Alright have a razr maxx I'm running 98.72.16.xt912.verizon.en.US jelleybean build 9.8.20-72_VZW-16. I rooted using razr blade and then installed
Cwm touch black edition. Now everytime I reboot I get stuck in a encryption unsuccessful error screen. I have tried using Matt's utility
And that gets the phone back to a usable state as long as I don't reboot or the battery doesn't die if that happens it will boot back into the encryption error. Cwm recovery put some files on the internal SD and I think that's what is causing the problem but I can't seem to delete them they are in a folder named bmm. Does anyone know what I can do to get this fix I've tried everything that I could think of but nothing is working.
Related
Hi, I've been having problems with CWM.
I was trying to install a custom rom, but I can't get the custom recovery to work...
I've tried RAZR Bootstrap Recovery, bootmenu manager, and Rom Manager.
With Bootstrap Recovery the screen goes Black and stays black forever.
With the other two, the phone just restarts without going to CWM...
I have already formated the phone every way possible (I think), but everytime I try to install a Custom Rcovery, I always fail
I have ICS (676.226.3.en.EU) on my RAZR (XT910), and root...
Someone told me about the preinstall folder, but I didn't understand.
I'm sorry, but I'm used to Samsung, and the RAZR is way more difficult to customize...
Thanks in advance :good:
MylleZ
Similar problem but with stock GB rom (2.3.6)
MylleZ said:
Hi, I've been having problems with CWM.
I was trying to install a custom rom, but I can't get the custom recovery to work...
I've tried RAZR Bootstrap Recovery, bootmenu manager, and Rom Manager.
With Bootstrap Recovery the screen goes Black and stays black forever.
With the other two, the phone just restarts without going to CWM...
I have already formated the phone every way possible (I think), but everytime I try to install a Custom Rcovery, I always fail
I have ICS (676.226.3.en.EU) on my RAZR (XT910), and root...
Someone told me about the preinstall folder, but I didn't understand.
I'm sorry, but I'm used to Samsung, and the RAZR is way more difficult to customize...
Thanks in advance :good:
MylleZ
Click to expand...
Click to collapse
Hi guys,
I have problem like this on my stock GB rom (RAZR XT-910 - 2.3.6).
After rooting and installing Razr Touch Bootstrap, device rebooted into recovery but screen is VERY dark (I can see the logo and some text over logo).
Also software appears to be functional - just tried randomly touch the screen in region where the "menu" should be and entered one of the option and screen was OK, but I don't want wipe everything accidentally .
I saw number of people had same problem with different phones on old Recovery versions but no normal solution.
Thanks for your help.
New Droid Razr MAXX.
OTA Updated to ICS. Rooted with Droid RAZR Utilities 1.40. Installed Bootstrap and recovery, made a backup. Was looking to install a ROM, saw one saying I needed Safestap. Uninstalled Bootstrap, installed Safestrap using Utilities 1.40. Ran Safestrap, Installed recovery, rebooted, enabled Safe-system. Rebooted. I have a black screen, nothing happens when I push and hold any buttons. I have a brick as far as I can tell. Any suggestions? What did I do wrong?
Ok. Holding key combos got it to reboot with vol-down and power. If I let it go past the safeboot splash without hitting anything it goes black.
Went back into recovery, disabled safe-system, reboot and and it works ok.
How can I get into safe-system and flash a this rom? Did I do something wrong in the process?
Use 1.81 utility to flash stock 211 and start over. Install superuser/root and busybox then install safe strap and install recovery. From there make a backup and then enable safe mode. Use rom that you put on external SD card and install. Wipe data before booting new rom.
SHVR MAXX
I have a moto razr xt910 on rogers, unlocked, originally booted with the fido logo.. I've been using bootmenu manager to dual boot and try roms (mainly cm10) on 2nd system. I tried unsuccessfully to flash Wizzed bean rom in 1st sytem cause I didnt wanna lose my setup in 2nd system whcih was pretty good. I rebooted after it failed instead of staying in the bootmenu manager bootmenu and havent been able to get it back, just bootlooped for a while and tried to flash from recovery. Failing that, I got RSD lite and the rogers fastboot ICS file, but it returned an error in 6/21 "cdt.bin" phone returned "fail" or "failed". Online it seems that that using the motorola factory cable can often solve this problem, but unsurprisingly the one I tried to make didn't work. Do you think you could help me?
Thanks,
Me
I decided to flash a factory image since the GPS was not working anymore with whatever ROM I tried, plus random problems. The phone was previously set up with CM10.1 and BMM.
Installed RSD Lite, Moto drivers, downloaded several stock ROMs.
From the factory recovery mode I cannot flash any of those zip files so I proceed with RSD lite. I flashed "9.8.2O-124_SPUEM-14_S7_USASPDRICS01O2UKE1007.0R_USASPDRJBO2GB_P013_A012_p2b_S1FF_fb.xml.zip" which is a retail UK JB image. The phone shows the very first boot screen (red logo) and then the screen goes blank. The computer still sees an MTP device, though only in device manager.
I've tried installing other images but they are an older type (ICS I guess, 01.6.7.2-180&01.6.5.1-167) and RSD shows an error while trying to flash the first file from the archive.
Oh, I still have the "Customer error: contact dealer" on the first boot screen, I think this was from a ICS to JB upgrade with CID deletion(?).
I've already flashed twice using RSD, deleted cache+data, rebooted and left the phone to start up for ten of minutes, don't know what to do. RSD lite reports that flashing was ok.
been there
brainwash123 said:
I decided to flash a factory image since the GPS was not working anymore with whatever ROM I tried, plus random problems. The phone was previously set up with CM10.1 and BMM.
Installed RSD Lite, Moto drivers, downloaded several stock ROMs.
From the factory recovery mode I cannot flash any of those zip files so I proceed with RSD lite. I flashed "9.8.2O-124_SPUEM-14_S7_USASPDRICS01O2UKE1007.0R_USASPDRJBO2GB_P013_A012_p2b_S1FF_fb.xml.zip" which is a retail UK JB image. The phone shows the very first boot screen (red logo) and then the screen goes blank. The computer still sees an MTP device, though only in device manager.
I've tried installing other images but they are an older type (ICS I guess, 01.6.7.2-180&01.6.5.1-167) and RSD shows an error while trying to flash the first file from the archive.
Oh, I still have the "Customer error: contact dealer" on the first boot screen, I think this was from a ICS to JB upgrade with CID deletion(?).
I've already flashed twice using RSD, deleted cache+data, rebooted and left the phone to start up for ten of minutes, don't know what to do. RSD lite reports that flashing was ok.
Click to expand...
Click to collapse
Did you erase CID?
if you did yo need to boot in a different way
U did a factory reset in stock recovery? U cannot flash a ics image after flashing jb via rsd. Try again jb EU image than go to stock recovery and perform the wipes
Tapped from my RazR
Got it "fixed", finally. I had to go back into the stock boot/recovery menu and choose "BP Tools", last option from the menu and then it booted normally.
I still have to do this after each reboot because it boots to the black screen: hold the three buttons together until it flashes (which means a hard reboot), let go of the power button, press power button again while the other two are still pressed.
On the plus side the GPS started working again after factory reflash which it was kind of expected since the same chip is providing also WiFi and bluetooth which were running fine.
I have a root question: the device was rooted with the virtual machine procedure but after a factory reset the root was lost. I had saved it using Voodoo RootKeeper and the app shows: superuser installed, device rooted, /system supports root protection, protected su available. The "root permission granted" checkbox is disabled though and no application is able to retrieve the root. The su binary is in both /bin and /xbin so I don't understand how it can not function.
Edit: ok, got it, the su binary has -rwsr-sr-x and the owner is root so random users cannot execute it. I also cannot change the permissions so I probably have to root again and figure out a way to keep the root after a factory reset. It makes sense to install BMM since it can take care of permissions.
Hi, been modifying my XT910 for a while but this is the first time I don't know how to fix something, here is the situation...
My phone was working perfectly fine, using latest stable CM 10.1.3 on slot 1 using BMM, but this morning I uninstalled BMM to flash SS, the issue was, after uninstalling BMM wife called me and I forgot to install SS or any other boot manager, a few minutes later phone froze with sound bug and I had to restart the phone with 3 finger salute. Now the phone won't boot into any other roms (I had latest CM 10.2.x on second slot) and I can only boot to fastboot or the boot mode selection menu, can't even access stock recovery, get an error.
I know I can recover by using RSD Lite and flashing the stock rom, but doing so will delete my internal SD and the problem is, I haven't done a backup of it in a while (I think over a month) and I have very important work documents in there that I really need.
Is there a way to:
A) Flash stock with RSD without loosing the contents on my internal SD?
B) use adb to pull my files into my PC (tried this, keep getting access denied)?
C) Flash BMM from fastboot?
Many thanks and please respond promptly, currently at work with no phone and don't have a spare, so loosing client calls
Update:
After all day trying finally found a way to wipe all and restore stock rom without deleting internal sd contents, phew...
My internal got never wiped though rsd..... How did u solve ur problem? Would u tell us?
Tapped from my RazR