Hello all,
I wanted to change the pixel density of my Xperia Tablet Z (SGP311), so I rooted it using a script by Bin4ry. It worked fine. Then I used an app, which I forgot the name of, to change the pixel density. Upon rebooting the device, I noticed that it didn't proceed past the Sony logo screen, and kept rebooting over.
I have tried pushing up + power buttons, but the same thing keeps happening. When I plug in the charger, the battery display does pop up.
I can also get it to go into fastboot mode (led turns blue). But without anything showing up on the screen.
flashtool recognizes the device.
That's all the info I could think of. So, could I ask anyone for any suggestions?
Best,
d.
ozyildizz said:
Hello all,
I wanted to change the pixel density of my Xperia Tablet Z (SGP311), so I rooted it using a script by Bin4ry. It worked fine. Then I used an app, which I forgot the name of, to change the pixel density. Upon rebooting the device, I noticed that it didn't proceed past the Sony logo screen, and kept rebooting over.
I have tried pushing up + power buttons, but the same thing keeps happening. When I plug in the charger, the battery display does pop up.
I can also get it to go into fastboot mode (led turns blue). But without anything showing up on the screen.
flashtool recognizes the device.
That's all the info I could think of. So, could I ask anyone for any suggestions?
Best,
d.
Click to expand...
Click to collapse
if you tried to put it into phone UI mode... it won´t boot anymore because you can´t change a SONY Rom into Phone mode.
You have to use adb and pull the file "build.prop" and change it back to normal or if you can´t use adb you´ll have to reflash your tablet with flashtool/EMMA or if bootloader is still locked SEUS/PC Companion
om22 said:
if you tried to put it into phone UI mode... it won´t boot anymore because you can´t change a SONY Rom into Phone mode.
You have to use adb and pull the file "build.prop" and change it back to normal or if you can´t use adb you´ll have to reflash your tablet with flashtool/EMMA or if bootloader is still locked SEUS/PC Companion
Click to expand...
Click to collapse
Thank you om22 for suggesting EMMA. Flashtool wasn't working for me, but I finally managed to revert back to stock and everything seems to be in order.
Related
SOLVED
______________________________________________
first for jumping out of flash mode, i used pc companion's repair, even though it didn't worked, but at least it kept my phone in the flashing mode
second, after the failure of pc companion, i opened flashtool and flashed a 1.6 one onto it.
third, my phone was running again!!
______________________________________________
hey guys,
i have bricked my phone
i have tried the solutions here, but none helped:
* seus said: the phone has already the latest version installed
* repairing said: there is no software available for your phone yet
* sometimes the going into flash mode doesn't work, it simply jumps out of it, but by pressing some buttons, it remains in there
[edit: now i can't make it to stay in flashing mode anymore]
* the combination back+home+power does not have any effect
* flashtool reaches to the end and says
29/044/2011 17:44:36 - INFO - Now unplug the device and power it on
29/044/2011 17:44:36 - INFO - Then go to application settings
29/044/2011 17:44:36 - INFO - turn on Unknown Sources and Debugging
though nothing happens afterwards (and by nothing i mean it still remains at the SE TEXT, not logo).
NOTE: I rooted my xperia before using flashtool, but i couldn't install recovery, and even when i was installing root with SuperOneClick, everything was smooth and said success except the test which failed.
PS: if i use a generic ROM, would that help? i flash this firmware with flashtool:
Generic 2.0.2.A.0.24[rooted]X10 Mini Pro (U20i)
You flashed with xrecovery ? Can you access it and fix permissions ?
wiilweer said:
You flashed with xrecovery ? Can you access it and fix permissions ?
Click to expand...
Click to collapse
yes, the rom had xrecovery, but holding on back and power doesn't lead to the xrecovery, the text still shows up, though it has a delay and the grean light blinks once
I´m dealing with the same issue. xrecovery was installed but I can´t even access it because the cell phone hangs on Sony Ericsson logo screen.
still unsolved. cant use usb- wont connect. green blink and thats all. logo hangs up all the time.
Ok, i've been using TripNMiui for quite some time now, and without any issues.
Sooner today i've installed Laucher 7, just to see how it would run alongside Miui and things worked out for a bit but then my system just got bezerk. My phone just loops and the message "The system process is not responding" appears.
Can´t change my Laucher anymore...in fact can´t do anything with the phone.
There is anyway I can fix it? Even if i need to lost my root and install a stock system again. Maybe putting it in DFU mode or something...
zackwire said:
Ok, i've been using TripNMiui for quite some time now, and without any issues.
Sooner today i've installed Laucher 7, just to see how it would run alongside Miui and things worked out for a bit but then my system just got bezerk. My phone just loops and the message "The system process is not responding" appears.
Can´t change my Laucher anymore...in fact can´t do anything with the phone.
There is anyway I can fix it? Even if i need to lost my root and install a stock system again. Maybe putting it in DFU mode or something...
Click to expand...
Click to collapse
You need to have adb set up in your PC.
Boot into xRecovery, connect your phone to the PC, open a terminal and type:
adb shell rm /data/app/info.tikuwarez.launcher3.apk
Then reboot your phone and the app should be uninstalled!
that´s the problem...i just forgot to tell that, somehow, can´t start xrecovery on the boot.
been trying to restart it in recovery mode or something, but neither SE PC Companion detects it neither Super One Click.
But thanks for the quick reply.
If you have any other idea, i´ll be pleased.
zackwire said:
that´s the problem...i just forgot to tell that, somehow, can´t start xrecovery on the boot.
been trying to restart it in recovery mode or something, but neither SE PC Companion detects it neither Super One Click.
But thanks for the quick reply.
If you have any other idea, i´ll be pleased.
Click to expand...
Click to collapse
Hmmm... xRecovery has nothing to do with PC Companion or Super One Click.
Try this:
Remove the battery from the phone for like 5 seconds.
Then insert it again and press the power button.
Immediately after the Sony Ericsson appears start pressing the Back button repeatedly.
After a few seconds, you'll be in xRecovery and you'll be able to follow the solution in my previous post.
If not, I'm afraid you need to flash a stock firmware with Flashtool or repair with SEUS.
Xperia X10i via Tapatalk
that's what i did...my xrecovery maybe got messed up cus i tried several times to do the restart/back button trick and nothing.
well, fresh start. at least it's all working now.
thanks anyway!
Hello there i need some help this is what happened.
I had this phone with purple screen so i download the room and flash it tru the sd card with the method of the buttoms (voluime up+ volumne - and power) the phone start doing the proces finish but never boot up it stay on a black screen.
After a while checking what when wrong i find out that i flashed a wrong firmware i used y210-0100 when i had to use y210-0151, so i download the new sofware and tried again but this time the phone does not go in to the flash mode wiith the botom (or any other mode)at least does not show nothing on the screen.
Right now the phone vibrates when i turn it on but does not show nothing on the screen only a black screen adb system in the computer recognize the phone but only when i conected in recovery mode (but nothing shows in the screen).
I have tried to flash it again with adb but nothing has work yet even thought to flash it tru the sdcard with adb but nohting has work yet, actually i am not an expert with the adb thing maybe you can recomend some comands that may work.
When i trien comands like "fasrboot -w" adb says waitng for device and get stuck there forever also with "fasboot flash file" or something likes that
So i will like to know if some one has any suggestion please let me know it may help me to fix this problem.
Y210-0100 Black Screen
Same thing happen to me after upgrading. HELP!!!
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
Unbalanced said:
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
Click to expand...
Click to collapse
Do this
Put the phone in fastboot mode>Install recovery again from the command prompt
After recovery is flashed try installing carbon rom
Do this
Put the phone in fastboot mode>Install recovery again from the command prompt
After recovery is flashed try installing carbon rom
Click to expand...
Click to collapse
How do I get into fastboot mode?
The phone connects in flash mode or not at all...
Unbalanced said:
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
Click to expand...
Click to collapse
flash ur device specific firmware. via flash tool
DastanShaikh said:
flash ur device specific firmware. via flash tool
Click to expand...
Click to collapse
I did try this but can't find a reliable download.
The link posted in XDA forums (http://forum.xda-developers.com/showthread.php?t=2759934) takes me to MegaUpload and for some reason the download always stalls at 44% (I've tried 3 times).
Just soft brick!!!
Just search for ftf and flashtool anywhere in internet
Xperia™ Z (C6602) with Tapatalk
Unbalanced said:
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
Click to expand...
Click to collapse
You're on the wrong forum mate, for the z2 go here:
http://forum.xda-developers.com/xperia-z2
Please don't try to flash any .ftf file you downloaded from the xperia z forum, as this would hard brick your phone. Search for it in the link I posted.
Good luck
St.Jimmy90 said:
You're on the wrong forum mate, for the z2 go here:
http://forum.xda-developers.com/xperia-z2
Please don't try to flash any .ftf file you downloaded from the xperia z forum, as this would hard brick your phone. Search for it in the link I posted.
Good luck
Click to expand...
Click to collapse
You're quite right. My apologies, I'm not even sure how I ended up in this section...
Unbalanced said:
How do I get into fastboot mode?
The phone connects in flash mode or not at all...
Click to expand...
Click to collapse
hold up volume key and connect usb the led will be blue
androidtweaker1 said:
hold up volume key and connect usb the led will be blue
Click to expand...
Click to collapse
This connects the phone in flash mode for me.
Unbalanced said:
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
Click to expand...
Click to collapse
flash ur phone with emma tool it will work...it will automatically detect and update ur phone
androidtweaker1 said:
hold up volume key and connect usb the led will be blue
Click to expand...
Click to collapse
Check this
Suresh9488 said:
flash ur phone with emma tool it will work...it will automatically detect and update ur phone
Click to expand...
Click to collapse
I'm very pleased to say that this worked. Thanks!
Now, I think I might just persevere with the stock ROM for now and enjoy my new phone.
Thanks again to everyone who helped.
Unbalanced said:
I'm very pleased to say that this worked. Thanks!
Now, I think I might just persevere with the stock ROM for now and enjoy my new phone.
Thanks again to everyone who helped.
Click to expand...
Click to collapse
well then enjoy.
Helloooo,
I have a big problem, cant get my phone running again.
The sad thing is, I just got it 4 hours ago
So heres what I have done to my Phone:
I rooted it with Kingo-Root and then installed a app where TWRP was listed, there also was CWM and stuff and I thought I have to flash my phone there with TWRP to install a new ROM and stuff and I clicked there on flash.
Then it asked me if I want to restart in, I cant remember recovery and/or download mode, I clicked yes and from there the trouble began.
When it starts the Coolpad Logo appears, then it say "Download and install the package?", to confirm volume up, to abort volume down. If I press abort, it just goes off, the restart may leads to the battery charging screen ( usb cable is always connected!!), if I press volume up, it says "Information - Do not disconnect data cable", but it says it for forever, nothing happens.
If data cable isnt connected, it shows Logo and then goes off, doesnt do anything.
I wish I would have never done that, Im too stupid for stuff like that.
Can someone help me out?
Hopefully
Hi are you able to enter in TWRP recovery in orden to try to flash him back to stock rom ?
Sadly no
I read some stuff on the internet, and tried it:
I installed andoid studio on my PC, with all that drivers, connected the Phone to my PC and looked it up in the device manager.
Before it was just recognized as "Other devices - Android" without any information, now I had the Hardware ID and put that into the setup text of Google drivers and installed them.
My PC somekind recognizes the phone. (but not like normally)
Maybe i can get the Stock Rom to phone that way somehow?
Edit: its called adb interface in device manager
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
bad support.
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
Bad support for this phone...
My is dead after 20 days .
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
That is probably because you flash incompatible firmware which does not recognize display of your device .
Search on the internet for another genuine rom and repeat flashing process .
I had alsmost same issue when I flashed Blu Studio D572i with rom of D572a as I remember , was black screan completely but buttons are working (showing light) .