[RESET] Mecool M8S Pro+ (blueboard version) - Android Stick & Console AMLogic based Computers

Board code: M8S_W_BT_2.0
CPU chipset: S905W
Wifi chipset: AP6236
INSTALLATIONS
1. Install Amlogic_USB_Burning_Tool v2.1.3 and open app.
2. Install Amlogic_Driver.
3. Short 2 pins K1 behind eMMC nand (this is "reset button").
4. Connect box to the PC via USB port (must be near power hole).
5. Check the driver connected properly in Device Manager.
6. Unzip firmware file. Back to app, import img file and click Start.
DOWNLOADS
Amlogic_USB_Burning_Tool_v2.1.3.zip
Amlogic_Driver.zip
Custom ROM (img file) - BT maybe not working, LIGHT and NOT HEAT as stock ROM
Credits
* 4pda.ru - for useful info
* freaktab - for img uploading
* algdu83 - for img modifier

Related

[Q] 1&1 SmartPad / Root & Custom ROM

Hi everyone, is there a way to root the 1&1 SmartPad and to use a custom ROM?
Kind regards
PaulyTally
The problem seems to be that you cant enable the usb debugging mode as it is not available in the menu.
Maybe some technical details help:
* Display: 7″ LED-Touch-Display (Resoultion 800 x 480)
* Processor: 500 MHz ARM11
* Memory: 256 MB DDR RAM
* Internal memory: 1 GB Flash
* Interfaces: WLAN IEEE 802.11b/g/n, USB 2.0, SD-Card-Slot, Infrared-Sender, Micro USB (Power Supply), 3,5mm Audiooutput, System-Connector(Docking-Station)
* Akku: 2.500 mAh Lithium-Ionen
* Size: 196,6 x 130 x 22 Millimeter
* Weight: ca. 470 Gramms
* Audio: MP3, AAC, WAV
* Video: H.264, MPEG4 (XVID), ASF, AVI, MP4, MOV, MKV
* Picture: JPG, GIF, PNG, BMP
Kind regards
PaulyTally
We try to hack the pad. A small Board called ump2002 in German.
Search for a way to read and write a Custom Rom. We have found some Information on the net and wait now for the smarpads to test some things.
sorry for my english
i have a smart pad with android not realy good
i hope for a way to make win mobile on it that was fine
the quest is " run win mobile on smart pad "
Root 1&1 Smartpad
Here is a way to root 1&1 Smartpad running on Android 2.2 (Froyo).
Many thanks to 'Kjeldor' @ tablet-user.de for the original German content.
The following apps are needed:
Superuser.apk
AnyCut.apk
z4root.apk
U may download the zip file from rapidshare (h**p://rapidshare.com/files/451128664/Root-Kit.zip) or attached below.
1. Copy the above mentioned APKs to the memory card
2. Go to Settings > Applications and enable 'Unknown Sources'
3. Install a file manager from the 1&1 Store (I installed Dual File Manager)
4. Now go to the SD card using the file manager and install 'Superuser.apk' and then 'AnyCut.apk'.
5. Start 'Anycut' and click 'New Shortcut'. Select 'Activity' then 'Development', and create a new short cut. This new short-cut named 'Development' (default name) will give you the access to 'Enable USB Debugging' option which is otherwise not visible from 'Settings > Applications'
6. Activate the 'USB-Debugging' from the new short-cut
7. Install and run 'Z4root.apk' application. Once it's up, click 'Permanent Root'. Make sure your Smartpad has enough battery and be patient (unless you want to brick your device !) till it reboots.
More info and pictures on Z4 root is here (w*w*w*.dkszone.net/root-galaxy-s-samsung-android-2-2-froyo-samsung-galaxy-tab-root)
8. Congrats, now you have root access !!!
Once again many thanks to 'Kjeldor' @ tablet-user.de forum for the original German content.
*Refreshing
Is there no custom rom for this smartpad ??
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Smartpad 810c custom roms/development/faq/ecc
http://www.androidiani.com/forum/mediacom-smartpad-810c/
Sorry, only Italian language forum

Freelander PD10LX81 (3G 8GB Flash / 1GB RAM) MT6575

(sorry i used an online translator, becaus of my poor english)
Firmware: download LINK http://223.4.236.214/bbs/showtopic-13607.aspx
there select the correct model (PD10LX81)
In the archive file, the ROM + Flash Tool
(Smart phone flash tool MediaTek Inc.) + USB driver included.
Requires:
- Windows PC / laptop (firewall / antvirus off)
- Freelander PD10LX81 (ACCU charged 100%)
- The firmware of the above LINK
- The tool for the Tablet root the Device by: John Does, "Dev-host - root 4.0.4 ICS.zip"
http://www.android-hilfe.de/sonstig...elander-pd10-lite-3g-gps-1gb-ram-4gb-rom.html
Thanks for the TOOL to John Doe
- If 7zip to extract the firmware files http://www.7-zip.org/
0 Turn off PC / laptop firewall / antivirus, install a driver (USB VCOM
Driver.rar, MT6577 USB VCOM drivers \ Installdriver.exe)
1 If flash the tablet with the new firmware if (20121219) (see: k, l)
Start Flash_Tool.exe, MT6575_Android_scatter_emmc.txt load (button: Scatter-loading)
Off tablet short wait (15 seconds), click download button, connect tablet with USB cable to PC / Laptop
2 rooten the Tablet + customize the ROM as desired
3 read system.img (android)
a) Switch off tablet wait briefly (15 sec)
b) On the PC / laptop, the smart phone flash tool start (Flash_Tool.exe)
c) File: MT6575_Android_scatter_emmc.txt store (button: Scatter-loading)
d) Riders: "Read back" open
e) add -> Filename: system.img set
f) Start Address: 0x00000000034E4000
Length: 0x126EC600
g) Button: Click "Read back"
h) PD10LX81 Connect with USB cable to PC / laptop and wait until the
"Selection process" is completed.
i) copy dir of the original ROM firmware and rename it to myrom for example, in there
replace the system.img against just been read.
j) on this ROM can now eg: be flashed another PD10LX81
k) Start Flash_Tool.exe, MT6575_Android_scatter_emmc.txt from eg: load \ myrom \
l Switch off) Tablet short wait (15 seconds), click download button, connect tablet with USB cable to PC / Laptop
Can also be helpful adb.exe, this is in the archive: "Dev-host - root 4.0.4 ICS.zip" included.
Docu https://developer.android.com/tools/help/adb.html . For Linux (32bit) to the adb found here (Thanks to PJF16).
APPs: (Google Play)
Terminal by Jack Palevich
Apps2ROM by Ludovic RENAULT
SU (updated) by Chainfire
Apk Extractor Kim Heeseok

Tecmobile You 25 root

Hello,
After a long time looking ways to root the You 25, I've found the right way to do it.
The You 25 is very similar to Micromax A51, as some users suggested. It is based on broadcom cpu.
Quick characteristics: gb 2,3,7, 256Mb ram, 256Mb rom, 2Gb Sdcard, dual sims, 3g ....
On Win7: Disable antivirus
1) Download unlockroot23
2) Execute unlockroot23
3) Two items:
- execute install driver
- You 25ower off; take off batteryand back ; connect You 25 usb cable to the pc; wait driverdetection (popup tells adb installed or something similar); poweron you25; set it in debug mode and unknown source checked (in settings applications menu) ...
4) Execute unlookroot.exe
2 panes popup opens:
- Click on ROOT (in green) item on the left pane,
- Click on the detected You25 item on the right pane;
Normally rooting is executed (the root button greys on);
Once finished, the You25 reboots (I d'ont remember exactly ...)
After reboot, check for SuperSu icon is there.
Check su with terminal, should ask su access to SuperSu.
Thanks to forii, which I haven't bookmarked. Just in case: Browse with search " Micromax a51 root".
.
Tecmobile you25: Fixing vulnerabilities (trying)
Hello,
After the rooting, I try to fixmaster key vulnerabilities.
With the forii help ,many thanks to them, I come up with a solution:
- Install bluebox from Google play;
- Install Xposed framework for Gingerbread 2.3 (Xposedinstaller-2.2-2013005.apk (1.25Mb)) from androidforums.com);
- Install Master key fix (support Gingerbread) me.piebridge.masterkeyfixgb_v2-0d0824.apk from Xposed module repository repo.xposed.info
Once setup Xposed and install the module, running bluebox shows all fixed.

Help![Root]Lava X81?

Does anyone knows how to root lava x81?
I searched google bout it didn't help?
Phone Specs:
Mediatek MT6735
OS: Star OS based on Android 6
Kernel:3.18.19
[HELP] Please anyone help to build/port TWRP for Lava X81 MT6735 Marshmallow Arm64
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Any body please help us. Lava X81 16GB 3GB MT6735 SoC is a June 2016 Model. Today is 27 May 2019. Till now we don't find any custom recovery for Lava X81.
Device Vendor : Lava
Model/Version : X81
SoC Vendor : MediaTek
Soc CPU : MT6735 1.30 Ghz
CPU Cores : Quad-Core (4)
CPU Architecture : 4x ARM Cortex-a53 @ 1.30 GHz
CPU Family: Cortex-A53
CPU Clock Speed : 299 MHz - 1300 MHz (i.e., 1.3 GHz)
Machine : aarch64
ABI : arm64-v8a
Bit Version : 64-bit (Arm)
GPU Vendor : ARM
GPU Renderer : Mali-T720
GPU Clock Speed : 279 MHz - 448 MHz
RAM : 3 GB (2934 MB) LPDDR3_16GB
ROM : 16 GB
Screen Density : 320 DPI (xhdpi)
Resolution : 1280x720
Kernal Version : Linux 3.18.19 (1470576607)
Kernal Architecture : armv8l
[HELP] to build/port [TWRP] [RECOVERY] for Lava X81 MT6735 Marshmallow Arm64 ?
Android Version : 6.0
Android Version Codename : Marshmallow
Please anyone built/port TWRP for us (We are around lacks of users would got benifitted).
:good::good::good::good::good::good::good::good::good::good::good:
You don't need TWRP for rooting. Install MediaTek MT65xx USB VCOM Preloader USB Drivers. Install SP Flash Tool. Find a scatter file for your device. If you can not find it, you can create it. Load the scatter file. Read back boot.img from phone. Install the Magisk Manager app. Patch the boot.img from Magisk. On the Download Tab, flash the patched_boot.img from SP Flash Tool (IMPORTANT: uncheck all checkboxes except BOOT) You are rooted as soon as you boot from this patched_boot.img and can check it from Magisk Manager app
aIecxs said:
You don't need TWRP for rooting. Install MediaTek MT65xx USB VCOM Preloader USB Drivers. Install SP Flash Tool. Find a scatter file for your device. If you can not find it, you can create it. Load the scatter file. Read back boot.img from phone. Install the Magisk Manager app. Patch the boot.img from Magisk. On the Download Tab, flash the patched_boot.img from SP Flash Tool (IMPORTANT: uncheck all checkboxes except BOOT) You are rooted as soon as you boot from this patched_boot.img and can check it from Magisk Manager app
Click to expand...
Click to collapse
How to patch boot image with Magisk ? Anyone know

			
				
https: // www. t h e c u s t o m d r o i d .com/install-magisk-root-android-devices
aIecxs said:
https: // www. t h e c u s t o m d r o i d .com/install-magisk-root-android-devices
Click to expand...
Click to collapse
We are discussing here to root lava x81.
WIthout rooting, how to install Magisk & then how to patch boot.
Currently it is impossible without introducing A CUSTOM TWRP RECOVERY for LAVA X81
please READ my first post! then LOOK at the screen shot (second post)
https: // www. t h e c u s t o m d r o i d .com/install-magisk-root-android-devices/#Method-2-Patch-Stock-Boot-Image
aIecxs said:
https: // www. t h e c u s t o m d r o i d .com/install-magisk-root-android-devices
Click to expand...
Click to collapse
Thanks it works!
[ROOTED] Lava X81 using Magisk Manager by patching stock boot image (No TWRP)
---------------------------------------------------------
Who said this method to us ?
aIecxs, XDA Senior Member from Germany
https://forum.xda-developers.com/member.php?u=7285913
Thread Link :
https://forum.xda-developers.com/android/help/helproot-lava-x81-t3620166
Thanks alecks!!!!
------------------------------------------------------------
Youtube Video Assistance:
Video Name: How to root Android using Magisk Manager & stock boot.img
Channel : Hovatek
------------------------------------------------------------
REQUIREMENTS :
(0) Unlocked Bootloader
To unlock bootloader in Lava X81 by Fastboot mode use the command
fastboot oem unlock #unlock bootloader via fastboot mode
{{{{{ NOTE: Unlocking bootloader in Lava X81 will erase all the user data. So please take a backup before unlocking bootloader. }}}}}
(1) Stock boot.img for your phone model (its best its for your Build Number / Variant ) . You can extract from the stock rom / firmware of your device (you may check our collection at https://forum.hovatek.com/forum-89.html ) OR backup from your device using a hardware box e.g Miracle Box, CM2, Nck Box Pro etc
(2) Download Latest Magisk Manager {Currently 7.3.0 (220)}
(3) Active internet connection on your Android device
(4) A windows 10 Laptop
---------------------------------------------------------
INSTRUCTIONS :
Step 1: Patching the stock boot.img
1. Install Magisk Manager 7.3.0 (220) APK on your android device.
2. Copy the stock boot.img of Lava X81 to your phone's internal storage or SD card whereever you want (Internal Storege\Dowloads is the better option)
3. Launch Magisk Manager app and check for latest updates. After the updates you will see that Magisk Manager is up to date.
4. Then, Select (Magisk is not installed. Latest 19.3 (19300)) Install > (Install Magisk) Install > Select and Patch a File >
5. Navigate to the location of the stock boot.img you copied earlier on (select Dowloads option or in my case, I used ES File Explorer File Manager), then Select it
6. Magisk Manager should begin downloading the magisk zip file for our arm64-v8a Device platform.
7. Once download is complete, MagiskManager will automatically patch the boot file and store it under
/storage/emulated/0/Download/magisk_patched.img
(Then I renamed it as "patched_boot.img" for our convenience)
Step 2: Flashing the patched boot.img
Among a variety of options to flash, I preferred Fastboot method
(0) Connect your Lava X81 one or two times to the PC (for preinstalling drivers)
(1) Boot your Lava X81 into fastboot mode.
(2) Open platform-tools_r28.0.1-windows.zip file
(3) Simultaneously press Keyboard's Shift key and Right click on the mouse, to open PowerShell window
(4) On the PowerShell use the following codes to flash:
Starting from phone's normal usb debugging mode,
adb devices #Ensures your phone connectivity in ADB (Android Debug Interface) mode via USB Debugging
adb reboot-bootloader #Reboot your phone to Fastboot Mode from ADB
fastboot devices #Ensures your phone connectivity in Fastboot mode
fastboot getvar unlocked #To check whether the bootloader is unlocked or not. It should be unlocked to proceed further
fastboot flash boot patched_boot.img #Flash the Magisk Patched Boot image file in Fastboot Mode
fastboot reboot #Reboot to the system from exiting Fastboot Mode
(5) Congrats and check with a Root checker app for root status. While checking for root status itself pop out for root permission.
--------------------------------------------------------
Proofs and All the necessary files as a zip file - MediaFire Link
Root Lava X81 using Magisk Manager by patching stock boot image (No TWRP)
http://www.mediafire.com/file/zjb78878i52865c/Root_Lava_X81_using_Magisk_Manager_by_patching_stock_boot_image_%2528No_TWRP%2529.zip/file
---------- Post added at 05:23 PM ---------- Previous post was at 05:19 PM ----------
aIecxs said:
please READ my first post! then LOOK at the screen shot (second post)
https: // www. t h e c u s t o m d r o i d .com/install-magisk-root-android-devices/#Method-2-Patch-Stock-Boot-Image
Click to expand...
Click to collapse
[ROOTED] Lava X81 using Magisk Manager by patching stock boot image (No TWRP)
---------------------------------------------------------
Who said this method to us ?
aIecxs, XDA Senior Member from Germany
https://forum.xda-developers.com/member.php?u=7285913
Thread Link :
https://forum.xda-developers.com/android/help/helproot-lava-x81-t3620166
Thanks alecks!!!!
------------------------------------------------------------
Youtube Video Assistance:
Video Name: How to root Android using Magisk Manager & stock boot.img
Channel : Hovatek
------------------------------------------------------------
REQUIREMENTS :
(0) Unlocked Bootloader
To unlock bootloader in Lava X81 by Fastboot mode use the command
fastboot oem unlock #unlock bootloader via fastboot mode
{{{{{ NOTE: Unlocking bootloader in Lava X81 will erase all the user data. So please take a backup before unlocking bootloader. }}}}}
(1) Stock boot.img for your phone model (its best its for your Build Number / Variant ) . You can extract from the stock rom / firmware of your device (you may check our collection at https://forum.hovatek.com/forum-89.html ) OR backup from your device using a hardware box e.g Miracle Box, CM2, Nck Box Pro etc
(2) Download Latest Magisk Manager {Currently 7.3.0 (220)}
(3) Active internet connection on your Android device
(4) A windows 10 Laptop
---------------------------------------------------------
INSTRUCTIONS :
Step 1: Patching the stock boot.img
1. Install Magisk Manager 7.3.0 (220) APK on your android device.
2. Copy the stock boot.img of Lava X81 to your phone's internal storage or SD card whereever you want (Internal Storege\Dowloads is the better option)
3. Launch Magisk Manager app and check for latest updates. After the updates you will see that Magisk Manager is up to date.
4. Then, Select (Magisk is not installed. Latest 19.3 (19300)) Install > (Install Magisk) Install > Select and Patch a File >
5. Navigate to the location of the stock boot.img you copied earlier on (select Dowloads option or in my case, I used ES File Explorer File Manager), then Select it
6. Magisk Manager should begin downloading the magisk zip file for our arm64-v8a Device platform.
7. Once download is complete, MagiskManager will automatically patch the boot file and store it under
/storage/emulated/0/Download/magisk_patched.img
(Then I renamed it as "patched_boot.img" for our convenience)
Step 2: Flashing the patched boot.img
Among a variety of options to flash, I preferred Fastboot method
(0) Connect your Lava X81 one or two times to the PC (for preinstalling drivers)
(1) Boot your Lava X81 into fastboot mode.
(2) Open platform-tools_r28.0.1-windows.zip file
(3) Simultaneously press Keyboard's Shift key and Right click on the mouse, to open PowerShell window
(4) On the PowerShell use the following codes to flash:
Starting from phone's normal usb debugging mode,
adb devices #Ensures your phone connectivity in ADB (Android Debug Interface) mode via USB Debugging
adb reboot-bootloader #Reboot your phone to Fastboot Mode from ADB
fastboot devices #Ensures your phone connectivity in Fastboot mode
fastboot getvar unlocked #To check whether the bootloader is unlocked or not. It should be unlocked to proceed further
fastboot flash boot patched_boot.img #Flash the Magisk Patched Boot image file in Fastboot Mode
fastboot reboot #Reboot to the system from exiting Fastboot Mode
(5) Congrats and check with a Root checker app for root status. While checking for root status itself pop out for root permission.
--------------------------------------------------------
Proofs and All the necessary files as a zip file - MediaFire Link
Root Lava X81 using Magisk Manager by patching stock boot image (No TWRP)
http://www.mediafire.com/file/zjb78878i52865c/Root_Lava_X81_using_Magisk_Manager_by_patching_stock_boot_image_%2528No_TWRP%2529.zip/file
i have nothing todo with Magisk - all credits go to the author @topjohnwu
(and you don't need to unlock bootloader, just flash with SP Flash Tool)

[SHARED] Redmi 9 ENG rom (engineering rom)

after further testing and finally restoring my IMEIs using this rom, i can say that it is indeed working, so hope it helps a lot of you guys stuck with a phone without IMEIs.
link :
Xiaomi Redmi 9 ENG Firmware (Engineering Rom)
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Requirements:
- SP flash tool and right DA file (provided in the post).
-brom bypass (also provided).
-patience and perseverance.
Steps to install:
1)steps to install brom bypass:
-first install python 3 (check on google)
- then run this code in a cmd
Code:
pip install pyusb pyserial json5
-after that make sure to have all the mediatek drivers installed and install libusb from the archive i provided
- after installing libusb you will be greeted by a filter wizard window, check the "install new device filter" then connect the phone to the pc while pressing (volume +, volume - and power button) all at the same time you
will see in the list a new mtk com port appear click on it and then on install, done with the prep'.
2)steps to flash:
-first launch the brom bypass, a window will appear saying 'waiting for bootrom' connect your phone while pressing (volume +, volume - and power button) all together then you will see on the command prompt 'protection disabled' it means you have successfully bypassed the brom.
- now oppen up sp flash tool, select the download agent, select the scatter fille from the rom folder and the auth file (provided with sp flash tool archive on the post) then setup sp flash tool in uart mode with a bud rate of 921600 then flash in format all.
-done.
Hope this helped, cheers !
Thanks Bro <3
Sammar Prince said:
Thanks Bro <3
Click to expand...
Click to collapse
No problem
razers211 said:
after further testing and finally restoring my IMEIs using this rom, i can say that it is indeed working, so hope it helps a lot of you guys stuck with a phone without IMEIs.
link :
Xiaomi Redmi 9 ENG Firmware (Engineering Rom)
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Requirements:
- SP flash tool and right DA file (provided in the post).
-brom bypass (also provided).
-patience and perseverance.
Steps to install:
1)steps to install brom bypass:
-first install python 3 (check on google)
- then run this code in a cmd
Code:
pip install pyusb pyserial json5
-after that make sure to have all the mediatek drivers installed and install libusb from the archive i provided
- after installing libusb you will be greeted by a filter wizard window, check the "install new device filter" then connect the phone to the pc while pressing (volume +, volume - and power button) all at the same time you
will see in the list a new mtk com port appear click on it and then on install, done with the prep'.
2)steps to flash:
-first launch the brom bypass, a window will appear saying 'waiting for bootrom' connect your phone while pressing (volume +, volume - and power button) all together then you will see on the command prompt 'protection disabled' it means you have successfully bypassed the brom.
- now oppen up sp flash tool, select the download agent, select the scatter fille from the rom folder and the auth file (provided with sp flash tool archive on the post) then setup sp flash tool in uart mode with a bud rate of 921600 then flash in format all.
-done.
Hope this helped, cheers !
Click to expand...
Click to collapse
Help sir, how to fix this error? Thanks
razers211 said:
after further testing and finally restoring my IMEIs using this rom, i can say that it is indeed working, so hope it helps a lot of you guys stuck with a phone without IMEIs.
link :
Xiaomi Redmi 9 ENG Firmware (Engineering Rom)
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Requirements:
- SP flash tool and right DA file (provided in the post).
-brom bypass (also provided).
-patience and perseverance.
Steps to install:
1)steps to install brom bypass:
-first install python 3 (check on google)
- then run this code in a cmd
Code:
pip install pyusb pyserial json5
-after that make sure to have all the mediatek drivers installed and install libusb from the archive i provided
- after installing libusb you will be greeted by a filter wizard window, check the "install new device filter" then connect the phone to the pc while pressing (volume +, volume - and power button) all at the same time you
will see in the list a new mtk com port appear click on it and then on install, done with the prep'.
2)steps to flash:
-first launch the brom bypass, a window will appear saying 'waiting for bootrom' connect your phone while pressing (volume +, volume - and power button) all together then you will see on the command prompt 'protection disabled' it means you have successfully bypassed the brom.
- now oppen up sp flash tool, select the download agent, select the scatter fille from the rom folder and the auth file (provided with sp flash tool archive on the post) then setup sp flash tool in uart mode with a bud rate of 921600 then flash in format all.
-done.
Hope this helped, cheers !
Click to expand...
Click to collapse
Help sir, how to fix this error? Thanks
razers211 said:
after further testing and finally restoring my IMEIs using this rom, i can say that it is indeed working, so hope it helps a lot of you guys stuck with a phone without IMEIs.
link :
Xiaomi Redmi 9 ENG Firmware (Engineering Rom)
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Requirements:
- SP flash tool and right DA file (provided in the post).
-brom bypass (also provided).
-patience and perseverance.
Steps to install:
1)steps to install brom bypass:
-first install python 3 (check on google)
- then run this code in a cmd
Code:
pip install pyusb pyserial json5
-after that make sure to have all the mediatek drivers installed and install libusb from the archive i provided
- after installing libusb you will be greeted by a filter wizard window, check the "install new device filter" then connect the phone to the pc while pressing (volume +, volume - and power button) all at the same time you
will see in the list a new mtk com port appear click on it and then on install, done with the prep'.
2)steps to flash:
-first launch the brom bypass, a window will appear saying 'waiting for bootrom' connect your phone while pressing (volume +, volume - and power button) all together then you will see on the command prompt 'protection disabled' it means you have successfully bypassed the brom.
- now oppen up sp flash tool, select the download agent, select the scatter fille from the rom folder and the auth file (provided with sp flash tool archive on the post) then setup sp flash tool in uart mode with a bud rate of 921600 then flash in format all.
-done.
Hope this helped, cheers !
Click to expand...
Click to collapse
Hi thank you i was succesfuly installed this rom and now what to restore IMEI? AT commands not working it says +CME ERROR: 100
thank you in advice i was tryed a lot of forms and i cant make calls, only 4G and SMS, restricted calls
yoalcuadrao said:
thank you in advice i was tryed a lot of forms and i cant make calls, only 4G and SMS, restricted calls
Click to expand...
Click to collapse
don't restore the imei 1 of the phone and put your sim in slot 2, might work now
willkurt27 said:
Help sir, how to fix this error? Thanks
Click to expand...
Click to collapse
did you properly install the mtk drivers ???
Well i hope i would be finally able to unbrick my phone with this... No recovery and fastoboot and by far everything works my device is recognized as mtk device but cannot flash any stock rom with SM Flash Tool
razers211 said:
after further testing and finally restoring my IMEIs using this rom, i can say that it is indeed working, so hope it helps a lot of you guys stuck with a phone without IMEIs.
link :
Xiaomi Redmi 9 ENG Firmware (Engineering Rom)
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Requirements:
- SP flash tool and right DA file (provided in the post).
-brom bypass (also provided).
-patience and perseverance.
Steps to install:
1)steps to install brom bypass:
-first install python 3 (check on google)
- then run this code in a cmd
Code:
pip install pyusb pyserial json5
-after that make sure to have all the mediatek drivers installed and install libusb from the archive i provided
- after installing libusb you will be greeted by a filter wizard window, check the "install new device filter" then connect the phone to the pc while pressing (volume +, volume - and power button) all at the same time you
will see in the list a new mtk com port appear click on it and then on install, done with the prep'.
2)steps to flash:
-first launch the brom bypass, a window will appear saying 'waiting for bootrom' connect your phone while pressing (volume +, volume - and power button) all together then you will see on the command prompt 'protection disabled' it means you have successfully bypassed the brom.
- now oppen up sp flash tool, select the download agent, select the scatter fille from the rom folder and the auth file (provided with sp flash tool archive on the post) then setup sp flash tool in uart mode with a bud rate of 921600 then flash in format all.
-done.
Hope this helped, cheers !
Click to expand...
Click to collapse
thank very much bro
muito obrigado, tive que usar o META modem para escrever IMEI. so deu certo com essa room, deus te abençoe. BRASIL
----------
MOD EDIT: English Translation Below
thank you very much, had to use META modem to write IMEI. it just worked out with this room, god bless you. BRAZIL
tiagoql said:
muito obrigado, tive que usar o META modem para escrever IMEI. so deu certo com essa room, deus te abençoe. BRASIL
Click to expand...
Click to collapse
in english or indonesia please
hello if I flash this rom to my miui 12.5.1 will this work? or my phone will be stucked in bootloop? sorry im newbie
work.
only write imei simcard 2 brother
razers211 said:
after further testing and finally restoring my IMEIs using this rom, i can say that it is indeed working, so hope it helps a lot of you guys stuck with a phone without IMEIs.
link :
Xiaomi Redmi 9 ENG Firmware (Engineering Rom)
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Click to expand...
Click to collapse
Hello and thanks for sharing, I have the same error as @willkurt27
while using SPFlash Tool
What I do:
Launch bypass.bat
Plug my phone with vol - pressed and battery unplugged.
[2021-08-24 21:33:09.958798] Waiting for device
[2021-08-24 21:39:08.793257] Found device = 0e8d:0003
[2021-08-24 21:39:14.833772] Device hw code: 0x707
[2021-08-24 21:39:14.833772] Device hw sub code: 0x8a00
[2021-08-24 21:39:14.833772] Device hw version: 0xca00
[2021-08-24 21:39:14.833772] Device sw version: 0x0
[2021-08-24 21:39:14.833772] Device secure boot: True
[2021-08-24 21:39:14.833772] Device serial link authorization: True
[2021-08-24 21:39:14.833772] Device download agent authorization: True
[2021-08-24 21:39:14.833772] Disabling watchdog timer
[2021-08-24 21:39:14.849712] Disabling protection
[2021-08-24 21:39:14.849712] Using kamakiri
[2021-08-24 21:39:14.849712] Protection disabled
Appuyez sur une touche pour continuer...
Then I use SPFlash Tool v5.1924.0
Tried with DA_6765_6785_6768_6873_6885_6853.bin and MTK_AllInOne_DA.bin
What am I doing wrong?
hckbkl said:
work.
only write imei simcard 2 brother
Click to expand...
Click to collapse
which da will i use? DA_6765_6785_6768_6873_6885_6853 or MTK_AllInOne_DA for redmi 9 mt6768
lobothefoots said:
Hello and thanks for sharing, I have the same error as @willkurt27
while using SPFlash Tool
What I do:
Launch bypass.bat
Plug my phone with vol - pressed and battery unplugged.
[2021-08-24 21:33:09.958798] Waiting for device
[2021-08-24 21:39:08.793257] Found device = 0e8d:0003
[2021-08-24 21:39:14.833772] Device hw code: 0x707
[2021-08-24 21:39:14.833772] Device hw sub code: 0x8a00
[2021-08-24 21:39:14.833772] Device hw version: 0xca00
[2021-08-24 21:39:14.833772] Device sw version: 0x0
[2021-08-24 21:39:14.833772] Device secure boot: True
[2021-08-24 21:39:14.833772] Device serial link authorization: True
[2021-08-24 21:39:14.833772] Device download agent authorization: True
[2021-08-24 21:39:14.833772] Disabling watchdog timer
[2021-08-24 21:39:14.849712] Disabling protection
[2021-08-24 21:39:14.849712] Using kamakiri
[2021-08-24 21:39:14.849712] Protection disabled
Appuyez sur une touche pour continuer...
Then I use SPFlash Tool v5.1924.0
Tried with DA_6765_6785_6768_6873_6885_6853.bin and MTK_AllInOne_DA.bin
View attachment 5392951
What am I doing wrong?
Click to expand...
Click to collapse
try to insert the auth file
lobothefoots said:
Hello and thanks for sharing, I have the same error as @willkurt27
while using SPFlash Tool
What I do:
Launch bypass.bat
Plug my phone with vol - pressed and battery unplugged.
[2021-08-24 21:33:09.958798] Waiting for device
[2021-08-24 21:39:08.793257] Found device = 0e8d:0003
[2021-08-24 21:39:14.833772] Device hw code: 0x707
[2021-08-24 21:39:14.833772] Device hw sub code: 0x8a00
[2021-08-24 21:39:14.833772] Device hw version: 0xca00
[2021-08-24 21:39:14.833772] Device sw version: 0x0
[2021-08-24 21:39:14.833772] Device secure boot: True
[2021-08-24 21:39:14.833772] Device serial link authorization: True
[2021-08-24 21:39:14.833772] Device download agent authorization: True
[2021-08-24 21:39:14.833772] Disabling watchdog timer
[2021-08-24 21:39:14.849712] Disabling protection
[2021-08-24 21:39:14.849712] Using kamakiri
[2021-08-24 21:39:14.849712] Protection disabled
Appuyez sur une touche pour continuer...
Then I use SPFlash Tool v5.1924.0
Tried with DA_6765_6785_6768_6873_6885_6853.bin and MTK_AllInOne_DA.bin
View attachment 5392951
What am I doing wrong?
Click to expand...
Click to collapse
or install mtk drivers properly
lobothefoots said:
Hello and thanks for sharing, I have the same error as @willkurt27
while using SPFlash Tool
What I do:
Launch bypass.bat
Plug my phone with vol - pressed and battery unplugged.
[2021-08-24 21:33:09.958798] Waiting for device
[2021-08-24 21:39:08.793257] Found device = 0e8d:0003
[2021-08-24 21:39:14.833772] Device hw code: 0x707
[2021-08-24 21:39:14.833772] Device hw sub code: 0x8a00
[2021-08-24 21:39:14.833772] Device hw version: 0xca00
[2021-08-24 21:39:14.833772] Device sw version: 0x0
[2021-08-24 21:39:14.833772] Device secure boot: True
[2021-08-24 21:39:14.833772] Device serial link authorization: True
[2021-08-24 21:39:14.833772] Device download agent authorization: True
[2021-08-24 21:39:14.833772] Disabling watchdog timer
[2021-08-24 21:39:14.849712] Disabling protection
[2021-08-24 21:39:14.849712] Using kamakiri
[2021-08-24 21:39:14.849712] Protection disabled
Appuyez sur une touche pour continuer...
Then I use SPFlash Tool v5.1924.0
Tried with DA_6765_6785_6768_6873_6885_6853.bin and MTK_AllInOne_DA.bin
View attachment 5392951
What am I doing wrong?
Click to expand...
Click to collapse
use mtkbypass

Categories

Resources