Related
Okay so I just had this problem and I don't want anyone getting stuck on it and not knowing how to fix it. I decided to write a quick guide for everyone.
Steps
Boot phone into "Boot Android (No BP)" by holding the Volume Down key and the Power button.
Press the Volume Down button until you see "Boot Android (No BP)"
Press the Volume Up button and wait.
Hold the Power button once its on and press Airplane Mode.
Reboot the device.
Skip the Error Message about not being able to activate. (Keep Airplane Mode on)
Open Sprint Zone app.
Activate through Sprint Zone. (When prompted to exit Airplane Mode, say yes.)
Thanks: thaisport_sf & w0lf215
I had to do that exact same thing a few months ago, twice... I'm glad to see someone took the time to document this... Now I know where to look when I do it again...
ZeroManArmy said:
Okay so I just had this problem and I don't want anyone getting stuck on it and not knowing how to fix it. I decided to write a quick guide for everyone.
Steps
Boot phone into "Boot Android (No BP)" by holding the Volume Down key and the Power button.
Press the Volume Down button until you see "Boot Android (No BP)"
Press the Volume Up button and wait.
Hold the Power button once its on and press Airplane Mode.
Reboot the device.
Skip the Error Message about not being able to activate. (Keep Airplane Mode on)
Open Sprint Zone app.
Activate through Sprint Zone. (When prompted to exit Airplane Mode, say yes.)
Thanks: thaisport_sf & w0lf215
Click to expand...
Click to collapse
This wont work for me as I am using an International GSM. Dont have access to sprint. I have to delete / rename SprintOMADM* in /system/app location..
androiderb89 said:
This wont work for me as I am using an International GSM. Dont have access to sprint. I have to delete / rename SprintOMADM* in /system/app location..
Click to expand...
Click to collapse
Do you have a way to fix it so I can add it?
Huge thanks! Conveniently enough, I saw this right as it happened to me. lol
I get stuck on "Contacting Network" during a PRL/Profile update, but I am able to exit by clicking on an app(IMO beta) on the notifications pull down, and pressing home. I am activated, just want to update the data profiles.
Plancy, press ##786# on your phone. Whats your HW version?
Accidental formatting of Internal SD through CWM
I have run into this problem before where the boot logo is erased saying that it will "cold-boot" into Linux. The only problem is that when I SBF to get back to stock, the photon wouldnt update the PRL or the data profile. The only remedy I have found is that I need to restore the PDS partition from a nandroid backup after unlocking again. Doing so rendered the green hands-free activation screen. Hope that helps anyone.
hoslayer13 said:
I have run into this problem before where the boot logo is erased saying that it will "cold-boot" into Linux. The only problem is that when I SBF to get back to stock, the photon wouldnt update the PRL or the data profile. The only remedy I have found is that I need to restore the PDS partition from a nandroid backup after unlocking again. Doing so rendered the green hands-free activation screen. Hope that helps anyone.
Click to expand...
Click to collapse
I don't have a nandroid backup, how can I restore the PDS partition? I get stuck on "Contacting Network" during PRL or Data Profile Update on any ROM All 198_7SBF'd Locked/Unlocked Rooted/Unrooted
This is a fix from the Atrix forum that might be able to help. I haven't tried it but the OP mentioned that method 1 was a universal fix, although not sure if meant as a multi-device fix. Best of luck, worst case scenario is having to shell out 35$ for a replacement
hoslayer13 said:
This is a fix from the Atrix forum that might be able to help. I haven't tried it but the OP mentioned that method 1 was a universal fix, although not sure if meant as a multi-device fix. Best of luck, worst case scenario is having to shell out 35$ for a replacement
Click to expand...
Click to collapse
Thanks , but I dont really want to chance it unless a someone can verify that it's universal.
Plancy said:
Thanks , but I dont really want to chance it unless a someone can verify that it's universal.
Click to expand...
Click to collapse
No problem. Have you checked what your HW version was by chance to see if it was the PDS that borked? Normally it would say P30A, or at least that's what it shows on both Photons that I have.
Edit: The one I messed with said it was unavailable.
hoslayer13 said:
No problem. Have you checked what your HW version was by chance to see if it was the PDS that borked? Normally it would say P30A, or at least that's what it shows on both Photons that I have.
Edit: The one I messed with said it was unavailable.
Click to expand...
Click to collapse
Webtop version is unavailable, can't find "Hardware".
I'm running ROCK2.4
ZeroManArmy said:
Okay so I just had this problem and I don't want anyone getting stuck on it and not knowing how to fix it. I decided to write a quick guide for everyone.
Steps
Boot phone into "Boot Android (No BP)" by holding the Volume Down key and the Power button.
Press the Volume Down button until you see "Boot Android (No BP)"
Press the Volume Up button and wait.
Hold the Power button once its on and press Airplane Mode.
Reboot the device.
Skip the Error Message about not being able to activate. (Keep Airplane Mode on)
Open Sprint Zone app.
Activate through Sprint Zone. (When prompted to exit Airplane Mode, say yes.)
Thanks: thaisport_sf & w0lf215
Click to expand...
Click to collapse
If you're not with Sprint, then you just follow the above AND also delete these files:
SprintOMADMConnMOPlugin.apk
SprintOMADMConnMoPlugin.odex
They're found under System/app and you need Root Explorer to delete the file(s). At the top, you tap on "Mount..." and then you'll be allowed delete these files. To delete, simply long press the files and choose delete. Some might only find one of the above files (if they have a custom ROM).
Someone showed this trick to me, so... I can only take credit for being the messenger
Hmm doesn't look like anyone knows how to help I really want to update.
coolqf said:
If you're not with Sprint, then you just follow the above AND also delete these files:
SprintOMADMConnMOPlugin.apk
SprintOMADMConnMoPlugin.odex
They're found under System/app and you need Root Explorer to delete the file(s). At the top, you tap on "Mount..." and then you'll be allowed delete these files. To delete, simply long press the files and choose delete. Some might only find one of the above files (if they have a custom ROM).
Someone showed this trick to me, so... I can only take credit for being the messenger
Click to expand...
Click to collapse
When do they delete the files? Which step?
Gonna have to ask around on how to fix the PDS partition or restore it.
ZeroManArmy said:
Okay so I just had this problem and I don't want anyone getting stuck on it and not knowing how to fix it. I decided to write a quick guide for everyone.
Steps
Boot phone into "Boot Android (No BP)" by holding the Volume Down key and the Power button.
Press the Volume Down button until you see "Boot Android (No BP)"
Press the Volume Up button and wait.
Hold the Power button once its on and press Airplane Mode.
Reboot the device.
Skip the Error Message about not being able to activate. (Keep Airplane Mode on)
Open Sprint Zone app.
Activate through Sprint Zone. (When prompted to exit Airplane Mode, say yes.)
Thanks: thaisport_sf & w0lf215
Click to expand...
Click to collapse
THANK YOU VER MUCH, you save me from calling Sprint. thank you
The first chance they get. They have to be removed before they reboot the phone, or when they boot normally they will get the activation message. This replaces your activation step for people whom do not have sprint.
Sent from my Photon
ZeroManArmy said:
Okay so I just had this problem and I don't want anyone getting stuck on it and not knowing how to fix it. I decided to write a quick guide for everyone.
Steps
Boot phone into "Boot Android (No BP)" by holding the Volume Down key and the Power button.
Press the Volume Down button until you see "Boot Android (No BP)"
Press the Volume Up button and wait.
Hold the Power button once its on and press Airplane Mode.
Reboot the device.
Skip the Error Message about not being able to activate. (Keep Airplane Mode on)
Open Sprint Zone app.
Activate through Sprint Zone. (When prompted to exit Airplane Mode, say yes.)
Thanks: thaisport_sf & w0lf215
Click to expand...
Click to collapse
THANKS soooooooooooooooooooooooooo many many much bro!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!111 i love you man hahahaa... u saved me from paying $119 thanks
Hello experts,
I am not able to get into Download Mode with my Mega 6.3 running stock Android 4.2.2!
What I've triedwith phone powered down)
* Vol down + Home + Power ---> phone vibrates, display comes alive from black to grey and gets black again and shuts down (buttons still pressed; if I release any one button, normal booting is the result)
* Vol down + Power ---> same as above
* battery out, Vol up + Vol down, connect with USB-cable to PC (with Odin running and tar-file inserted) ---> same as above but battery charging symbol appears
Any suggestions are very well appreciated!!!
ullebaer said:
Hello experts,
I am not able to get into Download Mode with my Mega 6.3 running stock Android 4.2.2!
What I've triedwith phone powered down)
* Vol down + Home + Power ---> phone vibrates, display comes alive from black to grey and gets black again and shuts down (buttons still pressed; if I release any one button, normal booting is the result)
* Vol down + Power ---> same as above
* battery out, Vol up + Vol down, connect with USB-cable to PC (with Odin running and tar-file inserted) ---> same as above but battery charging symbol appears
Any suggestions are very well appreciated!!!
Click to expand...
Click to collapse
Will your mega actually boot and run? If so I'd suggest, of your rooted downloading something like quick boot or another menu boot app that will automatically be reboot you into download mode. Also make sure when you hold the buttons that you hold volume down and home then press and hold power. Sometimes phones can be a bit wonky with button commands
Mega
megalomanic14 said:
Will your mega actually boot and run? If so I'd suggest, of your rooted downloading something like quick boot or another menu boot app that will automatically be reboot you into download mode. Also make sure when you hold the buttons that you hold volume down and home then press and hold power. Sometimes phones can be a bit wonky with button commands
Mega
Click to expand...
Click to collapse
My Mega will boot and run normally! It is not rooted and therefore Quick Boot or any other Menu Boot App unfortunately won't work!
And I tried a gazillion times the button combination...
Any other tips???
ullebaer said:
My Mega will boot and run normally! It is not rooted and therefore Quick Boot or any other Menu Boot App unfortunately won't work!
And I tried a gazillion times the button combination...
Any other tips???
Click to expand...
Click to collapse
Adb command to force boot to download but that's pretty advanced tbh...and you can't root without download mode....maybe do a hard reset and see if that helps
Mega
---------- Post added at 02:30 PM ---------- Previous post was at 02:27 PM ----------
megalomanic14 said:
Adb command to force boot to download but that's pretty advanced tbh...and you can't root without download mode....maybe do a hard reset and see if that helps
Mega
Click to expand...
Click to collapse
Damn dude that's a weird issue honestly... im trying to think of another way... Try doing the home and volume down then power from your home screen... im guessing you've only tried from being powered off?
megalomanic14 said:
Adb command to force boot to download but that's pretty advanced tbh...and you can't root without download mode....maybe do a hard reset and see if that helps
Mega
---------- Post added at 02:30 PM ---------- Previous post was at 02:27 PM ----------
Damn dude that's a weird issue honestly... im trying to think of another way... Try doing the home and volume down then power from your home screen... im guessing you've only tried from being powered off?
Click to expand...
Click to collapse
Tried it frome Homescreen... no success:crying:
ullebaer said:
Tried it frome Homescreen... no success:crying:
Click to expand...
Click to collapse
You've gotta hold home and volume down,...then press and hold power usually hold all 3 for like 10 or so seconds until it reboots, keep holding and bam.
Again no succsess! If I hold Vol down + Home and then press Power (from Homescreen) the phone shuts down and stays that way no matter how long I press/hold the buttons... The moment I release the buttons the phone boots normal!
I tried other buttons:
Vol down & up ---> phone starts in "Secure Mode"
Vol up ---> phone starts in "Recovery Mode" (can I use this mode for rooting?)
I am absolutely frustrated... but thanks for your help!!!
It all sounds quite a lot like a problem that I have. My screen broke and when the phone came back from service, my download mode was gone. It turned out that it was just blank graphically. One problem is that that when you enter download mode normally, you let go of the buttons when you see the graphics. If you keep pressing the buttons, then the device restarts after a while. I wonder if you can time it so that you enter download mode ( if your problem is the same as mine) and then press power and then volume up (the normal way to set download mode to receive flash) and then see if Odin recognizes the phone? I ordered a JIG to see if that would give me graphics in download mode, but it didn't. It worked the same way as the "blind key combo" so I tried flashing despite no graphics and it worked as it should. It felt a bit scary flashing through a broken download mode but I did it... That's my story
You can use Wanam Xposed (you have to be rooted and have installed Xposed Framework). In Wanam -> System you will find future 'Enable 4 way reboot menu'. Tick it and in 'Power switch menu' under 'Restart' you will find 4 Reboot options:
- Reboot
- Recovery
- Hotbot
- Download
It could resolve your problem, at least temporarely.
Of course there will be not 'download mode graphic' either but you can be sure so you are REALLY in download mode
Ullebear stated that his/her phone is not routed, so maybe Kingo root would be a good idea. I haven't tried it but I'm fairly certain it does not require you to be in download mode for the rooting process. Xposed and Wanam-stuff can be applied after that in order to more easily reach download mode without having to time the button pressing combo.
Please ullebear, let us know how it goes. I'm really curious about whether your problem is of the same nature as mine.
Kingo Root is working flawlessly on Mega GT-I9205, I have checked it myself.
Hi just get on ebay a download jig for 2 dollar or so..turn off your phone and put the jig in and presto auto download mode....
Works on my mega had one for a galaxy s i had to fix with the same problem.
click here for example
Beurtmans said:
Hi just get on ebay a download jig for 2 dollar or so..turn off your phone and put the jig in and presto auto download mode....
Works on my mega had one for a galaxy s i had to fix with the same problem.
click here for example
Click to expand...
Click to collapse
From the trade in which you wrote I assume so this dongle is working on Mega. Am I right?
trurl3 said:
From the trade in which you wrote I assume so this dongle is working on Mega. Am I right?
Click to expand...
Click to collapse
Jup tested it before posting.
Normaly you have to push volume up to continue but not with the jig you go straight into download mode.
Hello everybody...
In fact my phone wasn't able to go into "Download Mode" after getting it back from a repair of my display! I guess the authorized Samsung repair changed something in the firmware which always gave me a blank screen after pressing the correct button combination...
As suggested, I tried to go blindly into "Download Mode" by pressing Vol Up at the blank screen, but it didn't work
So here finally my solution (Kingo Root was too "suspicious" for me):
I ordered a USB Jig via Ebay compatible with Samsung Galaxy S2, S3 and Note (Mega was not listed as a supported type) for 2 bucks.
I powered down the handy and inserted the Jig ---> blank screen (but I hoped it would be the "blanked" warning screen before "Download Mode").
I pressed Vol Up, opened Odin, disconnected the Jig and connected the Mega via USB with the PC.
From there everything went smoothly Phone was recognized and I was able to root with installation of SuperSU!
Thanks for all you help - you are a great forum with very helpful members!!!
By the way: I am from Germany and my phone came preinstalled with French firmware!
ullebaer said:
Hello everybody...
In fact my phone wasn't able to go into "Download Mode" after getting it back from a repair of my display! I guess the authorized Samsung repair changed something in the firmware which always gave me a blank screen after pressing the correct button combination...
As suggested, I tried to go blindly into "Download Mode" by pressing Vol Up at the blank screen, but it didn't work
So here finally my solution (Kingo Root was too "suspicious" for me):
I ordered a USB Jig via Ebay compatible with Samsung Galaxy S2, S3 and Note (Mega was not listed as a supported type) for 2 bucks.
I powered down the handy and inserted the Jig ---> blank screen (but I hoped it would be the "blanked" warning screen before "Download Mode").
I pressed Vol Up, opened Odin, disconnected the Jig and connected the Mega via USB with the PC.
From there everything went smoothly Phone was recognized and I was able to root with installation of SuperSU!
Thanks for all you help - you are a great forum with very helpful members!!!
By the way: I am from Germany and my phone came preinstalled with French firmware!
Click to expand...
Click to collapse
Hi glad the jig worked for you its a cheap and simple solution.
I have a fairly generic Chinese tablet, a Neutab N7 (not a Nexus 7), but I have no idea how to enter the bootloader/fastboot mode.
Using adb, "adb reboot bootloader" or "adb reboot-bootloader" just makes it reboot normally.
From a shell, doing "su reboot bootloader" also reboots normally.
I tried Quick Boot from Google Play which has an option to reboot into the bootloader, but it also just ends up rebooting normally.
While powered off, I tried holding power and volume up, power and volume down, and power and both volume up and down, but they all just boot normally.
Doing "adb reboot recovery" does boot me into recovery mode, but the menu doesn't have a bootloader/fastboot option.
Does anyone have any idea how to enter the bootloader/fastboot mode for this tablet? Any help would be appreciated.
knismaps said:
I have a fairly generic Chinese tablet, a Neutab N7 (not a Nexus 7), but I have no idea how to enter the bootloader/fastboot mode.
Using adb, "adb reboot bootloader" or "adb reboot-bootloader" just makes it reboot normally.
From a shell, doing "su reboot bootloader" also reboots normally.
I tried Quick Boot from Google Play which has an option to reboot into the bootloader, but it also just ends up rebooting normally.
While powered off, I tried holding power and volume up, power and volume down, and power and both volume up and down, but they all just boot normally.
Doing "adb reboot recovery" does boot me into recovery mode, but the menu doesn't have a bootloader/fastboot option.
Does anyone have any idea how to enter the bootloader/fastboot mode for this tablet? Any help would be appreciated.
Click to expand...
Click to collapse
why do you want to enter the bootloader? and have they made any roms or cwm recovery for these types of generic android tablets?
[RESOLVED] finally, ROOT for Neutab N7 pro tablet.
knismaps said:
I have a fairly generic Chinese tablet, a Neutab N7 (not a Nexus 7), but I have no idea how to enter the bootloader/fastboot mode.
Using adb, "adb reboot bootloader" or "adb reboot-bootloader" just makes it reboot normally.
From a shell, doing "su reboot bootloader" also reboots normally.
I tried Quick Boot from Google Play which has an option to reboot into the bootloader, but it also just ends up rebooting normally.
While powered off, I tried holding power and volume up, power and volume down, and power and both volume up and down, but they all just boot normally.
Doing "adb reboot recovery" does boot me into recovery mode, but the menu doesn't have a bootloader/fastboot option.
Does anyone have any idea how to enter the bootloader/fastboot mode for this tablet? Any help would be appreciated.
Click to expand...
Click to collapse
Having been looking for this information myself i'm sharing real quick here what i've found. Scouring the net all over i've found NOTHING specific for these Chinese tablets but after finally getting on the scent of VROOT I downloaded and tried iROOT essentially a one-click rooter the .APK **DID NOT WORK** but the PC version **DID** can be found by googling iroot or vroot.
RE: bootloader, i've still found no way or any good info on entering the bootloader AFAIK this is locked and may not be possible without some good hard hacking on the firmware, I DO KNOW that if you try entering the "bootloader" with a reboot manager on the device u will find yourself at the "NeuTab" welcome screen and stuck. Fortunately at least in my experience, letting the tablet battery run down low you can boot back into it and root condition is still good.
Hope this helps somewhat I know its an old post but a lot of people have been looking for this info have yet to post on authors site confirming that the NeuTab also works with his software.
peace.
VE3UND
BTW I forgot to mention the site and the software (ALTHOUGH IT STATES OTHERWISE) is in Chinese. A leap of faith needed there I know but i confirm this method works. l8z
BTW^2 ALSO the android version was KitKat as received from the mfg, also have been told that Jellybean will install on the tablet after rooting and maybe is now included with device but don't quote me on that.
all in all a really nice tab for the price, especially now we have root biggest missing option: GPS but you can tether to another device with gps if you need to. Also no built in USB HOST MODE. //out
I've got the NeuTab N10 and can't get ADB to see it at all. How did you get ADB to work with your N7, were you able to find NeuTab ADB drivers somewhere?
So i recently came across this tablet in my stuff... something i picked up for the wife a few years back.
I also came across this website.... http://neutab.com/info-detail.php?InfoId=11
It has all the tools and programs that the company uses. includes all files for development of their entire line of tablets.
Thought this may be useful. just click on the link that says pheonixtools.zip and it will take you to a back end file server... This tablet is about as open sourced as it gets... so... this leads me to ask a question i have been struggling with for the last 2 years of being a member on this website...
can anyone... please... help me develop my first recovery and custom rom for this tablet? I just have never done it all the way... i have set up a couple things here and there... figured out how to strip the stock recovery and boot... but never got further than that.
Thanks for the help.
• Unzip phoenix tool.zip you just downloaded; (to open a .zip file, download WinRAR)
• In the folder of phoenix tool you just unzipped, depending on your system specs, select "drvinstaller_X64", "drvinstaller_x86" or "drvinstaller_IA64" to install tablet driver; Or you can run all three driver installer and at least one will work;
• Run "PhoenixSuit.exe", select "firmware" tab;
• Click on "Image" button, choose the firmware you just downloaded;
• Turn your tablet completely off (by press and hold power button for 20 seconds), press and hold "volume -" button, connect tablet to computer via usb cable, keep volume button held, press power button 10 times repeatedly；
• The phoenix tool should recognize the tablet. On pop-up dialog window, select if you want to format and wipe out everything on your tablet；
• The phoenix tool will start flash the firmware to the tablet. Wait till it is done；
• When upgrade is finished, disconnect your tablet from computer, press and hold power button for 10 seconds to quit upgrade mode. then press and hold power button for 2-4 seconds to turn tablet on；
Congratulations! Your tablet is now refreshed.
Ok so I have a NueTab Air 7 Android and I have talked toto their customer support which did neurologist absolutely no good. I have been trying to hard reset my tablet and do a factory reset by holding down the volume up and down keys and the power keys until it gives me the option of rebooting. However, there is no option for a factory reset. Only a Recovery mode, Fastboot mode, and Normal mode. I tired the Normal and Recovery an both sent me back to enter password that I can't rremember, which isthe why I'm resetting it lol. Finally I chose the Fastboot option and now it is stuck on that option and has been for almost an hour. It willwas not let me power off, try to hard reset, it is literally stuck. And it is a hundred percent charged. I do jot hav the optiontime to connectbe the tablet to acall Windows computer at this timetime, as the forums I have read say can possibly fix the issue. And what a surprise the customer service phone number for this specific tablet does not know how to fix it!!!!! Not surprised at all. If anyone at allthe has any ideas or knows what to do or howsomething to fix it please help meme. I'm very frustrated to say thethat least and in desperate need of help. Anything would be immensely appreciated. ~Melissa
How to identify the exact firmware of the N7 after this page (Oficial NEUTAB), I have 3 options but that IMEI series is nowhere in the table.
---------- Post added at 11:35 PM ---------- Previous post was at 11:35 PM ----------
this page http://neutab.com/info-detail.php?InfoId=11
n7s root
therealtaynak said:
So i recently came across this tablet in my stuff... something i picked up for the wife a few years back.
I also came across this website.... http://neutab.com/info-detail.php?InfoId=11
It has all the tools and programs that the company uses. includes all files for development of their entire line of tablets.
Thought this may be useful. just click on the link that says pheonixtools.zip and it will take you to a back end file server... This tablet is about as open sourced as it gets... so... this leads me to ask a question i have been struggling with for the last 2 years of being a member on this website...
can anyone... please... help me develop my first recovery and custom rom for this tablet? I just have never done it all the way... i have set up a couple things here and there... figured out how to strip the stock recovery and boot... but never got further than that.
Thanks for the help.
Click to expand...
Click to collapse
I would love to root this tablet purely because it's my daughter's and some of the games she likes has some real funky permissions That they want! A custom rom would be nice but I will be satisfied with being able to revoke some of the permissions that the apps want to have access to.
n7s software download issue
therealtaynak said:
• Unzip phoenix tool.zip you just downloaded; (to open a .zip file, download WinRAR)
• In the folder of phoenix tool you just unzipped, depending on your system specs, select "drvinstaller_X64", "drvinstaller_x86" or "drvinstaller_IA64" to install tablet driver; Or you can run all three driver installer and at least one will work;
• Run "PhoenixSuit.exe", select "firmware" tab;
• Click on "Image" button, choose the firmware you just downloaded;
• Turn your tablet completely off (by press and hold power button for 20 seconds), press and hold "volume -" button, connect tablet to computer via usb cable, keep volume button held, press power button 10 times repeatedly；
• The phoenix tool should recognize the tablet. On pop-up dialog window, select if you want to format and wipe out everything on your tablet；
• The phoenix tool will start flash the firmware to the tablet. Wait till it is done；
• When upgrade is finished, disconnect your tablet from computer, press and hold power button for 10 seconds to quit upgrade mode. then press and hold power button for 2-4 seconds to turn tablet on；
Congratulations! Your tablet is now refreshed.
Click to expand...
Click to collapse
I have yet to be able to download the zip or the firmware software. i got root with kingo pc version but that's pretty much it and I can't change the route manager because once I delete that then I don't have root anymore and can't add another one. Also I have yet to been able to get into or see download mode on this either. It just stays on the screen with the name on it and that's pretty much it. no bootloader unlock either
hi I hope this is posted correctly... I have a nabi 2 running kitkat that was rooted with kingo root and no twrp, everything stock besides that... I deleted something I shouldn't have and when I restarted the tablet it booted fine until it got to the home screen. as of now I have no lock screen to swipe and no home screen. The home button and back button still show and also make a click noise. so I figure to do a factory reboot and everything would be fine... well I was wrong... it still boots but still no home screen.... at times the background will flash and the time and battery will pop up.
So I downloaded nabilabs thinking that would be able to help me and I believe it will but as I found out when I did a factory reset it turned off usb debugging and will not connect now. so with out screen controls how do I turn usb debugging mode on? is there a line I can send to it to connect? thanks for the help in advanced..
I did search around and found a bunch of great software and roms for it but I really haven't found a similar issue or realized that I found something close to my issue.
Do you have a photo? That would make it easier to know what you’re describing
Your firmware may be corrupted.
I put the link to a new ROM here. If you click click the hyperlink it will be at the top of the screen. Use Fastboot to flash that.
Put Fastboot Protocol on by holding down both the volume buttons and the power button, then when the letters on the top left (held in landscape) of the screen pop up, click the volume - (down) button and then click the volume + (up) button. Your computer will now recognize the device in Fastboot. Then you can flash the ROM.
See if that helps.
Guys I need help ...this morning my phone restarted while charging and got stuck on huawei logo screen. i tried different combinations of Power + Volume up and down buttons but it didnt go to any other screen. then i installed hisuite on my PC and connected to my phone through USB cable, and holding volume down button i got to this screen which says FAST BOOT&RESCUE MODE and further reads "Phone Locked" "FRP Lock" in the end below Android logo.
i want to access my phone contents and get backup as I have important files to recover. Please I need some help with detailed step by step procedure to help me get through without damaging my phone or its content. I am hoping some nice techie can write me the steps needed to be taken considering I am a complete noob.
Try forcing your way into the recovery and clearing cache
Vol up + power without having it plugged in
Just keep it pressed for 1 min + if you have to until you see the recovery
When the phone vibrates and turns on let go of the power button so it won't cycle
Zep0th said:
Try forcing your way into the recovery and clearing cache
Vol up + power without having it plugged in
Just keep it pressed for 1 min + if you have to until you see the recovery
When the phone vibrates and turns on let go of the power button so it won't cycle
Click to expand...
Click to collapse
hi buddy,
i tried but no luck
Any news? I got one in the same condition. When its in eRecovery and i try to update it shows "can't get update info(or something like that)", it doesn't have factory reset button available, it doesn't have wipe button available. When I put it in fastboot, it shows Phone "Locked" and "FRP Lock".
Wtf do I do with this brick?
Thank you in advance! ( Be aware guys! I was scammed with it on the internet - full box, like new, and it doesn't even get into android)
Hi mate
Did you solve this in the end?
John Smith234 said:
Hi mate
Did you solve this in the end?
Click to expand...
Click to collapse
no mate ... the phone is not usable anymore as i couldn't get it fixed from anywhere nor found any solution online
ahmowais said:
i want to access my phone contents and get backup as I have important files to recover.
Click to expand...
Click to collapse
Hi,
have you tried Emergency Backup?
- Turn off your phone and connect it to your computer using USB cable. Press and hold the Volume Up and Power Button for 15 seconds, until the device restarts and enters the eRecovery mode. Select "Emergency backup" . Works on EMUI 9.1 only!
IMO theres no other way to save your data...
ahmowais said:
no mate ... the phone is not usable anymore as i couldn't get it fixed from anywhere nor found any solution online
Click to expand...
Click to collapse
That sucks, I think I got exactly the same problem, have tried all kind of combinations. Only different appearing window is fastboot but that is totally useless as the device doesnt appear on Hisuite either. What happens when the batter totally drains ?
---------- Post added at 04:29 PM ---------- Previous post was at 04:26 PM ----------
- Turn off your phone and connect it to your computer using USB cable. Press and hold the Volume Up and Power Button for 15 seconds, until the device restarts and enters the eRecovery mode. Select "Emergency backup" . Works on EMUI 9.1 only!
IMO theres no other way to save your data...[/QUOTE]
Phone does not turn off, and whatever button you press it just keeps showing Huawei start screen except for volume down and power button combination which opens fast boot window. Do you how to connect the device to laptop while in fastboot mode? We have tried fastboot commands on terminal but didnt get anywhere with file recovery...
so no solution?
U can do it, but u need dissasembly the phone, to make test point, if phone isn't hw damaged yes u can fix it in that way
hi may I ask if you have resolved the problem? Been experiencing the same problem when my huawei p20 lite got stuck on a startup logo screen
same problem with me, phone is stuck on start up logo, not moving anywhere despite using all the tricks, any solutions, anyone have?
Hi, I have same problem. Stuck on HUAWEI logo and power off do restart.
Phone is with last stock FW, FRP and BOOTL. locked. I tried update from SD card, but no succes. All buttons combinations not working except fastboot. But in fastboot, there is no possibility to do something due to locked btldr.
But I have one advantage, I have same phone model with same firmware working. Is there any possibility to recover bad piece?
*bump*
anyone who fixed this ?