[Q] cm11 wifi problem - AT&T LG Optimus G

I am having trouble connecting to my router at home...Idk why this is happening, it was working fine on the stock 4.1.2 rom but ever since I updated to cm11 nightly (tuesday march 10, 2014), I cannot connect to my wifi.....Any help?!?!

why are people overlooking my thread?!?! I really need to fix this

AlainFarqy said:
I am having trouble connecting to my router at home...Idk why this is happening, it was working fine on the stock 4.1.2 rom but ever since I updated to cm11 nightly (tuesday march 10, 2014), I cannot connect to my wifi.....Any help?!?!
Click to expand...
Click to collapse
This is a ROM problem (I have this problem too) so don't worry about your device. I'd recommend switching to ParanoidAndroid (where WiFi works) and connecting to your network, then flashing back to CM11. If you care about data then make a Nandroid backup and after reinstalling CM do advanced restore and just restore data.
Step-by-step:
1. Download PA 4.4.2 (in the Original Android Development forums for this device)
2. Reboot into recovery
3. Full backup
4. Wipe, and install PA as per the instructions on the original post in the PA thread
5. Boot into PA, set up, connect to WiFi
6. Boot into recovery
7. Install CM11 but don't wipe. This is a little risky but mostly you shouldn't have a problem, since you haven't done anything on PA . 99% of the time you can restore to a backup if anything goes wrong.
8. (Optional) In the recovery choose advanced restore and restore data ONLY. this will restore your original apps and shouldn't cause any problems since the apps are originally from the same CM11 environment.
Hope I helped.

I having wifi problem with cm11 and PA too. I've flashed many radio file but it didnt work. i can connect to wifi after flashed radio but it stop download after a while, althought it still connect to wifi

xike456 said:
I having wifi problem with cm11 and PA too. I've flashed many radio file but it didnt work. i can connect to wifi after flashed radio but it stop download after a while, althought it still connect to wifi
Click to expand...
Click to collapse
If this is your problem, and flashing a radio works for a while, then try more radios. There are a few lists of hybrid radios in the general area for the e970. Though, I doubt this is a radio problem as when the stock ROM is flashed WiFi works with pretty much any radio, so I find it somewhat weird that using a new radio fixes the issue for you.
Sent from my LG-E970

I need more details. What do you mean by cannot connect? What happens? Please post a logcat of trying to connect.
Sent from my LG-LS970 using xda app-developers app

Shelnutt2 said:
I need more details. What do you mean by cannot connect? What happens? Please post a logcat of trying to connect.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Same is happening with me(CM11 M4)
when i turn on the wifi it scans n shows all the available networks.
when i select mine to connect, as usual it asks password.
after entering password; all that happens is it shows "saved" in wifi list.
nothing else happens.
i have tried connecting all types of wifi networks.
Also on the same line, i cant start the Wifi hotspot as well
after clicking on Portable hotspot it keeps on showing "Turning hotspot on..." for infinity.

I was also having wifi issues. For me, it was because my phone still had the ICS radios. Once I flashed the JB radios everything started working great. maybe that is your issue?

Related

[ST51i] Wifi won't connect

I've been having this issue for a few days now and I haven't been able to solve it myself. I've been using a GB rom for the past few months (this one and it's always been working fine. Still, I wanted to try ICS so I got myself to install CM9 on the device, and while I was at it, updated the baseband to 72. However, since then, I've been unable to connect to Wifi. I can see Wifi networks, but as soon as I try to connect it gets stuck on "Connecting". I tried flashing other ICS roms and restoring the baseband, nothing works. Yesterday I put the rom back that I've been using succesfully over the past months but still no difference.
When I scan for networks, they appear fine. Reception is good, but as soon as it tries to connect the icon changes to the icon for poor reception. It doesn't matter what network I pick. Other devices running Android have no problem connecting.
Does anyone have an idea what might cause this issue? Is there any way to get a logging of the Wifi to see what exactly goes wrong? Any troubleshooting steps I could take? Your help would be very much appreciated
edit: forgot to mention, with CM9 I used the CM9 kernel, with other roms I use Rage kernel
in exactly the same situation as above, except it was all working just fine until a couple of hours ago. now suddenly the router that's sitting right in front of me, giving full signals has turned into a "poor connection"!!!
i'm on CM9 with CM9 kernel and the recommended baseband
especially suspicious is the facebook application that just got updated when it was working fine a couple of hours or so back. hasn't worked since that update
Backup and try this https://www.dropbox.com/s/s587q1udg2ya2s1/Xperia Mini,LWW,Active_wifi_modules.zip flash in cmw and perform factory reset after that..
If it doesn't work then flash this stock ics ftf http://www.4shared.com/rar/du68FPM-/SK17i_41B0431__1249-7380ftf.html?refurl=d1url via flashtool...
Sent from my WT19i using xda app-developers app
rachit.rc96 said:
Backup and try this https://www.dropbox.com/s/s587q1udg2ya2s1/Xperia Mini,LWW,Active_wifi_modules.zip flash in cmw and perform factory reset after that..
If it doesn't work then flash this stock ics ftf http://www.4shared.com/rar/du68FPM-/SK17i_41B0431__1249-7380ftf.html?refurl=d1url via flashtool...
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
Flashed the Wifi module, did a factory reset and it's connected! Thank you so much :laugh:
my problem solved as well. i didn't read rachit.rc96's reply so i solved it the hard way
was previously on baseband 72, flashed baseband 64 then 72 back again, no luck, went back to gingerbread, rooted then was able to connect to only one of my routers, the other one wasn't even showing up then flashed stock ics rooted that, now able to connect to both routers.
was that a problem with cm9 i wonder. or what?

[Q] Cannot connect WiFi with NON-Official Build

Hi All,
This is going to sound weird, but I have tried everything and im still stuck. I have gone through the searches but unable to find a solution.
I have an i9300 International (Australian, through Optus), and it's fine except for one issue. When i flash and run a Cyanogenmod build, or basically any NON-Official (Paranoid Android, AOKP and even AOSP) ROM WiFi just REFUSES to connect to any access points. On offical ROM's (from any region) its fine.
I have tried multiple access points, every WiFi encryption, including Open, but it just does not connect. It can see WiFi networks however. I have tried multiple CM builds and others, but once again only Official ROM's work.
Has anyone else experienced this? And found a solution?
vnbm said:
Hi All,
This is going to sound weird, but I have tried everything and im still stuck. I have gone through the searches but unable to find a solution.
I have an i9300 International (Australian, through Optus), and it's fine except for one issue. When i flash and run a Cyanogenmod build, or basically any NON-Official (Paranoid Android, AOKP and even AOSP) ROM WiFi just REFUSES to connect to any access points. On offical ROM's (from any region) its fine.
I have tried multiple access points, every WiFi encryption, including Open, but it just does not connect. It can see WiFi networks however. I have tried multiple CM builds and others, but once again only Official ROM's work.
Has anyone else experienced this? And found a solution?
Click to expand...
Click to collapse
You must flash stock ICS rom with odin first, and the flash CM10 to have a working Wifi connection.
or flash XXLH1 Modem and that should fix it.
Could someone please explain why these steps must be done to get WiFi to work, and what needs to happen to eliminate this?
I have tried all these steps and it still did not work. Friends has the same phone, and we did the exact same steps with the exact same ROM's, his WiFi worked, mine did not.
I just can't understand why mine would be so different..
Sent from my GT-I9300 using Tapatalk 2
vnbm said:
I have tried all these steps and it still did not work. Friends has the same phone, and we did the exact same steps with the exact same ROM's, his WiFi worked, mine did not.
I just can't understand why mine would be so different..
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
if you have tried flashing another kernel.. and it still didn't work.
you must send it back to the service center as it may be a factory/hardware defect
i hope this helps

[Q] Problems with Wifi / 4G LTE with CM10

Hey guys,
was running Fresh 5.3.1 and went to CM 10 stable.
I did the following prior to this:
1. updated radio for s-on devices via TWRP to get to latest version
2. factory reset
3. wiped system
4. wiped cache + dalvik
5. flashed cm10
6. booted, download Titanium backup
7. Titanium complain about seeing an android device ID mistmatch and said it would fix it so I said yes
8. Observing that I cannot connect to LTE network (it won't connect and won't fail back to 3g). I can only connect to 3g when LTE isn't available. EDGE works fine.
9. Also noticing that the device doesn't switch APs well at all like my old stock ROM or FreshROM did. (It will hang on to a WIFI AP that has a weaker signal).
Anyone else having these issues? Should I not change the device ID with Titanium? Is that the cause?
TIA.
amenic said:
Hey guys,
was running Fresh 5.3.1 and went to CM 10 stable.
I did the following prior to this:
1. updated radio for s-on devices via TWRP to get to latest version
2. factory reset
3. wiped system
4. wiped cache + dalvik
5. flashed cm10
6. booted, download Titanium backup
7. Titanium complain about seeing an android device ID mistmatch and said it would fix it so I said yes
8. Observing that I cannot connect to LTE network (it won't connect and won't fail back to 3g). I can only connect to 3g when LTE isn't available. EDGE works fine.
9. Also noticing that the device doesn't switch APs well at all like my old stock ROM or FreshROM did. (It will hang on to a WIFI AP that has a weaker signal).
Anyone else having these issues? Should I not change the device ID with Titanium? Is that the cause?
TIA.
Click to expand...
Click to collapse
UPDATE 1: Also installed / flashed gapps for JB in there
UPDATE 2: I'm also running radio (baseband) 1.12.11.0809 (latest I believe). Never had any issues like this with any other ROM I've tried (stock, Fresh, OMJ, pokerom) ...
UPDATE 3: Going to try again without restored Android ID
UPDATE 4: I wiped and reflashed and did NOT restore previous Android ID via Titanium Backup and now 4G LTE works fine but I'm still having the WiFI AP issues - seems like this ROM doesn't have logic on the client side wifi stack to look for a stronger AP with the same BSSID and switch to it - I thought it was a native function of the spec but I guess not.
Now GPS doesn't work this release isn't what i would call stable
EDIT: Went into a sense based ROM and did the ##GPSCLRX# code from the dialer app, then using msl reader put in the password and after this got a GPS lock in maps then went back to cm10 and GPS is working fine again...
A few days after working all these kinks out it seems to be much better... definitely a rough start!
EDIT 2: Stock camera app is having problems... Requires rebooting the phone but third party camera apps seem to work fine.. Also intermittently having an issue where the phone seems happy to have no data connection even though it's clearly available (won't get 4G, 3G or edge)...
Sent from my EVO using xda app-developers app
if you want an answer you need to be posting your questions in the CM10 thread in the development area.

[Q] Flashed ROM now process stops

So I flashed the stock JB ROM for the AT&T variant. Now, whenever I try to do pretty much anything I get a popup saying "Unfortunately, the process android.process.media has stopped." I was going to flash back to stock using the stock ROM that's posted in the development forum but the phone also won't go into media sync mode when connected to my computer (it did before flashing).
Any help would be greatly appreciated.
80ninjas said:
So I flashed the stock JB ROM for the AT&T variant. Now, whenever I try to do pretty much anything I get a popup saying "Unfortunately, the process android.process.media has stopped." I was going to flash back to stock using the stock ROM that's posted in the development forum but the phone also won't go into media sync mode when connected to my computer (it did before flashing).
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Which ROM specifically? There were some that had this issue (one of the Korean and one of the Canadian (e973 based) that were changed for the AT&T version had this issue. When you restored your apps did you restore data too? Several of the ROM's have this issue when data is included. If you restored data, then reflash the ROM and restore the apps without data.
The SnowJB ROM is the most stable 4.x rom that has all critical features (camera, GPS, etc). If you didn't flash it, you may want to give it a try.
Edit: regarding media sync, do you mean MTP? If you can't connect MTP can you connect PC software or Camera (PTP)? If those don't work then download the ROM via wifi. If nothing else, go to original development and download the CM or CFX (SR 14 or 15) roms. They are much smaller than the 4.1.2 ROM's (just under 200MB), so they'll transfer quickly via wifi (or your data plan and won't kill you plan limits, should you go the data plan root). They JB 4.2.2 and work great, but don't have working camera or GPS, so many people can't use them as DD's. They should allow you to connect MTP so you can copy a different 4.1.2 ROM to you device.
dbgeek said:
Which ROM specifically? There were some that had this issue (one of the Korean and one of the Canadian (e973 based) that were changed for the AT&T version had this issue. When you restored your apps did you restore data too? Several of the ROM's have this issue when data is included. If you restored data, then reflash the ROM and restore the apps without data.
The SnowJB ROM is the most stable 4.x rom that has all critical features (camera, GPS, etc). If you didn't flash it, you may want to give it a try.
Edit: regarding media sync, do you mean MTP? If you can't connect MTP can you connect PC software or Camera (PTP)? If those don't work then download the ROM via wifi. If nothing else, go to original development and download the CM or CFX (SR 14 or 15) roms. They are much smaller than the 4.1.2 ROM's (just under 200MB), so they'll transfer quickly via wifi (or your data plan and won't kill you plan limits, should you go the data plan root). They JB 4.2.2 and work great, but don't have working camera or GPS, so many people can't use them as DD's. They should allow you to connect MTP so you can copy a different 4.1.2 ROM to you device.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2127346
"debloated AT&T" is what I'm using (sorry I didn't make that clear, I've been fighting this all day).
Yes, I do mean MTP. I actually just tried to use PC software and camera with no luck. I tried wiping everything, reflashing the ROM and applying the permission fixes in CWM but the errors still occur.
I'm trying to grab CFX via wifi now. Thanks for the help!
80ninjas said:
http://forum.xda-developers.com/showthread.php?t=2127346
"debloated AT&T" is what I'm using (sorry I didn't make that clear, I've been fighting this all day).
Yes, I do mean MTP. I actually just tried to use PC software and camera with no luck. I tried wiping everything, reflashing the ROM and applying the permission fixes in CWM but the errors still occur.
I'm trying to grab CFX via wifi now. Thanks for the help!
Click to expand...
Click to collapse
Format /system in cwm? Just curious...
Sent from my LG-E970 using xda app-developers app
80ninjas said:
http://forum.xda-developers.com/showthread.php?t=2127346
"debloated AT&T" is what I'm using (sorry I didn't make that clear, I've been fighting this all day).
Yes, I do mean MTP. I actually just tried to use PC software and camera with no luck. I tried wiping everything, reflashing the ROM and applying the permission fixes in CWM but the errors still occur.
I'm trying to grab CFX via wifi now. Thanks for the help!
Click to expand...
Click to collapse
Some other tricks that fixed similar issues for others:
1) use a different USB port
2) use a different USB to micro cable
3) reboot PC/Laptop (standard windows fix is to reboot 3 times, to see if it fixes the prob, before calling their helpless desk). I had to do this when I disconnected the phone without switching to charge only. I seem to recall that it took 2 reboots to finally get everything reset, so Windows would recognize the device was connected.
Jank4AU said:
Format /system in cwm? Just curious...
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the input. I actually tried that when I reflashed the ROM but it didn't help.
dbgeek said:
Some other tricks that fixed similar issues for others:
1) use a different USB port
2) use a different USB to micro cable
3) reboot PC/Laptop (standard windows fix is to reboot 3 times, to see if it fixes the prob, before calling their helpless desk). I had to do this when I disconnected the phone without switching to charge only. I seem to recall that it took 2 reboots to finally get everything reset, so Windows would recognize the device was connected.
Click to expand...
Click to collapse
I actually tried three different cables and two different machines in completely separate locations but the problem persisted throughout all. I did try rebooting twice last night. Didn't go for a third.
I finally got CFX on it this morning and the phone was recognized by the computer immediately. I'm going to flash SnowJB onto it to see if the same thing happens.
Thanks for the help!

KitKat ROMS and wi-fi - no success

Greetings!
No matter which KITKAT ROM i flash - Paranoid / Snapshot / Archidroid, i never can connect on any wi-fi.
Yes the password typed is corret, the signal is strong to excellent quality, and no matter what i try, the system doesnt get any connection through wifi.
3G is working fine tough.
Anyone has any idea about what it might be? The ROMS run just perfectly, but no wi-fi is just not bearable lol.
BTW....i restored my previous system backup which runs on SENTINEL 6.0 ROM and the wi-fi connects just perfectly...
Samsung S3 I-9300
Please any help....thanks a lot
restes77 said:
Greetings!
No matter which KITKAT ROM i flash - Paranoid / Snapshot / Archidroid, i never can connect on any wi-fi.
Yes the password typed is corret, the signal is strong to excellent quality, and no matter what i try, the system doesnt get any connection through wifi.
3G is working fine tough.
Anyone has any idea about what it might be? The ROMS run just perfectly, but no wi-fi is just not bearable lol.
BTW....i restored my previous system backup which runs on SENTINEL 6.0 ROM and the wi-fi connects just perfectly...
Samsung S3 I-9300
Please any help....thanks a lot
Click to expand...
Click to collapse
oh Gosh..... no one ?
Would love to keep my phone updated but KitKat kills my wifi connections
restes77 said:
oh Gosh..... no one ?
Would love to keep my phone updated but KitKat kills my wifi connections
Click to expand...
Click to collapse
Have you tried a proper clean install? As in wipe /data /system /preload, cache and delvik cache? (Always backup)
Some roms require a restart before wifi works, not doing a clean install, or using an incompatible kernel can also cause.
Yeah I had done a complete wipe before installing it. And also I had performed several reboots with no success after it.
The weird thing is that 3g connection runs flawlessly.
No clue at all why is this happening.
restes77 said:
Yeah I had done a complete wipe before installing it. And also I had performed several reboots with no success after it.
The weird thing is that 3g connection runs flawlessly.
No clue at all why is this happening.
Click to expand...
Click to collapse
Have you tried other wireless connections on kitkat?

Categories

Resources