There is a problem in my Galaxy S3, when I call someone, there is no sound in call and the people in the other site also can't hear my voice. I had checked my speaker and my microphone, they are working. This problem is really annoying, is there anyone can solve this problem? I will very appreciate about that, thanks.
man,
to eliminate doubts about if there is a hardware or software problem, flash a stock or pre-stock rom, full wipe, etc ... test It.
always make a backup
good luck,
best regards
no info whatsoever. what phone model? what ROM? what kernel?
I had tried flash stock rom and wipe data and cache, but still no luck... My phone model is XXEMA2, csc version is OLBEMA1, android version 4.1.2, stock rom and stock kernel. Thanks for the replies
http://forum.xda-developers.com/showthread.php?t=1826167&highlight=no+sound+in+call
http://forum.xda-developers.com/showthread.php?t=2237424&highlight=no+sound+in+call
http://forum.xda-developers.com/showthread.php?t=2135907&highlight=no+sound+in+call
doesn't work after factory reset on stock ROM - send it to service
Try connecting earphones to it and see whether your hardware is faulty or software.
Based on that, u can give an excuse at the service centre
Sent from my GT-I9300 using Tapatalk 4
Related
Ok so i am noob with Samsung and dealing with flashing and all these stuff, i just switched from iPhone to Galaxy S3 GT-I9300, i have read so many posts and watched so many videos, all what i want is some clarification
1* I have managed to download CM 9.0.0 for my phone and installed it through ROM Manager , i have noticed that my Data service is not working, am living in Kuwait "Middle East" the wifi is working fine no issues and i enabled the Data Service through the settings, how can i fix the issues with the data plan although it is working fine after i restored to my stock ROM
2*Can u tell me what the use of the Odin except rooting and installing a stock Firmware ?
3* correct me if i am wrong but the ROM will only do some sort of interface for the phone , as we say in IT "GUI" of course not to forget to mention the speed and tweaks for hardware of the device it self, i mean it is not a complete OS "Firmware" mostly GUI with Tweaks.
4*While doing the installation of the ROM and remove it and getting back to my stock ROM , nothing from my data has been changed, does that means every time i install any ROM and get back to the old one my data will not be effected on the stock ROM?
5* what would happen if i tried to install a ROM not compatible with the firmware i have ? and how would i fix that ?
6*How can i tell if the ROM is compatible with the firmware i have? , for example in my case i downloaded CM 9.0.0 for my S3 which has 4.0.4 firmware
7* I have understand that the ROM must be compatible with my phone version , what i mean with version like International version or US carriers versions, am i Right?
Am sorry asking too many questions,I tried my best to make the questions with yes or no answer, and incase you would like to write more please do
answering me those questions will help me alot, i have been reading so many posts and it is making me go insane
Thanks so much in advance :angel:
nowaar said:
Ok so i am noob with Samsung and dealing with flashing and all these stuff, i just switched from iPhone to Galaxy S3 GT-I9300, i have read so many posts and watched so many videos, all what i want is some clarification
1* I have managed to download CM 9.0.0 for my phone and installed it through ROM Manager , i have noticed that my Data service is not working, am living in Kuwait "Middle East" the wifi is working fine no issues and i enabled the Data Service through the settings, how can i fix the issues with the data plan although it is working fine after i restored to my stock ROM
2*Can u tell me what the use of the Odin except rooting and installing a stock Firmware ?
3* correct me if i am wrong but the ROM will only do some sort of interface for the phone , as we say in IT "GUI" of course not to forget to mention the speed and tweaks for hardware of the device it self, i mean it is not a complete OS "Firmware" mostly GUI with Tweaks.
4*While doing the installation of the ROM and remove it and getting back to my stock ROM , nothing from my data has been changed, does that means every time i install any ROM and get back to the old one my data will not be effected on the stock ROM?
5* what would happen if i tried to install a ROM not compatible with the firmware i have ? and how would i fix that ?
6*How can i tell if the ROM is compatible with the firmware i have? , for example in my case i downloaded CM 9.0.0 for my S3 which has 4.0.4 firmware
7* I have understand that the ROM must be compatible with my phone version , what i mean with version like International version or US carriers versions, am i Right?
Am sorry asking too many questions,I tried my best to make the questions with yes or no answer, and incase you would like to write more please do
answering me those questions will help me alot, i have been reading so many posts and it is making me go insane
Thanks so much in advance :angel:
Click to expand...
Click to collapse
1. try reboot
2 thats about all its for
3............
4 all your data will be there unles you do a full wipe in recovery which is recomended before installing any ROM.
5 A ROM isnt specific to your firmware.If you have an international version which is GT I9300 Or GT I9300T any ROM from the I9300 threads will work. Dont flash anything made for the non international versions
Sent from my GT-I9300 using xda premium
Tried reboot didnt work to activate the data service,
Just to note i didnt do a full wipe and second i didnt install the gapps...
Is there anyway to fix this ?
Sent from my GT-I9300 using xda app-developers app
nowaar said:
Tried reboot didnt work to activate the data service,
Just to note i didnt do a full wipe and second i didnt install the gapps...
Is there anyway to fix this ?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
You do a full wipe. A full wipe is always recommended to prevent some weird bugs.
Sent from my GT-I9300 using xda app-developers app
nowaar said:
Tried reboot didnt work to activate the data service,
Just to note i didnt do a full wipe and second i didnt install the gapps...
Is there anyway to fix this ?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Full wipe
install again the rom
install gapps
then watch if data is working
If yes enjoy
if not install roma manager and try to install different modem.
repeat until u find a modem working for your network
If work enjoy
if not try to install CM10 Experimental
...
....
.....
enjoy
I have a strange issue with my camera after upgrading to JB.
Any app I am using, including stock camera app, which used the camera, after starting the app, the mobile strating to vibrate and a strange sound come from the camera. Like a buzz.
After shaking the mobile, the vibration and sound it's stop.
During the vibration time, the mobile come hot very fast, and, one time, the batery go over 70 degree (A message come on screen and mobile shout down).
I been trying diferent JB update, rooted and unrooted, but no success to solve the issue.
Any advice?
Thanks a lot.
Sent from my GT-N8000
oooohhh boy you really wanna reflash that ROM.
And wipe it all out while you at it.
Sent from the little guy
I been trying a fresh install also, cleaning the cach and factory format.
No luck!
Sent from my GT-I9100 using xda premium
you can try flash new stock rom by odin, then root and flash rom cook
No luck to any of the rooms, even original, even cooked.
Can be a hardware issue?
I did not had before this issue, only after updating to JB 4.1.x.
I tried to go also back to 4.0.x.
Same issue.
Sent from my GT-N8000
Did anyone have the link to a original rom where I can format in ODIN the sdcard during installation?
Sent from my GT-N8000
camera buzzing
im using i9100g. Not root.
i had same issue with u about the camera after upgrade to original firmware jelly bean i9100gddsl3 from india. when open the camera apps, there buzzing sound. after it focus the buzzing sound gone.
is this hardware problems?
or its just a camera firmware problem?
have u already found the solution?
Cam FW Ver : VCFA01
Phone FW Ver : TBEC28
PDA : i9100GDDLS3
PHONE : i9100GDDLS3
CSC i9100GoDDLS3
Hi,
I just flashed my GS2 9100 to Supernexus 4.2.2 Build 3. I'm enjoying this rom quite a bit. However, I'm having a problem with my bluetooth headset not having sound when i am in a call.
My headset is a blueant q2 with the lastest firmware (1.1). I have no problem pairing them, and I can hear sounds from the phone through the headset (such as vol up/down), but as soon as a call connects, there is no sound at all.
Can anyone help me? Much appreciated!
Thanks~
It looks like a glitch a dev will have to patch in the phone app. Can you hear the call when you put your phone up to your ear while the headset is paired?
s_ninja said:
Hi,
I just flashed my GS2 9100 to Supernexus 4.2.2 Build 3. I'm enjoying this rom quite a bit. However, I'm having a problem with my bluetooth headset not having sound when i am in a call.
My headset is a blueant q2 with the lastest firmware (1.1). I have no problem pairing them, and I can hear sounds from the phone through the headset (such as vol up/down), but as soon as a call connects, there is no sound at all.
Can anyone help me? Much appreciated!
Thanks~
Click to expand...
Click to collapse
Hi i'm also using that ROM,i don t know if it's the same thing but i have not that problem pairing my device with my Ford fiesta bluetooth sound system because everything works well, so i think the problem is on your bluetooth headset,
Bye
Hi,
Thanks for replying.
I cannot hear anything from the phone or headset during a call.
It's weird bc it seems to work properly when I'm not in a call...
Sent from my GT-I9100 using xda app-developers app
Update:
I paired the phone to my car (VW Golf 2013), and also had the same issue.
I'm wondering what handles bluetooth? if it is an issue with the rom / kernel or modem.
Just to clarify, I was previously running the latest themed version of Neatrom and had no issues with bt.
Thanks for any help!
Sent from my GT-I9100 using xda app-developers app
plants amerfo
s_ninja;3815922toUpdate:
I paired the phone to my car (VW Golf 2013) said:
Very very strange try to re flash the ROM whit a clean installation because i repeat,no problem with my car and any other devices,i can send and receive calls pairing my phone with bluethoot devices,everything works fine.
Click to expand...
Click to collapse
Thanks for your help killthedroid. I'll try to re download and re flash.
may I ask, what kernel and modem are you running?
Thanks.
Sent from my GT-I9100 using xda app-developers app
update 2:
I have tried reflashing the rom, but to no avail...
I have verified that it is not the modem (i flashed the latest NeatRom with the same modem, and no bt problems)
I have also tried:
1. Siyah_kernel_v5_MCM-i9100-vsync
2. re-downloading the rom and kernel from different mirrors and resflashing
2. Running hawkerpaul's GS2ROMNuke script and then reflashing the Rom
I have run out of ideas... Unfortunately i cannot post this directly to the supernexus forums, as i do not have enough posts...
It's too bad, because I really love the idea of the stock android experience on my s2. :crying:
It's back to neat rom for me. (for now?)
s_ninja said:
update 2:
I have tried reflashing the rom, but to no avail...
I have verified that it is not the modem (i flashed the latest NeatRom with the same modem, and no bt problems)
I have also tried:
1. Siyah_kernel_v5_MCM-i9100-vsync
2. re-downloading the rom and kernel from different mirrors and resflashing
2. Running hawkerpaul's GS2ROMNuke script and then reflashing the Rom
I have run out of ideas... Unfortunately i cannot post this directly to the supernexus forums, as i do not have enough posts...
It's too bad, because I really love the idea of the stock android experience on my s2. :crying:
It's back to neat rom for me. (for now?)
Click to expand...
Click to collapse
I'm very sorry for you but as i just told before it's strange, my i9100 is working like a gnex,everything works good, i'm on supernexus 2.0 build 3 with its original kernel,try to send a private message to the dev,and hope he reply.
SOLVED
killthedroid said:
I'm very sorry for you but as i just told before it's strange, my i9100 is working like a gnex,everything works good, i'm on supernexus 2.0 build 3 with its original kernel,try to send a private message to the dev,and hope he reply.
Click to expand...
Click to collapse
update:
After trying a variety of different options including (wiping my entire phone: cache, dalvik, data, system and internal storage).
It turns out it was indeed the modem after all. After flashing (LS8) the issue was resolved. I had no idea that the modem and rom would have such specific incompatibilities (since it worked fine on NeatROM, bluetooth and all)
To other Canadian users who may be experiencing similar issues:
The Bell Canada modem for jb (UGMA5) is incompatible with Supernexus 2.0 build 3. Trying to use it results in any calls taken on bluetooth being muted for the duration of the call. You will not be able to hear or speak to your contact. Instead use a different international modem. I am using LS8.
s_ninja said:
update:
After trying a variety of different options including (wiping my entire phone: cache, dalvik, data, system and internal storage).
It turns out it was indeed the modem after all. After flashing (LS8) the issue was resolved. I had no idea that the modem and rom would have such specific incompatibilities (since it worked fine on NeatROM, bluetooth and all)
To other Canadian users who may be experiencing similar issues:
The Bell Canada modem for jb (UGMA5) is incompatible with Supernexus 2.0 build 3. Trying to use it results in any calls taken on bluetooth being muted for the duration of the call. You will not be able to hear or speak to your contact. Instead use a different international modem. I am using LS8.
Click to expand...
Click to collapse
Hi I am in the same boat with a i9100 from Bell. Tried running cm10.1 and newest build of AKOP both with 4.2.2 and flashing/wiping all the partitions but still no bluetooth working in my car yet the A2DP works just fine. Could you give a heads up where to get the LS8 modem software?
theadvenger said:
Could you give a heads up where to get the LS8 modem software?
Click to expand...
Click to collapse
Check this thread and click on the link for Veykas modem collection:
http://forum.xda-developers.com/showthread.php?t=1131950
"To err is human, to forgive is divine"
Sent from my SGS II
Hi, Sorry I am new with this. I am also having the same issue with bluetooth device, I can't hear anything during a call. I actually upgraded to 4.2.2 AOKP. I have I9100M (in canada). I am wondering how can I choose the modem that's right for this phone. Also, how do I know which one is the one used by this phone just in case if something goes terribly wrong, I can revert back.
What does this modem do? I remember in the old days modem is to translate digital data over a transmission medium, is this the same in this case?
Thanks,
Ti.
Hi, since three days i having this problem.
The speakerphone switches off during calls unexpectedly! On Skype during videocalls i have the same problem and the audio switches to the frontal ear.
The configuration is in signature with last official Jelly Bean version (4.1.2).
Can you help me?
Thank you for your attention.
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
factory reset
R: Speakerphone turns off during the calls.
Glebun said:
factory reset
Click to expand...
Click to collapse
nooooooooo!
Is there another solution less tragic?
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
not with the information you provided, much and much more is needed to figure out the exact source of the issue. so we can't do anything other than suggest a factory reset
R: Speakerphone turns off during the calls.
Glebun said:
not with the information you provided, much and much more is needed to figure out the exact source of the issue. so we can't do anything other than suggest a factory reset
Click to expand...
Click to collapse
thanks! !!
Which informations? I can give you.
I have rooted phone and i have many apps installed into phone.
I have the issue since about one week and about three weeks ago i installed last version of official JB.
I have configured everything on my phone and when i think the factory reset i feel like crying...
How can i restore my configuration after hard reset?
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
R: Speakerphone turns off during the calls.
Glebun said:
not with the information you provided, much and much more is needed to figure out the exact source of the issue. so we can't do anything other than suggest a factory reset
Click to expand...
Click to collapse
I made a wipe data/factory reset and i restored apps and data by Titanium but i still have the same issues...
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
Are you using a custom kernel?
R: Speakerphone turns off during the calls.
No, i'm using all stock..
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
R: Speakerphone turns off during the calls.
I want to give you some detail to fix the issue.
When i use Skype and f.e. contemporaneously i use Navigator or YouTube that use rear speaker more frequently the audio signal switch to the frontal ear. ..
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
R: Speakerphone turns off during the calls.
I still have the issue despite i have just installed last stock no brand firmware "Ema2"...
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
Looks like I have the exact same issue with my i9300 Omega 43 custom rom
R: Speakerphone turns off during the calls.
agarp said:
Looks like I have the exact same issue with my i9300 Omega 43 custom rom
Click to expand...
Click to collapse
The issue on Skype i have partially solved using a mod of Skype that has advanced settings to switch speaker on/off without close and remake the calls...
Did you format your internal sd when you done factory reset?
I didn't it..
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
umby75 said:
The issue on Skype i have partially solved using a mod of Skype that has advanced settings to switch speaker on/off without close and remake the calls...
Did you format your internal sd when you done factory reset?
I didn't it..
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
Click to expand...
Click to collapse
I didnt have the above mentioned issue before, so I reckon its a issue particular build. I have updated my rom to the latest one, but didnt get a chance to test the issue.
No, I didnt format my sd card and I dont want to format also
R: Speakerphone turns off during the calls.
agarp said:
I didnt have the above mentioned issue before, so I reckon its a issue particular build. I have updated my rom to the latest one, but didnt get a chance to test the issue.
No, I didnt format my sd card and I dont want to format also
Click to expand...
Click to collapse
Do you mean that could be a particular hardware issue?
With my latest one stock rom updating i cannot fix the issue. I think seriously to format the internal sd to cancel any data that go in conflict with O.S...
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
I've got the same issue... I tried Revolt ROM one week ago and did not encounter any problems until I had to restart the phone (for adaway), then suddenly my speaker was not working properly and I could not make phone calls anymore, the other one on the line could hear me just fine, but I could not hear talking or the ringing sounds or anything else...
I thought it was because of the ROM and tried AOPK next, but had the same issue after a reboot of the phone. Next ROM I tried was Vanilla Rootboox (also AOPK ROM) and I started to wonder if maybe this was a AOPK-related problem, so I installed a CM10 nightly build, which had the same problems...
I tried formatting system and sdcard (internal) while flashing new ROMS, but to no avail, the issue remains...
Any suggestions? It would be much appreciated...
R: Speakerphone turns off during the calls.
I have tried to disable Adaway and restart the phone but i still have the issue...
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
umby75 said:
Do you mean that could be a particular hardware issue?
With my latest one stock rom updating i cannot fix the issue. I think seriously to format the internal sd to cancel any data that go in conflict with O.S...
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
Click to expand...
Click to collapse
I dont think its a hardware issue. Have you tried installing latest JB rom instead of your current rom.
R: Speakerphone turns off during the calls.
agarp said:
I dont think its a hardware issue. Have you tried installing latest JB rom instead of your current rom.
Click to expand...
Click to collapse
I' m sorry, but i have latest Jb Rom "Ema2". I never installed custom roms..
Sent from rooted Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
i also heard that people with boeffla kernel 2.8 was having that issue. they resolved by changing the kernel
R: Speakerphone turns off during the calls.
I have news and i can confirm there is an app responsible to get us this issue.
I have restored factory settings and re-installed the lastest official firmware (toggling the root permits too because i thought the root permits could be the cause) and i could call with speakerphone fine (i tested for over 50 minutes of phoned); then i have installed Skype and some other app and i could talk with speakerphone fine through Skype and Phone...
When i have just installed remaining apps i have noticed our fastidious issue...
Anyway I have unfortunately known that it's a widespread issue..
Sent from Int. Galaxy S3 with stock JB using Tapatalk - Rome, Italy
Hi guys, I have a problem with the audio during call.. I have custom rom 4.2.2 (pardus) but the problem I have also met with other rom (always FULL WIPE).
Sometime when make a call .. I don't hear the ringing call, i hear mute, and, if try to say something , hear my voice in the headset ..
Try to see the screen, and verify that the call is start (i see the time of call ..)
Pull down the call .. try again .. and finally hear ringing .. answer .. and the phone is perfect (the caller tells me that he answered even before .. but did not hear me!)
What may be due??!
I've already disabled the noise reduction during call.. but nothing change..
I make the passage from 4.1.2 to 4.2.2 custom custom WITHOUT SPECIAL METHODS .. simply by flashing the cwm zip file of the rom.
It's the right process isn't it?
Hope in your answer... and.. sorry for my bad english..
no one could help me???
could be the passage from custom 4.1.2 to custom 4.2.2 without deep clean? move to it with normal flash in cwm with full wipe
Sent from my GT-I9300 using Tapatalk 4 Beta
Search exact same question asked multiple times .
jje
JJEgan said:
Search exact same question asked multiple times .
jje
Click to expand...
Click to collapse
Sorry.. but i've searched and tried to disable the noise reduction option.. but nothing happened.. sometimes.. without a logical.. i heard only my echo voice...
flash a different modem and check it. you searched it? no you haven't totally. many identical posts are already floating over the xda forum about this. any how try the suggestion and report back. :thumbup:
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
orei said:
Sorry.. but i've searched and tried to disable the noise reduction option.. but nothing happened.. sometimes.. without a logical.. i heard only my echo voice...
Click to expand...
Click to collapse
https://www.google.co.uk/search?q=P...fficial&client=firefox-a&channel=np&source=hp
Yeah, i've search for it.. but it didn't work.. the modem that i try.. is the same of other people, that didn't have the problem.
I've tried with clean rom.. but nothing change.. a question first.. is the right sequence to change from 4.1.2 custom to 4.2.2 custom the FLASH IN THE CWM? without odin pass with 4.2.2 base rom?
Thanks
It's always a wise idea to wipe everything(except SD) when moving to a major Android version. (4.1.2 > 4.2.2)
xpmode said:
It's always a wise idea to wipe everything(except SD) when moving to a major Android version. (4.1.2 > 4.2.2)
Click to expand...
Click to collapse
i do!!! full wipe!!!