Hi, I have a Stock T-Mobile HTC One with no Root using the stock APN below
APN: fast.t-mobile.com
APN Type: default,supl,admin,hipri
And my speeds on HSPS+ are super slow no more then 3.0MB
But when I'm using this APN settings bellow
APN: epc.t-mobile.com
APN Type: default,supl,admin,mms,hipri
I get 10.0MB UP to 20.MB but wont send any MMS. Has anyone run into similar issues on the HTC One? Is there a fix for MMS.
Thanks
Set MMSC to http://mms.msg.eng.t-mobile.com/mms/wapenc
PcFish said:
Set MMSC to http://mms.msg.eng.t-mobile.com/mms/wapenc
Click to expand...
Click to collapse
Thanks I will give this a try.
PcFish said:
Set MMSC to http://mms.msg.eng.t-mobile.com/mms/wapenc
Click to expand...
Click to collapse
It works
Sent from my HTC One using Tapatalk 2
I hope I am not intruding here, but this thread is the closest to what I am looking for (stock) and I figured that any one of you could probably answer this question.
I do not have direct access to the phone and need to pass this on to my son, so please dont skip any steps, assuming knowledge. I have never even held an HTC phone yet. My son absolutely loves it though and has me intrigued. ?
Anyway, he has an "HTC One" that he purchased here in the USA, at a T-Mobile store.
I know that with my Samsung, there is not only the Samsung line name (Note 2), but there is also a specific Model # that Sprint puts into the phone (in my case, SPH-L900). And then, even from there, it divides up further into US & International versions, each with its own model #, even within the same carrier.
I am thinking that maybe it is the same for the HTC One line?
My son looked in the Info" screen, but all it says is "HTC One" and nothing else.
Please, where should he go to find this information?
Or is this not relevant in the HTC world?
He wants to stay with the Factory ROM, but Root it. I know applying the wrong tools can quickly brick a phone.
Can someone help me with this please? Once I have the right tool, then I can take it from there. Thanks!
<>~<>~<>~<>~<>~<>~<>~<>~<>~<>~<>~<>
Posted with TapaTalk 4, on my way cool
Samsung Galaxy (Sprint SPH-L900) Note 2
Whompasaurus ROM/Perseus Krnl/JB 4.1.2
tried for fun
Tried the epc APN out of curiousity..it was 4G only. I guess if you live in a HSPA or LTE are, the "fast" APN is what you want. I now have a different APN to try though when traveling. This is in the Hampton Roads, VA area
Zeuszoos said:
I hope I am not intruding here, but this thread is the closest to what I am looking for (stock) and I figured that any one of you could probably answer this question.
I do not have direct access to the phone and need to pass this on to my son, so please dont skip any steps, assuming knowledge. I have never even held an HTC phone yet. My son absolutely loves it though and has me intrigued. ?
Anyway, he has an "HTC One" that he purchased here in the USA, at a T-Mobile store.
I know that with my Samsung, there is not only the Samsung line name (Note 2), but there is also a specific Model # that Sprint puts into the phone (in my case, SPH-L900). And then, even from there, it divides up further into US & International versions, each with its own model #, even within the same carrier.
I am thinking that maybe it is the same for the HTC One line?
My son looked in the Info" screen, but all it says is "HTC One" and nothing else.
Please, where should he go to find this information?
Or is this not relevant in the HTC world?
He wants to stay with the Factory ROM, but Root it. I know applying the wrong tools can quickly brick a phone.
Can someone help me with this please? Once I have the right tool, then I can take it from there. Thanks!
<>~<>~<>~<>~<>~<>~<>~<>~<>~<>~<>~<>
Posted with TapaTalk 4, on my way cool
Samsung Galaxy (Sprint SPH-L900) Note 2
Whompasaurus ROM/Perseus Krnl/JB 4.1.2
Click to expand...
Click to collapse
It's the m7 that is the model number
Sent from my HTC One using xda premium
Thank you.
<>~<>~<>~<>~<>~<>~<>~<>~<>~<>~<>~<>
Posted with TapaTalk 4, on my way cool
Samsung Galaxy (Sprint SPH-L900) Note 2
Whompasaurus ROM/Perseus Krnl/JB 4.1.2
ahernandez4110 said:
Hi, I have a Stock T-Mobile HTC One with no Root using the stock APN below
APN: fast.t-mobile.com
APN Type: default,supl,admin,hipri
And my speeds on HSPS+ are super slow no more then 3.0MB
But when I'm using this APN settings bellow
APN: epc.t-mobile.com
APN Type: default,supl,admin,mms,hipri
I get 10.0MB UP to 20.MB but wont send any MMS. Has anyone run into similar issues on the HTC One? Is there a fix for MMS.
Thanks
Click to expand...
Click to collapse
I use the epc version but on my apn type I just have default,supl,mms does this make any significant difference?
adjat84th said:
Tried the epc APN out of curiousity..it was 4G only. I guess if you live in a HSPA or LTE are, the "fast" APN is what you want. I now have a different APN to try though when traveling. This is in the Hampton Roads, VA area
Click to expand...
Click to collapse
I use epc APN for LTE.
HTC One
i know this thread is old and it might not be the right place but i have a rooted and SIM unlocked Sprint HTC that I have my t-mobile SIM card in and I can make calls send text fine but i cant get the data working correctly. Under APN i have a default one that is locked that is
Name: T-Mobile US LTE
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
APN type: default,supl,admin,hipri,mms
and both protocols are IPv4
now it says im connected to data and i have arrows with an H above them that sometimes flashes 3G but when i try and connect to the web i get an error that says Authentication via the proxy server was unsuccessful. Now ive tried adding over APNs with fast.tmobile.com fast.t-mobile.com epc.tmobile.com with same everything except APN type ive tried blank, just defualt, the same as I have above minus the mms and nothing seems to work. And it seems i dont even connect to data till I added another APN called T-Mobile data but ive since erased it and still shows connected but I get the proxy error. Should also add im running the lastest version on InsertCoin 4.4. Please help
bigbade said:
i know this thread is old and it might not be the right place but i have a rooted and SIM unlocked Sprint HTC that I have my t-mobile SIM card in and I can make calls send text fine but i cant get the data working correctly. Under APN i have a default one that is locked that is
Name: T-Mobile US LTE
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
APN type: default,supl,admin,hipri,mms
and both protocols are IPv4
now it says im connected to data and i have arrows with an H above them that sometimes flashes 3G but when i try and connect to the web i get an error that says Authentication via the proxy server was unsuccessful. Now ive tried adding over APNs with fast.tmobile.com fast.t-mobile.com epc.tmobile.com with same everything except APN type ive tried blank, just defualt, the same as I have above minus the mms and nothing seems to work. And it seems i dont even connect to data till I added another APN called T-Mobile data but ive since erased it and still shows connected but I get the proxy error. Should also add im running the lastest version on InsertCoin 4.4. Please help
Click to expand...
Click to collapse
Has that SIM worked successfully in any android phone? Might be as easy as calling tmobile and having them reprovision your SIM. Everything above looks correct for an unmodified apn.
Sent from my HTC One using Tapatalk
lampel said:
Has that SIM worked successfully in any android phone? Might be as easy as calling tmobile and having them reprovision your SIM. Everything above looks correct for an unmodified apn.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
yea its the SIM from my regular phone which is a T-Mobile version of the HTC One. Ive even copied the APNs from my current phone and tried that and still nothing
bigbade said:
yea its the SIM from my regular phone which is a T-Mobile version of the HTC One. Ive even copied the APNs from my current phone and tried that and still nothing
Click to expand...
Click to collapse
The only other two things I can think of that might work are go into the APN settings and click 'reset to default' reboot and see if it works. And try registering on another carrier in the network operators menu - you should get an error that your SIM isn't supported and then manual re-register on T-Mo.
Related
My phone is Samsung Galaxy S2 and I had this bug too on v1.1 but I manage to fix it by flashing the SMSfixupdate...tar
My provider is Virgin, and I either get 302610 or Bell as my provider which I find weird.
Try to select mobile network automatically and wait for a while under mobile network settings. press thanks button if that helped u.
Sent from my GT-I9100 using xda premium
MyLifeRocks10 said:
Try to select mobile network automatically and wait for a while under mobile network settings. press thanks button if that helped u.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
it didn't work..
To my knowledge Virgin uses the Bell Mobility Network which identifies itself as 302 610, the name depends on the APN settings and possibly some internal xml settings in the ROM, if it's not showing as roaming you're probably fine using 302 610 or Bell, but if your APN settings are correct it might fix itself, otherwise you'd have to contact the ROM dev about it.
thracemerin said:
To my knowledge Virgin uses the Bell Mobility Network which identifies itself as 302 610, the name depends on the APN settings and possibly some internal xml settings in the ROM, if it's not showing as roaming you're probably fine using 302 610 or Bell, but if your APN settings are correct it might fix itself, otherwise you'd have to contact the ROM dev about it.
Click to expand...
Click to collapse
so are you saying that it's okay for me to have Bell as my network, even though my current provider is Virgin? oh and when i went to check the APN settings and it just showed a blank screen
Try this for your APN settings:
Virgin Mobile Canada
Name: Virgin
APN: inet.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
Username: <Not set>
Password: <Not set>
Server: <Not set>
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MMS protocol: WAP 2.0
MCC : 302
MNC : 610
APN type : <Not set>
This may or may not fix the network name issue, but it will ensure that you can use mobile data and MMS which you probably can't without. Based on everything I've read you should be fine using 302 610 or Bell, there is no separate network or cell towers for Virgin in Canada.
Thanks, apparently it didn't work.. But I'm gonna trust you about this and hopefully, I won't mess things up. I'm just afraid that Virgin might sue me or something for using a different network instead of theirs. One last question though, now that i'm gonna be using Bell as network i guess.. I'm still gonna pay my monthly plan, right?
Blue.Gazer said:
Thanks, apparently it didn't work.. But I'm gonna trust you about this and hopefully, I won't mess things up. I'm just afraid that Virgin might sue me or something for using a different network instead of theirs. One last question though, now that i'm gonna be using Bell as network i guess.. I'm still gonna pay my monthly plan, right?
Click to expand...
Click to collapse
If your phone is still sim locked you can be safe in knowing that its the right network, because if it wasn't you couldn't do anything at all on your phone, if its not sim locked and your sim would allow you to switch networks it would show roaming if you were on the wrong one, far as i know you should be fine and nobody is going to sue you or bill you extra, but this is just what i've found online so don't sue me if im wrong
haha thanks, hopefully ur right.. v1.4 came out.. I wonder if someone who's in the situation as i am got this problem fixed
apparently it's still on v1.4 :/
Blue.Gazer said:
apparently it's still on v1.4 :/
Click to expand...
Click to collapse
Bummer, well I did a little more digging and 302 610 corresponds to the MCC and MNC of the network from the APN file and since in my above post for the apn for virgin the MCC is 302 and the MNC is 610, I can pretty much confirm 100% that you are on the correct network, so it's just a display error. I had this happen the other day actually on my Bell phone when I was flashing modems, sometimes the network would display as 302610 and sometimes it would display as Bell, so you could try flashing modems, I don't honestly know which one fixed it but it's back to displaying Bell again on XXLPS.
thracemerin said:
Bummer, well I did a little more digging and 302 610 corresponds to the MCC and MNC of the network from the APN file and since in my above post for the apn for virgin the MCC is 302 and the MNC is 610, I can pretty much confirm 100% that you are on the correct network, so it's just a display error. I had this happen the other day actually on my Bell phone when I was flashing modems, sometimes the network would display as 302610 and sometimes it would display as Bell, so you could try flashing modems, I don't honestly know which one fixed it but it's back to displaying Bell again on XXLPS.
Click to expand...
Click to collapse
THANK YOU SIR! v1.5 is out, I'm about to try it
Blue.Gazer said:
Thanks, apparently it didn't work.. But I'm gonna trust you about this and hopefully, I won't mess things up. I'm just afraid that Virgin might sue me or something for using a different network instead of theirs. One last question though, now that i'm gonna be using Bell as network i guess.. I'm still gonna pay my monthly plan, right?
Click to expand...
Click to collapse
Virgin Mobile basically comes from Bell. I have the same problem as you, but it's just a glitch since you're still on VM's network. So don't worry! Your actual network hasn't changed; this is only a fault on VM's part.
If you're using the AOKP builds of Resurrection Remix, go to Settings > ROM Control > General UI and then select "Custom carrier label" and you can change it to display "Virgin Mobile" manually.
I recently got myself a galaxy note from bell and it has not been what I expected. The phone works great for other non-aws providers but a nightmare with wind.
I installed several different modems, not knowing what works the best. Also forced it with *#2263#. However the result are ultimately the same. I'm constantly getting signal drops even though I have 4/5 bars. I'm unable to send texts or make calls even when the bars are near full. The data is essentially unusable at all times.
I have tired the phone with different sims which seemed to be working perfectly fine. Is there anyone having this issue as well or have a solution for it?
If I'm not mistaken, Wind uses the same frequencies as T-Mobile. Perhaps you could read the threads relating to their modems, settings, for some advice.
http://forum.xda-developers.com/showthread.php?p=25511899
New-T-Mobile Radio/Modem Thread
Yes, I have tried several different models for 1700MHz , all of which have the same problem. I'm able to connect to the network and says I have good reception but I get cut off A LOT!
fix your APN settings?
madman604 said:
fix your APN settings?
Click to expand...
Click to collapse
I select default wind. Not sure what more I have to do.
Are you on Gingerbread or ICS?
I had huge problems at first with Wind Mobile as well until I switched to the TELUS modified modem. People recommend Blaze but in my experience, it was just as bad as yours was.
ChronoReverse said:
Are you on Gingerbread or ICS?
I had huge problems at first with Wind Mobile as well until I switched to the TELUS modified modem. People recommend Blaze but in my experience, it was just as bad as yours was.
Click to expand...
Click to collapse
I'm currently on ICS using icsblaze, I have also tried using gb but I didn't see a difference. Is it possible to link me to the modem that you are using?
I finally figured it out! I had to setup the APN manually, now it works as expected.
killer8297 said:
I finally figured it out! I had to setup the APN manually, now it works as expected.
Click to expand...
Click to collapse
Take a minute and post your APN settings, then edit your thread title to say "solved".
MMS APN Settings:
Name: Wind CA MMS
APN: mms.windmobile.ca
MMSC: http://mms.windmobile.ca
MMS Proxy: 74.115.197.70
MMS Port: 8080
MCC: 302
MNC: 490
APN type: mms
APN Protocol: IPv4 (Some varients will have this setting)
I've done some searching and didn't happen to run across anyone that was having a similar problem. Originally, I thought this might be a StraightTalk/Verizon issue, but I've confirmed that one of my family members with ST T-Mobile can text with Verizon folks just fine. So let me dive into the details...
I've had my StraightTalk T-Mobile sim card for about a week now. I activated it without any problems, set up the APN and everything seemed to be working just fine. I've been texting with a few family members and some co-workers without issues. My data and voice calls are all working fine as well.
I went to text a friend that has Verizon post paid service and he never got my text. So I sent a few more without success, then tried to text my own Verizon number (since my account is still active for the moment) and I never received my own text either. He sent me a text message that I received just fine though, but again he didn't get my response. Just to further test, I send an MMS message to myself and my friend on Verizon and that came through just fine, so it appears that all texting capabilities work with the following carriers (AT&T, Sprint, Verizon, ST T-Mobile) with the exception of regular SMS to Verizon.
Here are my APN settings:
Name: StraightTalk T-Mobile
APN: wap.tracfone
Proxy: Not set
Port: 8080
Username: Not set
Password: Not set
Server: Not set
MMSC: http:**mms.tracfone.com (replace ** with //, since I can't post links)
MMS Proxy: Not set
MMS Port: Not set
MCC: 310
MNC: 260
Authentication Type: Not set
APN Type: default,supl,mms
APN Protocol: IPv4
Bearer: Unspecified
About the phone... I purchased an AT&T Note (sgh-i717) and unlocked it myself. The unlock was successful but I was only getting edge data since T-Mobile has re-farmed the towers in my area yet. So, I installed CWM and flashed the Blaze4G radios. I'm now getting consistent signal and H+ speed (4-8 mbps avg, 14 mbps peak). The only other thing I had to change was that my phone number wasn't showing up in the About Phone -> Status section, so I went into the dialer -> Settings -> Additional Settings -> My Phone Number and set it there in the format of xxx-xxx-xxxx. I also just flashed the T-Mobile VKL1 radio as well but no change in my sms issue.
I'm a bit lost at this point on why everything else would work except for sending sms to Verizon but yet I can receive them from Verizon just fine. Any suggestions would be greatly appreciated.
Texts aren't immediate when the network is busy. Sometimes the delay can be several hours.
None of my Verizon messages are ever delivered, some from 3-4 days ago. I called Straight Talk tech support and they are tracing some of my messages. One of the things they thing might be wrong is the message center number that is configured in my phone but they didn't want to change it until after they could do further research.
Update: Confirmed the smsc is correct, so that doesn't appear to be the issue.
Just a follow up in case anyone else ever had an issue similar... a T-Mobile technician called me today, they found out Verizon had blocked my cell phone number from their network. After the tech got the ban lifted, texting is working just fine.
apn type question
draiko913 said:
I've done some searching and didn't happen to run across anyone that was having a similar problem. Originally, I thought this might be a StraightTalk/Verizon issue, but I've confirmed that one of my family members with ST T-Mobile can text with Verizon folks just fine. So let me dive into the details...
I've had my StraightTalk T-Mobile sim card for about a week now. I activated it without any problems, set up the APN and everything seemed to be working just fine. I've been texting with a few family members and some co-workers without issues. My data and voice calls are all working fine as well.
I went to text a friend that has Verizon post paid service and he never got my text. So I sent a few more without success, then tried to text my own Verizon number (since my account is still active for the moment) and I never received my own text either. He sent me a text message that I received just fine though, but again he didn't get my response. Just to further test, I send an MMS message to myself and my friend on Verizon and that came through just fine, so it appears that all texting capabilities work with the following carriers (AT&T, Sprint, Verizon, ST T-Mobile) with the exception of regular SMS to Verizon.
Here are my APN settings:
Name: StraightTalk T-Mobile
APN: wap.tracfone
Proxy: Not set
Port: 8080
Username: Not set
Password: Not set
Server: Not set
MMSC: http:**mms.tracfone.com (replace ** with //, since I can't post links)
MMS Proxy: Not set
MMS Port: Not set
MCC: 310
MNC: 260
Authentication Type: Not set
APN Type: default,supl,mms
APN Protocol: IPv4
Bearer: Unspecified
About the phone... I purchased an AT&T Note (sgh-i717) and unlocked it myself. The unlock was successful but I was only getting edge data since T-Mobile has re-farmed the towers in my area yet. So, I installed CWM and flashed the Blaze4G radios. I'm now getting consistent signal and H+ speed (4-8 mbps avg, 14 mbps peak). The only other thing I had to change was that my phone number wasn't showing up in the About Phone -> Status section, so I went into the dialer -> Settings -> Additional Settings -> My Phone Number and set it there in the format of xxx-xxx-xxxx. I also just flashed the T-Mobile VKL1 radio as well but no change in my sms issue.
I'm a bit lost at this point on why everything else would work except for sending sms to Verizon but yet I can receive them from Verizon just fine. Any suggestions would be greatly appreciated.
Click to expand...
Click to collapse
I need help here can i root or flash my i717 if its already unlocked to different carreiers? Ineed help flashing and switching my apn type to suplmy apn type only has internet+mms and internet and mms thats what it says when i click on apn type,why dont i see the supl setting im running straight talk sim card but the back of the sim is pinkish looking,which means t-mobile compatable sim i think. I need step by step instructions. Im having very very slow data conection how do i get rid of the g and e symboleand make the 4g speeds come back, so.times when i turn off the phone and back on again the att logo shows up and the 4g then disapears and the HOME and g apears. I will have more time tomorrow to figure this out. Heading to work. If anyone can help me fix this i would really apreciate it thanks.
draiko913 said:
Just a follow up in case anyone else ever had an issue similar... a T-Mobile technician called me today, they found out Verizon had blocked my cell phone number from their network. After the tech got the ban lifted, texting is working just fine.
Click to expand...
Click to collapse
That's interesting. And it sucks. You could have spent hours\days working on something you could never fix. Did they give any reason for your block? Glad you got it worked out.
Those apn dont look right to me....im on st with my.note and.no problems.
Sent from my SAMSUNG-SGH-I717 using xda premium
webb7735 said:
I need help here can i root or flash my i717 if its already unlocked to different carreiers? Ineed help flashing and switching my apn type to suplmy apn type only has internet+mms and internet and mms thats what it says when i click on apn type,why dont i see the supl setting im running straight talk sim card but the back of the sim is pinkish looking,which means t-mobile compatable sim i think. I need step by step instructions. Im having very very slow data conection how do i get rid of the g and e symboleand make the 4g speeds come back, so.times when i turn off the phone and back on again the att logo shows up and the 4g then disapears and the HOME and g apears. I will have more time tomorrow to figure this out. Heading to work. If anyone can help me fix this i would really apreciate it thanks.
Click to expand...
Click to collapse
You'll want to flash the T-Mobile ROM in the development section. Follow the instructions carefully.
Sent from my SAMSUNG-SGH-I717 using xda premium
I have tmobile when inserted the simcard in my z2 I've noticed that I'm not getting any internet connection so i went to Setting/wireless and networks/internet setting and downloaded all the files then I went to mobile netword and changed it to 4G Tmobile, starting that day I keep losing connection every time I have to go to mobile network and change it manually although it's set on automatic, most of teh times 4g doesn't work and I have to set it to 3g... it's really annoying
In your dial pad type in *#*#info#*#* (numbers for info)
Go to phone info
Scroll down
Select prefered network mode
Select LTE or an option for local with
Go back to your network settings and see if 4G shows up
If not change your mode back to what it was before and call tmobile because they may have to sort some issues out for you
Sent from my D6503 using XDA Premium 4 mobile app
now whatever I'm doing I can't get data connection
shahabk818 said:
now whatever I'm doing I can't get data connection
Click to expand...
Click to collapse
go to your network settings, when tmobile USA shows up with 4G click it to register, once thats done, go back a menu and click on network mode and change it to LTE/HSPDA/GSM (or what ever bands are used in USA)
you should have data connection but 4G depends on how good Tmobile USA Coverage is
You may need to call TMo and ask them to do whatever they do in the backend to reset the phone to network connection. Another thing is to look at TMo support site for the correct APN settings. In my case, data was perfect but MMS would not work because the phone settings were incorrect. Basically, call TMo. They will even email you the settings.
One last thing. Try airplane mode off then on and see it that helps.
Sendt fra Q XPERIA Z2 D6503
shahabk818 said:
I have tmobile when inserted the simcard in my z2 I've noticed that I'm not getting any internet connection so i went to Setting/wireless and networks/internet setting and downloaded all the files then I went to mobile netword and changed it to 4G Tmobile, starting that day I keep losing connection every time I have to go to mobile network and change it manually although it's set on automatic, most of teh times 4g doesn't work and I have to set it to 3g... it's really annoying
Click to expand...
Click to collapse
One thing I would do, is to call T-Mobile and register the IMEI so they can provision the unit. The settings on their end may have something which is preventing it to connect to it based on a previous phone's capabilities.
-----------------
I had something similar similar but it was with AT&T. In my case, it would not connect to LTE at all as it would stick on HPSA. This was because I had a S3 (UK version), which was only capable of HSPA+, and I had registered the IMEI with them prior.
I had a lot of problems getting my Z2 to work on T-Mobile as well. I finally used the following settings to get everything to work.
Create 2 APNs, the first should have the Following Settings:
Name: T-Mobile
APN: fast.t-mobile.com
Proxy: 216.155.165.050
Port: 8080
MMSC: http://mms.msg.eng.t-mobile.com/mms/
MMS proxy: 216.155.165.50
MMS port: 8080
MCC: 310
MNC: 260
APN Type: defaul,supl,admin,dun,mms
APN Protocol: IPv4
APN Roaming Protocol: IPv4
Now create a second APN with the following settings:
Name: T-Mobile GPRS
APN: epc.tmobile.com
MCC: 310
MNC: 260
APN Protocol: IPv4
APN Roaming Protocol: IPv4
With both of those created, go to your list of APNs and make sure your first one (T-Mobile) is selected.
These settings fixed my problems, hope you get it worked out.
Sango2 said:
One thing I would do, is to call T-Mobile and register the IMEI so they can provision the unit. The settings on their end may have something which is preventing it to connect to it based on a previous phone's capabilities.
-----------------
I had something similar similar but it was with AT&T. In my case, it would not connect to LTE at all as it would stick on HPSA. This was because I had a S3 (UK version), which was only capable of HSPA+, and I had registered the IMEI with them prior.
Click to expand...
Click to collapse
I had a similar issue, is that why my phone doesn't have signal with tmobile cause I have to register the IMEI?
Alant514 said:
I had a similar issue, is that why my phone doesn't have signal with tmobile cause I have to register the IMEI?
Click to expand...
Click to collapse
It is likely, make sure the internet/mms settings are downloaded too.
Once the IMEI is registered, they will able to see what phone it is and enable the proper features which the phone is capable of.
I heard it's best to let them know as the IMEI as well because they could flag the unauthorized phones and reject it from being connected the carrier.
Hello
I bought a verizon lg g3 from amazon since i heard that verizon phones comes factory unlocked for verizon.
I tried everything from changing the network setting to gms , global but it doesnt connect to tmobile signal. But after a network search it does detect tmobile , att verizon singnals.
I have not activated the phone using a verizon simcard.
hhfunadmin said:
Hello
I bought a verizon lg g3 from amazon since i heard that verizon phones comes factory unlocked for verizon.
I tried everything from changing the network setting to gms , global but it doesnt connect to tmobile signal. But after a network search it does detect tmobile , att verizon singnals.
I have not activated the phone using a verizon simcard.
Click to expand...
Click to collapse
Well I'm all honesty, I think you should have just bought the tmobile version because that is the one that comes unlocked. As for your signal problem, have you tried asking tmobile on how to do it? Or maybe you can look up YouTube videos on how to do so
Sent from my VS985 4G using Tapatalk
salvabigboy said:
Well I'm all honesty, I think you should have just bought the tmobile version because that is the one that comes unlocked. As for your signal problem, have you tried asking tmobile on how to do it? Or maybe you can look up YouTube videos on how to do so
Click to expand...
Click to collapse
I heard that verizon g3 does work on tmobile and it works for everyone. AM not sure if i missed out on some steps.
It works. If it doesn't work the only thing I would say is to check if the imei is clean and not reported blacklisted.
If that's good, then toggle the gsm setting from utms/gsm/lte to global and see of that helps
Sent from my VS985 4G using Tapatalk
I have an version lg g3 on tmobile from Verizon. You are missing the apn settings you need to manually enter possibly?
swap down from the top of the screen and hold the data circle icon - this will bring you to mobile networks. Select Access point names.
add a new apn.
Name: T-mobile LTE
apn: Fast.T-mobile.com (don't forget the -)
proxy: not set
port: not set
username: not set
passowrd: Not set
server: not set
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
mms proxy: not set
mms port: not set
mcc: 310
MNC: 260
Authentication type: not set
APN Type: default,supl,mms
Apn Protocol: ipv6
Apn roaming protocol: ipv4
Save.
Also in system select, I use LTE/GSM/UMTS mode.
Global mode works, but i cant send text messages through native app. So i use lte/gsm/umts mode so i can send texts.
I also downloaded the T-mobile visual voice app for visual voicemail