Related
Hi cracks,
Just read somewhere in another thread that somebody was asking about the bad colors of WM6 and that it was much better under WM5.
But now it is even not possible with downgrading to WM5 to get the right settings back.
This is the same for me (S200 G4). All pictures and movies are looking bad just as you would have not enough colors anymore.
Any idea what it is or how to solve that?
Am I really the only one having this problem?
Is there perhaps a registry setting for adjusting that?
Thanks,
Boris
I would like to know the answer too
I also have the same problem. Anybody knows a solution?
My screen got fixed.
After resetting to WM5 I still had the problem. But after Hard resetting twice it's fixed. Boris03, Could you confirm this. I would like to upgrade again but not at the cost of busting my graphics, So I don't want to experiment again. Thanks
Problem back again
After a few minuts when I turned it on again, the problem was back. So I'm sorry for the wrong info, but it was fixed for a few miutes for sure.
are you guys talking about camera pictures & vidz ? if so, it's just that your device is overclocked while it shouldn't.... if not, describe your problem better so that someone can answer it... post screenshots... help yourself.
Screen shots
I am speaking of the windows screens actually. It is not noticable on all screens but ones with gradient shades show it and also where there are menu buttons. I took Lastnikita's advice and took screen shots.......... but on my PC the screens look perfect.
I'll try to explain what I see on my PPC. In terms of RGB, it looks like the blue has shifted from the rest of the colors a bit to the right. This is noticable in menu buttons where the left half looks pinkish while the blue overlaps the button boundary and sticks out the right. In gradient colors i.e. the contacts screen there is a blue column on the laft of the screen and a lot of pink around the middle. The effect looks like a low bitrate image. Maybe I can use a seperate camera to take a picture.
I have downgraded after using Touch X ROM and am now using 2.20.7.34 WWE ROM.
Thanks.
If you used a software screenshot, it would have taken an image of what was supposed to be shown. To me it sounds like a hardware fault rather than a driver related issue.
Yes. I just found this out and I was thinking the same thing. But the similarity of the problem looked strange. Maybe the problem is not the same either. Thanks.
Thanks for the advice. I just opened up my Neo and undid the ribon to the display then plugged the ribon back in. It's fixed. Thanks everybody.
Pretender9 said:
Thanks for the advice. I just opened up my Neo and undid the ribon to the display then plugged the ribon back in. It's fixed. Thanks everybody.
Click to expand...
Click to collapse
Wow, very luckly, I have same problem. Can u guide in detail for me? What is the ribon? If have pics is better. Thanks!
I'd like to help. But are you willing to risk of opening up your PDA? I was desperate.
This will void your warranty.
I tried to write a description but it's too hard
The basic idea is to open up the back. 2 screws are visible under the battery cover the other two are under the Camera cover plate which is the only hard part to remove. It has catches on both sides near the bottom edges. If this is opened then you can see the other 2 screws. Once unscrewed you can take off the back panal. It also has some catches but they give in to a little pressure in the joining gap. I used my nails to liver it. The back has to be taken away carefully as the speaker is connected to this and you don't want to break the wire. Once this is open and you place the back cover beside the unit so the wire is not streached you can start working on the ribbon.
You'll see a copper ribbon just above the IR port connecting to the motherboard. It is locked with a clip. You can unlock the clip by ..................
I'm not sure you're interested anymore. . Let me know if you are.
It would be better with pictures or MSN maybe.
I don't know if this forum has a rule against giving out MSN IDs.
well, maybe I should bring my Neo to the store (still warranty more 6 months left ^-^). I only used PDA for more 1 month, so I don't know much about them. Concern to hardware maybe I can't do well as you ^-^.
Thank you very much for helping me!
I am from Vietnam, so my English is bad. I don't know the following is true or not? ^-^
God help you!
Bad colors since WM6
Hi all,
I cannot believe that this should be a cable problem. It was just since I was upgrading to WM6 and the downgrade is not solving the thing anymore.
It is just like you display a video or pictures with 16Mio Colors on a 16Color display. And before the same video and pictures looked brilliant.
On other thing is that e.g. the background pictures (theme) from Gullum are looking bad as well.
And also I can see the background colors flickering a little bit from time to time. Again this is since i upgraded the first time to WM6.
S200 G4, No overclocking.
Thanks,
Boris
The easy way to check out if its a cable problem is by taking screen shots. If they look good on the PC then chances are very high that it is a physical problem and just might be a cable problem. If they are the same on the PC as on the PPC then it obviously is not a similar problem to mine.
Thanks
hey everybody!
just noticed that my lower microphone is covered by sth from inside the case. it looks similar to the attached photo, but my microphone is even more covered from this white thing inside as seen on the photo. the black hole seems so be nearly outside. the other micro on top is centered right.
is anybody of you experiencing the same?
could be relevant for my acoustics probs.
thanks!
no ones able to check his own s2 and tell me if he look at the same thing!?
It's probably this: http://forum.xda-developers.com/showthread.php?p=16909752
thanks man! but won't open my samsung..
how is it with your device?
Well folks, during a screen cleanup today i found a weird dust, an isolated white dot apparently under the glass far away from the borders and completely alone, i checked the screen above the point and it's perfectly smooth, can't be a scratch.
I know that's supposed to be impossible, and the only way this could happen is during the manufacturing process, but it's not the first time i cleaned up the screen and i never found this little guy.
I don't know exactly if this thread is a question because in theory there's nothing i could do, or there is? Don't take this thread as Spam i'm just trying to understand this tiny little white abomination of nature under my screen.
Regards.
I've seen something like that but his phone is sgs.. Can you attach a picture of it? Try to search youtube maybe you will find what i was referring to.. Dunno how he handled it but maybe you can send him a private message..
Sent from my GT-I9100 using xda premium
I'll try to get a good picture.
Most of the topics i found were from HTC's, one guy from Sansung Jet, and another one with a Galaxy Tab, the last one send to warranty, don't know if Samsung did something, anyway, for me it's not an option.
That is strange. I recall that this was an issue widely discussed on the original Google Nexus built by HTC, but I've not seen it on a Samsung device.
It was due to the seal, as I recall, around the screen and the dust entered from the inside of the device, ostensibly via the battery compartment.
Google did replace them under warranty. You might contact Samsung about it.
So for those who have cracked their polycarbonate housing, badly scratched it or simply got tired of the old colour there is a way you can replace the housing yourself and it's a lot easier than it sounds and will cost you about 70 GBP if you are in the UK.
WARNING! I spoke to Nokia about it and this obviously voids your warranty so only do it if you don't care I did it myself and it worked, if you break something along the way I will not be responsible! Perform this at your own risk!
That being said the actuall process is very very easy and anyone with a screwdriver, a bit of common sense and a spare half an hour will be able to do this.
So first of all you need to order the spare parts. If you are changing the colour you'll need to order three: the housing, usb cover/flap, sim tray. If you replace with the same colour you dont need a new sim tray as you can use the old one. You also dont need to buy the USB cover as the old one can be taken off and put on the new body(however this requires you pulling it off with quite a bit of force which could result in breaking it or making it fit less firmly in future so i suggest that you do buy the new USB door either way) The process of placing a new one on is way easier than taking it off.
I ordered my parts off ebay from "Headlane Ltd"
here is the link for the cyan battery cover:
http://www.ebay.co.uk/itm/GENUINE-N...ps=63&clkid=6717331277486914548#ht_1577wt_854
Search for other parts simply changing the colour in the name or just type " lumia 800 sim tray" or "lumia 800 Usb door"
Anyway once you've ordered the needed items it's time to watch a youtube giude.
http://www.youtube.com/watch?v=YS9azQLWNAI
Now this is a FULL-FULL guide on how to completely tear the device apart. If you are only changing the housing then watch the first couple of minutes and the last ones.
Basically you only need these steps:
1. Taking off the screen
2. Taking off the battery cover
3. Taking out the battery
4. Taking out the motherboard
The rest (flash, side buttons, headphone jack, speaker, various antennas etc) stay in the old body and will be supplied in the new one so dont take them out. Although the middle of this video talks about how to do that. But i'll repeat again:
if you are just replacing the housing you dont touch those, it will be supplied in the new one. Basically you'll be able to see it when comparing what your new housing looks like to the one you just took off your phone. When they look the same, stop, FF to the end of the video where its being put back together and start doing that.
I did this myself in less than 20 minutes having watched the video prior to process. I wanted to change my black housing to cyan and did just that.
I've uploaded two images, one is work in progress and the other is finished work!
I'm in a bit of a hurry now otherwise i would make it more detailed, so if there are any questions post them! Plus the video is very very good at explaining this so thumbs up for the maker!
UPDATE:
Just wanted to add a couple of things now that i have a bit more time:
1.If you are changing the housing cover only whether it's to the same or different colour the relevant part of the video is up to 4:47 and from 14:27.
2.The things that come supplied with the new housing and therefore should be left in the old one are:
Speaker at the bottom
3g/gsm antenna next to the speaker
Wi-fi + BT antenna on the left
Heaphone jack
Camera flash (not the camera)
Side buttons
Small magnet that holds the USB cover in place
3.I used my thumbnail to remove the screen and in the whole process left absolutely no scratches/dents on the case or screen. It wasnt too hard to do.
4.In the video, the maker talks about the screw thats under the usb door telling us to leave it in at first as it wouldn't come out, mine fell out straight away when i flipped the case so be careful! Don't lose it! Put it back in when you re-attach the screen.
5.I found taking out the top left part of the screen quite hard using my thumbnail, so i used a screwdriver to push out the metal ring under the usb door (the one in which the screw was in). It's kind of common sense when you see it.
6.I also found it a bit harder than described in the video to take out the metal battery cover after unscrewing 6 screws. Maybe i was being too careful but within two minutes i managed to find the right pressure point and it snapped out easily.
7.Be very careful unscrewing the screws. I almost messed it up on the top right out of the six that hold the metal cover. It was in very tight and i twisted the head a bit withought the actual screw moving and it started to look very bad. Solved it by using a larger T6 screwdriver. Others were fine with T5 just dont rush.
8.I didnt use a magnetic screwdriver and theres no need at all.
my second picture work done!
Nice work! Thanks for sharing
There is nothing wrong with my phone at all... but the white lumia is soooo nice....
Mega Maniac said:
There is nothing wrong with my phone at all... but the white lumia is soooo nice....
Click to expand...
Click to collapse
you're right) i changed mine only because i wanted a cyan since a had a cyan N9. And i must say that i have made the right choice! I actually ended up with better build quality than i had on the N9 even though i did the lumia myself (the screen fits tighter, nothing squeaks etc.)
about the white, i havent yet seen a white housing for sale anywhere.. Perhaps its too early because i havent noticed any other coloured housing covers until recently..on ebay at least.. Anyway if someone finds one share the link!
I was looking at the same seller on eBay. Been searching for a white housing as well no luck yet.
Sent from my Lumia 800 using XDA Windows Phone 7 App
frankieboyo said:
I was looking at the same seller on eBay. Been searching for a white housing as well no luck yet.
Sent from my Lumia 800 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
truth be told I was actually disappointed in how the white one looked when I saw it in phones4u yesterday. I think the white and the black are best suited for the minimalistic design of the n9. However I see cyan and magenta look cooler on the lumia even though before, I also thought the white would look awesome. That's just my opinion but I do advise you to go and check it out first
Mmm thanks might have a look first then.
Sent from my Lumia 800 using XDA Windows Phone 7 App
Is there any way to buy a housing in the US? The only one on eBay seems shady as it's listed as for an 800 but there's no camera button on the side.
http://www.ebay.com/itm/Blue-Origin...Cover-Faceplate-Nokia-Lumia-800-/280837607741
Sent from my Lumia 800 using Board Express
ShotSkydiver said:
Is there any way to buy a housing in the US? The only one on eBay seems shady as it's listed as for an 800 but there's no camera button on the side.
http://www.ebay.com/itm/Blue-Origin...Cover-Faceplate-Nokia-Lumia-800-/280837607741
Sent from my Lumia 800 using Board Express
Click to expand...
Click to collapse
That one definitely does not look OEM. Aside from the missing camera button, the flash is much closer to the lens few a few mm.
ShotSkydiver said:
Is there any way to buy a housing in the US? The only one on eBay seems shady as it's listed as for an 800 but there's no camera button on the side.
http://www.ebay.com/itm/Blue-Origin...Cover-Faceplate-Nokia-Lumia-800-/280837607741
Sent from my Lumia 800 using Board Express
Click to expand...
Click to collapse
Well the camera button can only be seen (or could) on the right one, but thats the housing for N9 look at the flash placement(two golden squares). The one on the right is supposed to be lumia's because the flash is in the right place but yes it's too close. Looks like this seller doesn't know what he's doing.
I dont know anything about US parts sorry. Does Headlane not ship to US? Or would that be too expensive?
Nah, you can see enough of the left item to see it's missing the shutter button.
Rusty! said:
Nah, you can see enough of the left item to see it's missing the shutter button.
Click to expand...
Click to collapse
either way the flash is in a different place on those two so they cant be the same case. so i would definitely not get whats on this picture. The seller might be selling actual parts just not know much aout them)
aslan93 said:
either way the flash is in a different place on those two so they cant be the same case. so i would definitely not get whats on this picture. The seller might be selling actual parts just not know much aout them)
Click to expand...
Click to collapse
Judging by the photo, it doesn't look like an OEM N9 nor Lumia 800. The N9 has the flash to the side of the lens and the Lumia 800 has the flash several mm above the lens. This is a cheap knock off.
The one on the right has the flash on the side of the lens, the one on the left doesn't.
It's just a mish-mash of crap
ok guys like i said before, the one on the right is the one for the N9, i have one and i know.. it also looks very legit (for the n9) at least it looks the same watch:
http://www.youtube.com/watch?v=mSJtUbnM46E
esp (2:33)
The one on the left is... i dont know wtf that is.. but the seller doesnt know what he is doing so i wouldnt buy from him.
Agreed. Looks dodgy. Headlane have there own eBay site and stock all the housings. Just emailed them asking when to expect the white to be stocked ;-)
Sent from my Lumia 800 using XDA Windows Phone 7 App
Ok just got a reply very quickly. Might have the white in a few weeks . £60 not too bad.
Sent from my Lumia 800 using XDA Windows Phone 7 App
aslan93 said:
Well the camera button can only be seen (or could) on the right one, but thats the housing for N9 look at the flash placement(two golden squares). The one on the right is supposed to be lumia's because the flash is in the right place but yes it's too close. Looks like this seller doesn't know what he's doing.
I dont know anything about US parts sorry. Does Headlane not ship to US? Or would that be too expensive?
Click to expand...
Click to collapse
Funnily enough, a week ago when I found this auction the pictures of the housing were clearly a Lumia 900, with the flash on the side. The pictures changed to what they are now a few days ago so.... definitely shady.
Yeah, the problem with Headlane is they don't ship to the US at all. They don't even come up in the search on the US site.
ShotSkydiver said:
Funnily enough, a week ago when I found this auction the pictures of the housing were clearly a Lumia 900, with the flash on the side. The pictures changed to what they are now a few days ago so.... definitely shady.
Yeah, the problem with Headlane is they don't ship to the US at all. They don't even come up in the search on the US site.
Click to expand...
Click to collapse
They may have been images of the N9 housing, which also has the flash on the side.
I have a very specific question with regards to replacing the charging port on the i777. I have searched threads discussing charging port replacement, but was unable to find anything about this specific issue. I am currently going through my first repair on my i777 that needs a new charging port. I bought the replacement on ebay, but something stood out once I compared it to the original charging port I took out. On the original there is a small rubber piece hanging down (around where the screw holes are). On the replacement piece it's just a metal piece hanging down in the same place. Do I need to have that rubber piece on the replacement charging port? Would it even affect the functionality of the phone? Is there a way to take the rubber piece off the original and transfer it to the replacement, or should I just buy one with the rubber piece on? If someone has asked this question already forgive me, but I did not see it in the thread I skimmed through.
Here is a pic of both them side by side. The top one is the original and the bottom is the replacement I got from ebay.
farm8.staticflickr (.com) /7281/9735538853_4e701482f8_o (.jpg)
It would not let me post link yet so just remove parentesis and spaces to view picture link.
That gray part is for waterproofing the microphone I believe. It just slides off of the old part and onto the new one, just be careful. Also if you have no signal, by now you may have already found the following thread. I had to do this a couple of weeks ago to get a signal: http://forum.xda-developers.com/showthread.php?t=1950114&page=5 I'll try harder to match up the part numbers next time!
iXNyNe, please let us know if the newegg part works, or if you end up needing to modify it (see link in above post), or purchase another.
iXNyNe said:
http://www.newegg.com/Product/Product.aspx?Item=9SIA2C51D87922 just ordered this. [...]
Click to expand...
Click to collapse
cyril279 said:
iXNyNe, please let us know if the newegg part works, or if you end up needing to modify it (see link in above post), or purchase another.
Click to expand...
Click to collapse
i'll report back once i have them
i already took the phone apart just to peek around inside, the part looks just like what's already there. the picture shows some teal/aqua colored tabs towards the bottom, im assuming these are peel off for an adhesive (there did seem to be an adhesive holding the part in place).
based on that link mentioned i would say that cutting is a little extreme, it looks like they cut the board in half, which is definitely NOT how it comes stock.
again i'll report back once i've got the chips. and for under $8 with free shipping i cant really complain even if they dont work out.
The only thing you're actually cutting (electronically) is the ground plane of the board shared by the antenna/radio and the charge port. In short, there's a super low risk of messing anything up, unless you use a sawzall to complete the job.
I assume that it was more cost effective for Samsung to put those items on the same board, but it's a punk move to attach a known replacement part to an antenna that varies by region. Either way, I'm glad to know that the hack is an option but I'd be happier to know that the hack isn't necessary.
iXNyNe said:
i'll report back once i have them
i already took the phone apart just to peek around inside, the part looks just like what's already there. the picture shows some teal/aqua colored tabs towards the bottom, im assuming these are peel off for an adhesive (there did seem to be an adhesive holding the part in place).
based on that link mentioned i would say that cutting is a little extreme, it looks like they cut the board in half, which is definitely NOT how it comes stock.
again i'll report back once i've got the chips. and for under $8 with free shipping i cant really complain even if they dont work out.
Click to expand...
Click to collapse
Just wanted to report success. The part from new egg worked and was really easy to swap.
I don't have the right size sim card anymore since switching my primary carry, so I can't test reception, but otherwise everything is working (charging, wifi, Bluetooth, etc)
P.s. I did not modify the item I received (no cutting) and it is a 2.3 where the original I removed was a 2.2. I've saved the 2.2 just in case something comes up.
Sent from my LG-D800 using Tapatalk
Thanks, but I'm afraid that we won't know whether the replacement part is a proper replacement until there is a sim-card involved. Reception is the rub (see post below from the board-mod thread).
underhuggare said:
[...]I also replaced the original rev 2.2 with rev 2.3 which fixed the usb port but gave me very unstable and poor reception. [...]
Click to expand...
Click to collapse
iXNyNe said:
Just wanted to report success. The part from new egg worked and was really easy to swap.
I don't have the right size sim card anymore since switching my primary carry, so I can't test reception, but otherwise everything is working (charging, wifi, Bluetooth, etc)
P.s. I did not modify the item I received (no cutting) and it is a 2.3 where the original I removed was a 2.2. I've saved the 2.2 just in case something comes up.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
cyril279 said:
Thanks, but I'm afraid that we won't know whether the replacement part is a proper replacement until there is a sim-card involved. Reception is the rub (see post below from the board-mod thread).
Click to expand...
Click to collapse
I'll see if I can find a friend with a full size Sim over the next few days and test the reliability. But honestly I'd have to it may be better for people to find a rev 2.2
But for anyone who no longer uses the phone for cell service, the new egg part works great for a cheap and easy charge port replacement.
Sent from my LG-D800 using Tapatalk