i'm on omega rom v45 galaxy s3, could i flash v45.1 without wiping data?
phatbeo91 said:
i'm on omega rom v45 galaxy s3, could i flash v45.1 without wiping data?
Click to expand...
Click to collapse
Well, first of all, there is a original Omega tread for this question. And the second, yes you can.
factory reset if you have issues
You should reset cache and dalvik cache at least, not to have any problems. Always helps me when updating.
omega 45.1 please help
Ninolina said:
Well, first of all, there is a original Omega tread for this question. And the second, yes you can.
Click to expand...
Click to collapse
sorry for asking here...because i dont know where to post..forum says you are a noob ( actually i am) so you cant post in development section....ok i have just installed omega 45.1 on my gt-i9300 ...how to change theme in my phone? guide me if i have to download any app. for that...and bye long pressing power button(device option) i cant get option like shown in omega sceen shot.
please help me. sorry for poor english
i love omega rom! :victory:
Related
Hello,
i just installed genesis v5 over predator v3.
but now my evo says i don't have wifi module and mac id..
where is the problem? i wiped cache + dalvik and the rom even if different name is just an upgrade.
of course if i post in his thread would be better, but this forum rules are strange ^^.
if any1 could help me is welcome!
thx in advice
xukia said:
Hello,
i just installed genesis v5 over predator v3.
but now my evo says i don't have wifi module and mac id..
where is the problem? i wiped cache + dalvik and the rom even if different name is just an upgrade.
of course if i post in his thread would be better, but this forum rules are strange ^^.
if any1 could help me is welcome!
thx in advice
Click to expand...
Click to collapse
First off I deleted your other thread. Spamming just to bypass the rule will get you banned. Only warning.
Now for your problem wipe system and data and reflash the rom. Only wiping delvic can lead to issues like this. Does that mean you will lose all data? Yes. Just remember to back up your apps. And when restoring don't restore any system apps or setting
Sent from my Inspire 4G using Tapatalk 2
hi!
sorry for the other post, it wasn't realy meant to be spam, it was a "welcome to me" post .
ill try to reset all and reinstall but at this point i think i'll try out other roms heheh.
thx
xukia said:
hi!
sorry for the other post, it wasn't realy meant to be spam, it was a "welcome to me" post .
ill try to reset all and reinstall but at this point i think i'll try out other roms heheh.
thx
Click to expand...
Click to collapse
This will happen no matter what rom you flash if toy don't do a full wipe before flashing.
As for it not being a spam. Well its best not to lie when it was stated in the OP of the thread that is was just that. A spam to get past the rule.
Sent from my Inspire 4G using Tapatalk 2
ok sorry! peace & love..
anyway i did full wipe and installed the new cool sense rom, but 2d camera crash and need to restart phone, i resetted again and reflashed rom, again this problem..
how can i let the creator know it
xukia said:
ok sorry! peace & love..
anyway i did full wipe and installed the new cool sense rom, but 2d camera crash and need to restart phone, i resetted again and reflashed rom, again this problem..
how can i let the creator know it
Click to expand...
Click to collapse
Now when you say you reset what do you mean. To do a full wipe you should format system, data and then wipe delvic. Then flash the rom. Also did you read through the thread to see if anyone else had the same issue?
yes i did the cache,dalvik,data,factory and system format before instal the rom, i did it twince before post again to you to be sure..
and to say the true yea, there is another guy complaining it in the thread but the dev just said to get last firmware and do full wipe before instal.
that is what i did, just wanted to let him know to see if he has other solutions!
thx
Same 2d retro videocamera crash on FunkySandwich 3d 3.0.
any1 can confirm? or help me fix it?
thanks
Hallo.
I hope that somebody can help me. I have rooted my sgs3 and now it dont vibrates. Can please somebody help me and upload the File that be for the Vibration. Im on omega 31.1 and the problem is since v31 of this Rom. Im searching by Google and by xda and i dont found anything that helps. I clear all cachs, i try full wipe, Do Flash Standarte jb-Rom and root New. Please help me.
Greetz king_bullock
king_bullock said:
Hallo.
I hope that somebody can help me. I have rooted my sgs3 and now it dont vibrates. Can please somebody help me and upload the File that be for the Vibration. Im on omega 31.1 and the problem is since v31 of this Rom. Im searching by Google and by xda and i dont found anything that helps. I clear all cachs, i try full wipe, Do Flash Standarte jb-Rom and root New. Please help me.
Greetz king_bullock
Click to expand...
Click to collapse
If you want a real and big help from developer,you must reinstall the ROM (after a clear cache and davkin partition) and report step by step what option you had choice.
Hi everyone,
i need your help to fix my problem with jelly vanilla rom 6.1 of iiandskater.
I use Mesa kernel 4.1 and sometimes get freeze problem in Setting/App, i can't touch anything in about 3 minutes, and then it's back to default.
I try other roms and don't see that problem. I like Jelly Vanilla so much, so who can help me fix this?
Thank you so much!
P/S: sorry for my bad English
best solutons of ur problem is ask to ur kernel/rom thread
xzn said:
best solutons of ur problem is ask to ur kernel/rom thread
Click to expand...
Click to collapse
There you go. It's the best way to get answers and support.
AchillesAOT said:
There you go. It's the best way to get answers and support.
Click to expand...
Click to collapse
xzn said:
best solutons of ur problem is ask to ur kernel/rom thread
Click to expand...
Click to collapse
U guys serious? He just made his initial post so how the hell can he post in dev sections...
But ya he shud have posted this in q/a forum. Reported...Mods may move it soon
Best Regards,
AJ
alokbina said:
U guys serious? He just made his initial post so how the hell can he post in dev sections...
But ya he shud have posted this in q/a forum. Reported...Mods may move it soon
i'm a newbie and this's my first post
i can't reply in thread of iiandskater so i post my question here to get your help
i really nead help, if you know how to post a reply in that thread, please show me.
Thank you so much
Click to expand...
Click to collapse
lee_bruce said:
alokbina said:
U guys serious? He just made his initial post so how the hell can he post in dev sections...
But ya he shud have posted this in q/a forum. Reported...Mods may move it soon
i'm a newbie and this's my first post
i can't reply in thread of iiandskater so i post my question here to get your help
i really nead help, if you know how to post a reply in that thread, please show me.
Thank you so much
Click to expand...
Click to collapse
Hit the first ten post mark.
Reply about anything you know to othersask ur doubtsvoila u have ten posts and u can reply in development
Don't forget to hit thanks
Click to expand...
Click to collapse
mnishamk said:
Hit the first ten post mark.
Reply about anything you know to othersask ur doubtsvoila u have ten posts and u can reply in development
Don't forget to hit thanks
Click to expand...
Click to collapse
But he is allowed to ask, too. Just because he doesn't have the ten points mark doesn't mean he can't ask
Did you try to flash another kernel? Not MESA but another one? Or try to reflash the rom.zip without wipe data/factory reset
lee_bruce said:
Hi everyone,
i need your help to fix my problem with jelly vanilla rom 6.1 of iiandskater.
I use Mesa kernel 4.1 and sometimes get freeze problem in Setting/App, i can't touch anything in about 3 minutes, and then it's back to default.
I try other roms and don't see that problem. I like Jelly Vanilla so much, so who can help me fix this?
Thank you so much!
P/S: sorry for my bad English
Click to expand...
Click to collapse
Hi I know your issue since I faced it.The kernel you are using is bad for this rom.
Use FXP/CM9.1/CM10 Extended kernel for Xperia Mini Pro
This is found in the kernel section.Just see your device and download the latest one.
Then use flash tool to flash it after when you boot into jelly vanilla rom 6.1 make a factory data reset with also erasing mmc
It will solve your problem:good:
ryu2050 said:
Hi I know your issue since I faced it.The kernel you are using is bad for this rom.
Use FXP/CM9.1/CM10 Extended kernel for Xperia Mini Pro
This is found in the kernel section.Just see your device and download the latest one.
Then use flash tool to flash it after when you boot into jelly vanilla rom 6.1 make a factory data reset with also erasing mmc
It will solve your problem:good:
Click to expand...
Click to collapse
Thank you ryu i will try your way!
lee_bruce said:
Thank you ryu i will try your way!
Click to expand...
Click to collapse
Definitely use CM10 extended for its stated in rom that it needs this kernel.Also let me know if it work,even though I know it will:laugh:
mihahn said:
But he is allowed to ask, too. Just because he doesn't have the ten points mark doesn't mean he can't ask
Did you try to flash another kernel? Not MESA but another one? Or try to reflash the rom.zip without wipe data/factory reset
Click to expand...
Click to collapse
Yeah, i tried to flash lupus kernel for cm10 but it's not as smooth as mesa. I've never flash rom without wipe data before and will try this, can you explain me more. Thanks for your warmly help, that's good for newbie like me
ryu2050 said:
Definitely use CM10 extended for its stated in rom that it needs this kernel.Also let me know if it work,even though I know it will:laugh:
Click to expand...
Click to collapse
Hey ryu, my device is wt19i, so can i use this kernel which is for mini?
lee_bruce said:
Hey ryu, my device is wt19i, so can i use this kernel which is for mini?
Click to expand...
Click to collapse
your model is wt19i so its Live with Walkman™ phone with code-name-- (coconut)
I don't know but I don't think its advisable then search for any kernel cm10 based apart from mesa,try LuPuS-jB [LINARO 4.7][CM10 BASED],but this one had wi if issues for my mini pro.Give it a shot
looks like you already tried it then??
PS i thought your one was mini pro as well
lee_bruce said:
Yeah, i tried to flash lupus kernel for cm10 but it's not as smooth as mesa. I've never flash rom without wipe data before and will try this, can you explain me more. Thanks for your warmly help, that's good for newbie like me
Click to expand...
Click to collapse
To reflash the rom, just download the latest cm10.zip for your phone (if it's a live with walkman, wt19i then download the one for coconut) and the gapps (google apps) for android 4.1.2. Now put the two files on your sdcard and reboot in cwm or TWRP recovery. Then you just wipe cache (no data will be lost) and flash the cm10.zip and afterwards the gapps. Reboot and see if the lag still exists
If it still exists you have to change the kernel, or you try another version of MESA
Hi to all....
I have something to ask.....
Just installed the v23 from v20 with everything it's ok.
But i dont have camera 4.2 and gallery 4.2 is this ok.
installed with no full wipe thanks!!!!!!!
Please try asking in the Omega Rom thread.
Try reflashing again.
"To err is human, to forgive is divine"
Sent from my SGS II
i always clean wipe.. its simply less trouble that way.. but u can download the omega app from playstore n download those apps u mentioned through the app..
dudders007 said:
i always clean wipe.. its simply less trouble that way.. but u can download the omega app from playstore n download those apps u mentioned through the app..
Click to expand...
Click to collapse
Why..? It has been more than two weeks ago that he posted this question, and he never asked anything after the answer...
Edit: Huh? I thanked you..?
Donnie Sins said:
Why..? It has been more than two weeks ago that he posted this question, and he never asked anything after the answer...
Edit: Huh? I thanked you..?
Click to expand...
Click to collapse
i guess so, the thank meter incremented!!
i dunno y hes not replyin.. hes probably moved into questionin in the omega thread itself!
i clean wipe to avoid problems caused by ne older ROM remains to the new ROM jus in case.. i hav experienced ma phone rebootin now and then o hangin at every bit o movt without wipe.. dont want such stupid issues nemore.. thats y!
Omega ROM for SGSII?
Hello everyone on this fantastic forum.I can not ask in the Omega ROM subforum so I hope that someone here to answer. Will Indie proceed with the development of Omega ROM for Galaxy SII?
Hello
I hope you find answer under the link.
http://forum.xda-developers.com/showthread.php?p=41464009
-MVKA
Sent From My Pink & Xparent GT-I9505
MVKA said:
Hello
I hope you find answer under the link.
http://forum.xda-developers.com/showthread.php?p=41464009
-MVKA
Sent From My Pink & Xparent GT-I9505
Click to expand...
Click to collapse
Thank you. I follow the topic. I hope that in the next Omega version, to be installed the latest philz kernel, and I hope that the work for multiple devices will not be more problems and bugs. Soon ... :fingers-crossed:
First of all, thanks to all who have made this rom suv
my problem is:
whats app does not work for me crashes after entering the name
how can I fix it?
p.s (sorry for my english but I'm Italian)
falco66 said:
First of all, thanks to all who have made this rom suv
my problem is:
whats app does not work for me crashes after entering the name
how can I fix it?
p.s (sorry for my english but I'm Italian)
Click to expand...
Click to collapse
have you tried re installing it?
Wiping dalvik then re-installing? seemed to work for me
LegendaryLvl1 said:
have you tried re installing it?
Wiping dalvik then re-installing? seemed to work for me
Click to expand...
Click to collapse
Not to work.
or put revolution s4 v12 all ok
aspect s5 v3.
Thank you all.