Ubuntu Touch Developer Preview
for n7100 and t0lte (at&t/tmo as well)
Keep in mind that this is only a developer preview, and does not function as an everyday ROM.
I will not be responsible for any damage caused by flashing this ROM or anything related.
Downloads:
Download the following (matching your device) and put them on your sdcard:
t0lte: t0lte
n7100:n7100
everyone: raring-preinstalled-phablet-armhf.zip: raring-preinstalled-phablet-armhf.zip (you have to search for a file named like this, as it gets updated sometimes)
Flashing instructions:
install a CWM recovery on your device (if not already installed)
wipe data/factory reset (Make backup first)
flash ubuntu-xxxxxx-[device].zip
flash raring-preinstalled-phablet-armhf.zip
reboot
there is no bootanimation displayed, hence the screen turns black after samsung logo, and turns back on after about 30 sec.
Current status:
Working:
Wi-Fi
Fonts (text rendering)
auto-rotatate
Cam (for n7100 only)
storage - mounting to pc (for n7100 only)
Not working:
everything else
Sauce:
Kernel
smdk4412-common
Device: t0lte
Device: n7100
Hardware Samsung
Vendor Samsung
Click to expand...
Click to collapse
Thanks:
- MaxWallstedt
- Androguide.fr
going to use this later
Thank you for your work . Just one question- Gsm doesn't work right ? Is there any foresee able solution ?
Sent from my GT-N7100 using xda app-developers app
waaaaaaaaw buddy
thanx for ubuntu. i love ubuntu & linux mint
Another epic work started from epic developer:thumbup:
Sent from my GT-N7100 using Tapatalk 2
This is interesting.. Looks like we will see good progress on ubuntu touch 13.04 All the very best...
n7100 build is up. for some reason it is 5 mb smaller than t0lte. i can't test this build myself. it could not be booting. please report back
DerTeufel1980 said:
n7100 build is up. for some reason it is 5 mb smaller than t0lte. i can't test this build myself. it could not be booting. please report back
Click to expand...
Click to collapse
No one tried? Without feedback I'll only can keep building for t0lte
Gesendet von meinem GT-N7105 mit Tapatalk 2
DerTeufel1980 said:
No one tried? Without feedback I'll only can keep building for t0lte
Gesendet von meinem GT-N7105 mit Tapatalk 2
Click to expand...
Click to collapse
Now downloading
@DerTeufel1980 ,
- Boots
- Camera works (both front and rear)
- Couldn't receive or make calls
- Fonts are broken
- Couldn't connect to my WiFi network as it has a password, and I can't type it... The keyboard keeps closing while I type.
DubelBoom said:
Now downloading
@DerTeufel1980 ,
- Boots
- Camera works (both front and rear)
- Couldn't receive or make calls
- Fonts are broken
- Couldn't connect to my WiFi network as it has a password, and I can't type it... The keyboard keeps closing while I type.
Click to expand...
Click to collapse
downloading now
I knew it !
Der Teufel
I saw you asking a few questions on the Ubuntu developers site and I JUST KNEW that you couldn't resist this !!
I was counting the minutes until I saw an Ubuntu post from Der Teufel !!! ( my instincts were correct )
I will definitely help you test, if you need ( N7100 gsm )
kashortiexda said:
Der Teufel
I saw you asking a few questions on the Ubuntu developers site and I JUST KNEW that you couldn't resist this !!
I was counting the minutes until I saw an Ubuntu post from Der Teufel !!! ( my instincts were correct )
I will definitely help you test, if you need ( N7100 gsm )
Click to expand...
Click to collapse
What? Where did you see me posting?
Thanks for all your help and great feedback.
Gesendet von meinem GT-N7105 mit Tapatalk 2
DubelBoom said:
Now downloading
@DerTeufel1980 ,
- Boots
- Camera works (both front and rear)
- Couldn't receive or make calls
- Fonts are broken
- Couldn't connect to my WiFi network as it has a password, and I can't type it... The keyboard keeps closing while I type.[/QUOTEmy
My experience was te same except my keyboard didnt force close on me but really couldnt type as it was hard to make out the characters due to the broken fonts
Click to expand...
Click to collapse
I'll check the fonts. They are displayed normal on t0lte. On the other hand, cam and wifi weren't working for me. Weird....
Gesendet von meinem GT-N7105 mit Tapatalk 2
found the font issue. posting this by running ubuntu
new builds uploaded:
- fixed fonts (n7100)
- fixed wifi (if it wasn't already working)
Nice build dude
Thanks for the work (I finally ended with your )
On my n7100 wifi works (scan networks), except it cannot authenticate.
If it just me, I'll try again tonight
RolluS said:
Nice build dude
Thanks for the work (I finally ended with your )
On my n7100 wifi works (scan networks), except it cannot authenticate.
If it just me, I'll try again tonight
Click to expand...
Click to collapse
I could connect to my secure wifi. Maybe there is a difference how they are protected.
Gesendet von meinem SGH-I317 mit Tapatalk 2
Hay man plz tell me is there any way i could help u? U r doing great job really thanks
Sent from my GT-N7100 using xda app-developers app
tariqso said:
Hay man plz tell me is there any way i could help u? U r doing great job really thanks
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I don't know. If you know something about compiling or coding... For sure
Gesendet von meinem GT-N7105 mit Tapatalk 2
Related
can someone make gsm patch to work on umts spyder?
original link:
http://droid-hive.com/index.php?/topic/1645-cdma-razrmaxx-pacman-rom-ported-for-kexec-by-bkjolly/
GSM: http://forum.xda-developers.com/showthread.php?t=2170352
I don't know if this is the same rom exactly, but you can grab the build.prop, compare it to the cdma build.prop and change related entries. Now open the gsm rom folder, navigate to /system/lib/ and search for files with name "ril". Copy EVERYTHING the search function listed and copy those files into the cdma rom folder /system/lib. Now Copy your modified build.prop to /system and there you are: A gsm-Patch! If it still doesn't work, check the build.prop again, maybe you missed something.
It seems to have an extremely slow interface. At least this is what I've felt.
On KiNG.KaNG rom, I also have the problem of extremely slow interface after flashing the GSM patch...
It seems that there are still some things have to change to switch CDMA into GSM on Kexec roms
Edit: here's the GSM version for the same rom
http://droid-hive.com/index.php?/topic/1647-gsm-razrmaxx-pac-man-rom-by-bkjolly77/
Both will be updated by the end of the day to 22.0
AW: PACMAN on KEXEC [RAZR SPYDER]
bkjolly said:
Both will be updated by the end of the day to 22.0
Click to expand...
Click to collapse
Absolutely fantastic job! I'm looking forward to the update!
Gesendet von meinem XT910 mit Tapatalk 2
Updated
Both builds updated in their original threads.
AW: PACMAN on KEXEC [RAZR SPYDER]
GSM link is broken
Gesendet von meinem XT910 mit Tapatalk 2
Merlinos1 said:
GSM link is broken
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
http://144.76.40.180/Devs/BkJolly/Umts_Spyder/umts_spyder_PAC_JB_4.2.2-v22.0.0_20130318-154615.zip
bkjolly said:
Both builds updated in their original threads.
Click to expand...
Click to collapse
Thank you!
I opened a thread in our German forum for this ROM
http://www.handy-faq.de/forum/motor...axx_pac_man_rom_by_bkjolly77.html#post2485682
I installed the umts_spyder version and it's really cool to have lots of config options, and the tablet mode looks nice (more screen resolution would be needed - i'll go blind-, but poor razr )
Enviat des del meu Motorola RazR Maxx
how to use this hybrid functions? i set something on, apply but nothing changes...
xtam said:
how to use this hybrid functions? i set something on, apply but nothing changes...
Click to expand...
Click to collapse
I haven't really played with it yet. I've just seen that Settings and Gmail are in tablet mode by default. I'll try it later, but so far it's a nice twist.
Enviat des del meu Motorola RazR Maxx
In the original thread it says "Kexec Rom Slot 1 Only".
Do I need anything special to make kexec work!?
Or simply flashing with BMM on slot 1 will work?
lucas.hohmann said:
In the original thread it says "Kexec Rom Slot 1 Only".
Do I need anything special to make kexec work!?
Or simply flashing with BMM on slot 1 will work?
Click to expand...
Click to collapse
Just flash on Slot 1 with BMM... kexec ROMs work over every kernel, but don't forget activate Custon kernel (Kexec) in BMM or it won't boot...
lucas.hohmann said:
In the original thread it says "Kexec Rom Slot 1 Only".
Do I need anything special to make kexec work!?
Or simply flashing with BMM on slot 1 will work?
Click to expand...
Click to collapse
I tested on slot 3 in bmm 0.3.4 and it worked, had made t 650mb system, 650mb data and 650mb cache partition. Maybe smaller but i tested only with 650
AW: PACMAN on KEXEC [RAZR SPYDER]
flashing whith BMM is working on every slot - testet slot1 & slot4 :thumbup:
Gesendet von meinem XT910 mit Tapatalk 2
Any one have the link for cdma sypder zip? The one on droid-hive is down at the moment. Thanks
AW: PACMAN on KEXEC [RAZR SPYDER]
lbroksle said:
Any one have the link for cdma sypder zip? The one on droid-hive is down at the moment. Thanks
Click to expand...
Click to collapse
http://144.76.40.180/Devs/BkJolly/Spyder/spyder_PAC_JB_4.2.2-v22.0.0_20130318-151637.zip
Gesendet von meinem XT910 mit Tapatalk 2
Installed it on slot 2 and everything worked fine.
Except Hybrid Settings, I can't find a way to get Gmail and Settings to be displayed in the regular phone mode.
Did anybody manage to make it work?
Hey peeps,
to get some load from the omni development thread I thought i make a q&a thread.
The related development threads can be found here (4.3) and here (4.4).
If you got any questions or feature requests, please place them here.
Documentation
OmniROM general forums are available there (generic feature request,...) - http://forum.xda-developers.com/forumdisplay.php?f=2601
Docs (still WIP) are available there - http://docs.omnirom.org/
Prerequesits
4.4
CWM Touch 6.0.4.4 (if you have a metadata error when flashing, you're using a wrong recovery!)
Knowledge about Android installation
How to flash
If coming from a different rom or different android version
download Rom and place it on your sd
download gapps (4.3 / 4.4) and place it on your sd
reboot to recovery
wipe data/factory reset
flash Rom
flash gapps
reboot and have fun
Updating omni (except from 4.3 to 4.4)
download rom and place it on your sd
reboot ro recovery
if stated wipe data/factory reset
flash rom
reboot and have fun
Known bugs
4.4
Video playback is messy
Camera (pictures) is a bit broken
4.3
FM radio doesn't work by stock (needs external application and hacks)
Compass doesn't work properly
2D acceleration is laggy
Download
4.4
Nightlies
http://dl.omnirom.org/i9300
4.3
"Official" test builds (the "" are, because they aren't build by the official build server)
http://goo.im/devs/Rebellos/i9300/omni
Mirror:
http://d-h.st/C3w
Reporting Bugs
Please keep in mind, omni is still work in progress, so some glitches are expected, if you face any bug, please add a log or at least step by step information to reproduce it and report it at gerrit.omnirom.org (unmerged changes), jira.omnirom.org (merged changes) or at the bug tracker. If you can't provide the needed information to reproduce it or a log, post it here.
Please keep in mind, if you use your own mods, kernel or any other modification which isn't shipped with the rom, try first if it's working without the modifications before reporting or asking about it.
FAQ
4.4
Q: My singal indicator shows only one bar, why so weak?
The signal itself isn't that weak, it's just a graphical glitch showing it as weak.
Q: I got an error within recovery, what to do?
See, prerequesits
Q: My camera doesn't work, how to get it fixed?
At first opening the camera the system will crash, but when it booted up afterwards the camera works.
4.3
Q: Mobile data doesn't work, how to fix it?
Search for the apn settings for your provider and add them manually
Q: Active display kills my battery, what to do?
Active Display uses much juice if the pocket mode is enbaled, because the proximity sensor is used, if it drains too fast, turn pocket mode off and let the notification redisplay instead (half an hour or hour isn't a bad interval and won't use that much juice).
Q: Where to find the Multi-Window feature?
Go to the recent activity list (long press home), long press the activity you like to have in Multi-Window and choose add to splitview from the contextmenu.
Reserved
Can I ask? if I wanna ask? Where do I ask? Ha ha ha
Sorry for the O. T.. Just can't keep it to myself
Gewd work @Tectas :good:
Sent from my GT-I9300 using Tapatalk
We're can I find multi window features? What build is that on. I'm on 20/10 build.
andrewwright said:
We're can I find multi window features? What build is that on. I'm on 20/10 build.
Click to expand...
Click to collapse
All builds, at recents list, longpress the window you like to add to split view.
Gesendet von meinem GT-I9300 mit Tapatalk
Thanks button is not working :thumbdown: thank you for the info :thumbup: also on 20/10 build there is no data. Restore APN not working for data. Calls and Tex's working ok
andrewwright said:
Thanks button is not working :thumbdown: thank you for the info :thumbup: also on 20/10 build there is no data. Restore APN not working for data. Calls and Tex's working ok
Click to expand...
Click to collapse
What you mean by restore, if you talk about restoring with titanium or similar, doesn't work most of the time, just search for them and type them in manually under settings - > more - > mobile networks and it should work fine (at least for everyone else, where mobile data didn't work out of the box it worked).
Gesendet von meinem GT-I9300 mit Tapatalk
Got it. Many thanks :thumbup:
Why there are two dev host mirrors? You're both working on the same?
tapatalked with Galaxy S3
Hey tectas!
Nice Job so far!
Is it possible to ad halo?
Greetz
Fireworkerfp
Gesendet von meinem GT-I9300 mit Tapatalk 2
romskii said:
Why there are two dev host mirrors? You're both working on the same?
tapatalked with Galaxy S3
Click to expand...
Click to collapse
The dev host links are user builds from me and hackworks, both as well so only include source from omni repositories, my last includes more cherry picks, like active display and device settings, hackworks less, but is built more recent.
Fireworkerfp said:
Hey tectas!
Nice Job so far!
Is it possible to ad halo?
Greetz
Fireworkerfp
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
It has been pushed to gerrit and reviewed, but it won't be included (at least not soon), because multi window and halo have a conflict, because of an identical flag.
Gesendet von meinem GT-I9300 mit Tapatalk
Hi Tectas you make a 4.4 build or waiting of the officeal reales
Gesendet von meinem GT-I9300 mit Tapatalk
SweetCupcake said:
Hi Tectas you make a 4.4 build or waiting of the officeal reales
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
Will check it in the evening, did a quick peak yesterday, but came across some errors, today evening I got time to look closer and probably fix them.
Gesendet von meinem GT-I9300 mit Tapatalk
Cool then I wish you much success... :good: :fingers-crossed:
Will that 4.4 build contain fixes from 4.3 builds ?
d1rekt0r said:
Will that 4.4 build contain fixes from 4.3 builds ?
Click to expand...
Click to collapse
Basically yes, but it will also introduce new bugs.
Gesendet von meinem GT-I9300 mit Tapatalk
Tectas said:
Basically yes, but it will also introduce new bugs.
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
Hmm , I guess that's good, same goes on for the next CM ?
d1rekt0r said:
Hmm , I guess that's good, same goes on for the next CM ?
Click to expand...
Click to collapse
Same goes for every aosp Rom.
Gesendet von meinem GT-I9300 mit Tapatalk
Since Omni is currently mostly an AOSP rom with a few goodies and tweaks, I found the following Xposed mod works perfectly and brings with it a few very nice, yet sorely missed features to this rom. Till these are implemented, we can it them instead
Gravity Box - Screenshot on Power Menu, QuickSettings Tile Management, Navigation Bar Tweaks and a whole bunch of others.
XuiMod - BatteryBar as found on SlimBean
Tinted Status Bar - As the titles says, changes the status bar colour to match the currently running app
I only tested these so far and they work very well and there is no battery drain or perceptible performance decrease.
Welcome to my first Android-Project
This kernel is based on CyanogenMod kernel by arco68.
Features:
- BLN Support
Requirements:
1. A GT-I9195 or GT-I9190
2. CyanogenMod 10.2 or 11.0 or any rom based on that.
Feature-Requirements:
1. BLN App by "neldar" from the Play Store. You can download the Free-Version or buy the Pro-Version with additional functionality.
How to install:
1. Flash Kernel.zip with CWM (Video)
Attention:
I don't take the responsibility for anything. Flash on own risk! Always make a Nandroid-Backup before flashing!
Download
CyanogenMod 11.0 Versions: BLN is already integrated into CM11, so there is no need to flash this outdated kernel!
GT-I9195 Mirror
GT-I9190 Mirror
CyanogenMod 10.2 Versions:
GT-I9195 Mirror
GT-I9190 Mirror
Known Bugs:
- If you activate bln in the bln app and the bln test doesn't work, you have to close the app with the backbutton and start it again. Then pushing the test field and turning off your display should trigger the touchkey lights.
Battery Drain:
I activated bln and let the touchkeys light up for a whole hour and I lost 1% battery at this time. On the same scenario with the app NoLED, my loss was 4%. I also monitored the cpu with cpu spy and found out that while the NoLED notification was ongoing, my device never entered deepsleep. It was stuck on 384mhz the whole time, while with bln it was in deepsleep. Please notice that blinking consumes more energy than static backlight!
Remark:
This is my first android-project! So please be leniently with me, as I can't fulfill all your wishes in further development.
Anyway, I wish you fun with this kernel and please report in this thread about bugs etc...
Huge thanks goes out to proxuser! This wouldn't be possible without his tutorials on how to built kernel and carbon rom for the s4 mini.
And of course to arco68 who made the base for s4 mini development.
Credits:
- arco68 (for base kernel and cyanogenmod)
- proxuser (for his tutorial on how to build kernel)
- neldar (for his bln-mod)
- Christopher83 (for linaro optimized toolchain)
- ktoonsez (for build scripts)
- cyanogenmod team
- xda community
- android-hilfe community
Source: https://github.com/junkyde/vikinger
Changelog:
08.02.2014
- added new commits from cm 10.2 source
11.12.2013 - 23.12.2013
- added new commits from cm 11 source
08.12.2013
- added CyanogenMod 11.0 version
13.11.2013 - 30.11.2013
- added new commits from cm source
Ahh, there it is. will test it, like i promised it
Gesendet von meinem GT-I9195 mit CM 10.2
---------- Post added at 12:21 AM ---------- Previous post was at 12:18 AM ----------
can you upload the Kernel to another hoster? with my Phone i can Not download from uploaded
Gesendet von meinem GT-I9195 mit CM 10.2
mav744 said:
can you upload the Kernel to another hoster? with my Phone i can Not download from uploaded
Click to expand...
Click to collapse
I have edited the first post with a mirror
Testing.....for now bln test works fine
So far it works very well, Not so much notifications at the Moment, but the few i have the touch Keys notify me
Gesendet von meinem GT-I9195 mit CM 10.2
Wooow!!! BLN!!! Many thanks for it!!!
Tapatalk-kal küldve az én GT-I9195-el
Trying to flash. Seems that BLN is working fine (set blinking for missed calls for ex.). Nice work, mate!
good job!
if you push your sources, I may use or include them on some ROMs also how to build guide can be updated too..
junkyde said:
Welcome to my first Android-Project
So far, I have only built the version for the GT-I9195 (serranoltexx) variant of the s4 mini, so don't flash it on other device
Click to expand...
Click to collapse
Could you build this kernel for the GT-I9190 3g variant aswell please.
Sent from my GT-I9190 using xda app-developers app
Someone had tested in stock Rom?
zetcamp said:
Seems that BLN is working fine (set blinking for missed calls for ex.). Nice work, mate!
Click to expand...
Click to collapse
Thanks. I have only tested BLN with the lights as always on, because I can see them better then and it drains less battery! But glad to hear that blinking is working also.
proxuser said:
if you push your sources..
Click to expand...
Click to collapse
I will. Just need to figure out some more stuff with github etc... I am not so familiar with linux^^
BushTechy said:
Could you build this kernel for the GT-I9190 3g variant aswell please.
Click to expand...
Click to collapse
I will try, but you guys have to test, because I don't own a GT-I9190.
komixda said:
Someone had tested in stock Rom?
Click to expand...
Click to collapse
I guess it is not for stock rom
Gesendet von meinem GT-I9195 mit Tapatalk-4
In the newest carbon rom it's doesnt work here...
But bln app is active...
Tapatalk-kal küldve az én GT-I9195-el
Here is the build for the GT-I9190: http://ul.to/7giyab0v Mirror: http://d-h.st/vdl
If you guys test it and tell me, that it works fine, I will update the first post.
Hey dude, thanks for the kernel but it's not working in the latest cm nightly for me.
Should I install the official?
Sent from my GT-I9195 using xda app-developers app
Great to see BLN for our device
Envoyé de mon GT-I9195 en utilisant Tapatalk
Blulmn said:
Hey dude, thanks for the kernel but it's not working in the latest cm nightly for me.
Click to expand...
Click to collapse
weird. I have only tested it with cm-10.2-20131102-SNAPSHOT-M1-serranoltexx.zip
tested it on the newest nightly and it works like a charm
Gesendet von meinem GT-I9195 mit CM 10.2
sorry, double Post
Hi there,
I have my S4 Rom adapted for the Nexus 5. This, of course, you are allowed to test.
Objective:
The goal is to create a suitable for everyday use Rom, without compromise. The Rom it is created the current AOKP source code. As this source code from me in the near future for other devices (HTC one, Nexus 4, ...) is used, I am creating an app where just upload here the additional functions via OTA.
Rom Features:
AOKP code from 02/02/2014
Myhub Support
Busybox Installer (system / app)
Ex-Themer (system / app)
Gravitybox (system / app)
Kernel Tweaker (system / app)
Notification Toogle (system / app)
Xposed Installer (system / app)
ZIPme (system / app)
ro.sf.lcd_density set to 460 (default 480)
Lockring Icon exchanged
Hacker Kernel for Nexus 5 (Alpha Test)
Rom Control of AOKP team
Fast and Stable
More Follows
First Rom flash:
Your Nexus 5 must be unlocked, rooted and have a custom recovery.
Invites you down the Rom and Gapps.
Boot into recovery and make a backup.
After the backup, please make a Fullwipe!
Flash the Rom and Gapps.
Wipe Dalvik and Wipe Cache.
Reboot.
Update:
Invites you down the Rom and Gapps.
Boot into recovery and make a backup.
Flash the Rom and Gapps.
Wipe Dalvik and Wipe Cache.
Reboot
Tip: The hacker kernel consists of the current Cm kernel code. This is modded by me and somewhat improved. Since this CM code currently gets a few major changes, I recommend you here to the Franco kernel after reflashing!
Disclaimer:
For any damage that may result from flashing the ROM or the kernel is not stuck!
Download:
http://d-h.st/users/thehacker911
Thanks to:
Google
AOKP Team for the Base source
franciscofranco for the best Kernel
rovo89 for Xposed Framework
Maddes1402
mikrosmile
C3C076 for Gravitybox
SArnab©® for Ex-Themer
All Xposed Developers
All Xposed Modul Developers
Themes, Screenshot and Wallpaper:
Find here: https://www.dropbox.com/sh/qini2lau5pjgulk/1m0DxBkRwd
Gesendet von meinem Nexus 5 mit Tapatalk
Meant for me
Gesendet von meinem Nexus 5 mit Tapatalk
Good luck !
Hi,
Just one thing, since you have integrated some Xposed stuff, you should mention that your rom is not compatible with ART runtime.
Something like this, from the Xposed Framework thread:
After installing Xposed, the runtime gets reset from ART to Dalvik. Can you stop it please?
You can be glad that I implemented this, otherwise you would be in a bootloop know. Xposed isn't compatible with ART (yet). It's a completely different architecture with pretty much no documentation. Rewriting Xposed for the ART runtime requires understanding the concept, the code structure and many details to know how it works. I have already spent dozens of hours on that and some things are working. But still it's a long way ahead. Don't expect even a test version in the near future. So please don't ask when it will be available - you will surely know when it is ready. I have nothing else to say about that.
Click to expand...
Click to collapse
Because for sure you'll have some people asking for ART compatibility or why when they switch to ART it remains back to Dalvik, etc...
agrees're right. thank you. I will consider it in the next nightly.
Gesendet von meinem Nexus 5 mit Tapatalk
new nightly is uploading ...
code update
Xposed is not compatible with ART (yet).
Does this ROM have Lockscreen Notifications?
Sent from my Nexus 5 using XDA Premium 4 mobile app
No sorry
Gesendet von meinem Nexus 5 mit Tapatalk
thehacker911 said:
No sorry
Gesendet von meinem Nexus 5 mit Tapatalk
Click to expand...
Click to collapse
Nice dich wieder zu sehen
hello my friend. If you have time, and we need to have a little talk about a recovery in German
Gesendet von meinem Nexus 5 mit Tapatalk
I can't get this ROM to boot, I've tried multiple gapps.
https://www.dropbox.com/s/9fiuucitm7alawm/gapps-kk-20140116-signed.zip
Just try this. Can you give me please upload your Gapps or give the link? So that I can pursue it?
Gesendet von meinem Nexus 5 mit Tapatalk
thehacker911 said:
https://www.dropbox.com/s/9fiuucitm7alawm/gapps-kk-20140116-signed.zip
Just try this. Can you give me please upload your Gapps or give the link? So that I can pursue it?
Gesendet von meinem Nexus 5 mit Tapatalk
Click to expand...
Click to collapse
I think I figured it out, its most likely Multirom related. I'm going to retry it tomorrow with a different kernel. I got another AOKP build that wouldn't boot to work by flashing a different kernel on a clean install.
Let me know if it worked. Thank you
Gesendet von meinem Nexus 5 mit Tapatalk
New Nightly online!
911 is one of the most offensive numbers around today. By this I mean it's use other than to refer to a date in history. It's not hip. To use it as an ID is sick, IMO. No excuses. I'm not being petty. Just showing respect to the dead and relatives of the dead.
#64268gkyJL#8653%dhjGUKVS357.
howard bamber said:
911 is one of the most offensive numbers around today. By this I mean it's use other than to refer to a date in history. It's not hip. To use it as an ID is sick, IMO. No excuses. I'm not being petty. Just showing respect to the dead and relatives of the dead.
#64268gkyJL#8653%dhjGUKVS357.
Click to expand...
Click to collapse
I don't think it's intent that way...
So you're absolutely right. The nickname I had even before the September 11 Furthermore, what is so expressed quite different. In German, it would be 09.11. (DD/MM) Date of Death form my brother.
All thanks to @chirantantab :highfive: now you can have great sound on AOSP and CM based ROMs (without wasting your time on MIUI anymore). He deserves all the credit for this mod, I have just prepared this flashable zip so that installing becomes easy.
As per members of XDA, it is working great on Official CM12.1. I have personally tested it on AICP and SlimLP ROM by bitti09. My Mi3 sounds fabulous now
Just download and flash it using your favorite recovery (I used TWRP). No need to wipe anything after flashing the zip.
I am not providing any uninstaller at the moment and may or may not provide one in future (all depends on my mood).
I really don't think that you would want to go back to those tiny-winy sound after using this mod. But in case you want to just backup the /system/etc/mixer_paths.xml file before flashing this mod.
Enjoy
Disclaimer: 1. If you brick your device while trying to flash this harmless zip then congratulations!!! 2. If you become deaf after using the mod then please don't complain here, nor me or @chirantantab can do anything about it (we can only laugh at you). Please visit any nearby doctor and get your ears checked.
Ha ha Disclaimer: section well said:laugh::laugh:
Does it work on Mi4?
Sent from my MI 4 using Tapatalk
diongdyh said:
Does it work on Mi4?
Sent from my MI 4 using Tapatalk
Click to expand...
Click to collapse
Not sure bro, it might though. Don't have a Mi4 to test.
May be you can test it on Mi4 and let us know
As it is not tested for Mi4, you can just take a backup of the file (mentioned in OP), flash it and test.
Cheers
No difference flashed it on EOS :/
Sent from my MI 3W using Tapatalk
diongdyh said:
Does it work on Mi4?
Sent from my MI 4 using Tapatalk
Click to expand...
Click to collapse
u can send the mixer_path ..... so can compare both files
Cant flash on Cyanogenmod Recovery
Gesendet von meinem MI 4 mit Tapatalk
Will this work with dolby atmos mod?
Howieson29 said:
Cant flash on Cyanogenmod Recovery
Gesendet von meinem MI 4 mit Tapatalk
Click to expand...
Click to collapse
Who the hell uses the rusty recovery? Use TWRP!
Sent from my MI 4 using Tapatalk
diongdyh said:
Who the hell uses the rusty recovery? Use TWRP!
Sent from my MI 4 using Tapatalk
Click to expand...
Click to collapse
The Ota from Cyanogenmod works perfect with this. And no heat Problems and no GPS Problems. Only Think I miss from MIUI is FM Radio
Gesendet von meinem MI 4 mit Tapatalk
chirantantab said:
u can send the mixer_path ..... so can compare both files
Click to expand...
Click to collapse
Here it is.....
https://drive.google.com/file/d/0B9iLbkiyFtrASERfdkppYk1mMFU/view?usp=docslist_api
mdfarazb2 said:
Here it is.....
https://drive.google.com/file/d/0B9iLbkiyFtrASERfdkppYk1mMFU/view?usp=docslist_api
Click to expand...
Click to collapse
0.1% changes in PA Gains
Use the flashable zip or paste the modded file
Howieson29 said:
The Ota from Cyanogenmod works perfect with this. And no heat Problems and no GPS Problems. Only Think I miss from MIUI is FM Radio
Gesendet von meinem MI 4 mit Tapatalk
Click to expand...
Click to collapse
For FM Radio you can use the FM Fix in the General section of Mi3. Just follow the procedure in OP to flash the zip and enjoy FM Radio.
Cheers
chirantantab said:
0.1% changes in PA Gains
Use the flashable zip or paste the modded file
Click to expand...
Click to collapse
Bro, do you want me to create a separate zip for Mi4 using the file you have attached for convenience of others? It will take just few minutes for me.
rajib4 said:
Bro, do you want me to create a separate zip for Mi4 using the file you have attached for convenience of others? It will take just few minutes for me.
Click to expand...
Click to collapse
nope .... there are several mi phones and several HPS .... next day someone asked is it work on mi note/audio technica ,how many u made, ??? u'll be tired :laugh:
This zip is standard one ...just 0.1% change .... It'll be fine
May use the Enhancer zip or paste the mixer_path
Maybe the title is a little misleading, i compare the mod file with the none-moded one, just some volume values are increased, but the sound quality is still worse than miui or ivan's aosp. I'm using CM12.1 Official, notification sound latency or broken still exists.
TevicTT said:
Maybe the title is a little misleading, i compare the mod file with the none-moded one, just some volume values are increased, but the sound quality is still worse than miui or ivan's aosp. I'm using CM12.1 Official, notification sound latency or broken still exists.
Click to expand...
Click to collapse
Check ur Phone speaker/HP ,i think its already damage before,,,,
"just some volume values are increased"---yes! I know properly what to change exactly, ..... thats how proper gain and control works here !!! Changes everything ...ur sound will be dead...
I've 7 mi Phones ...........I tested each one with standard values ............ everything working fine here
Can anyone upload stock mixer of cm 12.1? I feel this mod broke my speaker and Bluetooth. Sound is more distorted and just brakes my speaker....
3n3rg1c said:
Can anyone upload stock mixer of cm 12.1? I feel this mod broke my speaker and Bluetooth. Sound is more distorted and just brakes my speaker....
Click to expand...
Click to collapse
Just dirty flash the ROM what you are using, it will revert the mixer to stock.
rajib4 said:
Just dirty flash the ROM what you are using, it will revert the mixer to stock.
Click to expand...
Click to collapse
Does this mod make the sound like on Ivan's ROM or MIUI?
I'm currently on AOSPA 5.1 by SynnyG
Thanks