Hello community,
I have St15i Mini with viper xperia rom v6 and lupus kernel v6
yesterday i plugged the sd card, in my friends tablet, and after plug it back to my device and rebooting it,
i see now on every reboot...... optimizing app 1 of 8 .....
every reboot my device optimize now the 8 apks...
any idea what happend or how to fix this
update: wiped cache and dalvik cache, but 8 apks still get optimized on every reboot
try using "fix permissions" option from the recovery mode
"APKs are being optimized" means they are not in Dalvik Cache.
try to change ur kernel with kappa.
Related
If anyone if facing problems with MiniCM 1.0.0,follow these instructions:
Unable to install- Stuck at the BootAnimation:
1)Goto Xrecovery
Do a Full Wipe - Factory Reset
2)Go to Advanced
Wipe Dalvik Cache
3)In Main Menu,Wipe Cache Partiton
4)Reflash the ROM MiniCM 1.0.0
5)Reboot and use defaults for a while... Then reboot once again and then set your own options(to check if the Default one runs without any issues)
Unable to set frequency in the CM Settings:
1)Goto xrecovery
Do a Full Wipe
2)Install RC2
3)Install SetCPU and set the speeds
Check option to set on boot
4)Reboot once
5)Goto Xrec again
6)Install 1.0.0.0 over the installed RC2(dont wipe or do anything)
7)Once done,reboot and open SetCPU
8)Check Frequencies
9)Goto CM Settings and Performance> CPU
9)Now you can set Frequencies in the CM settings menu
Constant FCs(Force Closes) using any Launcher:
Do not enable any profile in SetCPU
Switch off all other profile options like Screen off,charging etc.
Just use one OC i.e. 710/122 or 729/122 or 748/122
Unable to Install Angry birds:
1)Reboot into xrecovery
2)Wipe Cache Partition
3)Goto advanced
Wipe dalvik Cache
4)Reflash the rom(if it does not work the first time)
5)Install Angry Birds now again from Market
Audio/Video out of sync:
1)Goto Android Market
2)Install lgCamera
3)Goto options
4)Set:
Res to 640x480
Encoder- mp4
Video bitrate- 2 Mbit /1 Mbit
Video Framerate - Auto/30
Audio Codec - AMR_NB
Audio Source- Microphone
4)Even then if you get problems,set source to Camcorder
5)I recommend Not changing Audio Source
For Higher Picture Clarity(in lgCamera app):
Set:
Resolution to 2592x1944
Format to PNG
Takes 10-15 sec to store into PNG and pic quality will be about 1.25-1.5 times better
Its preferred for single shots, for successive shots go for JPEG
LauncherPRO giving problems:
1)Restart phone
2)Set defaults in settings of LauncherPRO
3)Still got any issues, install ADW.Launcher or GOLauncher EX
For Crashes/UnResponsiveness:
Set these in setCPU
Default CPU Freq. 710/122 or 691/122
Profiles, Frequency,Priority:
Screen Off :
245/122
55
Battery < 40%:
600/122
50
Temp. > 40 Degrees:
657/122
55
Charging:
691/122
50
Problems with Audio output:
Use MIUI Player,WinAMP,PowerAMP..
Any other player may also work, never tried...
For a few phones,problem exists even in leaked HoneyComb Music player..
I listen to music 2 -3hrs a day and never found an issue with any of these
TWEAK FOR ARABIC LANGUAGE:
Tweak is here
FOR OTHER PROBLEMS:
1)Try setting SD cache to 3072KB
Try using Lower CPU Freq/OC like 691/657 etc..
Use SetCPU to alter Frequencies rather than CM settings
2)Open the zip file goto to system/lib/modules/ and delete ocx8.ko and uvx8.ko
You can do this with winrar. Then copy zip file and flash again.
Since you cant get to root explorer its the easiest way
In winrar just highlight the files and hit delete
2nd issue helped a few being stuck at bootscreen in the ROM.. .Try it once...
These are all my Observations and the instructions I Followed..
Thanks to a few other people who helped me solve my problems...
SPECIAL THANKS to nobodyatall.. Thanks alot for such a great ROM...
Its a perfect ROM,but a few are unable to sort out a few issues.. So started a small thread..
Please post your solutions also over here,so the problems can be sorted out easily...
what do i do if the phone sticks and reboots while in use
it works fine in powesave mode any other mode it will crash
Zeam launcher 2.9.2 run's great!!
Thanks very usefull for me for camera settings.Thanks again
spinner_w said:
what do i do if the phone sticks and reboots while in use
it works fine in powesave mode any other mode it will crash
Click to expand...
Click to collapse
If that is the case, just set the CPU freq to 691 or 710/122
and enable profiles in Set CPU
Create a profile such that on screen off,it goes to 245/122
and Battery<40% it goes to 600/122
and temp>40 degrees it goes to 657/122
I set to 710/122 after 3 crashes/reboots.. I think it depends on a high setting 748/245
Sent from my X10mini using XDA Premium App
brightness is totally clear only setting to the maximum (100)...why?
Brightness problems... Reflash it again.. Wipe all stats and caches...
Try again... If still having problems,report back... I have never had that issue
@tejagamer--good job.
Hi guys,
This is my first attempt of installing custom rom on my x10 mini. Ok, so here's the deal. I rooted my x10 mini with SuperOneClick, downloaded TItanium Backup and installed BusyBox, then downloaded xrecovery from here:http://forum.xda-developers.com/show...=superoneclick (the newest one also doesn't work) and everything works fine. I restarted my phone, entered xrecovery without any problem, made backup and started installing the custom rom step by step with instruction. After the installation everything looked fine, installation have completed as it should (well I think so ); I also did 'Factory Reset after it, rebooted and from now on my x10 mini restarts all the time, once (it was a miracle probably), I made to the guide screen but after few seconds mobile freezed and restarted, and this happen over and over again. Any help will be appreciate.
Edit: Forgot to mention that my 'mini' meets all the requirements
Edit2: Now I'm trying to install RC2 and have the same problems, idk what to do, I did everything step by step with instructions, and NOTHING! I'm now pissed off a little.
Hey dude....
Follow the Instructions stated above from scratch once..
It will and should work on all devices if it has 2.1.1.A.06 and correct baseband version
Check the first post for the steps...
@sathkartha Thanks dude
I have done this many times and nothing helped, this ****ty mobile is unromable ;/
Try going to 2.1 Stock
Then Goto xrec
Do Full Wipe
then install the rom
and reboot
By restoring or installing clear one from SE?
Edit: OK nevermind I installed clear one from SE
Go to SE rom/Install it
Restart
Wipe all now/Full Wipe
Then try Installing mini CM
Now see if you have any problem..
There are interrupts when I listen to music from stock music player, any solution? Thank you!
Download winamp from market?
If it would solve the problem, yes. Do you think the player is responsible or the rom or overclocking (I have stock settings)?
Thank you!
Check winamp for now
Edit: tejagamer what did you mean by: 5)Reboot and use defaults for a while... Then reboot once again and then set your own options(to check if the Default one runs without any issues), Do I need to use launcher program? or what you meant by defaults?
Fifty2008 said:
Check winamp for now
Click to expand...
Click to collapse
The problem remains..
I'm going to give a quick run down of my situation and what I have done and I would just like to get some understanding or guide to what the heck I'm doing different then everyone else.. and I have lots of knowledge in technology and I'v been playing around with phones for 14 years now.. So here's the deal.
I have 2 Sony Xperia X10a. - one from Rogers the other from Fido.. Who give's a crap.. OK next.
I flashed both phones with FlashTool 3.0.0 -
Rom - X10a_2.1update1_r2.1.A.0.435_Generic.ftf
Root IT / Reboot
Xrecovery Install. - I select the first one , so the one w/out GB in the name.
Copy Files to SD Card for GB Flash..Files I copy are..
" X10x.3.0.1.G.0.75.EWJET.xKernel.GB.x2.3ex.zip "
" ewX.xKernel.gb.X3.1f.zip "
I also have a folder "Addons" that I have a couple things like.. " SEMC.Calculator.zip & "SEMC.Gmail.Gtalk.Email.zip" ..so on..
I then Reboot the phone into Xrecovery...
1 - Wipe user data
2 - clear cache
3 - advanced options - clear cache again..
4 - Install Custom Zip....Select " X10x.3.0.1.G.0.75.EWJET.xKernel.GB.x2.3ex.zip "... Done
5 - Reboot Via XRecovery and Remove battery Instantly
6 - Flash via FlashTool - X10i_3.0.1.G.0.75_only kernel_baseband.ftf
7 - Unplug / Remove battery . Wait 10 Seconds.. Boot phone.
8 - Phones Booted.. My SD Card already was in 2 FAT32 Partitions. One 14GB one 1GB..
9 - Proceed to Link2SD App..Start it.. Reboot Phone..
10- Selected and Linked Apps in Link2SD .. Rebooted Phone..
11 - Started Link2SD ...go to " More " .. Selected link dalvik-cache files... Rebooted Phone
12 - Used File Explorer .. went to SDCard.. if there is a Scriptz folder Delete it.. there was no scriptz folder..
13 - Rebooted Phone.. Enter in Xrecovery mode.. Advanced options .. "Wipe dalvik cache"
14 - Install Custom Zip..Select " ewX.xKernel.gb.X3.1f.zip "... Done...
15 - Rebooted Via Xrecovery
16 - Started Link2SD... go to " More " .. Select "Link dalvik-cache files" again and then "Market Fix"
17 - Rebooted Phone again.
18 - Used phone.. Setup Google Accounts / Email / Facebook / A few apps / synced picasa photos... Rebooted
Done Install..
-----------------------------------------------------------------------------------------------------------------------
19 - Ran Quadrant Standard Benchmark .. Free From Market.. Only Scored 850
20 - Rebooted.. and then Installed SetCPU.. Few $ from Market....When I started SetCPU I selected " Show Other Frequency Sets " and Selected
Custom Frequency Reads from:
/sdcard/setcpu.txt
/system/sd/setcpu.txt
/data/local/setcpu
Sort Speeds in kHz, Separated by comma, from lowest to highest.
21 - Allowed Root Access.. and I did not Touch one setting in SetCPU. I went to advanced and selected "Apply"
22 - I then went to INFO in SetCPU .. If I run a Short Bench.. I score between 220 - 250.. avg sometimes it spikes.. Long Bench is 519..
23 - Rebooted .. Ran Quadrant again I am only scoring max 1080ish.. Lowest I have seen is 800.. It is all over the place.. and no where close to 1750 that erik is getting..
24 - I also Ran LINPACK and my max on a single thread was 38 .. and on multi-thread it was 32...
I don't understand What I am missing or doing wrong.. Maybe I have spent too much time on it in the past few days flashing and re flashing and yada yada that i'm just in need of a good break and then go back at it.. but my roomie who has the other X10 that I converted her to from the Iphone is also doing the same where it's not scoring to great..
I also am running into issues on her phone where it's having lots of force closes and freezing....I was just doing a quad benchmark on it now and it only scored 600??? I did the exact same.. back to flashing 2.1.. all the exact steps I have taken on my phone.. the only difference is she only has a 2gb sd card so I have not installed Link2SD on her phone.. But I have been told that should not make too much of a difference.. have i been mislead? Please assist. I am VERY lost and starting to get cheesed .. I just want what Erick has LOL But Really I converted her from Apple to Droid because she used my phone when I had one of Erick's first GB Roms and it was running fast.. she was very impressed and happy..
.. OK As I was typing this out I'm playing around with the phones and I just got a new msg on BOTH phones remember one is Link2SD one is Not.. " Could not read SetCPU Custom Config. Reverting to Defaults. Is your SDCard unmounted from the PC? .. Both phones are not plugged in .. I did a remount in storage settings.. Same error.. But If I do a device selection again.. it reads the SD Card SetCPU.txt files.. WOW . I am so confused. PLEASE ASSIST!!!!
I really hope there is enough information here.. ask me for anything or to do anything on it and i'll send it and give it a shot ! Thanks in advanced everyone! and thanks again Erick for the sick ROM!
Wow.. Another Patch! Updating to 3.3f.zip.. Will report back if any change in performance! no change.. now I just have the Sony Setup Menu start everytime my phone boots.. if i clear advanced cache in xrecovery all my sync accounts get deleted.. and I also had to downgrade my market because it was just crashing.. I also have problems with swype .. it keeps crashing in chomp.l never had problems like that until 3.3f update. ... thou I just talked to Janessa and she said her phone is groovy like the 70's.. LOL I don't understand.. She was having the problems...now I am! LOL Let's get some input going! Thanks again Everyone! AKA ERICKWILL!!
Thanks again erick!!
bump?
Sent from my X10i using XDA App
Hey man, don't bother with scores and numbers.
Flash the patch, let it settle for some hours and use it.
I just flashed the new 3.7 patch few minutes ago and waiting for it to settle.
I didn't read the EDIT.
My x10i got really slow booting and annoying when It gets too low space in sdcard.
Take a look at her sdcard.
For the FC's, I often have them when I flash a new patch. After I done everything in link2sd (relink, reboot, etc), I reboot again and fix permissions at xrecovery. Them I reinstall all apps that are FC using the link2sd interface.
As I said, I just patched to 3.7f and got two FC at launcher startup. This time was App Brain Market and Battery Widget Pro. Reinstalled them using the option "reinstall" inside link2sd and everything is OK now.
Yesterday I patched to 3.3 and got a different FC from today. Total Recall was FC at startup, them I went to link2sd and reinstalled it. It's working fine since them.
any error flashing the 3.7f patch? mine says error at line 12
I had no erros here.
My x10 was running the lastest rom with 3.3f.
Deleted scriptz folder, rebooted, cleaned dalvik cache and flashed.
Booted, went to link2sd, reboot again for mount the 2nd partition.
Booted again, link2sd, relinked dalvik, reboot.
Fixed permissions, reboot. Reinstalled 2 apps that were fc and its stable for now.
i cannot find the scriptz folder on my sdcard? ??!
Which file explorer are you using? I think if you can't see it's because it doesn't exist.
To be sure, connect your phone using USB cable and enable USB mounting to access sdcard from your PC. If you still can't see this way, it surely does not exist in your sdcard.
Go to xrecovery, wipe dalvik cache and flash the patch.
no error.. mm if u did I think u need to start all over from 2.1 again..
ok trying to flash 2.1 again.. still cant see it through my pc.. tnxx
still a fail T_T... there is still no scriptz folder.. and still with the same error flashing 3.7f patch woo
I flashed both phones with FlashTool 3.0.0 -
Rom - X10a_2.1update1_r2.1.A.0.435_Generic.ftf
Root IT / Reboot
Xrecovery Install. - I select the first one , so the one w/out GB in the name.
Copy Files to SD Card for GB Flash..Files I copy are..
" X10x.3.0.1.G.0.75.EWJET.xKernel.GB.x2.3ex.zip "
" ewX.xKernel.gb.X3.1f.zip "
I also have a folder "Addons" that I have a couple things like.. " SEMC.Calculator.zip & "SEMC.Gmail.Gtalk.Email.zip" ..so on..
I then Reboot the phone into Xrecovery...
1 - Wipe user data
2 - clear cache
3 - advanced options - clear cache again..
4 - Install Custom Zip....Select " X10x.3.0.1.G.0.75.EWJET.xKernel.GB.x2.3ex.zip "... Done
5 - Reboot Via XRecovery and Remove battery Instantly
6 - Flash via FlashTool - X10i_3.0.1.G.0.75_only kernel_baseband.ftf
7 - Unplug / Remove battery . Wait 10 Seconds.. Boot phone.
8 - Phones Booted.. My SD Card already was in 2 FAT32 Partitions. One 14GB one 1GB..
9 - Proceed to Link2SD App..Start it.. Reboot Phone..
10- Selected and Linked Apps in Link2SD .. Rebooted Phone..
11 - Started Link2SD ...go to " More " .. Selected link dalvik-cache files... Rebooted Phone
12 - Used File Explorer .. went to SDCard.. if there is a Scriptz folder Delete it.. there was no scriptz folder..
13 - Rebooted Phone.. Enter in Xrecovery mode.. Advanced options .. "Wipe dalvik cache"
14 - Install Custom Zip..Select " ewX.xKernel.gb.X3.1f.zip "... Done...
15 - Rebooted Via Xrecovery
16 - Started Link2SD... go to " More " .. Select "Link dalvik-cache files" again and then "Market Fix"
17 - Rebooted Phone again.
18 - Used phone.. Setup Google Accounts / Email / Facebook / A few apps / synced picasa photos... Rebooted
Get all the files you need for the 2.1 flash and the baseband fix if you need for 2.1 flash from http://forum.xda-developers.com/showthread.php?t=920746 .. the links are in the first post. and one again also remember to use the "Flash" button in flashtool to flash the TFT files. there is no other way to do this but I am just assuming maybe you are flashing custom zips via xrecovery...I hope this helps.. I'm going to have time this week to do a remake of the video on Ericks Firmware install.. It's ok but it's assuming to much little steps.
Hello.
I have recently installed cyanogen mod 7 on my photon 4g. Whenever I reboot my android system force closes almost everytime. What could have caused the problem?
Thank you!
If it was your first time flashing to CM7 did you fully wipe your phone before flashing if not then I would start with that. Here is a copy paste of instructions for fresh install credits to cougarcougar.
Installation:
*ADDED NOTES : MUST be rooted, Unlocked bootloader, and Clockwordmod Recovery http://forum.xda-developers.com/show....php?t=1218417
* Boot into CWM recovery
* For a fresh install, wipe data and cache, then in mounts format system.
* Flash my latest build, then flash gapps, reboot.
* skip activation if you get it asking for a sliding keyboard, then just sign in under market or settings > accounts.
* to get sdcard working, in settings > cm settings > application .. change to internal and choose install location. then reboot.
* To get the external Sdcard recognized in apps. See post http://forum.xda-developers.com/show...&postcount=318
* If coming from other CM7 builds.... I installed over Cybik's last build with a wiped cache and formatted system. And flashed gapps
I had the same problem once. Realized it was being caused by an app I had that started on boot. It was LCD display. Try checking your apps if reflashing doesn't work.
Sent from my MB855 using XDA
Hi everyone,
Since two days there is a really strange issue going on with my dell streak when ever i am trying to edit any contact or view them the "Sorry! the process android.process.acore has stopped unexpectedly. Please try again." and only option of Force close is provided this begun while i had PCM7 on my DS5 however i exactly dunno the root cause....the things which i have done in the last week was...i had formatted my SD card with ntfs as i had to transfer files more then 4 Gb by connecting my phone with lappy with enabled usb debugging but later it came to my notice that DS5 galary or the 3D galary coming with the ROM aint support the ntfs file system as it wasnt pullin up any images infact it was saying "No memory card inserted"
hence, after which i again reformatted my sd card to FAT32 and copied down all the data as it was originally and later on when i tired editing any contact or for the fact opening certain contacts this error message comes up.I thought its sum conflict with the ROM thus reverted back to Longhorn 2.9.3 final and yet the issue persists.
As i checked on xda forum and other forums too...have tried clearing the contact data, the contact storage data and also the Google service framework data after which i rebooted the device and yet the issue still persists.Basically now if i try creating,editing,viewing contacts this error message pops up.
Please can anyone gemme a helping hand in this issue.
Regards,
Amer.
i'm not expert, so i can only suggest you to :
- start fresh, wipe everthing, fix all permission, (try with other rom if stil persist)
OR
- try boot without SDcard
Sent from my Dell Streak 5
Powered by INDOSAT
arryhariyadi said:
i'm not expert, so i can only suggest you to :
- start fresh, wipe everthing, fix all permission, (try with other rom if stil persist)
OR
- try boot without SDcard
Sent from my Dell Streak 5
Powered by INDOSAT
Click to expand...
Click to collapse
Could you please tell me what does "fix all permission" mean...?
i had done wipe delvick cache and wipe cache partions and system format from the StreakMod recovery menu before the new installation of the Longhorn 2.9.3 final...i dint restored the back up and after the installation as adviced in the article i had done a factory reset from streakMod recovery menu and then a factory reset from the Dell streak Menu.
Please suggest me furthur.
Regards,
Amer.
it's in recovery menu.
already wipe all but still have this issue...? how about turn it on without sdcard?
maybe its internal sd problem, maybe.
try flash stock rom or DSC first.
Sent from my Dell Streak 5
Powered by INDOSAT
arryhariyadi said:
it's in recovery menu.
already wipe all but still have this issue...? how about turn it on without sdcard?
maybe its internal sd problem, maybe.
try flash stock rom or DSC first.
Sent from my Dell Streak 5
Powered by INDOSAT
Click to expand...
Click to collapse
i think it must be related to the recent update of google play... and anything related...
i thought i am the only one that got the problem... lol
the problem occurs when it tries to access google account in the phone...
so, for the workaround .. i dont use stock.. instead i use GO Contacts Ex as defaults...
hope this helps... for the time being until a true fix is available...
arryhariyadi said:
it's in recovery menu.
already wipe all but still have this issue...? how about turn it on without sdcard?
maybe its internal sd problem, maybe.
try flash stock rom or DSC first.
Sent from my Dell Streak 5
Powered by INDOSAT
Click to expand...
Click to collapse
I tried rebooting without Sd card aswell and yet its the same...Please temme how to reset the permissions...will try that because i couldnt find any option in StreakMod menu...how to go into recovery menu please advice me.
arryhariyadi said:
it's in recovery menu.
already wipe all but still have this issue...? how about turn it on without sdcard?
maybe its internal sd problem, maybe.
try flash stock rom or DSC first.
Sent from my Dell Streak 5
Powered by INDOSAT
Click to expand...
Click to collapse
I tried fixing permissions too....and yet its the same....
Resolved...!
Hi Folks,
I come bearing good news...the issue is resolved...This morning i decided to reflash the Longhorn 2.9.3 ROM but before which i wanted to try sumthing.....i Booted into the streakMod menu and wipe data/factory reset from that menu and then let the device reboot then i booted into dell recovery menu and did a Dell factory reset and then reinstalled all the apps so far i have funneled down to the resolutions that the whats app version 3.1.36(669520-74) is causing the android.process.acore to crash.Once i installed the application from google play store the issue seems to be resolved.
This helped for me.....and also a issue with the LED notifications of longhorn 2.9.3 final just through root browser go into /system/etc/init.streak.post_boot.sh and view the file in the RB Text Editor.
After the file opens just save it....without making any changes as the # wouldnt be present in the led notification lines and reboot....the notification would be working .
Hope it helps and your doing it on your own risk.
Thank you to arryhariyadi and deysmacro for your valued time and advices really appreciate it.
Regards,
Amer
I had this error as well on Longhorn and unfortunately I was messing about with clearing the data of contacts, google play services, deleting contacts.db file it just made things worse.
Had to do a complete wipe and reflash and it seems to be fine now on DSC 2.3.
mamoid said:
so far i have funneled down to the resolutions that the whats app version 3.1.36(669520-74) is causing the android.process.acore to crash.Once i installed the application from google play store the issue seems to be resolved.
Click to expand...
Click to collapse
nice.. i am using whatsapp too.. there is our culprit caught red-handed
Ok so. Yesterday I was testing around some new games. When I installed a shooter game that I found Panda Mobile Security recognized it as a generic virus so I uninstalled the app just like the antivirus told me to. Then after some time playing the other games I had found I noticed that most of the UI sounds were not working.(like when i tap somewhere the usual "tick" doesn't hear or when I type my PIN in the reboot I dont hear the "tick" either. So I tried to reboot hoping that would fix it but it didn't help me at all. At last I decided to reflash my ROM without wipes and I was sure that was gonna fix that. After reflashing my ROM again, wiping cache, dalvik cache and fixing permissions nothing happened at all. Then I tried wiping only /data in CWM and wiping cache, dalvik cache and fixing permissions and thus time when I rebooted the sound was back!!!! So the "file" causing this problem is in /data. Any suggestions? Help please
I think I should also mention that the other sounds(like in games and music) is perfectly fine and I'm running CM9 4.0.4.