I am having issues with CM 10.1 RC3 connecting to WiFi and LTE/CDMA. WiFi will not connect AT ALL. CDMA doesn't connect AT ALL. LTE, will very very occasionally show up in the notification bar but will not light up blue signifying that it's connected. It will then go away in less than a minute. Right now all I see is a "R" with no bars.
I read up on second post of the CM 10.1 http://forum.xda-developers.com/showthread.php?t=2121331 and followed the instructions to the "T" about 3 times now to flash back to stock ROM and then back to CM. However, every time I restore a backup of CM or completely re-flash CM from the stock ROM I loose all radio connectivity.
I'd love to use CM 10.1 on my Inc4G, but right now, it's just eye candy with no functionality.
Any help would be appreciated.
Thanks!
I was having the same problems. This is what I did. Flashed rc1 reboot and flash gapps reboot again and flash rc4 wipe dalvik and wipe cache. Reboot and set up the phone. First time will will show roaming after it detects the sim it will ask you to reboot. You can just hit back button.
Sent from my iPhone 5 using Tapatalk 4 beta
antwonw said:
I am having issues with CM 10.1 RC3 connecting to WiFi and LTE/CDMA. WiFi will not connect AT ALL. CDMA doesn't connect AT ALL. LTE, will very very occasionally show up in the notification bar but will not light up blue signifying that it's connected. It will then go away in less than a minute. Right now all I see is a "R" with no bars.
I read up on second post of the CM 10.1 http://forum.xda-developers.com/showthread.php?t=2121331 and followed the instructions to the "T" about 3 times now to flash back to stock ROM and then back to CM. However, every time I restore a backup of CM or completely re-flash CM from the stock ROM I loose all radio connectivity.
I'd love to use CM 10.1 on my Inc4G, but right now, it's just eye candy with no functionality.
Any help would be appreciated.
Thanks!
Click to expand...
Click to collapse
Have you tried dialing *#*#4636#*#* and going into phone information and changing the preferred network type to "LTE/GSM/CDMA (PRL)"? (quotes won't be there)
Yes? No?
Sent from my ADR6410LVW using xda app-developers app
Related
Hey guys,
was running Fresh 5.3.1 and went to CM 10 stable.
I did the following prior to this:
1. updated radio for s-on devices via TWRP to get to latest version
2. factory reset
3. wiped system
4. wiped cache + dalvik
5. flashed cm10
6. booted, download Titanium backup
7. Titanium complain about seeing an android device ID mistmatch and said it would fix it so I said yes
8. Observing that I cannot connect to LTE network (it won't connect and won't fail back to 3g). I can only connect to 3g when LTE isn't available. EDGE works fine.
9. Also noticing that the device doesn't switch APs well at all like my old stock ROM or FreshROM did. (It will hang on to a WIFI AP that has a weaker signal).
Anyone else having these issues? Should I not change the device ID with Titanium? Is that the cause?
TIA.
amenic said:
Hey guys,
was running Fresh 5.3.1 and went to CM 10 stable.
I did the following prior to this:
1. updated radio for s-on devices via TWRP to get to latest version
2. factory reset
3. wiped system
4. wiped cache + dalvik
5. flashed cm10
6. booted, download Titanium backup
7. Titanium complain about seeing an android device ID mistmatch and said it would fix it so I said yes
8. Observing that I cannot connect to LTE network (it won't connect and won't fail back to 3g). I can only connect to 3g when LTE isn't available. EDGE works fine.
9. Also noticing that the device doesn't switch APs well at all like my old stock ROM or FreshROM did. (It will hang on to a WIFI AP that has a weaker signal).
Anyone else having these issues? Should I not change the device ID with Titanium? Is that the cause?
TIA.
Click to expand...
Click to collapse
UPDATE 1: Also installed / flashed gapps for JB in there
UPDATE 2: I'm also running radio (baseband) 1.12.11.0809 (latest I believe). Never had any issues like this with any other ROM I've tried (stock, Fresh, OMJ, pokerom) ...
UPDATE 3: Going to try again without restored Android ID
UPDATE 4: I wiped and reflashed and did NOT restore previous Android ID via Titanium Backup and now 4G LTE works fine but I'm still having the WiFI AP issues - seems like this ROM doesn't have logic on the client side wifi stack to look for a stronger AP with the same BSSID and switch to it - I thought it was a native function of the spec but I guess not.
Now GPS doesn't work this release isn't what i would call stable
EDIT: Went into a sense based ROM and did the ##GPSCLRX# code from the dialer app, then using msl reader put in the password and after this got a GPS lock in maps then went back to cm10 and GPS is working fine again...
A few days after working all these kinks out it seems to be much better... definitely a rough start!
EDIT 2: Stock camera app is having problems... Requires rebooting the phone but third party camera apps seem to work fine.. Also intermittently having an issue where the phone seems happy to have no data connection even though it's clearly available (won't get 4G, 3G or edge)...
Sent from my EVO using xda app-developers app
if you want an answer you need to be posting your questions in the CM10 thread in the development area.
Last week I was using NOS M7 v3.0.6 and everything was working great but me being a flasaholic, I wanted to try out a 4.3 Rom so I flashed SlimBean DLX 4.3 and it would not connect to 4G. I used it for about 2 days and tried changing the preferred network and rebooting but still didn't work. I then did a full wipe and flashed ParanoidAndroid v3.99 and still no 4G. I then tried crDroid AOSP after a full wipe and still same results. I then decided to go back to NOS to see if it would correct it but it didn't so I even went to Tranquil's 4.1.2 Rom which is what I am on now but still have no 4G. Anyone have any suggestions for me?
I am considering taking it back to 100% stock and see if it works.
Also...my wife's rooted Galaxy SIII connects to 4G in the same area with no problems.
RUU
ryknow27 said:
Last week I was using NOS M7 v3.0.6 and everything was working great but me being a flasaholic, I wanted to try out a 4.3 Rom so I flashed SlimBean DLX 4.3 and it would not connect to 4G. I used it for about 2 days and tried changing the preferred network and rebooting but still didn't work. I then did a full wipe and flashed ParanoidAndroid v3.99 and still no 4G. I then tried crDroid AOSP after a full wipe and still same results. I then decided to go back to NOS to see if it would correct it but it didn't so I even went to Tranquil's 4.1.2 Rom which is what I am on now but still have no 4G. Anyone have any suggestions for me?
I am considering taking it back to 100% stock and see if it works.
Also...my wife's rooted Galaxy SIII connects to 4G in the same area with no problems.
Click to expand...
Click to collapse
Its a known issue on some 4.3 roms, you must do a RUU but do not forget after Ruu a Phone Reset is obligated , so all your
factory original settings will be back.
http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
I had this issue before, check out my thread. http://forum.xda-developers.com/showthread.php?t=2338810
No issues since.
I'm running the NOS GPE 1.0.3 rom, and ever since, I too have only been able to connect to 3G...until like 20 minutes before this post. This worked for me.
Go to phone, dial *#*#4636#*#* and go to Phone settings, scroll down and set the preferred type to LTE/CDMA. Go to settings, "More" under network settings, go to mobile networks, turn off data and change the CDMA subscription to NV, then restart your phone. After I did that, after unlocking my phone, it tried to activate but it was stuck roaming, from there I pulled down the notifications and went to settings from there and went back to Mobile Networks and changed the network type to CDMA/LTE/EvDo and restarted my phone again, now LTE works perfectly Only thing is, it seems to always be on 3 bars of LTE, no matter what, but I'm not complaining, its much faster than 3G.
Ok, thanks for all the help. After flashing the RUU and upgrading to 2.06 it still wouldn't connect to 4g. I then went to a Verizon store and swapped out the sim card and it still didn't work but after about an hour it all of the sudden it connected to 4g. So, I guess it was the sim card and it just took a while to connect. Thanks again.
I am having trouble connecting to my router at home...Idk why this is happening, it was working fine on the stock 4.1.2 rom but ever since I updated to cm11 nightly (tuesday march 10, 2014), I cannot connect to my wifi.....Any help?!?!
why are people overlooking my thread?!?! I really need to fix this
AlainFarqy said:
I am having trouble connecting to my router at home...Idk why this is happening, it was working fine on the stock 4.1.2 rom but ever since I updated to cm11 nightly (tuesday march 10, 2014), I cannot connect to my wifi.....Any help?!?!
Click to expand...
Click to collapse
This is a ROM problem (I have this problem too) so don't worry about your device. I'd recommend switching to ParanoidAndroid (where WiFi works) and connecting to your network, then flashing back to CM11. If you care about data then make a Nandroid backup and after reinstalling CM do advanced restore and just restore data.
Step-by-step:
1. Download PA 4.4.2 (in the Original Android Development forums for this device)
2. Reboot into recovery
3. Full backup
4. Wipe, and install PA as per the instructions on the original post in the PA thread
5. Boot into PA, set up, connect to WiFi
6. Boot into recovery
7. Install CM11 but don't wipe. This is a little risky but mostly you shouldn't have a problem, since you haven't done anything on PA . 99% of the time you can restore to a backup if anything goes wrong.
8. (Optional) In the recovery choose advanced restore and restore data ONLY. this will restore your original apps and shouldn't cause any problems since the apps are originally from the same CM11 environment.
Hope I helped.
I having wifi problem with cm11 and PA too. I've flashed many radio file but it didnt work. i can connect to wifi after flashed radio but it stop download after a while, althought it still connect to wifi
xike456 said:
I having wifi problem with cm11 and PA too. I've flashed many radio file but it didnt work. i can connect to wifi after flashed radio but it stop download after a while, althought it still connect to wifi
Click to expand...
Click to collapse
If this is your problem, and flashing a radio works for a while, then try more radios. There are a few lists of hybrid radios in the general area for the e970. Though, I doubt this is a radio problem as when the stock ROM is flashed WiFi works with pretty much any radio, so I find it somewhat weird that using a new radio fixes the issue for you.
Sent from my LG-E970
I need more details. What do you mean by cannot connect? What happens? Please post a logcat of trying to connect.
Sent from my LG-LS970 using xda app-developers app
Shelnutt2 said:
I need more details. What do you mean by cannot connect? What happens? Please post a logcat of trying to connect.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Same is happening with me(CM11 M4)
when i turn on the wifi it scans n shows all the available networks.
when i select mine to connect, as usual it asks password.
after entering password; all that happens is it shows "saved" in wifi list.
nothing else happens.
i have tried connecting all types of wifi networks.
Also on the same line, i cant start the Wifi hotspot as well
after clicking on Portable hotspot it keeps on showing "Turning hotspot on..." for infinity.
I was also having wifi issues. For me, it was because my phone still had the ICS radios. Once I flashed the JB radios everything started working great. maybe that is your issue?
I have had nothing but pain and suffering since deciding to install CM 10.2 last night. I installed the latest stable version of CM 10.2.2 as well as the google apps pack and after several wipes (system, cache, data), it finally worked. The issue that I am not having is that it wont connect to the Verizon network.
I think the issue may be that in Mobile Network Settings>CDMA Subscription it is set to NV, and won't let me switch to RUIM/SIM. Another clue is that in the About Phone section, Baseband version is UNKNOWN. Any ideas?
EDIT: Ok, I updated to the latest CM version via the CM update process on the phone. looks like i am now on CM11 and i have network connectivity, though it is 1 bar of 3G. And now the google play store keeps throwing errors so i have to uninstall it.
I thought CM was a polished ROM that I could just install and go. I am now considering going with something else since I still cant get it working right.
killerroomba said:
I have had nothing but pain and suffering since deciding to install CM 10.2 last night. I installed the latest stable version of CM 10.2.2 as well as the google apps pack and after several wipes (system, cache, data), it finally worked. The issue that I am not having is that it wont connect to the Verizon network.
I think the issue may be that in Mobile Network Settings>CDMA Subscription it is set to NV, and won't let me switch to RUIM/SIM. Another clue is that in the About Phone section, Baseband version is UNKNOWN. Any ideas?
EDIT: Ok, I updated to the latest CM version via the CM update process on the phone. looks like i am now on CM11 and i have network connectivity, though it is 1 bar of 3G. And now the google play store keeps throwing errors so i have to uninstall it.
I thought CM was a polished ROM that I could just install and go. I am now considering going with something else since I still cant get it working right.
Click to expand...
Click to collapse
You definitely want to be using CM 11! 10.2 is ancient at this point.
As for your problems. First, Sense based ROMs apparently show more bars for the same signal strength. To know if it is actually worse, you need to compare the numeric (db) signal strength. Second, did you also flash a kk gapps package?
I would recommend downloading the latest gapps-kk-* from http://goo.im/gapps and then in recovery do:
* factory reset
* format /system
* install cm 11 version of your choice (latest nightly or M8)
* install gapps
And see if that makes your life a little better.
Thanks for taking the time to respond. The reason i went with 10.2 is it was the latest "stable" version on CM's website. I wasn't sure what "snapshot" meant so i didnt do any of those. Then i eventually did download and flash the kk gapps but was still having issues.
I am following your steps above to start fresh again, though I was still having issue with the radio before though, so we will see if this helps.
killerroomba said:
Thanks for taking the time to respond. The reason i went with 10.2 is it was the latest "stable" version on CM's website. I wasn't sure what "snapshot" meant so i didnt do any of those. Then i eventually did download and flash the kk gapps but was still having issues.
I am following your steps above to start fresh again, though I was still having issue with the radio before though, so we will see if this helps.
Click to expand...
Click to collapse
Well, everything seemed to install ok and phone booted fine but I have no mobile network. I do have data if i monkey around with the Preferred Network Type setting, but regardless, when i try to make a phone call, it says there is no mobile network. does anyone have the recommended settings for verizon?
Hello,
I am currently running a VZN SCH-I545 MDK on a AT&T network that has worked perfectly for all pre-LP versions and ROMs. Although when I try to update to a LP ROM, my mobile data doesn't work. I get an exclamation mark next to the signal bars even though data is on. I do get phone signal and wifi works. Am I missing something when updating to a LP ROM? Is this an issue when porting from VZN to AT&T when LP hasn't been released?
1. I tried several LP ROMs, but the only one that has worked so far is Dirty Unicorns 9.2.
2. I always do clean flashes
Any help would be appreciated greatly!
recklessbrilliance said:
Hello,
I am currently running a VZN SCH-I545 MDK on a AT&T network that has worked perfectly for all pre-LP versions and ROMs. Although when I try to update to a LP ROM, my mobile data doesn't work. I get an exclamation mark next to the signal bars even though data is on. I do get phone signal and wifi works. Am I missing something when updating to a LP ROM? Is this an issue when porting from VZN to AT&T when LP hasn't been released?
1. I tried several LP ROMs, but the only one that has worked so far is Dirty Unicorns 9.2.
2. I always do clean flashes
Any help would be appreciated greatly!
Click to expand...
Click to collapse
So I found the fix... for me using a Verizon phone on an AT&T network, then the mobile data settings are incorrect when installing LP ROMs. Somehow I got it to work when I messed with the following -
1. Preferred network type to LTE (preferred)
2. APN set to wap.cingular or pta (?)
3. Dialed *#*#4363#*#*