[Q] Unable to download actual root file to SD card. - Barnes & Noble Nook Tablet

Hi. I am relatively new to unlocking, rooting etc. with devices like these. I was recentlt attempting to root my Nook Tablet on 1.4.3, and came acroas a thread on this site with step-by-step instructions on how to do so. Well, to get to the point, I had already formatted the card and everything, but when I went to download the actual file for the root to the card, it said the file was not found. Does anybody know anywhere else I could find the file? Im really tired of this tablet sucking ****.

If you're looking for ALbert's root image someone may have it mirrored. Check out the last page of the topic
http://forum.xda-developers.com/showthread.php?t=1439630&page=19
There are other root images available as well and tehre is also the option to install CM10. No root required prior to the install.

aerialstoner said:
Hi. I am relatively new to unlocking, rooting etc. with devices like these. I was recentlt attempting to root my Nook Tablet on 1.4.3, and came acroas a thread on this site with step-by-step instructions on how to do so. Well, to get to the point, I had already formatted the card and everything, but when I went to download the actual file for the root to the card, it said the file was not found. Does anybody know anywhere else I could find the file? Im really tired of this tablet sucking ****.
Click to expand...
Click to collapse
See http://forum.xda-developers.com/showpost.php?p=31271965&postcount=240.

Thanks a ton.

See also http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31 for some pointers/tips on risk mitigation in rooting and flashing custom ROM.

Related

Is this method safe to Root a Nook Tablet 1.41?

Yes, I've been all over these (awesome ) forums, reading and learning on how to root my new nook tablet (which I got for 224.99 btw XD )
I've been learning from this thread, http://forum.xda-developers.com/showthread.php?t=1466583&page=18
I just want to make sure that this is a known and safe method for me to use, it seemed too easy to be true...which is why I am here posting and asking about. I apologize if I am in the wrong place >.< I do hope I am in the right spot.
I appreciate any help, and look foreword to learning and getting to know the forums here.
Cheers!
Easy = Yes
Safe = Yes
Reliable = Not really
IMHO You would be better off to revert your 1.4.1 to 1.4.0 using AdamOutler's Magic SD Card and then Rooting.
At that point you can either use the method in the thread you linked OR the original Indirect Root method.
If you are on windows and have never had an android device hooked up to that computer the original method will work easily. The biggest issue it faces is the troubleshooting of the drivers when another Android device was used on the PC previously. There is however plenty of information available to help if you get stuck. The advantage of this method is it will allow you to select an alternate launcher, de-bloat B&N apps and install the OTA block. You MUST be on 1.4.0 to use this method.
The only advantage to the SD card root is that it will also help you create a ClockWorkMod (CWM) bootable SD Card. The disadvantages are you will need to install the OTA block seperatly, if you try it on 1.4.1 there are additional hoops to jump through to get side-loading supported, the files you should use are NOT in the OP and because the files have been revised several times the instructions have become convoluted. If you have read through that entire thread and are comfortable that you have pieced together all the information then you will be fine using that method.
Good luck and welcome!

[Q] help with rooting

hello all, just picked up the Nook Tablet (16g) - and of course i am wanting to root it. i have followed all the instructions from turning on USB debugging and updating my Drivers so the device is recognized as Android ADB (which took a long time) now i am trying to run the NookandZergy.bat file. it will not show any devices here. not sure what i am doing wrong.. i have tried several times and no joy. i am doing all of this with Win7 system if that matters ( i tried running Zergy as administrator also).
i am sure this problem has come up in the forums already but i have yet to find an answer yet.
thank you
rfronz1
just use sd card method? takes 10 min no adb needed
rfronz1 said:
hello all, just picked up the Nook Tablet (16g) - and of course i am wanting to root it. i have followed all the instructions from turning on USB debugging and updating my Drivers so the device is recognized as Android ADB (which took a long time) now i am trying to run the NookandZergy.bat file. it will not show any devices here. not sure what i am doing wrong.. i have tried several times and no joy. i am doing all of this with Win7 system if that matters ( i tried running Zergy as administrator also).
i am sure this problem has come up in the forums already but i have yet to find an answer yet.
thank you
rfronz1
Click to expand...
Click to collapse
I can't help you as far as the method you described above is concerned, but I can tell you from having rooted mine several times now that Albert's SD Card method (version 4.50) is super simple and has worked great for me. No Windows drivers to mess with, etc. He lays it out pretty straightforward. I use a 4gb SD card - can't remember if a 2gb will work or not. Give it a try if you got an sd card laying around.
manEEB jockey
Hi,
What is easiest, latest and safest way to root NT 1.4.1 ?
This one from Brianf21, which looks simple ?
Bootable Root SDCard 1.4.0 and 1.4.1
http://forum.xda-developers.com/showthread.php?t=1488035
Or any other SD card method (like the one mentioned above - Albert Wertz's SDNTV4.5) ?
What are advantages of each ?
Thanks.
M_B said:
Hi,
What is easiest, latest and safest way to root NT 1.4.1 ?
This one from Brianf21, which looks simple ?
Bootable Root SDCard 1.4.0 and 1.4.1
http://forum.xda-developers.com/showthread.php?t=1488035
Or any other SD card method (like the one mentioned above - Albert Wertz's SDNTV4.5) ?
What are advantages of each ?
Thanks.
Click to expand...
Click to collapse
thats the method i used literally after booting up tablet and making screen work i powered it down and rooted it using that image file. It all just depends on what you want if you want debloated no B&N stuff or you want stock but rooted with OTA updates blocked.
Personally I just rooted so I could install CWM and install cm7 I had no interest in stock or anything B&N.
Thanks nba1341.
I would like to keep B&N funcionality, but prevent OTA and be able to download/install apps from different android markets and web sites. Also, I would like to be able to unroot the device if necessary (go back to original B&N software).
Which SD method should I use (Brianf21 ?) ?
And one final question before I start the work, do I need to go through initial registration process on my brand new 16 GB NT ver 1.4.1 before starting the rooting procedure ?
I hope that rfronz1 will find this clarification useful too.
Thanks for help.

PLEASE READ: An Introduction to Android Rooting, Custom Recoveries, and Custom ROMs

Okay, this thread is going to have A TON of info. I recommend that if you are new to Android you read this thread and any questions you have I will attempt to answer to the best of my knowledge or I'm sure someone else will.
It is, in my opinion, imperative that you understand the material of this post prior to playing around with your new Android device. Much of this topic is general purpose, i.e. it could apply to any Android device but I will be making specific references for the Nook Tablet.
Root: The Android OS is a linux based OS. Thus "root access" is a term that signifies full access to the file system of the OS. Consider root access similar to "administrative privileges" on Windows. An even more extreme analogy may be if you were to buy a Windows computer and find that you only had access to "My Documents;" the Android equivalent would be buying a device like the Nook Tablet (or pretty much any other android device) and not having root access.
Root for the Nook Tablet: We have various methods for rooting the Nook Tablet. The best method, IMO, is the sdcard method found here. This method will allow you to create an external microSD card that allows you to boot into a custom recovery (more on this later) and run a script which will get you "root access."
Why do I want root?: Root access allows you to do things you otherwise would not be able to do. Installing google apps is probably the biggest reason, but other reasons include making certain modifications to the device to allow you to do more "stuff." Another big reason is to install indirect's app which will allow you to flash (fancy word for install) a custom recovery to the internal memory of the Nook. He even has an app that will allow you to unroot the device and restore it to stock (I believe as of this post the unroot app only supports the 16GB model).
Custom Recovery? What's that?: A custom recovery is, IMO, the number 1 priority when tinkering with Android. The first instance of a custom recovery you may encounter is the one I mentioned previously, the sdcard version. I actually have a card that I keep imaged with the custom recovery (Clockworkmod Recovery) ready to go should I ever need it.
Within Clockworkmod Recovery or any other custom recovery, you will be able to do a few things: install zip files, make a backup of your current OS (and restore said backups), wipe data/cache. The key here, as with a lot of this stuff, is DO NOT START SELECTING THINGS YOU DO NOT FULLY UNDERSTAND. For some reason a lot of users have a habit of wiping system and other things within CWM thus resulting in broken partitions and other issues. Follow directions. If you are unsure of something, ask a question.
Custom ROM: ROM stands for Read Only Memory. It is the operating system of Android that is on your device. The stock ROM that comes with the device, a modified version of Android by B&N is very restricting. Getting root access on this rom will open up many options for users. However, as Android is open source, we have the ability to create custom ROMs that provide even more freedom and a "pure" Android experience.
These ROMs almost always come "rooted" as well. What I mean by this is that a developer could create a ROM that does not allow the user root access. In fact, the newest policy of Cyanogenmod (a very popular and hard working ROM development team) is that ROMs will no longer come "rooted" by default. Users will have to toggle root access in settings.
Custom roms are flashed (installed) via a custom recovery like Clockworkmod Recovery. Basically, if you have CWM on your external sdcard or flashed internally, you can store the ROM zip file on your internal memory (or the external card should you choose), boot into recovery, flash the ROM and voila you will be ready to boot into a new OS (you should probably wipe data/cache as well if its a new ROM). I must stress here that it is IMPERATIVE that you make a backup of your current OS prior to installing a new ROM. This way, you can restore your previous setup should you not like the new one or if there are any issues with the new one.
Boot from sdcard? Yes we are quite lucky with the Nook such that we can boot from the external sdcard. I have already mentioned booting into CWM from sdcard but we even have the benefit of booting into a custom ROM (CM7 only currently) from external sdcard. What this means is that you leave the internal OS completely intact. This would thus allow "dual booting" i.e. you can boot into internal or boot from external.
Back to stock: Getting back to stock is incredibly easy with the Nook Tablet. I've done it myself a few times on two devices for various reasons. Many people are afraid to root or flash custom ROMs because it voids the warranty. While true, if you are able to return the device to stock conditions, B&N has no way of knowing that the device has been tinkered with and thus the Warranty remains intact.
To wrap this up, I must stress how important it is that you read, read, read and read more when doing this stuff. Follow directions to the T. Ask questions if you aren't sure about something. I know this is a long post as well but I can't stress how important it is that users understand the information I have put forth here when rooting and/or flashing custom ROMs.
Also, if someone wants to add benefits to why rooting the stock OS is useful please feel free to do so (I admittedly have little experience with the B&N stock OS and thus am not 100% positive of the benefits of rooting the B&N stock OS).
Reserved.
The Download link for the Cyanogen Mod 7 Final Image is down?
I would like to download the latest Cyanogen Mod 7 Final Image, so I found this webpage containing the latest version of this Image =
http://forum.xda-developers.com/showthread.php?t=1481826
and tried to download the SD card for the Nook Tablet..
BUT the link to the SD Card for the Nook Tablet appears to be dead..at the very least, it's not working properly.
Please, can someone direct me to a proper link to download the correct Cyanogen Mod 7 Final Image for the 16 gig Nook Tablet ?
Thanks!
I'd check/ask in the thread for that rom.
I tried to make a similiar comment on that thread, however; I recieved a notice that since I was new here, I'm not allowed to post a comment on that development thread.
That is why I'm making a similiar request on this thread.
All I'm attempting to do at this point is simply download the correct Cyanogen Mod 7 Final Image, so, I'm requesting help in that regard.
Thanks again~
um, i have a request. could you please post your questions in the 'Q&A' section.
http://forum.xda-developers.com/forumdisplay.php?f=1508
thx.
.
now having 'asked nice' for that... i have another link. imho, @succulent has a better version of the cm7 internal for 16GB. it is here.
http://iamafanof.wordpress.com/2012/06/12/cm7-2-rc1-build-20120612/#more-739
thank you, "old fart"..
Please, accept my apologies for posting on an incorrect thread.. I honestly thought that I was posting on a thread that might be able to help.
Also, thank you for posting a webpage that contains the correct Cyanogen Mod 7 Image. In regard to this better Build of the Cyanogen Mod 7 for the Nook Tablet..I admit that I'm a real noobie, I'm simply asking because I don't know.
Is the Cyanogen Mod 7 Image in the Mediafire Folder listed on that webpage ?
If so, I've opened that Mediafire folder ..this folder contains a long list of various files.. which is the correct file that I should download, and write to my sd card ?
Thank you much for your help in answering my questions~
Please take it to another thread~
GENERAL CONDUCT REQUEST
@sinatrafan:
please refrain from using CAPS to get your point across, I'm sure people with be able to read a few sentances and respond without you needing to e-yell. Another suggestion, as a new member, maybe read some of the forum guidelines to better understand how we operate. In general, ask as many questions as you'd like, but do not expect an answer every time or on your time table, just hope that you get what you're looking for. Don't forget to search for yourself, I'm sure you could have found current links, just as the link was provided to you, I'm sure they foud that link by searching. Also, you'll likely receive better help if you are polite. Thank you.
I went to that link for you, here's the direct link for both (assuming the newest is the one to get).
ROM > http://www.mediafire.com/download.php?5gw47zw4xx108gc
GAPPS > http://goo.im/gapps/gapps-gb-20110828-signed.zip
@OP and other senior members:
please don't flame people with less than 10 posts, they're new here, remember when you were new? Just try to answer questions and be helpful, or don't post. If somebody is out of line, report the post and I'll get to it soonish. Thank you.
Installing/Flashing CWM on Rooted 1.4.0 NT w/ Blocked OTA Updates
Gents,
I stepped away from the world of the Nook Tablet over the last 5-6 months in order to focus on other Android devices.
Last time I was involved with the NT, I rooted my son's NT with Indirect's 'Full Root (v1.4.0) w/ Blocked OTAs w/ ZergRush exploit' Thread.
From what it seems, there have been a few changes, including obtaining root access for NT's that have 1.4.1+ through the SDCard boot method.
Quick question:
I want to load a custom recovery on my son's NT, such as Xionia or CWM. The root via SDCard method includes this as part of the overall root method.
Is there a preferred way that I can install/flash custom recovery on my son's NT, knowing that I have a rooted 1.4.0 NT Blocked OTA updates?
Just curious.
Thank you,
BJ.
Anyone?
b1ggjoe said:
Is there a preferred way that I can install/flash custom recovery on my son's NT, knowing that I have a rooted 1.4.0 NT Blocked OTA updates?
Click to expand...
Click to collapse
I have a preference for the internal method. Plug in things are sometimes troublesome for me.
LOL! Well that's not exactly what I was asking however. As I stated, I currently have a rooted Nook Tablet (1.4.0) with Blocked OTA Updates (I used the original method from November 2011).
I am not interested in loading any kind of Custom ROMs at this time, but I do wish to add CWM or some other kind of custom recovery to my son's Nook Tablet.
Is there a recommended method to do this, without going through a re-rooting process with the 'Boot from SDCard method'?
Thanks,
BJ.
Anyone?
Nook RecoveryFlasher.apk
Search on Nook Recovery Flasher.apk and see if that app will meet your need. I believe it was created by Indirect.
Aaah ok will do. Thank you!!!!
Nook won't boot with CWM on card
Guys, am I the only one having this problem or are there others?
I've read and clearly understand the procedure to root my Nook Tablet. The problem is that no matter what I do, any time an SD card with a bootable CWM is inserted, the Nook simply refuses to start. Removing the card or for that matter replacing it with any other card that does NOT have a bootable CWM fixes the problem. It'll even boot and run the pseudo-root ROM that runs off the SDCard without actually rooting the tablet.
I've tested this with many cards and with several different ways to prepare it, and the end result is always the same regardless of what mode the Nook is in. I'm thinking that if somehow I'm not preparing the card correctly, then wouldn't the tablet simply boot up normally as it does with any other card that has no bootable CWM in it?
Since I bought my tablet at about the end of August 2012, I'm thinking B&N put something in the stock ROM to detect any other recovery and stop cold if that's what it finds. I say this because the problem is only with bootable recoveries, any bootable non-recovery works OK.
Any ideas??
humb11 said:
Guys, am I the only one having this problem or are there others?
I've read and clearly understand the procedure to root my Nook Tablet. The problem is that no matter what I do, any time an SD card with a bootable CWM is inserted, the Nook simply refuses to start. Removing the card or for that matter replacing it with any other card that does NOT have a bootable CWM fixes the problem. It'll even boot and run the pseudo-root ROM that runs off the SDCard without actually rooting the tablet.
I've tested this with many cards and with several different ways to prepare it, and the end result is always the same regardless of what mode the Nook is in. I'm thinking that if somehow I'm not preparing the card correctly, then wouldn't the tablet simply boot up normally as it does with any other card that has no bootable CWM in it?
Since I bought my tablet at about the end of August 2012, I'm thinking B&N put something in the stock ROM to detect any other recovery and stop cold if that's what it finds. I say this because the problem is only with bootable recoveries, any bootable non-recovery works OK.
Any ideas??
Click to expand...
Click to collapse
Try powering off, inserting your bootable SD card in the tablet, then plugging the B&N USB cable into your tablet. Some tablets (and there doesn't seem to be any rhyme or reason to it) will only boot from the external card if they detect the USB cable.
Saludos,
Steve
Post to Q&A and someone will sort you out.
The OP mentioned that he only dual boot bootable Cyanogenmod image is CM7. Is there a reason why CM10 is not possible? It seems the N2A people are advertising that capability on their website. I would like to be able to do that myself if possible.

Help flashing Xoom

Hi all,
Hopefully this is something fairly simple to answer, but my dilemma is that I want to flash a different ROM onto my wifi Xoom. I understand the basic process (I flashed the ROM on my old HTC Hero several times), but have been running into trouble on the Xoom and I think it boils down to the fact that Recovery Mode can't mount my SD card. I assume by SD card it means internal storage, but it can't read that or an actual SD card so I'm not sure it matters.
Anyway, after a couple of hours of research, I discovered that the best way to fix this is apparently to re-flash my recovery to version 3.2.0.0 of CWM instead of the 5.8.3.1 the current version of ROM Manager installed. After digging around, I found what I believe is 3.2.0.0, but I can't figure out where to put it so ROM Manager can find it and flash it over the current Recovery image. Also, if anyone has a link to download 3.2.0.0 that they know works, please let me know because I couldn't find a working download link anywhere.
I've also looked into doing it through Fastboot, but can't exactly figure out how to do that, either. I downloaded the fastboot.exe application and installed the Android SDK, but it tells me that it can't start because AdbWinApi.dll is missing. Being a non-developer type, I have no idea where this is supposed to come from, how I should install it, and if there's any other steps I'm missing.
So if anybody can help me out with either of these (preferably using the older version of CMW), that'd be great, but if anyone has an even easier way to do it, please share by all means. I know what I'm doing once I get to the point of installing the new ROM and Gapps, I just need my Xoom to be able to find them first.
Thanks in advance to anyone who can help out!
Stu
Use this thread
http://forum.xda-developers.com/showthread.php?t=1074979
In the future use the search button, it was pretty easy to find with just a little effort.
063_XOBX said:
Use this thread
http://forum.xda-developers.com/showthread.php?t=1074979
In the future use the search button, it was pretty easy to find with just a little effort.
Click to expand...
Click to collapse
Will do...and thanks, that worked.

At wits end with bricked 16gb Tablet

I hope someone can help me. I have a 16gb nook tablet that I rooted using the method described here http://liliputing.com/2012/03/how-to-dual-boot-cyanogenmod-7-nook-tablet-os-with-a-microsd-card.html over a year ago and I've never had an issue until last weekend. My daughter was playing a game and the nook started acting up. The touch screen became unresponsive and the screen started to flash. I let the Nook charge overnight and when I turned it on the next day the screen became stuck at the white Nook welcome screen. After 20 minutes I tried the holding down power and N button to see if I could get it to restart, but unfortunately that may have made it worse. Now my Nook won't start at all. I've read many many threads here on how to fix it, but I am not tech savvy in the slightest. The first thing I tried was Rays method http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/ but instead of getting the green checkmark I got the red X and the "nook is shutting down" message. I tried so many things that I cannot remember them all but I do know that one of the methods I tried I got this message.
E:Can’t mount / cache/recovery/command/
E:Can’t mount / cache/recovery/log/
E:Can’t open / cache/recovery/log/
E:Can’t mount / cache/recovery/last_log/
E:Can’t open / cache/recovery/last_log
After that I tried to use the method described here http://forum.xda-developers.com/showpost.php?p=24995518&postcount=1 and I did make the booktable cwm-sd and I went to lavero.burgos' thread to download the mmcblk files, but they weren't there.
Also I don't understand what adb is but I'm desperate, when I found the thread that explained it and tried to download the ADB + Fastboot + Drivers.zip that was in said thread (I'm sorry I can't remember which thread it was) the zip file didn't work.
I'm really sorry for posting yet another, "please help my nook is borked" thread but after all the reading I've done this past week the only thing I've become is very confused and frustrated. Thank you in advance to anyone who can help.
Notice on the link you posted
Ray Waldo; said:
If this procedure fails, try one of these:
Celtic has a possible solution on XDA here: http://forum.xda-developers.com/showthread.php?t=1513583
Succulent has more info on his Github page: https://github.com/succulent/acclaim_recovery_sdcard.
Click to expand...
Click to collapse
I can see how you got lost. There aren’t really any detailed instructions there.
I got the following zip from 2nd link
Flash the zip with CWM then try the bn_142_factory_recovery.zip SD card again and you should get a green checkmark this time.
udownwitopp said:
Notice on the link you posted
I can see how you got lost. There aren’t really any detailed instructions there.
I got the following zip from 2nd link
Flash the zip with CWM then try the bn_142_factory_recovery.zip SD card again and you should get a green checkmark this time.
Click to expand...
Click to collapse
Thank you for your reply. I will try this tonight and hopefully it will work.
Well I tried, and I hate asking but how exactly does someone add a zip file to an sd card after an image has been flashed to it? I've tried numerous times with sd cards of various sizes and I'm pretty sure I should have been able to do this with a 16gb card, but every time I try to drag and drop the flashstock zip over onto the card it says that there is no room available. Now I have been doing a lot of reading on here and I'm pretty sure I did not set the card up right, I did format it correctly with the sdformatter program, but I'm guessing I have to do something with the partitions on the card. I am not familiar with the programs because I've never had cause to use them before so I am not entirely sure how to do that. I tried following the directions found here http://forum.xda-developers.com/showpost.php?p=24995518&postcount=1 but I couldn't figure out how to enable boot, and lba flags. I realize that this has probably all been answered already, but again, there programs are so foreign to me that I'm not even sure what to look up first. Thank you again for any help that any one can give me.
evm22 said:
Well I tried, and I hate asking but how exactly does someone add a zip file to an sd card after an image has been flashed to it? I've tried numerous times with sd cards of various sizes and I'm pretty sure I should have been able to do this with a 16gb card, but every time I try to drag and drop the flashstock zip over onto the card it says that there is no room available. Now I have been doing a lot of reading on here and I'm pretty sure I did not set the card up right, I did format it correctly with the sdformatter program, but I'm guessing I have to do something with the partitions on the card. I am not familiar with the programs because I've never had cause to use them before so I am not entirely sure how to do that. I tried following the directions found here http://forum.xda-developers.com/showpost.php?p=24995518&postcount=1 but I couldn't figure out how to enable boot, and lba flags. I realize that this has probably all been answered already, but again, there programs are so foreign to me that I'm not even sure what to look up first. Thank you again for any help that any one can give me.
Click to expand...
Click to collapse
I'll try to explain the process for you. "The Red X" is a very common issue that people have with their devices. It's usually caused by digging into something that you don't fully understand. It's VERY important to understand the process of flashing custom ROMs because it could screw up your tablet, delete ROM partitions and such.
The first issue you need to attend to is "The Red X." First download the bn_142_factory_recovery.zip from the ray waldo site found here:
http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/
Unzip the zip file and you should have a repart.img. Use win32diskimager to write this to an SD card. Once it's done writing, put the SD card in your device and it should boot from SD card and flash stock B&N 1.4.2 to your nook (if you have problems booting from SD card plug in the USB to your computer).
If you still get "The Red X" during this process please use the following method:
http://forum.xda-developers.com/showthread.php?t=1513583
If you have further problems please post or PM me. Once you have the issue fixed I HIGHLY recommend using the SDC version. It's a lot easier than the Internal Version and will prevent mistakes from happening.
Thank you for responding. I retried the method described on Ray's site, but sadly it's still a no go. I have downloaded the parted binary and I know how to get it onto the sd card, but what I don't know is how to ADB into my device. I'm not even sure I understand what ADB is.
evm22 said:
Thank you for responding. I retried the method described on Ray's site, but sadly it's still a no go. I have downloaded the parted binary and I know how to get it onto the sd card, but what I don't know is how to ADB into my device. I'm not even sure I understand what ADB is.
Click to expand...
Click to collapse
I'm not extremely knowledgeable with the ADB tool, but it's setting up your computer so you can write commands into your command prompt that will execute actions on your device. The link for setting it up is here:
http://forum.xda-developers.com/showthread.php?t=1474956
Once you get it set up just follow the rest of the directions in the parted binary post.
datallboy said:
I'm not extremely knowledgeable with the ADB tool, but it's setting up your computer so you can write commands into your command prompt that will execute actions on your device. The link for setting it up is here:
http://forum.xda-developers.com/showthread.php?t=1474956
Once you get it set up just follow the rest of the directions in the parted binary post.
Click to expand...
Click to collapse
Thank you for a link to the post with a working zip file for adb, I've downloaded and I've tried to follow the video, but unfortunately my laptop will not read my nook at all. Every time I connect it with a usb my device manager tries to find it, but it blinks, makes an error sound and I see
OMAP4330 under other devices. I' did a search for that error and came across this thread, but again the instructions call for installing an apk on the nook and since I can't get mine to turn on, it's a no go
evm22 said:
Thank you for a link to the post with a working zip file for adb, I've downloaded and I've tried to follow the video, but unfortunately my laptop will not read my nook at all. Every time I connect it with a usb my device manager tries to find it, but it blinks, makes an error sound and I see
OMAP4330 under other devices. I' did a search for that error and came across this thread, but again the instructions call for installing an apk on the nook and since I can't get mine to turn on, it's a no go
Click to expand...
Click to collapse
There is a possibility you could have deleted some partitions important to the nook then. Have you tried making an sdc version of cm10 to see if it could boot at all? You could see if you still have the device information to backup, recreate the partitions and flash back to stock.
Use this to make a bootable cm10 card:
http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/
Just write the image file to an SD card and put it in your nook. It will boot into cm10. Once there go into your file manager and turn on root access. Go to your root drive/ROM/devconf to access all your device information. Make a backup of all them. There is a picture of my devices root drive. If you do not have the various partitions you will have to recreate them. There is a method on the Nook General Thread for doing this named "Unbrick Internal Partitions On NT" or something similar. You can use that recreate the internal partitions essential for your nook.
If you deleted the ROM partition with the Nook's product information you may be out of luck. The serial number and Mac address are the most essential, and can be found on your device hardware. The SN is under the SD slot (if readable) and Mac address is located inside your device. Not sure where I've never opened my nook to look, but probably on the WiFi chip.
Slight chance you may be able to fix it with this information and the rest of the device information you can use from a different nook since it doesn't have to do with internet and registration. There may be a way to fix that, but I don't know of any.
Best of luck. If you have problems just post a reply or send me an email.
I can get the Nook to turn on with the bootable cm10 card in it. I get the cyanoboot screen and see the boot menu, but honestly I don't know where to go from there. I think it's time for me to try and find someone who understands all of the programs involved in trying to fix this because I know I'm going to end up making things worse, if that's even possible. Thank you for trying to help me though. I do appreciate it
evm22 said:
I can get the Nook to turn on with the bootable cm10 card in it. I get the cyanoboot screen and see the boot menu, but honestly I don't know where to go from there. I think it's time for me to try and find someone who understands all of the programs involved in trying to fix this because I know I'm going to end up making things worse, if that's even possible. Thank you for trying to help me though. I do appreciate it
Click to expand...
Click to collapse
Hello! Did you ever figure out how to resurrect your Nook? I had trouble signing in Gmail and wanted to just unbrick and have the plain Nook again. I've been struggling getting the device to boot from the sd card with the repart imaged. I'm trying to get back to the ClockworkMod recovery screen but I can't at that moment. Someone suggested that I "flash" the B&N zip to the card but I'm trying to figure out how to do that.
Would love help!

Categories

Resources