Small Chrome issue - Xperia Tablet Z Q&A, Help & Troubleshooting

Hey there!
This might sound blunt but did anyone figure out a way how copy an URL out of the Chrome URL-Bar? The XTZ will let me mark it if I click in it but there seems to be no way to just copy the URL... or am I missing something?
I checked on my GN and it works fine there btw.
Thanks
Gesendet von meinem SGP311 mit Tapatalk 2

Hold down on it after highlighting then select copy?

Sean09 said:
Hold down on it after highlighting then select copy?
Click to expand...
Click to collapse
Yeah I tried that but that would just make the highlighting disappear.
Gesendet von meinem SGP311 mit Tapatalk 2

mattforchi said:
Yeah I tried that but that would just make the highlighting disappear.
Gesendet von meinem SGP311 mit Tapatalk 2
Click to expand...
Click to collapse
If it disappears after you hit copy then maybe it worked?
But originally said you clicked it. Once you see ur, just hold down on it until you see copy icon come up
Post a screenshot of what it looks like after you hold down on it

SayWhat10 said:
If it disappears after you hit copy then maybe it worked?
Click to expand...
Click to collapse
No it doesn't work. You know I click in the URL bar once which highlights the whole URL. Then usually, at least on the Galaxy Nexus, I would have to long press the highlighted URL so that the dialog to either copy, cut etc. will appear. But this doesn't work on here as the long press would just make the highlight disappear and leave me with the cursor where I put my finger to long press the URL. I should mention that this just happens to be the case in the URL Bar of Chrome as on the websites themselves copying works just fine.
Has noone else experienced that on the XTZ?
Here are two screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And another two screenshots on how it works on my GN:
Gesendet von meinem SGP311 mit Tapatalk 2

Like I said, don't click it to highlight
When you first see the url just long press on it
Does this happen on all browsers?

don't single tap or long tap -- double tap. when you do, you'll get a Text Selection menu across the top of the screen - select all, cut, and copy, and done.

jglasgowla said:
don't single tap or long tap -- double tap. when you do, you'll get a Text Selection menu across the top of the screen - select all, cut, and copy, and done.
Click to expand...
Click to collapse
Thank you so much, that's exactly it!
It's kinda weird though, that they would handle copying URLs differently on the same browser on different devices.
Gesendet von meinem SGP311 mit Tapatalk 2

Related

How to clean up the ics clipboard?

is there a way to remove those screen capture in the clipboard?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9100 using XDA
DummyPLUG said:
is there a way to remove those screen capture in the clipboard?
View attachment 971351
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
does long press and then choose delete not work anymore!?
it works for text, but not for screen capture, a long press do not bring up anything.
Sent from my GT-I9100 using XDA
It seems that the thumbnails persist even after the captured images have been deleted from the Gallery. I wonder if a reboot will shift them (thinking as I type).
SGS2 ICS 4.0.3
---------- Post added at 04:55 PM ---------- Previous post was at 04:29 PM ----------
Nope.
Thumbnails are persisting on mine even after a Restart.
This is one for the experts, I think.
Clear thumpnails in gallery or delete thumpnails in your sd and do a media scan(open gallery) to rebuild thumpnails
Has anyone found a way to do this? Please help.
Thanks.
clear images/screenshots from ICS clipboard
Hello, I just registered to post that I am having this problem too.
I have a Samsung Galaxy S2, rooted, running ICS 4.0.3
Long press on the image doesn't work, nothing happens.
I have a solution.
1. Open Polaris Office.
2. Create a new Word document.
3. Scroll along the bottom until you see a clipboard icon.
4. Click it and you should see the images on the clipboard.
5. Long press for the delete dialog as normal.
I'm going out on a limb here and guessing that the reason it can't be deleted is because you are trying to delete it in a field that accepts only text for some reason.
I'm guessing if you can find a place that allows images to be pasted, the clipboard will let you delete them, such as it is with Polaris or possibly other similar apps.
Sent from my GT-I9100M using XDA
@ psyfyr
Excellent!
A fine solution to an annoying problem.
Thanks
Swyped in through Tapatalk 2
Thank you so much psyfyr! Very annoying to have those in the way!
no apps required i have done it in s duos may be it works on s 2 too
just open your messages
click on compose messege
go to enter text tab
click on clipboard option your keyboard
now you are able to select or delete the images

[MOD][2.3+] Remove "Downloaded Only" banner from Play Music (PMDOR)

Simple module this, removes the "Downloaded Only" bar from the top of Play Music, which can be annoying when you're offline and turn it on to avoid greyed out albums and unplayable songs
Doesn't remove the drawer option, so you can still turn it off there.
Screenshots:
Before:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After:
Download:
Download (30KB)
Xposed Repo
Source:
GitHub
This was from reddit wasn't it?
Sent from my SM-G900T using Tapatalk
aooga said:
This was from reddit wasn't it?
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Nope, it annoyed me so I made it
Sent from my Nexus 7 using Tapatalk
Quinny899 said:
Nope, it annoyed me so I made it
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Heh...http://www.reddit.com/r/xposed/comments/2bbxmc/request_hide_downloaded_only_tab_in_google_play/ Wasn't me, but I knew I saw it.
This no longer works on the latest version (5.8).
Updated for material version (sorry for the delay), I'm pretty sure it will still work on Android 2.3 but am not totally sure, if anyone can test that would be great
New icon too:
Didn't work in LG G2 with CyanogenMod 12
97carmine said:
Didn't work in LG G2 with CyanogenMod 12
Click to expand...
Click to collapse
Can you provide more info? Have you activated it in xposed?
Quinny899 said:
Can you provide more info? Have you activated it in xposed?
Click to expand...
Click to collapse
Yes
97carmine said:
Yes
View attachment 3176944 View attachment 3176945 View attachment 3176949
Click to expand...
Click to collapse
It doesn't remove that bar. It removes the banner you get when it's turned on.
Grey Bar on bottom of screen
Hey man, love your module! But there is one thing that is kind of annoying me, after turning on Download Only mode, a grey bar appears at the bottom of the screen, assumingly the same size as the removed "Download Only" banner. Don't know if this is replicated on every device but it is on mine.
Thank you for this fantastic module! I was just wondering if there are any plans to also remove the "Get Unlimited Music" banner that was added in the latest update. Thanks
MODEL: VS980 ?
ROM: LiquidSmooth ?
KRNL: B14CKB1RD ?
RCVRY: TWRP 2.8.4.0 ?
Hey man just a heads up that the update to GPM today broke your module, hope you can fix it. By far my most favorite module.
Yes, on the new version the text is removed but the bar still remains.
l_p_4_7 said:
Yes, on the new version the text is removed but the bar still remains.
Click to expand...
Click to collapse
I am aware, I'm waiting for my new SSD to arrive before I start development again
Any new progress?

Cards much too big

Hello, I have a ZenWatch 2 with watch faces by Watchmaker. Inside the app I set the cards to small, but many apps (Whatsapp and Tapatalk for sure) seem not to care about it and fill the whole screen in ambient mode. They pop up and screen brightness goes up.
Is there a way to restrict the access of the cards in ambiend mode? I do not want the whole world to read my messages.
Its in the setting for watchmaker.
Pic a face in watchmaker and go to that setting and look under cards and big cards
Sent from my LG-H812 using XDA Free mobile app
Nope, the settings are "for all watch faces" as stated inside the app and the "large cards" is deactivated. So that does not solve the problem.
I did even deactivate "show in ambient", but it does not work.
Does it work for you in ambient?
Der-Knuffi said:
Does it work for you in ambient?
Click to expand...
Click to collapse
Yes it does. Try stock watch faces. Maybe its a bug with watchmaker
Sent from my LG-H812 using XDA Free mobile app
OK, will try
Gesendet von meinem GT-I9505 mit Tapatalk
The notifications come through on stock faces, too.
Addition: It's only Whatsapp and Tapatalk.
Gesendet von meinem GT-I9505 mit Tapatalk
Hello. Its watchface maker. I tested both stock and watchface.
Stock looks normal.
Watchface maker looks big.
I contacted the makers of watchface to let them know
Sent from my LG-H812 using XDA Free mobile app
Not for me:
It's in ambient mode with all watch faces - Watchmaker and stock.
And it's not only Whatsapp and Tapatalk but also the notification test from android wear.
BTW: I find it very disturbing that the Zen Manager and Wear have quite similar or even same settings and if you change one of them it is not changed in the other app ...
Or the fakt that the "light up on turning the hand" has to be deactivated in watch and Zen Manager ... :/
First pick is stock watchface
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Second pic is watchface maker
Sent from my LG-H812 using XDA Free mobile app
I'm talking about ambient mode.
You can set the size of the cards in active mode inside the WatchMaker app generally for all WatchMaker watch faces. Look inside the "hamburger" menu under "settings" and "cards". I set it to small and when the screen is active I get small notifications. But when im AMBIENT mode no matter which watch face, the screen lights up and the notifications is full screen.

What for Xposed Modules you are using?

i'm using:
AdBlocker
FlatStyleBar Indicator (payed)
ChromePie
G4 Tweakbox
GravityBox
HideEmergency Button
SkyolinHelper <- you can add Multiwindow and change DPI per App
Ultimate Whatsapp Theme Engine
Xtana
I'd also be interested to hear what people are using (and why - what it brings that stock doesn't).
I've not unlocked yet but phone seems pretty stable so I'm planning on doing it soon just to get Xposed.
i am using following modules:
AdBlocker (blocks in-app ads)
Amplify (extends standby-time)
G4 TweaksBox (Collection of LG G4 tweaks, many working on g5)
GravityBox [MM] (UI-Tweak-Collection - i really missed statusbar brightness slider)
UnbelovedHosts (webbrowsing adblocker [blocks by hostname])
For Xposed installer:
Xposed by dvdandroid
Modules:
ActivityForceNewTask
Adblocker
CPUTemp
CrappaLinks
GravityBox
Lucky Patcher
XposedAlwaysCorrect
Youtube AdAway
Youtube Backgraound Playback
YoutTube notification seek bar
YoutubeSwipeToSeek
Zoom For Instagram
Birbou said:
[*]Youtube AdAway
Click to expand...
Click to collapse
Does this get rid of the annoying ads over the video or trailer style ads you have to sit through?
gurningchimp said:
Does this get rid of the annoying ads over the video or trailer style ads you have to sit through?
Click to expand...
Click to collapse
Exactly!! ??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my Xposed set up at the moment
@ op
why not convert this thread into a list with working modules description?
Oh and i'm also using ubicon pro (lets me use icon themes)
Fingerprint Enabler - Use fingerprint after turning your device on (no need to enter pin/password/pattern)
ORIGINAL FORUM
I dont know about you but i am able to unlock with fingerprint even when the screen is on (asking for knock-code)
What exactly does this change?
Gesendet von meinem LG-H850 mit Tapatalk
nchantmnt said:
I dont know about you but i am able to unlock with fingerprint even when the screen is on (asking for knock-code)
What exactly does this change?
Gesendet von meinem LG-H850 mit Tapatalk
Click to expand...
Click to collapse
When the phone turns on (after being off) you no longer need to enter a passcode before using fingerprint
nchantmnt said:
I dont know about you but i am able to unlock with fingerprint even when the screen is on (asking for knock-code)
What exactly does this change?
Gesendet von meinem LG-H850 mit Tapatalk
Click to expand...
Click to collapse
It does exactly what he said. whenever you reboot your phone, the phone require you to put in the pin in order to unlock it for the first time. This module overrides that and let you use your fingerprint instead(worked for me). And also lets you use fingerprint if the screen is locked by 3rd party software(never tried this)
Ah nice, thanks will try that
Gesendet von meinem LG-H850 mit Tapatalk
right now i uses:
-amplify
-fingerprintenabler
-g4tweaksbox
-gravitybox
-greenify
-installeropt
-playstore changelog
-powernap
Delete
When you first power on the phone you have to enter the pin. This makes it so even on a restart or power on you can unlock with your fingerprint.
I have g5 f700l korean version. still no support for root, xposed .

How do you take a screenshot?

I've tried power button and either of the vol keys and nothing.
ok, figured it out - just use the Screen Write function using the s-pen
WastedJoker said:
ok, figured it out - just use the Screen Write function using the s-pen
Click to expand...
Click to collapse
Or use sidebutton and volume down simultaneously. Or use the side of your hand and wipe from left to right.
Verstuurd vanaf mijn SM-T865 met Tapatalk
sidebutton?
I can never get palm swipe gesture to work
WastedJoker said:
sidebutton?
I can never get palm swipe gesture to work
Click to expand...
Click to collapse
The Bixby button. On top off of the volume keys.
For me the gesture works. Just hold your hand if you would shake somebody's hand. And then swipe across the screen from left to right. Works for me everytime.
Verstuurd vanaf mijn SM-T865 met Tapatalk
Press the power button and the volume down button together for about 1 second and then release the buttons EVEN IF YOU DO NOT SEE the white flash confirming the screenshot. Only AFTER you release the buttons do you see the white flash. This works differently from previous versions of Galaxy Tabs, and it can be quite deceptive.
Of course, you can also use the S-Pen and the palm swipe action to take screenshots as mentioned in the other posts.
Same way on the Note 10+. It's hard to get used to, as holding down the volume down button and power button now brings up the power menu. I have to retrain my brain to just press them both down at the same time and release.
Its a quick press of volume down and power at same time. No need to hold them down for a 1 sec or anything..just push let go[emoji16]
Sent from my SM-N975U1 using Tapatalk
WastedJoker said:
I've tried power button and either of the vol keys and nothing.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've installed "Good Lock" (NiceLock) with the module "NiceShot" and "NavStar"

Categories

Resources