Related
Hi Sergei !
I use DSC from beginning. It is the best ROM.
I just wt to ask
Until now I already update .64b. I have no problem with all troubles such as wifi,reboot,camera...
Which kernel I should install? the original with upd0.64b or DSC_teamXX or GXkernel...
Bz i got confused about many of kernel
I need stability and long life battery for normal using.
Anyway thank a lot for the DSC rom from yr team
Appreciated that
Larry
For 0.64b I used the kernel that was provided. Prior to that I used GKernel 1.5, since I never had any luck with using the GXKernels on my device.
Good day to you!
Stable kernel is always included in our ROM.
We provide and test different kernels, but only tested and stable version goes into release.
First of all.....
Like many of us, we just wanted a solid/stable custom ROM and I couldn't be more grateful for the fine work Greg and _n0p_ are/have been doing.
I love DSC above the rest, but I too have the Wifi freezes, and have them with nearly all GB-based ROMs.
However, when I first went to GB from DJ_Steve, I didn't have Wifi issues. Unfortunately, everything else went wrong, so I searched for a better ROM. Ultimately, I installed Longhorn, with the BB and kernal. At that point, I started seeing Wifi troubles. After that point, every GB-based ROM gave me wifi freezes.
I've been following and installing the DSC updates as you release them, and each time, the freezes come back.
Each time, I go back and re-flash the GXkernal1.0, and all seems right. I may get a freeze on that kernal at some point, but I haven't had one yet. The other kernal updates gave me freezes within a few hours of installation.
Sorry for the tome, but suffice it to say, IMHO, GXkernal1.0 has been the stablest kernal for me.
Thank you. You gave a new idea.
Hi Sergei,
Good news!
I am using DSC0.64b+kernel 2.6.35-14-DSC-Team-Phoenix+ from yesterday until now. So far it is fantastic. I have no FC, no reboot, no prbl with wifi...
I were supprised why many people get wifi prbl.
Anyway thank u and yr team for DSC.
Yes, I have the DSC-Team-Phoenix kernal in right now. Installed this morning, got a wifi freeze a couple hours later, but battery too low to flash back to GXKernal1.0. So far so good on Phoenix. I'll reflash GXKernal1.0 later when/if I get another wifi freeze.
But yes, got wifi freeze on Phoenix too.
Hi _n0p_,
I saw in yr build.prop has 1 line:
#wifi.supplicant_scan_interval=120 instead of wifi.supplicant_scan_interval=120
might be it cause of wifi problem?
When I change that line, i have no problem at all with all yr DSC roms.
Sorry if that is wrong.
Larry
Good morning everyone
Seems to be that my GSII has serious issues running his stock rom (continuous reboots, not-working 3g etc.). I tried several factory resets, but nothing worked 100% . CM fixes some of my problems, but the only full-working custom rom is MIUI, that seems to be stable and very neat. Despite that I still prefer the custom rom (yes I'm probably insane), or a more traditional one like CM and I really would like to understand what kind of problems can generate such a massive amount of errors and reboots.
Could be a hardware problem? MIUI works fine, I can't explain why I still got problems with other ROMs.
Sorry for my bad English, thanks in advance
Without telling us the version of the stock rom you are using, we can never give you any answers.
I'm currently using
2.6.35.7-I9100XWKDD-CL161513 [email protected] #2 Kernel
Gingerbread.xwkj3 Build
That's not the original stock ROM, just one I found (here on xda I guess...)
Is there some kind of hardware-check I can run by myself, just for exclude manifacturing defects?
if you want to check to exclude hardware defects, u could go to the dialer and press *#0*# .. it will give u a list of tests which allows u to pinpoint any hardware defects ( if it exists) .... but if the problem is with the 3g, you could reflash your modem..
Initial problems were strictly connected with 3g's use, after a few hours of use i've noticed slowdowns using sms, then it started crashing and random rebooting. That's the same reason why I initially switched from original ROM to CM. I mean, I know that Samsung's ROM is not the best one at all, but I can't figure why it's so instable on my device.
fra beone said:
I'm currently using
2.6.35.7-I9100XWKDD-CL161513 [email protected] #2 Kernel
Gingerbread.xwkj3 Build
That's not the original stock ROM, just one I found (here on xda I guess...)
Is there some kind of hardware-check I can run by myself, just for exclude manifacturing defects?
Click to expand...
Click to collapse
As that the oldest stock rom try a newer one .
jje
Updating: now my GSII works with latest stable Cyanogen, except for the 3g that's still not working. Should I reflash modem, as suggested by roophz?
That old kernel is known to cause random reboots.
Update to a newer stock rom.
Sent from my GT-I9100 using Tapatalk
Update 2: I switched from the old stock rom to the latest cyanogen stable version, then to a newer stock rom and then back to MIUI again. Still no life signals from 3g.
How is that possible?
people who call me can not hear me
i have a samsung gt i5500 , but my microphone is so low
you have an idea for resolving this problems?
thanks
Are you using CM 20120206 [v2.0] ?
I had to downgrade to 1.9 because i was having the same problem.
BTW, i couldn´t apply the hotfix cuz i got a "currupt zip" error.
Holà boyz..
the microphone issues was dued to a psyche error; he soon provide a fix and after few hours a second fix, both into the same day of the 2.0 release..
The problem some users reported with the Corrupted file or in general with download not success with the hotfix was that the files were still without signature or its were not already materially available on the server.. that's why psyche told everybody to wait some time before try to download and flash the hotfix..
So now you should all have no prob..
P.S.: remember that if you didn't yet install any hotfix, you have to flash directly the hotfix2, nor the 1 and than the 2..
Thanks for the help!
I was able to download the hotfix now, thru the link you provided, so i´ll just try again.
what you mean about the CM 20120206 [v2.0] is the ROM ? i already try the Firmware android 2.1 eclair but the problems is the same, i use the MAD ROM to, but the problems is the same, the person who call me can not hear me
about the hotfix how to flash directly the hotfix2?
thanks
i use froyo 2.2 , and i try the MAD ROM , but i have the same problems, i try to modifier parametre in the service mode *#..... but i can't understand :s :s :s :s :s
Yes, i´m using the latest Cyanogen mod, you can find it here:
http://forum.xda-developers.com/showthread.php?t=1149110
thank my friend, i downloading now the ROM, you have the same probleme as me? and this ROM fixe that?
I did not find the latest version Cyanogen mod, I find only HOTFIX 3 in this URL,
please if you have the url for downloading the latest version CM give it to me,
salinawfal said:
thank my friend, i downloading now the ROM, you have the same probleme as me? and this ROM fixe that?
Click to expand...
Click to collapse
sorry, my fault!!
I assume you was using the last CyanogenMod rom!! But I'm sure you could understand my - our - error, 'cause you don't say exactly what you was using and much of all because just the day you was writing your post it was released the version 2.0 of the Cyanogenmod porting for our phone - and it had an issue with the microphone!!!
It's incredible, isn't it??
So that's why we confused!!
Anyway, the problem you encountered with Android 2.1 and 2.2 it's really strange: indeed it's first time I hear about mic issues with stock rom..
Anyway, what I am asking now is: did you was able to use the mic beforen you had the problem or from the moment you buy you always had this problem??
I mean: could be an hardware error? Could be it an hardware broken problem?
the person calling me hears me only if I activate the loudspeakers, and this is often not practical because everyone hears me, but in the combined mode the person calling me can not hear me this is why I think c a software problem, I tried to change the parameters of service mode but without results,
what should I do?
the person calling me hears me only if I activate the loudspeakers, and this is often not practical because everyone hears me, but in the combined mode the person calling me can not hear me this is why I think c a software problem, I tried to change the parameters of service mode but without results,
what should I do?
i find this
http://droidtricks.blogspot.com/2011/09/how-to-increase-or-boost-low-microphone.html
but the menu is not the same as samsung gt i5500
you have an idea how increase microphone in gt i5500?
thanks for your answer my friend
salinawfal said:
the person calling me hears me only if I activate the loudspeakers, and this is often not practical because everyone hears me, but in the combined mode the person calling me can not hear me this is why I think c a software problem, I tried to change the parameters of service mode but without results,
what should I do?
Click to expand...
Click to collapse
to me it sound very very strange..
Actually what rom are you using?
did you had the issues with all others rom you tried?
are you experiencend ths issue from the first time you bought the phone?
hi,
Now I use a ROM original "I5500XXKJ3_I5500XXKJ3_I5500XXTIMKJ3_HOME" compatible with KIES,
for the first time it was normal, but when I flash another ROM I have this problem, I tried several ROM for fix the problem but without result, I even returned a 2.1 eclair but without result,
Now I put an original ROM but still the same problem,
the microphone is activated only when I activate the loudspeakers during the call, and also for recording a sound it is sooooo low, you hear nothing
this is the first time I meet a problem with the microphone of my mobile
you have an idea how change the parametre in the menu *#*#197328640#*#*
i choose Audio but i understn nothing, the parametre is in decibel
my menu look like this
i choose Audio and he give me :
[1]HANDSET
[2]HEADSET
[3]SPEAKER
[4]BT HEADSET
[5]3POLE HS
[6]REBUILD ALL
[7]TTY MODE SET
[8]MAX8899 AMP
i fond this but the menu is not the same as samsung gt i5500
http://www.ctrlplusz.com/2011/06/fi...msung-galaxy-s-ii/comment-page-1/#comment-162
I had the exact same problem; when I received or made a call, the opposite end could not hear me at all. It was the same with normal call, speaker on and with bluetooth car set - no outgoing audio.
I tried "update-cm-7-20120206-MADTEAM-galaxy5.zip" with and without hotfix2.
When I did a quick downgrade to 7.1.0 ("update-cm-7.1.0-galaxy5-v1.7.2-MADTEAM-signed.zip") everything works OK.
Anyone give me a quick info on what release / hotfix should work at the moment?
i try several ROM ,android 2.1 eclair , 2.2 froyo MAD ROM , CMode7... but no result,i have the same problems, i think we must change something in the service menu
help us please
i have samsung GT I5500
Oh, and if it matters any - when I installed the above said ROM did a complete wipe of data/caches (previous ROM was Samsung's orignal) and the baseband is "I5500XWJP4".
The new version is downloaded with RomManager.
But if you go to the last page of the topic, you can find the download links.
Hi XDA
I have not been able to use my mic since the leaked flash LSJ. If phone is on speaker the 2nd mic works and also if i plug my headset, i can make calls. I have heard this is because of the modem even after flashing the LS6 modem from JB leak or the famous LQ6, it is not solving the problem. I reverted back to 4.0.4 to check if my phone has became faulty but its not.
Any sort of help will be appreciated.
Thanks and regards
I never faced this problem with any other rom from Neme77 before and quite honestly since using his roms I never flashed any other either cuz indeed for me his roms are the best
still no one there to help me out
Hello friends.
I am new to this wonderful community and very happy to be a part of it.
I am facing a very strange problem. I am trying to update my WT9i Live with walkman from Gingerbread to Ice cream sandwich. Problem is .. whenever I flash an ICS rom my touch doesn't work !! Everything else works fine (physical keys / network / audio). Then if I install GB rom again it works flawlessly.
I have unlocked bootloader.
I am using Flashtool to flash stock roms.
* WT19i_4.0.2.A.0.58_(1254-1868).ftf = works
* WT19i_4.0.2.A.0.62_(1254-1889).ftf = works
* WT19i_4.1.B.0.431_Generic.ftf = touch doesn't respond
* WT19i_4.1.B.0.587_Generic.ftf = touch doesn't respond
* WT19i_4.1.B.0.587_CUSTOMIZED CE3 WORLD I 1254-1889.ftf = touch doesn't respond
I have no idea what could be the reason. Any GB roms works smoothly. Any ICS roms bricks the touch screen. I have tried custom kernel (mesa .. kappa) and many custom ICS rom .. same problem. But at any moment I flash GB rom .. everything works.
I did all the research I could (for last 4 days) and read many threads .. tried many things. Nothing helped.
Please help me! Please Please Please.
I have seen many threads with problem "touch does't work because of flashing wrong rom or kernel".
I don't think that's my case. Because whenever I flash a stock GB rom .. it works just fine. Problem happens with ICS roms .. custom or stock.
I am going to try some custom GB rom with custom kernel. I'll post if that works.
This thread is most likely my last hope of finding a solution .. please help!
Just out of curiosity downloaded the 587 ICS generic rom from flasstool website then flashes it .. same touch problem.
Now downloading latest Nightly CM10 coconut. I'll try it. CM 9.1 stable did not worked .. same touch problem.
Please Help ! I dont see a clue ! Why ICS roms would freeze my touch when everything else works? I am on the verge of throwing my phone out of window !!!
Latest CM10 Nightly build = same problem .. touch screen is not working.
Flashed Stock GB = everything is fine !
:crying::crying::crying::crying::crying:
Now I am downloading every regional roms of stock ICS .. its all I can think of.
I know its a very old phone and update / development for it completely stopped. Its forgotten. Still I love this little cute handset and I would love to get ICS on it (for app support .. many app do not work on GB .. like google chrome).
So please help !
Hello there!
Quick question: has your LWW ever been repaired? Like, had it's touch digitizer replaced or manipulated in any way?
I know some replacement parts can conflict with non-stock (or "comes-out-of-the-box" to be precise) software. I bought a replacement display for my Mini Pro and it would just freeze on CM10.1 but worked (kinda) on stock ICS.
And yeah, it's and old phone, but a good one. Development for it and it's 2011 brothers has clearly slowed down but has absolutely not stopped
Pixelado said:
Hello there!
Quick question: has your LWW ever been repaired? Like, had it's touch digitizer replaced or manipulated in any way?
I know some replacement parts can conflict with non-stock (or "comes-out-of-the-box" to be precise) software. I bought a replacement display for my Mini Pro and it would just freeze on CM10.1 but worked (kinda) on stock ICS.
And yeah, it's and old phone, but a good one. Development for it and it's 2011 brothers has clearly slowed down but has absolutely not stopped
Click to expand...
Click to collapse
Hello. Thank you for replying. Its a second hand phone .. my brother purchased it from a friend then gave it to me. So it may have a replaced display or digitizer. I just checked with my brother and he said his friend never repaired the phone.
So GB and ICS use different digitizer drivers? Is it possible to use GB touch drivers with ICS?
No idea. Your problem is truly rare haha.
I'm out of ideas here, most of the time flashing a stock ftf does the trick, but not here.
if I were you, i'd sell that phone to someone who woulndn't care about software updates hehe.
Hello Friends.
I am posting this in case someone else face the same problem and find this thread. In my opinion ..this is a very rare and strange problem.
This problem should never happen with an original handset.
If your touch only works with Gingerbread stock roms and even after complete wipe other stock roms freeze your touch .. then you can be sure that your touch was replaced with a cheap one. Go to a servicing center and replace it with a good touch or sell the phone to someone else who doesn't care about updates.
I went to a servicing center today and replaced my touch. Now it works smoothly with stock ICS rom. I am sure it will work with CM too. It costed me around 25$.
1 tip to recognize low quality touch. Low quality touch will not have transparent bottom-left and bottom-right button. You wont be able to see the key lights through it. Good quality touch will have transparent button. Another warning .. after market touch is most probably not scratch resistant like the original touch .. so you may want to use a good screen protector (plastic film) on it.
This is not only for WT19i. Whenever you buy a secondhand set .. make sure its touch wasn't replaced and best to check if its upgraded and working properly.
Thanks to "Pixelado" for hinting me about the replaced touch issue. Then it made sense to me .. there was no other logical reason for the stock rom not working.
I am very happy with my upgraded ICS But kinda sad about the money loss ! Anyway loss is loss. This is a good handset and I hope it will serve me good. Now looking for a way to root it.
i'm always more than glad to help
Now, on the rooting issue, I strongly recommend unlocking your bootloader and flashing a pre-rooted kernel. Why, you ask? Well, you'll find out eventually
Custom kernels often pack a bunch of optimizations and the ability to overclock. I strongly recommend Rage kernel for stock ICS. Once you flash it, i'll take care of rooting your phone on first boot. If you're not able to unlock your bootloader/don't feel comfortable flashing kernels, rooting by exploits is your only choice.
By the way, I strongly suggest giving LegacyXperia CM10.1 a try. Its awesome
Pixelado said:
i'm always more than glad to help
Now, on the rooting issue, I strongly recommend unlocking your bootloader and flashing a pre-rooted kernel. Why, you ask? Well, you'll find out eventually
Custom kernels often pack a bunch of optimizations and the ability to overclock. I strongly recommend Rage kernel for stock ICS. Once you flash it, i'll take care of rooting your phone on first boot. If you're not able to unlock your bootloader/don't feel comfortable flashing kernels, rooting by exploits is your only choice.
By the way, I strongly suggest giving LegacyXperia CM10.1 a try. Its awesome
Click to expand...
Click to collapse
Thanks a lot Pixelado. I have unlocked bootloader and using mesa kernel 4.8. Would Rage 3.2 would be better than Mesa?
I'll try LegacyXperia CM10.1 .. appreciate the recommendation.
I've never tried mesa, so no comment there. Quie frankly, rage 3.2 seemed to be all i ever needed when using a stock rom. I tried lupus, but stopped using it when they switched from CWM to TWRP.
Angelina7 said:
Thanks a lot Pixelado. I have unlocked bootloader and using mesa kernel 4.8. Would Rage 3.2 would be better than Mesa?
I'll try LegacyXperia CM10.1 .. appreciate the recommendation.
Click to expand...
Click to collapse
i have same problem too
can u solve this problem?