Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
RaiderDuck said:
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
Click to expand...
Click to collapse
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
ergotelis said:
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
Click to expand...
Click to collapse
flasing a recovery is done via fastboot so you don't have to enter recovery but fastboot (hold power and volume down till it shows fastboot, then press up) .
look at this post: http://forum.xda-developers.com/showpost.php?p=33137046&postcount=10
Fix
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
hello i had this problem yesterday, it happens in neutrino rom to alot of people!
and btw i could not open recovery either
ill explain what i had to do
i had to use moto-fastboot and install a new recovery, basically your recovery is dead and your rom is unbootable
heres the steps
download the moto drivers and install
http://forum.xda-developers.com/attachment.php?attachmentid=1381183&d=1349549067
then download the motofastboot zip http://forum.xda-developers.com/attachment.php?attachmentid=1381414&d=1349555102
and create a new folder in C: (computer) called Android and then drag the files from the moto zip into android
Then download a new recovery http://www.mediafire.com/?6ww8wrjrdqq9m97
place the recovery.img into the android folder
now you have all the files needed to reflash your new recovery and fix your phone the whole idea is to reinstall recovery so you can access it and wipe and install the rom fresh again
now you need to do these steps
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
4) On your PC click the Start menu, then in the search box type "cmd"
5) In the command prompt type the following commands (no quotes, hit enter after each command)
6a) "cd c:/android"
6b) "moto-fastboot devices"
your CMD promt should show something like this
C:\Users\Me>cd c:/android
c:\Android>fastboot devices
TA20703SX9 fastboot
c:\Android>
now if that has all worked type the following phrases
moto-fastboot erase recovery
moto-fastboot flash recovery recovery-clockwork-6.0.1.4-maguro.img
moto-fastboot reboot
now the phone should reboot, unplug the usb and pull battery out.
put battery back in and then try to boot into recovery like you normally would (power button + Vol Down)
and your new recovery should load!
from here you can wipe your whole system which i would reccomended as your current one is corrupt and install a new rom or reflash your current on onto a clean wipe. if you dont understand how to clean wipe do all of these steps, factory reset, clear cache, clean dalvik cache then go to mounts > storage and format data + format cache + format system
now install new rom and let it boot up, should bootloop a couple of times then start! if not unplug battery from phone and ask for further assitance
Pixelguy said:
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
Click to expand...
Click to collapse
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
ergotelis said:
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
Click to expand...
Click to collapse
unplug usb
remove battery, then put battery back in make sure phone off (no green light)
then hold power button and vol down at the same time for a few seconds
Fastboot should appear in white writing then press up volume and it should say starting rsd protocal or something similiar
then plug in usb and follow the steps i have written above
i do exactly what you said, but doesn't show fastboot. from switched off, if i press volume up with power button, i see the message "starting rsd protocol support" .but no fastboot option!
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
jorno88 said:
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
Click to expand...
Click to collapse
When i start up phone, the only combination possible to stop restarting is by pressing power+vol up to show that with RSD. There is no other option then selectable. Power + volume down does not work, doesn't show anything, has anyone of you experienced this thing?
If the only working option you have is RSD, then I'm afraid you're stuck with having to flash a stock SBF. I hope you know/remember exactly what stock version you had installed before any modding or flashing, because the SBF has to match exactly. Choose wisely and read up as much as you can before flashing.
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
I will later also try to open it, to see if the side button "volume down" is not working,.
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
ergotelis said:
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
Click to expand...
Click to collapse
Yes, flashing a wrong SBF will most likely hardbrick your device.
ergotelis said:
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
Click to expand...
Click to collapse
Can't try right now, but as far as I know, yes, that is a standard way to enter RSD mode.
thank you, so, i know that at least my phone responds to some instructions.
Is there anyone else to suggest me to do anything else?
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
ergotelis said:
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
Click to expand...
Click to collapse
Sadly no. The RSD mode can only ever be used to flash SBFs. That's it. Nothing less, nothing more.
I will now try to open it to see if vol down is not working well. If it does work, i will select a stock rom 1 year old and i will flash it using rsd, and whatever happens....:good:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
try this
ergotelis said:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
Click to expand...
Click to collapse
Yesterday I had a hard time getting my phone into fastboot mode, after loading a bad SV kernel,it only wanted to start the RSD protocol mode. I eventually got into fastboot by plugging into the wall charger, then removing and installing the battery while holding the vol button. When fastboot appears, unplug the charger to allow sd access.
Thanks for the suggestion, i tried even this,it didn't work. The funny thing is that it shows the battery charging level full screen if i connect the charger, as it starts.
I noticed also that when i press vol down now, it takes longer to start and continue to the moving red logo, it stays for a while stable red,feels like it is thinking whether to start or not lol (if i don't press vol down, on the power up the red moto logo immediately starts the classic "waving" effects)
Anyone having any kind of suggestion?I guess you don't, right?
Hi experts,
I really don't know what happened to this phone. I left it on the charger (usb->pc) for couple hours and when I got back, only the LG Logo. I removed the battery and reboot the unit, it gets stuck at the LG Logo. So I google around for a fix. Found some.... but to no avail! Following is what I don't understand!
1. When I do factory reset, (volume down + power key), click YES and it says "Factory Reset Processing". This process takes forever. I went outside for like 30 minutes and when I got back, still at the same screen.
2. When I try to flash via bootloader (volume up + insert usb cable) it goes into fastboot mode then tells me to press the volume up button until I see the download mode. Well, this proces, like the above, I press the volume up key for like 20 to 30 minutes, nothing happens.
3. When I remove/insert battery, power up the unit, it gets stuck at the LG logo but the pc cannot recognize it.
What seems to be the problem here?
Thank you very much!
OMG, We have same problem ,I don't know what happen with that, Even I don't use couple months ,I try to do MP3 Player ,Can not be boot on.. I just want to try re-flash now if I can do this with my PC.
Jabbacks said:
Hi experts,
I really don't know what happened to this phone. I left it on the charger (usb->pc) for couple hours and when I got back, only the LG Logo. I removed the battery and reboot the unit, it gets stuck at the LG Logo. So I google around for a fix. Found some.... but to no avail! Following is what I don't understand!
1. When I do factory reset, (volume down + power key), click YES and it says "Factory Reset Processing". This process takes forever. I went outside for like 30 minutes and when I got back, still at the same screen.
2. When I try to flash via bootloader (volume up + insert usb cable) it goes into fastboot mode then tells me to press the volume up button until I see the download mode. Well, this proces, like the above, I press the volume up key for like 20 to 30 minutes, nothing happens.
3. When I remove/insert battery, power up the unit, it gets stuck at the LG logo but the pc cannot recognize it.
What seems to be the problem here?
Thank you very much!
Click to expand...
Click to collapse
Since you can get into fastboot mode, you don't have to press volume up, from here you can just fastboot flash your phone using stock ROM or use my tool (https://drive.google.com/drive/folders/0B6vSHGXxJIWmVjRVMlRSQW9HWWs) that I wrote to flash it (easier for beginners).
RAZERZDAHACKER said:
Since you can get into fastboot mode, you don't have to press volume up, from here you can just fastboot flash your phone using stock ROM or use my tool (https://drive.google.com/drive/folders/0B6vSHGXxJIWmVjRVMlRSQW9HWWs) that I wrote to flash it (easier for beginners).
Click to expand...
Click to collapse
I don't see any files in your unbrick folder
equitube said:
I don't see any files in your unbrick folder
Click to expand...
Click to collapse
Wow, okay, screw that. Just flash them normally
I have unlockbootloader my v300k after i flash it to us998 to root it get bootloop and i cant get to fastboot or download. What can i do ? pls help mee
giabao574 said:
I have unlockbootloader my v300k after i flash it to us998 to root it get bootloop and i cant get to fastboot or download. What can i do ? pls help mee
Click to expand...
Click to collapse
Go to the Korea thread and see what they say?
giabao574 said:
I have unlockbootloader my v300k after i flash it to us998 to root it get bootloop and i cant get to fastboot or download. What can i do ? pls help mee
Click to expand...
Click to collapse
you don't know how to get into bootloader or you can't get into bootloader?
I cant get into bootloader . Because when i plug cabble into my phone it started to charge . I try with fastboot and download mode but it cant . I think my phone lost bootloader
giabao574 said:
I cant get into bootloader . Because when i plug cabble into my phone it started to charge . I try with fastboot and download mode but it cant . I think my phone lost bootloader
Click to expand...
Click to collapse
it - from time to time - shows the charging logo,
then just force it to reset: power button + volume down - keep both pressed until it resets (screen off),
then keep the volume down button pressed
<-- with the usb cable plugged in all of the time
That should get you into bootloader.
Note:
the phones behaves really weird and it could be that it shuts off while in bootloader.
In that case simply disconnect the USB cable, connect it to the phone only and then - while the volume button down is pressed - connect it to PC
zacharias.maladroit said:
it - from time to time - shows the charging logo,
then just force it to reset: power button + volume down - keep both pressed until it resets (screen off),
then keep the volume down button pressed
<-- with the usb cable plugged in all of the time
That should get you into bootloader.
Note:
the phones behaves really weird and it could be that it shuts off while in bootloader.
In that case simply disconnect the USB cable, connect it to the phone only and then - while the volume button down is pressed - connect it to PC
Click to expand...
Click to collapse
I tried so hard but it can't it always go to show charge logo and my pc cant recognize my phone .
Lg v30 Boot loop stuck no pc detection
My LG v30 suddenly stuck in Boot loop there is no sign of dection in the PC. All combination of buttones tried but all in vain.
Any trick please
LG V30 bootloop
amarsaeed said:
My LG v30 suddenly stuck in Boot loop there is no sign of dection in the PC. All combination of buttones tried but all in vain.
Any trick please
Click to expand...
Click to collapse
Hi, I seem to have the same problem... the phone loops the startup screen and the USB connection is not working. I can get the initial download mode screen to appear for a minute, the looping starts again.
I think I have a brick...
hammeru said:
Hi, I seem to have the same problem... the phone loops the startup screen and the USB connection is not working. I can get the initial download mode screen to appear for a minute, the looping starts again.
I think I have a brick...
Click to expand...
Click to collapse
have you tried Master Reset?
ChazzMatt said:
have you tried Master Reset?
Click to expand...
Click to collapse
MAJOR EDIT: Master Reset worked, is accessed by holding vol down and power until screen goes dark, release power when the lg logo appears, count to 2, press power again until factory reset screen, say yes, should put you into twrp (provided you already have it installed of course)
Is there a button combination to do this? I'm fearing I also bricked my us998 by dirty flashing from aospx to the johnfawkes stock rom after I randomly stopped getting lte connection. Probably definitely should have factory reset but there were a few pictures I didn't want to lose and now I am really wishing I had bitten the bullet on them to save my phone. Current situation is a loop at the verizon startup screen, vol down and power can initiate a restart and from there I can hold vol up to get the initial download mode splash screen but then the screen goes dark and the device starts to loop again. Any suggestions would be greatly appreciated.
rollthedaisuke said:
MAJOR EDIT: Master Reset worked, is accessed by holding vol down and power until screen goes dark, release power when the lg logo appears, count to 2, press power again until factory reset screen, say yes, should put you into twrp (provided you already have it installed of course).
Click to expand...
Click to collapse
Glad you got it figured out.
Hi everyone,
Looking for some help on my phone which is the only one I have unfortunately
So basically the Honor 9 is showing only the logo then just a black screen. One time it vibrated afterwards when pressing the volume buttons and made the camera sound. So it seems it might have booted but nothing is showing?
Phone did fall before, but worked afterwards.
I cannot access Emui recovery (when pressing volume up+power, it just shows the logo and black screen), but I can access fastboot.
If I plug it to charge, it shows the charging logo fine.
Bootloader is not unlocked. Nothing custom has been installed.
I already tried Hisuite recovery mode, but it said the device is not supported.
Any advice on what I could try? I searched the forums but couldn't figure out what to do. Any suggestion would be much appreciated.
Thank you!
bleepop said:
Hi everyone,
Looking for some help on my phone which is the only one I have unfortunately
So basically the Honor 9 is showing only the logo then just a black screen. One time it vibrated afterwards when pressing the volume buttons and made the camera sound. So it seems it might have booted but nothing is showing?
Phone did fall before, but worked afterwards.
I cannot access Emui recovery (when pressing volume up+power, it just shows the logo and black screen), but I can access fastboot.
If I plug it to charge, it shows the charging logo fine.
Bootloader is not unlocked. Nothing custom has been installed.
I already tried Hisuite recovery mode, but it said the device is not supported.
Any advice on what I could try? I searched the forums but couldn't figure out what to do. Any suggestion would be much appreciated.
Thank you!
Click to expand...
Click to collapse
Hello.
I know it is close to a year now, but just in case there is someone else out there looking to solve something like this. Just make sure to have a wifi connection through which you can download your firmware and recovery through the eRecovery panel. The downloads should be around a total of 4GB, so bear that in mind.
When you are set with your wifi access do the following (feedback will be appreciated):
- plug your phone to your computer and hold down the vol up + power button to boot into eRecovery
- in the eRecovery panel, choose to download firmware and recovery and it will launch a wifi connection
- connect to your wifi
- download the firmware and recovery accordingly
- once completed, you can proceed to update/upgrade (basically to install) it via the eRecovery
- once the upgrade/update/installations are complete, you can reboot.
- just know that everything on your device will be lost - full system and sdcard wipe will be made.
I hope you find the above helpful for you.
Hi
yesterday my tab s6 screen got unresponsible without anything else happened..
Then i found out that if i used the pen - the n i could turn it off from drop down menu.
I did that but then when i tried to turn it on it got stuck on that bootloop!
I can not access recovery mode - only download mode.
When i put it on charge it starts booting without showing battery percent and boots over and over until battery is drained.
In download mode i tried to flash Bootloader and firmware - but no luck ( odin proceduce succeded but the tab is still in the same bootloop )..
Still can't reach recovery menu..
Any ideas?
Recovery Mode is tricky to get to on this tablet - The timings of the button presses are difficult to nail. Assuming you weren't trying to flash anything to your tablet prior to it boot looping, I don't see any reason why you couldn't access Recovery Mode.
Reboot Tab by pressing and holding both Power (Bixby) button and volume down. Once screen turns off immediately press Power and Volume Up, let go once you see Samsung logo.
bartleby999 said:
Recovery Mode is tricky to get to on this tablet - The timings of the button presses are difficult to nail. Assuming you weren't trying to flash anything to your tablet prior to it boot looping, I don't see any reason why you couldn't access Recovery Mode.
Reboot Tab by pressing and holding both Power (Bixby) button and volume down. Once screen turns off immediately press Power and Volume Up, let go once you see Samsung logo.
Click to expand...
Click to collapse
Tried again in 30min.. no luck :/
As soon as the screen gets dark the device restarts.. sometimes i manage to hold those buttons but still no reovery mode :/
egidsatr said:
Tried again in 30min.. no luck :/
As soon as the screen gets dark the device restarts.. sometimes i manage to hold those buttons but still no reovery mode :/
Click to expand...
Click to collapse
Have you done anything to your tablet prior to bootloop? Tried to flash anything, deleted anything?
Again, there's no reason you shouldn't be able to access Recovery this situation is exactly why it's there.
bartleby999 said:
Have you done anything to your tablet prior to bootloop? Tried to flash anything, deleted anything?
Again, there's no reason you shouldn't be able to access Recovery this situation is exactly why it's there.
Click to expand...
Click to collapse
I opened NBA 2K Mobile and then i went away for like 20mins..
Then i opened the tab and screen was not reacting - only with pen.
I think the USB debugging is not enabled - is there any ways how to enable it without rooting?
Just tried to install a firmware through download mode - Odin shows "passed" and my tab is still in the same sh** ..:/
Hi,
Really need your help, after I updated my firmware using Odin, updated BL, AP, CP, CSC, my tab cannot boot up stuck in logo. Doing the Power + volume up leads me to different screen now.
Cannot access recovery mode also.
What must I do? Pleasssee help. Added the pic, after doing hard reset (power + vol up)
I cannot connect back to Odin also. Always setup connection failed.
Please help. Messed up big time :'(
Thank you in advance.
JayR0503 said:
Hi,
Really need your help, after I updated my firmware using Odin, updated BL, AP, CP, CSC, my tab cannot boot up stuck in logo. Doing the Power + volume up leads me to different screen now.
Cannot access recovery mode also.
What must I do? Pleasssee help. Added the pic, after doing hard reset (power + vol up)
I cannot connect back to Odin also. Always setup connection failed.
Please help. Messed up big time :'(
Thank you in advance.
Click to expand...
Click to collapse
What country are you located in?
iBowToAndroid said:
What country are you located in?
Click to expand...
Click to collapse
UAE..
"setup connection failed" is a USB error. Try a different cable, or a different port on the computer, or a totally different computer