i see this massage on new update
WARNINGS
- This firmware will increase your binary counter but the current binary and system status will remain official.
- We have re-packaged this firmware from dump files.
- There is no modem in this firmware, so the Modem you will be using before flashing this firmware will remain the same.
- This is a pre-release firmware and not official from Samsung.
- We have fully tested this firmware and this firmware works perfectly as any other official firmware.
i can't be understand
it's talk for the network mobile not work on my contry
or
i can't back for old Firmware 4.1.2
or what will happen on my phone
please help
thank you
sorry for my bad english
Alright, basically this is what gonna happen if you do everything right.
This is just standard procedure as DEVer always say something like "flash at your own risk, I am not responsible for anything... blah blah blah"
1. You will lost your warranty if you don't know how to make it back to stock like, which isn't very hard but through not as easy as you thought.
2. Everything is OK if you flash it right. And if your phone isn't locked then your network is OK.
3. Yes, you can always downgrade to 4.1.2 if you want.
After all, just be sure you know what you are doing when you flashing
Sent from my GT-I9300 using xda premium
Related
Hi guys
Think it's my first post here so please be gentle :silly:
I dont know what firmware to upgrade to (or if i have the latest firmware etc.), i cant dial *#1234# code as it will return a: Connection Problem or Invalid MMI Code. *#06# is working fine though. So i do not know what my CSC, PDA and phone is?
Only thing i can find in "about phone" is:
Device: Samsung Galaxy S III GT-I9300
Android: Android Version 4.1.1
Rom: Latest version of CM10
Baseband Version: I9300XXXLE8
Operator: Denmark - Telia
dksparky said:
Hi guys
Think it's my first post here so please be gentle :silly:
I dont know what firmware to upgrade to (or if i have the latest firmware etc.), i cant dial *#1234# code as it will return a: Connection Problem or Invalid MMI Code. *#06# is working fine though. So i do not know what my CSC, PDA and phone is?
Only thing i can find in "about phone" is:
Device: Samsung Galaxy S III GT-I9300
Android: Android Version 4.1.1
Rom: Latest version of CM10
Baseband Version: I9300XXXLE8
Operator: Denmark - Telia
Click to expand...
Click to collapse
Look on www.sammobile.com/firmware for samsung firmware.Telia is not listed, also not on check fus. So i think you need this rom http://www.hotfile.com/dl/163050326/a3cfdf1/I9300XXBLFB_I9300NEEBLF1_NEE.zip.html for the Nordic countries. Install Triangle Away (here http://forum.xda-developers.com/showthread.php?t=1494114) first before flashing the rom with Odin to reset the flash counter. After you flashed the rom do a data/factory reset. Check first if the above rom i mentionedis the right one.
Was reading abit more (do not want to be stucked with a broken phone doing my vacation), found this is the I9300XXBLG6 the newest firmware and does it work for us on Telia in Denmark?
dksparky said:
Was reading abit more (do not want to be stucked with a broken phone doing my vacation), found this is the I9300XXBLG6 the newest firmware and does it work for us on Telia on Denmark?
Click to expand...
Click to collapse
Better check on Telia`s website for the latest firmware. You might flash the rom in your post, however you may have to change the modem for better reception.
gee2012 said:
Better check on Telia`s website for the latest firmware. You might flash the rom in your post, however you may have to change the modem for better reception.
Click to expand...
Click to collapse
If i flash the new firmware again, do i need to root the phone again or does it "keep" the root i made earlier... Sorry for all the stupid questions i'm an old iphone fart. :silly:
I tried to search for a sammy wiki or something to become a little more clever about rooting, rom and firmware.
As i see it:
The firmware is kinda the phone bios, doesnt matter if you running a hacked version of the system or not.
The ROM is the "system" it might be stock or cyanogen etc.
You have to have a hacked firmware to be able root your phone.... Or am i totally wrong here?
dksparky said:
If i flash the new firmware again, do i need to root the phone again or does it "keep" the root i made earlier... Sorry for all the stupid questions i'm an old iphone fart. :silly:
I tried to search for a sammy wiki or something to become a little more clever about rooting, rom and firmware.
As i see it:
The firmware is kinda the phone bios, doesnt matter if you running a hacked version of the system or not.
The ROM is the "system" it might be stock or cyanogen etc.
You have to have a hacked firmware to be able root your phone.... Or am i totally wrong here?
Click to expand...
Click to collapse
If you buy Mobile Odin Pro and flash the firmware with that app you will keep root and you don`t loose no data. If you flash with Odin on your pc you will loose root and your user data will probably be deleted.
The firmware i just linked is it not possible to root using that and odin nonpro? Do i have to use an older firmware then?
dksparky said:
The firmware i just linked is it not possible to root using that and odin nonpro? Do i have to use an older firmware then?
Click to expand...
Click to collapse
Flash it with Odin and root with CF Root 6.4. You can flash that firmware although i wouldn`t do it, it is a British Telecom provider rom. I would flash the rom in the 2nd post (nordic countries) wich i recommended. For instructions see m signature.
what rom to use for telia denmark unrooting?
I cant find my right rom for telia denmark...
What should i do?
I need to unroot my phone.
existinguser said:
I cant find my right rom for telia denmark...
What should i do?
I need to unroot my phone.
Click to expand...
Click to collapse
How about telenor then? they cooperate on same net so it shoudent matter
http://www.sammobile.com/firmware/?page=3&model=GT-I9300&pcode=HTD&os=1&type=1#firmware
The one closent to your orginal firmware should do
That is awesome. I will try and see what they say once I come in with unrooted phone. If they notice any thing, then i will have to change the glass my self, and if not, then it is awesome
Sent from my HTC Desire using Xparent ICS Tapatalk 2
Hey I have a rooted i9300 on 4.1.1 stock rom and I want to update it to 4.1.2 without losing data .
Whats the best way to do this ?
1.Unroot with supersu and update using ota ,than rooting with odin again?
2.vodoo ota keeper and update using ota (ALthough I'm not sure whether it is compatible with sgs3 or not)
3.Some other method
The main point is that I just want to update without having to arrange all my homescreen and icons and stuff and I want to keep all my whatsapp messages and pictures. So just like a regular firmware update provided by samsung.
Regards,
Flash with Odin full firmware over your current. Apps and settings remain as they are.
You're rooted so the only thing you need is to get mobile odin and flash whatever you want. I went from ics to latest jb, official roms. No data was lost at all.
I did need to reinstall a few apps like handcent that started force closing. Nothing special.
Btw Samsung updates do erase everything sometimes, that's why they're done through kies and that's why they suggest backups to kies first. If you're feeling really unsure just do a backup from a custom recovery first, so you can go back if anything doesn't go as you expect.
Sent from my GT-I9300 using XDA Premium App
O ok thank you ,Should I just follow http://forum.xda-developers.com/showthread.php?t=1646610 <this thread .Is there anything I should worry about in compatibility and Phone and csc settings ? Or do I pretty much just load firmware onto PDA and flash?
Also I'm with tmobile UK
GT-i9300
4.1.1
I9300XXDLID
which firmare should I flash I9300XXELL4 or I9300XXELLA ?
Sorry about all these questions ,just wanted to make sure everything was correct and I dont brick my phone.
Regards.
Hello everyone,
For unrooting purposes If I flash a stock firmware 4.0.3 via Odin then will the flash counter increase by one? I have reset it to zero using triangle away app already and my device is rooted and on stock with that super brick bug. Also that I can flash any of the stock firmware like LPQ as long as it is developed for I9100 right? Or there any sort of regional restriction?
Thanks in advance!
Sent from my GT-I9100
ask moderator to move your Question to Q&A section bro, here is development section
You can always reset your binary counter with triangle away or USB jig.
If you are on stock firmware, you are good, because it is samusng's original.
4.0.3 keeps the brick bug away.
Firmwares are separeted by branded & unbranded, they all work on any I9100 devices. Modems, on the other hand, my not work in your country / region. You'll have to flash another one in order to get your network to work.
I am trying to find the answer to the OP.
My S2 has just been replaced after a long struggle with the supplier & Samsung so I have decided not to ever do any custom ROM flashing again.
The above replies didn't really answer the simple question: Does flashing an official ROM like the new 4.1.2 JB with Odin increase the custom rom counter on the phone.
I know this can be reset but it was trying to do that before that bricked my phone and why it had to go back for service. I don't want to do that again but if I know the custom ROM counter will not go up I'm happy to flash official JB with Odin.
My phone is CYV (Cyprus) so likely to be one of the last places to get JB via OTA or Kies.
Thanks
newtonthecat said:
I am trying to find the answer to the OP.
My S2 has just been replaced after a long struggle with the supplier & Samsung so I have decided not to ever do any custom ROM flashing again.
The above replies didn't really answer the simple question: Does flashing an official ROM like the new 4.1.2 JB with Odin increase the custom rom counter on the phone.
I know this can be reset but it was trying to do that before that bricked my phone and why it had to go back for service. I don't want to do that again but if I know the custom ROM counter will not go up I'm happy to flash official JB with Odin.
My phone is CYV (Cyprus) so likely to be one of the last places to get JB via OTA or Kies.
Thanks
Click to expand...
Click to collapse
Custom couter stay at zero, but bootloader will by unlocked and "smart" guys in samsung service will know about flash.
@grisoxxl: I did not quite get you. You mean to say that the bootloader once unlocked remains unlocked even If you flash a stock firmware?
And one more thing. When do I need to backup that efs folder? Know about HC ktool?
gastonw said:
You can always reset your binary counter with triangle away or USB jig.
If you are on stock firmware, you are good, because it is samusng's original.
4.0.3 keeps the brick bug away.
Firmwares are separeted by branded & unbranded, they all work on any I9100 devices. Modems, on the other hand, my not work in your country / region. You'll have to flash another one in order to get your network to work.
Click to expand...
Click to collapse
Thanks
Sent from my GT-I9100 using xda app-developers app
Hello, i m trying to keep my phone in "official" state to recive ota upgrade, untill i was using 4.1.2+cf-autoroot everythhink worked ok
i resetted status with triangleaway and allowed tracker to run to stay in "official" status, and i recived ota upgrade to 4.3 (italian nobrand)
After upgrading to 4.3 i lost root so i re-rooted with cf-autroot but this time i can't stay in "official" status and i dont know whi because everythink
is the same... i used triangle away to reset again flashcounter... but i got "personalized" status and not "official"
so maybe problem can be the stock recovery that cf-aturoot flashed after rooting... maybe samsung upgraded it from 4.1.2
can some one provide the stock "ready to flash" recovery of the 4.3 firmware ugmk6 ? So i can make a test to understand if problem is that or maybe samsung make new kind of check to discover phone status...
Thanks & sorry for my english.
You do not post questions in development .
Works with the 4.3 recovery.img and triangle away play edition download stock firmware an unzip this flash recovery.img with mobilodin and use triangle away play edition
Sent from my GT-I9300 using XDA Premium 4 mobile app
Ok guys here's the deal, last year I rooted my friend's s3 (international, india, i9300) because there was no available update to android, so I flashed purelook HD 8.0 (android version 4.1.2), now he is saying that his phone has become very slow so he wants to go back to stock
so I downloaded "INU-I9300XWUGML4-20140107141249.zip" but after downloading this I saw that it is for android 4.3 (new official update).
So my question is should I directly flash this in ODIN (android 4.3) or I should download older official update before flashing new update?
If it's a full, multi part stock rom then it wouldn't be a zip. Odin can't flash zips.
Suggest you read the basics in general forum, sticky threads, before you do anything else.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If it's a full, multi part stock rom then it wouldn't be a zip. Odin can't flash zips.
Suggest you read the basics in general forum, sticky threads, before you do anything else.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
yeah I know odin doesn't flash zip's, I quoted the file name just for reference as there were two firmwares updates available for india, one INS another INU on doing some searches I came to know that they are locked and unlocked updates, kinda same, you can download any one.
is there any number I should match before downloading...we do not have contract phones in india, just retail so I was confused therefore I downloaded the unlocked one
back to the point, I know that I have to extract it first, there is a file inside it, named "I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1_HOME.tar.md5"
so maybe now you can help me out, whether should I flash it or download an earlier version and flash it prior to flashing this one...
So my question is should I directly flash this in ODIN (android 4.3) or I should download older official update before flashing new update?
Its your choice but as said read and understand the basics first .
JJEgan said:
So my question is should I directly flash this in ODIN (android 4.3) or I should download older official update before flashing new update?
Its your choice but as said read and understand the basics first .
Click to expand...
Click to collapse
Well I know how to flash roms/firmwares via ODIN, I know I have to check my counter too if it is not zero than I will have to reset it
so is there anything else?
I'm just asking this because I don't know much about s3 but I had note and I remember it had some issues regarding upgrading to a ice-cream sandwich version, something related to 'safe kernel' many other things...
and even I tried searching for basics, I didn't find anything else other than this and if there is something I am still missing then please kindly link me to it or just answer the question, IS IT SAFE or not?
basics
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
GravityDead said:
Well I know how to flash roms/firmwares via ODIN, I know I have to check my counter too if it is not zero than I will have to reset it
so is there anything else?
I'm just asking this because I don't know much about s3 but I had note and I remember it had some issues regarding upgrading to a ice-cream sandwich version, something related to 'safe kernel' many other things...
and even I tried searching for basics, I didn't find anything else other than this and if there is something I am still missing then please kindly link me to it or just answer the question, IS IT SAFE or not?
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1710613
http://forum.xda-developers.com/showthread.php?t=2323847
dudes dudes dudes I repeat once more, I know how to flash and what to flash,eg
first of all - reset the counter, app triangle away
then - install stock recovery, already downloaded
finally - flash stock rom, already downloaded
I know about the modem, efs back up and everything, all I am asking is, is it safe to directly upgrade from a third party 4.1.2 rom to stock 4.3 rom, I hope you understand my question this time... :angel:
We have always understood the question jude .
You fail to understand the answer nothing is 100% safe its your choice .
JJEgan said:
We have always understood the question jude .
You fail to understand the answer nothing is 100% safe its your choice .
Click to expand...
Click to collapse
oh finally hehe
thanks man, I'll go forward with it then as soon as my friends gets a day off, may be this sunday
GravityDead said:
oh finally hehe
thanks man, I'll go forward with it then as soon as my friends gets a day off, may be this sunday
Click to expand...
Click to collapse
I just flashed 4.3 Indian firmware on my rooted 4.1.2 phone with "mobile odin pro v4" and enabled everroot.
Sent from my GT-I9300 using Tapatalk