Hi Guys
Help needed!!!
1) I rooted my Phone with Oden v 1.85
2) Installed Recovery-cwmtouch-6.0.3.1
3) Then installed FoxHound 4.1.2 XXEMA2 Jelly Bean Custom ROM on my Galaxy S3
This was all not that difficult. But can someone please help me in telling me the process to remove FoxHound and revert back to stock SAMSUNG ROM? I have already downloaded the stand alone ROM from SAM Mobile. What do I do with the CWM Touch that is installed on the phone and how do i revert to standard ROM? Would be much appreciated since i am not very good at this
Thanks beforehand
Aquacile said:
Hi Guys
Help needed!!!
1) I rooted my Phone with Oden v 1.85
2) Installed Recovery-cwmtouch-6.0.3.1
3) Then installed FoxHound 4.1.2 XXEMA2 Jelly Bean Custom ROM on my Galaxy S3
This was all not that difficult. But can someone please help me in telling me the process to remove FoxHound and revert back to stock SAMSUNG ROM? I have already downloaded the stand alone ROM from SAM Mobile. What do I do with the CWM Touch that is installed on the phone and how do i revert to standard ROM? Would be much appreciated since i am not very good at this
Thanks beforehand
Click to expand...
Click to collapse
Please read the faqs and guides first .
See return to stock for warranty post in General section .
jje
just flash a stock rom from desktop odin. you really should concentrate on basics
sent from my GT-I9300 running CM10.1 RC4.4 by Temasek
sriram231092 said:
just flash a stock rom from desktop odin. you really should concentrate on basics
sent from my GT-I9300 running CM10.1 RC4.4 by Temasek
Click to expand...
Click to collapse
Found the Unroot page here http://forum.xda-developers.com/showthread.php?t=1710613, however I have one question! After step 7 must the Phone be in Download mode (Reboot: Home,Lock and Volume Down) to proceed to step 8?
Aquacile said:
Found the Unroot page here http://forum.xda-developers.com/showthread.php?t=1710613, however I have one question! After step 7 must the Phone be in Download mode (Reboot: Home,Lock and Volume Down) to proceed to step 8?
Click to expand...
Click to collapse
Yes download mode .
jje
JJEgan said:
Yes download mode .
jje
Click to expand...
Click to collapse
Okay followed the Procedure but after first reboor Device stays Loops on Samsung Logo, what now guys, do i put it in download mode agian and resend the Stock firmware with Odin or recovery mode ....then?
Aquacile said:
Okay followed the Procedure but after first reboor Device stays Loops on Samsung Logo, what now guys, do i put it in download mode agian and resend the Stock firmware with Odin or recovery mode ....then?
Click to expand...
Click to collapse
Fixed Thanks
Related
Hey Guys Please Help Me
I was running rootbox rom 1.7 then i decided to factory reset and erase sd card from the phone i did it and when i rebooted the phone it was stuck at the galaxy s2 boot screen and then a black screen comes i tried to open the recovery but it also do the same problem
mo7ammed3adel said:
Hey Guys Please Help Me
I was running rootbox rom 1.7 then i decided to factory reset and erase sd card from the phone i did it and when i rebooted the phone it was stuck at the galaxy s2 boot screen and then a black screen comes i tried to open the recovery but it also do the same problem
Click to expand...
Click to collapse
Can you get into download mode?
kilometers4 said:
Can you get into download mode?
Click to expand...
Click to collapse
Yes
thanks for the reply
mo7ammed3adel said:
Yes
thanks for the reply
Click to expand...
Click to collapse
Good, then you can follow up with what he is hinting at . Flash the original firmware back on it and continue from there
Syrellaris said:
Good, then you can follow up with what he is hinting at . Flash the original firmware back on it and continue from there
Click to expand...
Click to collapse
sorry i am a noob
but i can get any original firmware or according to my region ?
i logged in to sam mobile and i found many firmwares choose any one of the ?
thanks for the reply
sam mobile should have the original firmware for your region. the latest and the older ones I believe. Any original and official firmware, even older ones should work fine. You could always update back to the latest official one using kies once your phone works again.
Alternatively you can check http://forum.xda-developers.com/showthread.php?t=1075278 for your region specific firmware. Just follow the intstruction of flashing with odin and it should be fine.
Syrellaris said:
sam mobile should have the original firmware for your region. the latest and the older ones I believe. Any original and official firmware, even older ones should work fine. You could always update back to the latest official one using kies once your phone works again.
Alternatively you can check http://forum.xda-developers.com/showthread.php?t=1075278 for your region specific firmware. Just follow the intstruction of flashing with odin and it should be fine.
Click to expand...
Click to collapse
Thanks mate
do i have to download the kernel ?/
The entire firmware info package you can download from the XDA thread has the kernel already. The Stock kernel download is just to reflash the kernel in say errors with kernels or if you flashed a CF-root kernel and want it back to original. Follow the instructions in the opening post regarding to flashing with Odin completely.
Syrellaris said:
The entire firmware info package you can download from the XDA thread has the kernel already. The Stock kernel download is just to reflash the kernel in say errors with kernels or if you flashed a CF-root kernel and want it back to original. Follow the instructions in the opening post regarding to flashing with Odin completely.
Click to expand...
Click to collapse
Thanks i downloaded the firmware from sam mobile and flashed it using odin
i booted into the recovery and wiped data and cache partition and my phone came back to life
mo7ammed3adel said:
Thanks i downloaded the firmware from sam mobile and flashed it using odin
i booted into the recovery and wiped data and cache partition and my phone came back to life
Click to expand...
Click to collapse
Awsome As long as you read the threads carefully over here on XDA regarding flashing roms and kernels and stuff you will do fine Just follow the instructions
Hi everyone. I have rooted my phone with Exynosabuse and flashed CWM Recovery with ROM manager premium, then I unrooted my phone and uninstalled rom manager, but still stuck with CWM Recovery. My question is how to return to stock recovery? ( thanks in advance for any help ) also can I update my s3 via KIES while having this CWM recovery? ( notice that my phone now is unrooted )
flash stock ROM using odin
one more question
XeactorZ said:
flash stock ROM using odin
Click to expand...
Click to collapse
Thanks
But one more request, can u get me a link for leaked official 4.1.2 jelly bean rom for s3? I will be very thankful if u fetched my one.
Btw my baseband (I9300XXDLID ) if u need it.
u take recovery.img from stock rom..flash it using mobile odin...
Mostafa Wael said:
Hi everyone. I have rooted my phone with Exynosabuse and flashed CWM Recovery with ROM manager premium, then I unrooted my phone and uninstalled rom manager, but still stuck with CWM Recovery. My question is how to return to stock recovery? ( thanks in advance for any help ) also can I update my s3 via KIES while having this CWM recovery? ( notice that my phone now is unrooted )
Click to expand...
Click to collapse
Read the returning to a warranty state post .
Basics as posted multiple times are .
Run Triangle Away .
Flash stock rom
Factory reset .
jje
Wrong section, post in QA
Mostafa Wael said:
Thanks
But one more request, can u get me a link for leaked official 4.1.2 jelly bean rom for s3? I will be very thankful if u fetched my one.
Btw my baseband (I9300XXDLID ) if u need it.
Click to expand...
Click to collapse
leaked official 4.1.2 ????
just go sammobile website search and download for your country if you want
else flash any country version also okay
Just use kies, it's safer and easier...
About how much percent ODIN can fail in flashing rom to s3? Still didnt receive updates on KIES so i want to flash it via ODIN. Also how many time ddoes it take for ODIN to complete flashing??
Get the galaxy s3 toolkit. It includes odin and a copy of the stock recovery you can flash.
Flashing the recover with odin takes under a minute. Flashing a complete rom with odin takes about 5 minutes maximum.
Sent from my GT-I9300 using xda app-developers app
Mostafa Wael said:
About how much percent ODIN can fail in flashing rom to s3? Still didnt receive updates on KIES so i want to flash it via ODIN. Also how many time ddoes it take for ODIN to complete flashing??
Click to expand...
Click to collapse
0% fail if you follow the instruction
just need samsung kies (you need the usb driver, not kies because install samsung kies will automatically install the driver also)
and odin and the ROM (in .tar or .tarmd5, depends, confirm is end with .tar and put in pda
and take less than 10 minutes
flashed my s3 via mobile ODIN pro and it worked like a charm.....
Finally flashed my phone, but with mobile ODIN pro. My question is how to get the 4.2 camera on jelly bean 4.1.2 XXELKC. ? Thanx for all your help guys. ..
Flash a custom rom with the mod .
See Android Development Omega rom for one .
Or find the files and push them yourself to the custom rom .
Have a look in Themes and apps and see if its also posted as a standalone mod .
jje
Mostafa Wael said:
Hi everyone. I have rooted my phone with Exynosabuse and flashed CWM Recovery with ROM manager premium, then I unrooted my phone and uninstalled rom manager, but still stuck with CWM Recovery. My question is how to return to stock recovery? ( thanks in advance for any help ) also can I update my s3 via KIES while having this CWM recovery? ( notice that my phone now is unrooted )
Click to expand...
Click to collapse
personnaly i do it with mobile odin a choose the firm i want and remove all letting just recovery
ultimarom flashing. .
Noob question:
it's said that ultimarom can be flashed using clockworkmod recovery 6.0.1.2 or 6.0.1.9. I have 6.0.2.7. Can I Flash ultimarom using this version ? Thanks for all xda-developers members helping me
Mostafa Wael said:
Noob question:
it's said that ultimarom can be flashed using clockworkmod recovery 6.0.1.2 or 6.0.1.9. I have 6.0.2.7. Can I Flash ultimarom using this version ? Thanks for all xda-developers members helping me
Click to expand...
Click to collapse
It depends upon the instructions for that rom you need to read them .
But CWM recovery flash is the norm for most custom roms .
jje
Stock Recovery
If you just want the Stock Recovery for example for OTA, just flash the stockrecovery.tar via ODIN. Even I don't like using ODIN too much, but it's a million times better than Kies and easy to use. I personally recommend using ODIN on the PC if possible and avoid Mobile Odin. Mobile Odin is only if you don't have a PC or really need to do something on the go. It's a great app but don't use it all the time. And I'm not sure about this but I think by just flashing the Recovery you won't loose root nor Data, so you save a lot of time!
Only crappy thing with Odin is that it needs TAR and I don't know how to make those excpet with Toolbox. Does anybody know an easy way to make a flashable tar on windows without toolbox or cygwin (linux).
[
Only crappy thing with Odin is that it needs TAR and I don't know how to make those excpet with Toolbox. Does anybody know an easy way to make a flashable tar on windows without toolbox or cygwin (linux).[/QUOTE]
Probable found in the development and hacking section of xda developers forum .
jje
mega bass beat option
I've read about the "flashing mega bass beat option to s3" and it says
-- install zip from sdcard
-- chose zip from sdcard
-- wait for installation to complete
-- wipe cache partition
-- wipe dalvik cache
-- wipe fix permissions
The question is: what will happen if I didn't wipe the dalvik cache?
Do I really need to wipe it?
Glebun said:
Wrong section, post in QA
Click to expand...
Click to collapse
Then what is this? Is it some another forum?
Hello,
1- sorry for my English
2- I have got galaxy GT - I9300 , I was able to connect to ( Samsung Kies ) and ( Odin3 )
3- I un-rooted the phone and upgraded it to Jellybean 4.2.2
4- Now I can't connect to both of ( Samsung Kies ) or ( Odin3 )
5- I installed different drives and they all failed
6- I still can see my phone connected to PC as portable media player ? it appears in the device manager ( GT - I9300 )
7- I need to know how to come back to the original firmware ( step by step )
8- am I supposed to uninstall kies and driver before starting ?
9- Finally , Does ( Samsung_Galaxy_S3_ToolKit_v7.0 ) concerned with original firmware or custom roms ?
thanks
Mishoo66 said:
Hello,
1- sorry for my English
2- I have got galaxy GT - I9300 , I was able to connect to ( Samsung Kies ) and ( Odin3 )
3- I un-rooted the phone and upgraded it to Jellybean 4.2.2
Their is no upgrade to 4.2.2
What how did you upgrade Kies OTA what firmware .
Post in black difficult to read this colour .
Do you have I9300 ??
jje
Click to expand...
Click to collapse
JJEgan said:
Mishoo66 said:
Hello,
1- sorry for my English
2- I have got galaxy GT - I9300 , I was able to connect to ( Samsung Kies ) and ( Odin3 )
3- I un-rooted the phone and upgraded it to Jellybean 4.2.2
Their is no upgrade to 4.2.2
What how did you upgrade Kies OTA what firmware .
Post in black difficult to read this colour .
Do you have I9300 ??
jje
Click to expand...
Click to collapse
I have samsung galaxy s3 I9300 , with firmware 4.2.2 ( Jelly Bam 7.5.0 )
I want to go back to the original firmware
thanks
Click to expand...
Click to collapse
Mishoo66 said:
JJEgan said:
I have samsung galaxy s3 I9300 , with firmware 4.2.2 ( Jelly Bam 7.5.0 )
I want to go back to the original firmware
thanks
Click to expand...
Click to collapse
So your original post is wrong .
I un-rooted the phone and upgraded it to Jellybean 4.2.2
Not an update a custom rom .
Millions of posts on here how to go back TUTS stickys how to films books even a play .
Did you bother looking reading the faqs and guides ???
http://forum.xda-developers.com/showthread.php?t=1978840
jje
Click to expand...
Click to collapse
JJEgan said:
Mishoo66 said:
So your original post is wrong .
I un-rooted the phone and upgraded it to Jellybean 4.2.2
Not an update a custom rom .
Millions of posts on here how to go back TUTS stickys how to films books even a play .
Did you bother looking reading the faqs and guides ???
http://forum.xda-developers.com/showthread.php?t=1978840
jje
Click to expand...
Click to collapse
no
my original post is right
my phone firmware was 4.1.2 ( original ) and rooted
and i did un-roote and changed to jellybam 7.5.0
now i need to go back to the original
and i asked about Samsung_Galaxy_S3_ToolKit_v7.0 >> does it help in my situation
Click to expand...
Click to collapse
Find your stock Rom and flash with Odin
slaphead20 said:
Find your stock Rom and flash with Odin
Click to expand...
Click to collapse
please
understand my problem
i told you before that the mobile can't connect to either kies or odin ?
Mishoo66 said:
please
understand my problem
i told you before that the mobile can't connect to either kies or odin ?
Click to expand...
Click to collapse
There is no other way than odin or mobil odin , if you are on a custom rom it maybe rooted already so try installing mobile odin and flash with it.
Link for mobile odin : http://forum.xda-developers.com/showthread.php?t=1347899
EDIT : I forgot to add try uninstalling Kies and samsung USB drivers then install this drivers.rar it should work .
Fygaroo said:
There is no other way than odin or mobil odin , if you are on a custom rom it maybe rooted already so try installing mobile odin and flash with it.
Link for mobile odin : http://forum.xda-developers.com/showthread.php?t=1347899
Click to expand...
Click to collapse
how to know if it is rooted or not ?
if it is un rooted i cold not flash jellybam 7.5.0
EDIT : I forgot to add try uninstalling Kies and samsung USB drivers then install this drivers.rar it should work .[/QUOTE]
i'll try your driver
thanks
Fygaroo said:
There is no other way than odin or mobil odin , if you are on a custom rom it maybe rooted already so try installing mobile odin and flash with it.
Link for mobile odin : http://forum.xda-developers.com/showthread.php?t=1347899
EDIT : I forgot to add try uninstalling Kies and samsung USB drivers then install this drivers.rar it should work .
Click to expand...
Click to collapse
Thank you Thank you Thank you Thank you Thank you Thank you Thank you Thank you
finally it works with your magic driver ODIN CONNECT !!!!!
One more question
i noticed that custom roms consume battary much more than original firmware !!
Am i wrong ?!!
Mishoo66 said:
One more question
i noticed that custom roms consume battary much more than original firmware !!
Am i wrong ?!!
Click to expand...
Click to collapse
I usually find stock roms use more battery as custom roms sometimes have a lot of bloatware removed which would run in the background and consume ram, cpu time and could wake the device from deep sleep.
Ps: Fygaroo post that helped you would look even better by pressing thanks on it.
Sent from my GT-I9300 using xda premium
Hi guys.
Well I was teaching my friend via FB how to use Odin to root his s3, unfortunately he forgot to mention that he was using the 4g version 19305.
So we have flashed the 19300 files on the device using Odin, and now his phone will only boot into download mode I beleive.
I just want to be able to restore his phone to stock, unroot and reset counter.
ANy help is truly appreciated.
Thnk you.
kentykentkent said:
Hi guys.
Well I was teaching my friend via FB how to use Odin to root his s3, unfortunately he forgot to mention that he was using the 4g version 19305.
So we have flashed the 19300 files on the device using Odin, and now his phone will only boot into download mode I beleive.
I just want to be able to restore his phone to stock, unroot and reset counter.
ANy help is truly appreciated.
Thnk you.
Click to expand...
Click to collapse
Why return it to stock? I would recommend flashing an i9305 recovery from Odin then flashing an i9305 pre-rooted ROM via recovery....
However, heres how to return it to stock.
http://forum.xda-developers.com/showthread.php?t=1671969
You need it to boot (With rooted) to be able to reset the counter though. It may not even need resetting yet though. Check download mode for info
rootSU said:
Why return it to stock? I would recommend flashing an i9305 recovery from Odin then flashing an i9305 pre-rooted ROM via recovery....
However, heres how to return it to stock.
http://forum.xda-developers.com/showthread.php?t=1671969
You need it to boot (With rooted) to be able to reset the counter though. It may not even need resetting yet though. Check download mode for info
Click to expand...
Click to collapse
thanks man, I will try.
rootSU said:
Why return it to stock? I would recommend flashing an i9305 recovery from Odin then flashing an i9305 pre-rooted ROM via recovery....
However, heres how to return it to stock.
http://forum.xda-developers.com/showthread.php?t=1671969
You need it to boot (With rooted) to be able to reset the counter though. It may not even need resetting yet though. Check download mode for info
Click to expand...
Click to collapse
Hey man, he is using the 19305 model from Australia.
I just need a link that refers me a site or post that will let me download the Stock rom, or any rom that will allow the s3 to be usable again.
kentykentkent said:
Hey man, he is using the 19305 model from Australia.
I just need a link that refers me a site or post that will let me download the Stock rom, or any rom that will allow the s3 to be usable again.
Click to expand...
Click to collapse
sammobile.com
kentykentkent said:
Hey man, he is using the 19305 model from Australia.
I just need a link that refers me a site or post that will let me download the Stock rom, or any rom that will allow the s3 to be usable again.
Click to expand...
Click to collapse
Best bet to find your firmware is sammobile.com
Hi,people! I've tried to downgrade my sgs 3 i9300 to stock android rom 4.1.1 from 4.2.1 and now im stuck on download mode. Odin find the phone, do what nust to do and stuck on NAND write start... s3 is still attached to the copmuter...Please help, i badly need phone...
Raske said:
Hi,people! I've tried to downgrade my sgs 3 i9300 to stock android rom 4.1.1 from 4.2.1 and now im stuck on download mode. Odin find the phone, do what nust to do and stuck on NAND write start... s3 is still attached to the copmuter...Please help, i badly need phone...
Click to expand...
Click to collapse
Download a new rom .
Reflash if that fails you require a service centre repair .
same suggestion as posted above.
353039855598
JJEgan said:
Download a new rom .
Reflash if that fails you require a service centre repair .
Click to expand...
Click to collapse
Ok man, thank you...:crying: