(sorry i used an online translator, becaus of my poor english)
Firmware: download LINK http://223.4.236.214/bbs/showtopic-13607.aspx
there select the correct model (PD10LX81)
In the archive file, the ROM + Flash Tool
(Smart phone flash tool MediaTek Inc.) + USB driver included.
Requires:
- Windows PC / laptop (firewall / antvirus off)
- Freelander PD10LX81 (ACCU charged 100%)
- The firmware of the above LINK
- The tool for the Tablet root the Device by: John Does, "Dev-host - root 4.0.4 ICS.zip"
http://www.android-hilfe.de/sonstig...elander-pd10-lite-3g-gps-1gb-ram-4gb-rom.html
Thanks for the TOOL to John Doe
- If 7zip to extract the firmware files http://www.7-zip.org/
0 Turn off PC / laptop firewall / antivirus, install a driver (USB VCOM
Driver.rar, MT6577 USB VCOM drivers \ Installdriver.exe)
1 If flash the tablet with the new firmware if (20121219) (see: k, l)
Start Flash_Tool.exe, MT6575_Android_scatter_emmc.txt load (button: Scatter-loading)
Off tablet short wait (15 seconds), click download button, connect tablet with USB cable to PC / Laptop
2 rooten the Tablet + customize the ROM as desired
3 read system.img (android)
a) Switch off tablet wait briefly (15 sec)
b) On the PC / laptop, the smart phone flash tool start (Flash_Tool.exe)
c) File: MT6575_Android_scatter_emmc.txt store (button: Scatter-loading)
d) Riders: "Read back" open
e) add -> Filename: system.img set
f) Start Address: 0x00000000034E4000
Length: 0x126EC600
g) Button: Click "Read back"
h) PD10LX81 Connect with USB cable to PC / laptop and wait until the
"Selection process" is completed.
i) copy dir of the original ROM firmware and rename it to myrom for example, in there
replace the system.img against just been read.
j) on this ROM can now eg: be flashed another PD10LX81
k) Start Flash_Tool.exe, MT6575_Android_scatter_emmc.txt from eg: load \ myrom \
l Switch off) Tablet short wait (15 seconds), click download button, connect tablet with USB cable to PC / Laptop
Can also be helpful adb.exe, this is in the archive: "Dev-host - root 4.0.4 ICS.zip" included.
Docu https://developer.android.com/tools/help/adb.html . For Linux (32bit) to the adb found here (Thanks to PJF16).
APPs: (Google Play)
Terminal by Jack Palevich
Apps2ROM by Ludovic RENAULT
SU (updated) by Chainfire
Apk Extractor Kim Heeseok
Related
Hello everyone. Im from Vietnam and now I provide a new method to use Flash Tool (R&D Test Tool) to flash KDZ firmware with new version of LG Mobile Support Tool v1.7.2. This is only the first version and apply for LG Mobile Support Tool v1.7.2. The final version will get one click solutions, just 1 click and here you go !
For those who Vietnamese's viewer : http://lgviet.com/forum/threads/flash-tool-v1-0-5-4-mod-flash-rom-offline-cho-lg.22465/
For those who English's viewer, read bellow instructions.
1. Functions :
+ Fix force to login when run FlashTool v1.0.5.4 (UpTestEX.exe) first time !
+ Upgrade lastest lib of Flashtool !
+ B2CApp v1.7.2 Patch.exe patch 2 files LGMLauncher.exe and LGUserCSTool.exe to make it work with Flash Tool v1.0.5.4
2. Tutorial :
- Make sure you have lastest version of LG Mobile Support Tool v1.7.2
- Run B2CApp v1.7.2 Patch.exe . Press button ... > Select path :
+ Windows 7 : C:\ProgramData\LGMOBILEAX\LGMLauncher.exe
+ Windows XP : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\LGMLauncher.exe
- Click Next > Press OK
- Press button ... > Select path
+ Windows 7 : C:\ProgramData\LGMOBILEAX\B2C_Client\LGUserCSTool.exe
+ Windows XP : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\B2C_Client\LGUserCSTool.exe
- Click Finish > Press OK
- Open Flash Tool v1.0.5.4 and use as usual !
PS : No more to run http virtual server when run flash tool no more trouble !
3. Download Link :
http://www.mediafire.com/download/i9umjt3b6beu8bu/FlashTool.1.0.54_MOD.rar
Click to expand...
Click to collapse
Hello,
After a long time looking ways to root the You 25, I've found the right way to do it.
The You 25 is very similar to Micromax A51, as some users suggested. It is based on broadcom cpu.
Quick characteristics: gb 2,3,7, 256Mb ram, 256Mb rom, 2Gb Sdcard, dual sims, 3g ....
On Win7: Disable antivirus
1) Download unlockroot23
2) Execute unlockroot23
3) Two items:
- execute install driver
- You 25ower off; take off batteryand back ; connect You 25 usb cable to the pc; wait driverdetection (popup tells adb installed or something similar); poweron you25; set it in debug mode and unknown source checked (in settings applications menu) ...
4) Execute unlookroot.exe
2 panes popup opens:
- Click on ROOT (in green) item on the left pane,
- Click on the detected You25 item on the right pane;
Normally rooting is executed (the root button greys on);
Once finished, the You25 reboots (I d'ont remember exactly ...)
After reboot, check for SuperSu icon is there.
Check su with terminal, should ask su access to SuperSu.
Thanks to forii, which I haven't bookmarked. Just in case: Browse with search " Micromax a51 root".
.
Tecmobile you25: Fixing vulnerabilities (trying)
Hello,
After the rooting, I try to fixmaster key vulnerabilities.
With the forii help ,many thanks to them, I come up with a solution:
- Install bluebox from Google play;
- Install Xposed framework for Gingerbread 2.3 (Xposedinstaller-2.2-2013005.apk (1.25Mb)) from androidforums.com);
- Install Master key fix (support Gingerbread) me.piebridge.masterkeyfixgb_v2-0d0824.apk from Xposed module repository repo.xposed.info
Once setup Xposed and install the module, running bluebox shows all fixed.
Hello!
I have some problem to geht a Ubuntu 13.10 to run!
1 - I install the "complete linux installer" (2.8) ... from: http://linuxonandroid.org/
2 - I download Ubuntu 13.10 and copy the extracted files (ubuntu.img & ...img.md5) to the intern sdcard
3. - I download & install the 2 apps [VCN Viewer & Android Terminal Emulator(jackpal)]
4 - Then, i press "Start", the Terminal opens and nothing happens, the only thing standing on the Window:
"[email protected]:/ $ 9;60R"
... what is wrong?? & what means 9;60R ??
... also interesting: when i press "open folder" under "settings" in the complete linux-installer app, a terminal opens
with the same crap displayed: 9;60R ??
System: CyanogenMod 11 M10 (4.4.4.)
Kernel: 3.4.0cyanogenmod-g0128289
Processor: ARMv7
Phone: Xperia Z1 compact (amami)
... phone is rooted, app has root-acces & usb-debugging is enabled!
Please help me - what is wrong?
regards,
stefan
i have created python script for copy all third party apps installed in your device and copy all the apps in your pc.
NON-ROOT script.
script uses adb shell commands for copy and reinstall apps in your device so no need of root access.
for now i only manage to test it on X00TD(Android 9.0) for now. Update me for other device/android versions.
Steps for backup apps :-
1) Download python 3 from python.org and install it in your pc.
2) Download python script files from the link below.
3) Run "windows-backup.py" if you are on Windows OS, else "linux-backup.py" for linux based OS.
Steps for reinstall apps:-
*first 2 steps are same
3) Run "install-apps.py" for install apps OS dosent effect on this script.
YouTube :- www . youtube . com / watch?v=EEoPo7Hqt3k
File Download link :- bit.ly / 2Lhqe0T (remove spaces).
I'm getting error.
Zenfone max pro m1
Android: 8.1 (stock, No root, bootloader unlocked, TWRP recovery)
PC: Windows 8.1
USB debugging enabled, USB mounted as storage
ERROR msg in screenshot
foxonfox said:
I'm getting error.
Zenfone max pro m1
Android: 8.1 (stock, No root, bootloader unlocked, TWRP recovery)
PC: Windows 8.1
USB debugging enabled, USB mounted as storage
ERROR msg in screenshot
Click to expand...
Click to collapse
Install adb in your pc first
Can you tell me why I'm getting this error?
[email protected]:~/Documents/App backup-restore$ python3 linux-backup.py
Folder Created
Fetching Packages list from device
error: no devices/emulators found
Packages are fethced
Copying Started
Total 1 Apps
b'
1 : .apk
/bin/sh: 1: Syntax error: Unterminated quoted string
Traceback (most recent call last):
File "linux-backup.py", line 47, in <module>
os.rename("base.apk",name)
FileNotFoundError: [Errno 2] No such file or directory: 'base.apk' -> '.apk'
[email protected]:~/Documents/App backup-restore$
What's wrong or what am i doing wrong?
OS 9 MSM Extended with MicroG installed (No Google)
EDIT:
got it after enabling USB DeBugging
Board code: M8S_W_BT_2.0
CPU chipset: S905W
Wifi chipset: AP6236
INSTALLATIONS
1. Install Amlogic_USB_Burning_Tool v2.1.3 and open app.
2. Install Amlogic_Driver.
3. Short 2 pins K1 behind eMMC nand (this is "reset button").
4. Connect box to the PC via USB port (must be near power hole).
5. Check the driver connected properly in Device Manager.
6. Unzip firmware file. Back to app, import img file and click Start.
DOWNLOADS
Amlogic_USB_Burning_Tool_v2.1.3.zip
Amlogic_Driver.zip
Custom ROM (img file) - BT maybe not working, LIGHT and NOT HEAT as stock ROM
Credits
* 4pda.ru - for useful info
* freaktab - for img uploading
* algdu83 - for img modifier