hi
I walk to work and back everyday and I listen to my DAB radio all the time.
Problem is (and I realise its not the biggest problem in the world) I can't hear my phone so always miss calls.
Can anyone think of a solution so I can get audio from my DAB into the Hermes so I can listen to the radio and when I get a call, it interupts the audio? I thought about using the mini usb but that only has a mic in and if I use that, if the phone rings all they'll hear is my radio
Its a big of an expensive solution but would this work?:
http://www.sony.co.uk/view/ShowProduct.action?product=TMR-BT10
So I bluetooth audio to my Hermes then use the wired headphones/mic to listen to it and if I get a call, the audio stops?!
Would that work?
thanks in advance
cel
You could just have your phone on ring AND vibrate and keep it in your pocket so you feel it.
Just an idea
Try these instead. http://www.plantronics.com/north_america/en_US/products/cat1150057/cat5420035/prod29780013
I have had a pair for about a year and the sound is great. You can connect the included dongle your DAB or any other non blue tooth audio device and set up a link between your phone and the dongle with the headset. While you are listening to your music from the DAB if you receive a call the headset silences the music and you can answer the call directly from the headset. When the call ends your music resumes automatically. I may be a little pricier than device you listed but works like a charm.
Note make sure you look at the 590a not the 590e. The 590e does not include the dongle.
Also don't purchase it directly from Plantronics site. You can get it for about $100 if you search the web for it.
I am sure this may be an issue for some people. my car stereo has bluetooth that links with my phone and mutes the car stereo and turns on speaker phone when a call comes in. i like the fact that it mutes the stereo since i usually have it very loud, but my problem is i cant set it to default to the phone earpiece and not the speakerphone, even when i answer a call and press the button to keep it on the ear piece, it switches right back to the stereo a second later, i press it again and it stays on the phone. i have had this issue with all my other phones as well and it drives me nuts. is there anyone who can come up with a fix for this?
i appreciate any input anyone may have on this.....
thanks
It is not a problem with the phone, it is to do with bluetooth profiles as they are designed to communicate with TWO devices not THREE. I also use car stereo for playing my music. I do not get that many calls while driving so I never use my bt headphones.
Moved to proper forum.
sorry about posting in the wrong forum. I am only trying to get it to default to the handset when i pick up a call. i do not use it to play music, so i have no need for that to even be an option, i just want to be able to pick up a call on my phone, and have it stay on my phone while it uses the bt link to mute and un mute the stereo. i find the speakerphones in car stereos to be totally worthless for talking, but i find the mute feature very useful.
Hi, just wondering anyone able to get phone call with bluetooth headset. I was able to connect bluetooth headset successfully but when making call, i can't hear the voice from other party. But playing music was ok. Someone pls help and confirm. Just wondering is my root and rom problem.
in addition, calling using viber can use bluetooth headset without problem.
Thanks alot
Once you have paired your device, long press it in Bluetooth settings then select options and select 'Tablet' for phone calls to be sent to it.
Tablet = Phone audio
Media = All other audio
So has anyone figured out how to use a bluetooth headset without root
Were you guys actually able to get it to pair and connect to the headset profile? not just the "media" profile?
I don't seem to have a tablet profile but I'm sure that's because I am not rooted (Evo View 4g)
My Galaxy S3 connects to my car's Bluetooth and allows me to make and receive calls. However, notification sounds are not playing via Bluetooth. It seems that the phone is sending the sounds to bluetooth but the car system doesn't play them. The result is that I have no audible indication when I receive a message when my phone is connected to my car's Bluetooth system.
Similarly, if I try to use S-Voice it would seem that the phone is expecting sound input via bluetooth and not from the phone's built in microphone, which means it does not detect any sound. Audio output also does not play on the phone or via bluetooth.
Presumably my car's bluetooth does not support receiving such sounds - only supporting basic phone functions. I cannot find any configuration settings on the car system to enable it.
Is there any way of stopping my phone trying to send notification sounds to bluetooth and to just play these via the phone's speaker but still allowing the phone to be connected to bluetooth for making and receiving calls? Similarly can I force S-Voice to use the phone's microphone and speaker if it cannot be made to work with my car's bluetooth?
S Voice on AT&T Galaxy Note Bluetooth In Car
First off, I am having the same issue, I tried even holding down talk / voice command button on steering wheel, No luck. I have a 2012 Kia Optima GLI full Nav and Voice command options. I have my Note working nicely with Team Perfection ICS R2, S Voice is fully functional except:
When using S voice in car connected to car Bluetooth (pushing search button on bottom of phone face) it tries to accept audio input from car Mic over Bluetooth, but never receives input. Can't find any setting in S voice app to change input setting from car to phone mic. Not sure why the car mic doesn't work other than just not supported by the s voice app? Anyone out there know of a fix or work around?
s voice does not work over any bluetooth
I have tried this on multiple Bluetooth devices. It does't hear anything and it responds with a very feint. Robotic distorted voice. Music plays well on Bluetooth but I have had problems with phone calls.so maybe the problem is the Bluetooth stack rather than s-voice.
I am having the same problem with SGS3. When I was testing s-voice on SGS2 you could set s-voice to use SGS speaker and mic for voice commands and notifications. Now I can't find that toggle.
BT Devices , yes....Car BT, No
It works fine on my headsets. IT doesn't work in my car.
spanout has nailed the problem. It apparently does NOT use the mic in the phone when hooked to BT. The car is not designed to pass voice to the BT. The car BTs typically have their own voice control, and as such is handling the voice itself.
When you think about it, it makes sense. Less chance for outside noise if it takes the input from the mic on your BT device, as likely the phone will not be close to your mouth.
The only way we'll get it to work is to find a way to enable the mic on the phone when on BT. Probably would need help from the DEVs here on that.
im in the same boat!
the real kicker is SIRI can send her voice over the car speakers and utilize the car mic.
so logic says, its purely a BT setting on the software ice cream and s3.
any apps for that? or any dev's want to chime in?
im using a very simple bmw bluetooth (not idrive).
it cant stream music, so i dont know how the fak siri can send her voice over it.
I have this problem with my SGS3, and had it with the SGS2 in my Ford S-Max. The problem is Ford's. Using the phone with a parrot car kit has all notifications fired over bluetooth.
georgedeaves said:
I have this problem with my SGS3, and had it with the SGS2 in my Ford S-Max. The problem is Ford's. Using the phone with a parrot car kit has all notifications fired over bluetooth.
Click to expand...
Click to collapse
same with a jabra freeway with latest v3 firmware and a galaxy s3 i9300xxblfb.
very dissapo9nted, finaly a fast, accurate voice app that understands my music requeats and i cant use it in the car!
Yakumo.unr said:
same with a jabra freeway with latest v3 firmware and a galaxy s3 i9300xxblfb.
very dissapo9nted, finaly a fast, accurate voice app that understands my music requeats and i cant use it in the car!
Click to expand...
Click to collapse
so switching the s-voice and nav to MONO works with bluetooth, but the a2dp or whatever protocol it uses normally doesnt work.
however calls are done using a2dp, so wtf?
can someone make a quick app that just forces ONLY s-voice and NAV in to mono?
the apps out there make everything go mono or nothing at all...sucks for voice call quality
I needed to revive this thread as a search for my problem led me to it.
1) Is anyone able to play a video on the S3 (GT-I9300 4.1.2) and stream the sound from the video to the car while connected via Bluetooth?
I am not.
2) S3 notification sounds do not play via the car's speakers when receiving a text message or email etc.
I can make and receive calls just fine and even play music from the S3 via BT by selecting the phone from the list of devices on the car's screen.
Blutooth / Voice App Issue - SOLVED
First of all this does work on my 2009 Highlander, but it's a bit Kuldgy.
BT Mono allows my voice app to work, but by itself it's not a solution. You have to activate it manually before using S-Voice, Google Voice or AVX. It opens the connection and has to be activated each time or it can be set to reconnect automatically…. Killing my radio.
Download the free version (I can’t access the play store to give you the link) and see if it works manually. If it works for your test then the rest should work as well.
Install Tasker:
Create a task to keep the screen from locking when your state is Bluetooth connected to the car device.
Create a Task (you don’t need it in a profile)
- Set bluetooth on (in case it’s off)
- Load BT mono (with auto on enabled in the BT mono app)
- Wait ~400MS
- Load App AVX (or S-Voice, or whatever)
- Wait 9 seconds
- Kill BT mono
- Kill BT mono root (it wasn’t always killing BT mono)
I’ve been thinking about trying to simply reboot the BT (BT off then wait then BT on) rather than kill an app.
You can add the task to your home screen as a widget…. Still not safe to do while driving.
That’s where GMD Gestures comes in. You set a swipe command, I use 2 fingers down, to launch the task.
Seems to work pretty well. I can keep my eyes on the road and still use voice commends. You do need to hang up the phone when you’re done talking, but I had to do that with Siri.
I still wish there was a force mono on all connections app, but I still haven’t seen one. AVX just added the ability to force mono for speech, it’s worked for other people, but I’m still trying to figure out why it doesn’t work for me (he's had reports that the Note 2 doesn't like his solution, Kudos to him for trying to add this).
Hope this helps
****UPDATE****
BT Mono may work for me because I'm rooted. According to the app on the store (pro version) Apparently Samsung, in an effort to prevent call recording, blocks the ability to re-route the microphone.
Hi guys, i've been searching the internet with no avail, so now i hope the collective wisdom of XDAdevs can help me out.
I frequently need to do presentation on various places, and i fond thatO holding a microphone gets old really quick. I also believe in using my devices to the limit and beyond. I currently own a Plantronics edge bluetooth headset and a G3 phone.
so what I need is a way to use my bluetooth headset as a wireless microphone. In essence, what i need is to use the voice input on my bluetooth, transmit it to the phone, process it (if i want to) and output the result on real time to the 3.5 microphone jack, which i will connect to whatever sound system the room provides. Some apps I tried does the first part well enough, but unfortunately it transmits the output back to the bluetooth headset, and has no option to redirect it to the microphone jack. Can anyone help please? Much obliged.
Ps: my work frequently requires me to make phone calls without touching my phone or my headset. Can anyone recommend a good way to make the bluetooth headset phone 'listen' for keywords and voice dial my contacts selected numbers without me (or others) ever touching the phone or headset? Many thanks!