the stock ROM & use ODIN to install via download mode. All the info you need are in these forums, I did a search for your model & stock rom I got this. Or search the dev forums.
http://forum.xda-developers.com/showthread.php?t=1574207
Click to expand...
Click to collapse
It wont go into download mode.. Its stuck on a black screen with a small phone, a small computer and an orange caution triangle inbetween the 2, but it is detected in odin, I get the yellow com3 port up and ID:3 Added, in the main window. When I start it begins the download, but gets stuck at "ID:3 setupconnection
Any advice or am i missing something here
NightOrchid said:
It wont go into download mode.. Its stuck on a black screen with a small phone, a small computer and an orange caution triangle inbetween the 2, but it is detected in odin, I get the yellow com3 port up and ID:3 Added, in the main window. When I start it begins the download, but gets stuck at "ID:3 setupconnection
Any advice or am i missing something here
Click to expand...
Click to collapse
That is download mode. You messed up slightly bad to get that as download mode. which file are you using in ODIN & which option are you using? as in, pitt, pda, etc....
RMXO said:
That is download mode. You messed up slightly bad to get that as download mode. which file are you using in ODIN & which option are you using? as in, pitt, pda, etc....
Click to expand...
Click to collapse
I didnt use a .pit file, I just used the XXKPH file in PDA here:
http://forum.xda-developers.com/showthread.php?t=1574207
then clicked start and it failed, now its just sitting there as mentioned, but i have downloaded the 8gig international..235.pit file, i just havent done anything yet.
What should i do next?
Ok, had a dig around and I need to flash a kernel as well as the KPH file.
http://forum.xda-developers.com/showthread.php?t=1574207
Is there a kernel available for stock KPH and do i need to use the .pit.
Thanks
Thank god.. Its Done.. Yep, its fixed through hard work, reading around, following advice given and much diligence. In the download mode I mentioned, I flashed using rjs Kernel which got it bootlooping, then flashed KPF in ODIN.. had to flash KPF twice, wiped Cache part > Dalvik Cache, fact. reset and reboot.. all done.
Because this has a built in battery, ill not be doing this again through odin.. ill use KIES, even if i have to wait 3 months for the release.
Its now 4.30am and im off to bed.
Thanks
Update... Im now on KPH236
Some questions about that flash:
When the flashing failed and i held holding the power button down for 10 seconds, thats when it booted into the other download mode (phone, triangle, PC), so would i be right in thinking this works like flashing a SGS and what bricks it would be:
- Installing US firmware on my EU player.
- Installing bootloaders for no reason or anything rom-wise from a SGS
- pulling the USB cable out when flashing OR closing down ODIN.
- Geting impatient and pressing/holding down buttons when still in download mode or flashing.
A few other questions:
- Is there anything else that I could do to protect it against a brick.
- As this is not a phone, can I go back to 235 if i want, just use ODIN with XXKPF 235 in PDA.
- If i do go back, Will I have to replace rjs kernel first with stock KPF kernel, then flash KPF ROM or can i just flash the rom and it will overwrite rjs.
- Googles search by voice doesnt work unless its wifi'd, as in finding something in the player like a song, a memo or contacts name, it just "connection problem" .. Is that normal, yet runs fine with wifi on.
The reason Im asking is because Kies keeps telling me there is a connection problem when i plug it in and it wont detect it.. Is this due to rjs kernel or is there another issue, just to put my mind at rest.
Thanks
NightOrchid said:
Update... Im now on KPH236
Some questions about that flash:
When the flashing failed and i held holding the power button down for 10 seconds, thats when it booted into the other download mode (phone, triangle, PC), so would i be right in thinking this works like flashing a SGS and what bricks it would be:
- Installing US firmware on my EU player.
- Installing bootloaders for no reason or anything rom-wise from a SGS
- pulling the USB cable out when flashing OR closing down ODIN.
- Geting impatient and pressing/holding down buttons when still in download mode or flashing.
A few other questions:
- Is there anything else that I could do to protect it against a brick.
- As this is not a phone, can I go back to 235 if i want, just use ODIN with XXKPF 235 in PDA.
- If i do go back, Will I have to replace rjs kernel first with stock KPF kernel, then flash KPF ROM or can i just flash the rom and it will overwrite rjs.
- Googles search by voice doesnt work unless its wifi'd, as in finding something in the player like a song, a memo or contacts name, it just "connection problem" .. Is that normal, yet runs fine with wifi on.
The reason Im asking is because Kies keeps telling me there is a connection problem when i plug it in and it wont detect it.. Is this due to rjs kernel or is there another issue, just to put my mind at rest.
Thanks
Click to expand...
Click to collapse
I will be extra cautious if a ROM has zImage (kernel) and/or bootloader in it. The consequence of a corrupted bootloader is obvious. A corrupted kernel can be problematic because the recovery mode comes with the kernel. If you messed up the kernel, you will loss your recovery mode as well.
Actually I hope more developers will publish their ROM in CWM flashable zip rather than Odin image. Since Odin basically dump the disk image to your device, any mistakes in the process will likely corrupt your device's partitions. In contrast, CWM flashing uses high level operations like file delete and copy to install the ROM (in most cases). It is much less risky than using Odin (if the developer knows what he is doing). Just my 2 cents.
So if i delete the "zimage" in a ROM and flash it, it will only flash the ROM? Also how do i know if it has bootloaders included?
Forgot to quote you but.... Cheers WT Ho, youve put my mind at rest and Im quite happy, that after my problems above, its not the player... rjs is nice and stable and boots really fast, so Im staying on KPH 236 and gonna upgrade through ODIN, not downgrade to KPF.. Have found the issues are with Kies not the kernel being recognised, alot of posts about Kies issues on various sites and forums. SamFirmware.com is my friend.. .
- Googles search by voice doesnt work unless its wifi'd, as in finding something in the player like a song, a memo or contacts name, it just "connection problem" .. Is that normal, yet runs fine with wifi on...
Yes you need a connection, heres why:
http://forum.openetna.com/index.php?topic=537.0
Cheers
Chris4evernoob said:
So if i delete the "zimage" in a ROM and flash it, it will only flash the ROM? Also how do i know if it has bootloaders included?
Click to expand...
Click to collapse
You can open an Odin ROM easily by using 7-zip. If it has md5, you will encounter a warning but that's fine.
For full ROM, you will see
boot.bin
cache.rfs
dbdata.rfs
factoryfs.rfs
param.lfs
Sbl.bin
zImage
Basically most custom ROMs will modify your factoryfs.rfs only. If you need a new kernel, zImage is also needed. All other files are related to boot or data partition (usually not needed). Therefore many ROMs only have zImage and factoryfs.rfs in them.
Although I haven't tried that myself, I think it is possible to just put the factoryfs.rfs in the tar file. That will be similar to the Odin package of rj's kernel, you will only see the zImage in the tar file.
Hi guys, just new to these forums. I was forced to sign up due to my problems. just about 2 days ago i flashed these to my Galaxy Note Korean unit (SHV-E160S):
Tegrak-Kernel-Build-32-for-SHV-E160S-FA09.zip
Tegrak-Kernel-Build-32-for-SHV-E160S-FA09recovery.tar
i used Odin to flash the recovery file then booted into recovery mode to flash the kernel.. im sure i did right because i was able to use superuser and change my boot animation. unfortunately i found another update to the .tar and .zip file. i'm pretty sure its for my phone too so i went ahead and did the same thing. i kinda made a mistake in the process, i think i wiped the cache and all. dunno if i wiped partition but in the end i am only able to go to recovery & download mode. the Note will power up but won't get past the "Galaxy Note" screen. after that i will just be black. it's weird because it can still connect to Odin on my laptop although the screen is still black. is it a soft-brick? right now i'm trying to download an ICS stock rom and will try flashing it with Odin. i someone can help me please do. sorry by the way if this is a Korean Galaxy Note. this is the best category i could post since the AT&T and the SHV-E160S are the same in specs and all. hope someone could help me and spare me the pain from sending my unit for repair!
Sounds like a soft brick.. it seems you flashed perhaps the wrong file the last time otherwise it would be working like the last flash? ..I don't use odin often but I would restore my backup or just start over and use the last files to flash until you find something different
yeah i tried the others. i am able to flash the 1st recovery.tar but i cant seem to copy the .zip kernel because i dont have access to usb
about to flash stock ICS using Odin, hope this works! i just have one file which is a .tar file, hope this is the right file and don't brick!
OMG, i just pissed my pants *kidding*, the flashing of the stock ROM worked! and not onl that, i'm on ICS! all thanks to xda=developers forum for giving me the idea to flash a stock ROM! thanks guys! i'll never root my phone again i'd rather stay safe. thanks for the reply friend! ICS rocks!
Could you give me stock ics rom for e160s? thanks
chelsea123 said:
Could you give me stock ics rom for e160s? thanks
Click to expand...
Click to collapse
WRONG FORUM
plz search next time
at least
or use google
SMDH
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Hi Marcus,
I had the same problem few days back.
If it's not broken by you trying something fancy, the best solution is to take it to service centre. If you have rooted your device, had installed some custom firmware or are not willing to visit the service centre for some other reason, please read ahead.
All I did was,
Installed USB connectivity drivers through Kies.
Installed ODIN 1.83
Ensured that Kies or any of its processes are not running in background.
Downloaded the official SGS2 firmware
Flashed the firmware through ODIN.
It took around 10 minutes for the full process and I was having my mobile up and running. Using ODIN sounds scary initially if you haven't used it. I have slowly started gaining confidence in it after using it a few times.
Please note that though the process is well proven to be safe, there is still an amount of risk involved.
Sent from my GT-I9100
Download a siyah kernel(like v4.0.1) .tar file and flash through odin.
See if that makes it boot/lets you into recovery.
Adarzannh said:
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
I appreciate all of your answers!
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
<ID:0/003> NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
mananbdesai: where do I find the "official SGS2 firmware"?
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
marlu873 said:
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
Click to expand...
Click to collapse
A couple of things..ensure KIES is not running on your computer in the background. If possible delete it completely. Also ensure your phone is connected to a USB port directly on the computer and not via a hub or to a USB port on a keyboard or something. Odin is a finicky s/w..so..
Also, try different versions. If v1.85 doesn't work try v3.4
marlu873 said:
mananbdesai: where do I find the "official SGS2 firmware"?
Click to expand...
Click to collapse
Go to sammobile.com or a sticky in the Original Android Development section here..has links to all the stock firmwares.
marlu873 said:
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
Click to expand...
Click to collapse
Lol at underlining. if you flash a custom kernel like siyah, you'll be rooted and get CWM. Using that you can install a custom ROM.
Sent from my GT-I9100 using xda app-developers app
And youll be safe from the 4.0.4 brickbug if you flash siyah.
You flash a kernel for various reasons like it has emmc cap disabled,you can tweak it etc.
You can flash siyah kernel and stop there.Or you can move onto a custom rom.
Whatever,when its done-backup your efs and make a nand backup.
And yesterday I was downgrading my wifes phone onto 4.0.3.I was using odin and kept getting "failed".After 3 attempts I realised I hadnt put the phone into download mode..........how stupids that......lol
hi there, just wondering, after Flashing the stock firmware through ODIN, do you lose everything in your phone? i need to get all the notes that I have in my phone (notes from the samsung stock apps). I dont have any external sd card in the phone. thanks in advance for the reply.
enquiry
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Hi there sir,
Has the problem solved ? Care to share the solution ?
Thanks.
i had the same exact problem, i tried flashing with odin n stock firmware but stuck in NAND write start, i didnt try flashing with PIT & repartition though, i couldnt be bothered anymore, so i took it to samsung service plaza, they told me the problem is in the main PCB (hardware issue), so all they did was replace that n it got fixed! i didnt pay because it's still under contract/ carrier warranty
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
it seems for some strange reason the phone wont turn on now. Wheni plug it in i get the blue flashing dot but its faint. Tried download mode and nothing.
same problem
araz.rozh said:
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
my phone is stuck at the bootlogo too. but mine is rooted n running on biftor rom (jellybean) pls how do i flash with odin? thanks
help pls.
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
tatchero said:
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
Click to expand...
Click to collapse
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Flash-IS-Bright said:
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Click to expand...
Click to collapse
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
peshmann said:
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
Click to expand...
Click to collapse
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Sun90 said:
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Click to expand...
Click to collapse
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
peshmann said:
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
Click to expand...
Click to collapse
You could try flashing hawkerpaul's kernel wiper first and then install another stock kernel like PhilZ or Apollo, and see if that helps.
Neat Rom lite,suddenly struck in boot loop after 1 month of operation.
Dear All,
I have installed the "I9100XWLSZ_NeatROM_Lite_v5.0.1" custom rom and after 1 month of successful usage, today suddenly the phone was dead.(probably due to autoupdates over wifi) . I tried to reboot, but didnt. Tried to restart but got stuck in the logo screen with yellow triangle.
Tried to enter recovery mode, but no use. Only download mode is possible.
Tried to flash the stock rom using odin, but no use, Nand write failed.
Can somebody help me how to come out of this situation. Shall I install a different kernal and see?
Regards,
Maka11
I have a Samsung Galaxy S3 (GT-19300) international version. I rooted it last night. Took a custom backup of ROM and backup using Titanium backup. I installed cyanogenmod 9 on it today. It was working perfectly. Then when i installed Google apps (gapps) and restarted it got stuck on the bootscreen. I hardbooted and now all i see is this fuzzy black n white screen ( like static). I tried going into clockworkmod recovery but still the same screen. However, i can still go to odin mode.
So i guess i have to install stock firmware through odin now. But i'm unable to download the firmware. All links are on hotfile and as everyone knows , it sucks :/ download stops after 2 min. Cant find a mirror also.
Any ideas what to do? have u guys also encountered a similar problem?
Can someone download and send the firmware file to me somehow(anysend or wetransfer or something)? iv tried downloading it many times but failed
Lohit13 said:
I have a Samsung Galaxy S3 (GT-19300) international version. I rooted it last night. Took a custom backup of ROM and backup using Titanium backup. I installed cyanogenmod 9 on it today. It was working perfectly. Then when i installed Google apps (gapps) and restarted it got stuck on the bootscreen. I hardbooted and now all i see is this fuzzy black n white screen ( like static). I tried going into clockworkmod recovery but still the same screen. However, i can still go to odin mode.
So i guess i have to install stock firmware through odin now. But i'm unable to download the firmware. All links are on hotfile and as everyone knows , it sucks :/ download stops after 2 min. Cant find a mirror also.
Any ideas what to do? have u guys also encountered a similar problem?
Can someone download and send the firmware file to me somehow(anysend or wetransfer or something)? iv tried downloading it many times but failed
Click to expand...
Click to collapse
Have you tried downloading the firmware from Sammobile? If you haven't I would recommend taking a look at this link here for the official firmwares for the International Model Galaxy S3, after you have selected your country and carrier, you can download the firmware and flash it through Odin. Let me know if you still have questions .
Thanks for the fast reply
Thats the problem, everytime i try downloading the firmware it just stops in the middle. Anyway, i got the 4.2.2 firmware for my mobile. I tried flashing that, it said no partitioning. So i tried re-partitioning with the .PIT file. But it get stuck on 'Get PIT mapping' with 'SET PARTITON' in white on the box above (COM)port. Doesnt go further. How do i fix it?
Lohit13 said:
Thanks for the fast reply
Thats the problem, everytime i try downloading the firmware it just stops in the middle. Anyway, i got the 4.2.2 firmware for my mobile. I tried flashing that, it said no partitioning. So i tried re-partitioning with the .PIT file. But it get stuck on 'Get PIT mapping' with 'SET PARTITON' in white on the box above (COM)port. Doesnt go further. How do i fix it?
Click to expand...
Click to collapse
Make sure you have loaded the partition file into the .pit file slot. Also I would recommend taking a look at this procedures "How to Proceed" section (Make sure to substitute the correct file's for your device and don't worry about the multi-CSC part of the procedure) on what to do if you get stuck at the "Get PIT mapping" section.
i tried in xp mode too. no luck.
then i tried with odin 1.85 instead of 3.07. Now it doesnt show Get PIT Mapping. It shows 're-partition failed'. I guess thats some progress
But its still a no go for phone. Any idea how to fix it?
I was thinking of flashing the CWM recovery again and try to go to recovery mode. Should i or is it too risky?
I'm also gonna try flashing with the recovery firmware i found on the forum today...