Related
Hi people,
I got a problem with my hd2.. I was trying to flash it, but now i think i ****ed it up!..
First of all i did the HSPL thing.. And then i was trying to flash it with the original update 1.66 flash..
My mobile was saying that it was not allowed!
Now everytime i start my phone you get the bootloader with the message:
PB81100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Updrade ROM code error Please try again!..
I dont know what to do right now
Please help!
and if i try a custom rom.. it says loading... all the time?
Is there someone who can help me?
Did you tray a method with SD card?
First of all you have to format a memory card to FAT32. Then put there a image of original rom. Do do so you need download stock rom from HTC and extract it. There you find a *.nbh file, the largest one. Rename it to LEOIMG.nbh and copy to your SD card.
After that put it into a phone, an enter the bootloader mode. You have to press and hold volume down key. That's all. All you need now is to follow instructions which will be displayed on screen of your phone.
yes i did.. but ill tried the original rom:
RUU_Leo_HTC_NLD_1.43.404.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
But that one is saying: Not allowed :|
you are not the first one this happened to.
look here
http://forum.xda-developers.com/showthread.php?t=618084
here
http://forum.xda-developers.com/showthread.php?t=631276
here
http://forum.xda-developers.com/showthread.php?t=631053
it looks like hspl is not installed on your device with the line SPL-1.66.0000 XE on the screen. it should read SPL-1.42.HSPL XE when it is hsplled. flash the original shipped rom again from bootloader with a goldcard or reflash the hspl
redownload your rom as it might be corruped and causing a bad flash
especially look in the firstlink i gave you.
you have tried to flash 1.66 this is a WWE or ITArom. your device is not hspl-ed so it will not accept a dutch rom. you need a goldcard to flash a dutch rom again or try to reflash a stock WWe rom.
If you are Dutch or using NLD (or equavalent)
Get the official (from htc) ROM, rename the EXTENSION to .ZIP an/or open it with Winrar.
There is a .nbh file in it, wich you need to extract to (for example) your desktop.
Rename it to LEOIMG.nbh and put it on your MicroSD (wich MUST be formateed FAT32)
Put your microSD in the phone.
Start your phone in the BOOTLOADER (keep VOLDOWN pressed and shortly press POWER .. while keeping the voldown button)
Follow the instructions on screen.
Wait till all the options say OKE, even if your phone goes running trough the room, dont click anything!
(you will see some explanation marks and reboots, this is normal).
After you should have flashed SPL 1.66 and able to boot the official ROM.
But the problem is.. All the original roms doesnt work.. They Say "00028002 Not allowed"
The ROM error is because you try to downgrade 1.66 to 1.48, wich is (i think), not allowed, and would answer my own qeustion.
have you tried the goldcard method? if there is a language restriction somewhere this will solve this
I dont understand that goldcard methode.. or.. i cant find how i can do that :$
have never needed itmyself but look here
http://forum.xda-developers.com/showthread.php?t=591239&highlight=goldcard
How can i make a goldcard without a cellphone who can start? :O
same here....
my hd2 successfully hspled... ( 4 mounths ago)
after that i try to install official 3.14.405.2 Rom...
in installing progress i see a error and after restart say: software update failed please try again
now my spl is 3.03
and task29 and hspl 1 and 2 and 3 and any orginal roms NOT installed in my htc hd2...
plz help! :-D i really really confused
tighoor said:
same here....
my hd2 successfully hspled... ( 4 mounths ago)
after that i try to install official 3.14.405.2 Rom...
in installing progress i see a error and after restart say: software update failed please try again
now my spl is 3.03
and task29 and hspl 1 and 2 and 3 and any orginal roms NOT installed in my htc hd2...
plz help! :-D i really really confused
Click to expand...
Click to collapse
You need to remove SPL 3.03!!
Only way to remove is to flash stock rom over SD!
kurt-willems said:
You need to remove SPL 3.03!!
Only way to remove is to flash stock rom over SD!
Click to expand...
Click to collapse
i tried it... but not installed from sd :-S hahaha! now i have bricked hd2. who buy it?
maybe cotulla should make a new hspl that support 3.03 . true?
Same here,flashing stock ROM from the SD Card doesnt help,the SPL 3.03 is there wont let me pass through,we need a new HSPL or else throw the Phone into the garbage can and get a NOKIA.!!
now i understand this is a problem for many users... i find 3 others users that have this problem (in iranians forum)...
My problem too!
Hi guys!
I'm sure that my friends in xda can solve this puzzle soon!
I did every thing you think.
after flashing some coocked roms (last of them was dexter the dark one) I decided to flash an original,official rom - because I heared that many problems resolved in it - and it was the 3.14.405.2 version that I found direct download link here! I extracted the .nbh file and renamed it to leoimg.nbh and coppied it into my FAT32 formatted sandisk SD 8GB class2 ram and I held voldown btn and pressed pwr to enter rainbow screen, flashing started but it froze at 10 or 15 % . after this I tested many ways from xda and other helpers but my phone showed these screens:
if I just power it on:
grey danger triangle
Software update failed.
Please try again.
and if i hold voldown and press pwr:
in rainbow screen:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I try to flash any ROMs(in this case 3.14.405.2 official rom)
1)with usb cable : continues to 1% and show in pc:
ERROR [262] : UPDATE ERROR
The ROM Update Utility has encountered communications error during the update process. The program will guiade you step-bye-step to recover from the errors so you can continue with the update.
"I DID RECOVERY IT WASN'T SUITABLE"
2)with SD card : whether I use rainbow screen or just pwr on my device , it
automatically start flashing and at the start it shows Loading... and in some cases it froze at this level and in other cases it shows this error:
00028002
not allow
And now my spl is 3.03 so HSPL can't do anything!(as I tested it)
tnx for your replies!!!
excuesme because of very low quality pics!
EDITED:
I did task29 too,
my phone couldn't do task29 and it froze at the beginning of the operation
it did not any changes;
mmsoftonline said:
Hi guys!
I'm sure that my friends in xda can solve this puzzle soon!
I did every thing you think.
after flashing some coocked roms (last of them was dexter the dark one) I decided to flash an original,official rom - because I heared that many problems resolved in it - and it was the 3.14.405.2 version that I found direct download link here! I extracted the .nbh file and renamed it to leoimg.nbh and coppied it into my FAT32 formatted sandisk SD 8GB class2 ram and I held voldown btn and pressed pwr to enter rainbow screen, flashing started but it froze at 10 or 15 % . after this I tested many ways from xda and other helpers but my phone showed these screens:
if I just power it on:
grey danger triangle
Software update failed.
Please try again.
and if i hold voldown and press pwr:
in rainbow screen:
RUUNBH
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I try to flash any ROMs(in this case 3.14.405.2 official rom)
1)with usb cable : continues to 1% and show in pc:
ERROR [262] : UPDATE ERROR
The ROM Update Utility has encountered communications error during the update process. The program will guiade you step-bye-step to recover from the errors so you can continue with the update.
"I DID RECOVERY IT WASN'T SUITABLE"
2)with SD card : whether I use rainbow screen or just pwr on my device , it
automatically start flashing and at the start it shows Loading... and in some cases it froze at this level and in other cases it shows this error:
00028002
not allow
And now my spl is 3.03 so HSPL can't do anything!(as I tested it)
tnx for your replies!!!
excuesme because of very low quality pics!
EDITED:
I did task29 too,
my phone couldn't do task29 and it froze at the beginning of the operation
it did not any changes;
Click to expand...
Click to collapse
exactly THE SAME THING
flashing to offical wont help either
I've been going through threads for some hours now but haven't round a solution, so apologies if it already exists:
I've had a problem with my HD2 freezing. It's been sat in a drawer for a while but I thought I'd try and sort it out.
So first I did task29 and that seemed to go OK.
Next I tried to install the stock Vodafone ROM. It buzzed 7 times when the update started and then stuck at 9%.
Having failed to put a ROM on it I then followed the instructions to remove HSPL. When I start it (VOL down, LEOIMG.nbh on FAT32 formatted SD card inserted) it just goes to the tricolour screen and does not flash/load whatever the nbh file.
I put the phone in the fridge for a while and re-tried the ROM update and that reported success, but it won't boot so it's back in the fridge - I'm getting worried about the battery now.
I see someone else had the same problem removing HSPL but don't know what their solution was - am I missing something?
The phone is currently sat in the fridge because I think the 7 buzzes is a heat (processor) issue so assume it's knackered anyway but I still want to remove HSPL.
[thanks for moving the thread - apologies for putting it in the wrong place to start]
UPDATE: I've now successfully updated the ROM to standard UK Vodafone but still no joy with removing HSPL. I'm using a 2GB SD card FAT32 format file names LEOIMG.nbh but I just get the coloured screen. I'm using the nbh file from the current ROM. Tricolour screen reads:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
And then 'serial' or 'USB' at the bottom changing as I plug it in.
Rather than using SD card stock flash, which contains a radio, (your symptoms are often the fault of the radio) you should try running hspl2, and setting spl 1.66.0000
I've also got personal expwrince of spl 2.x refusing to downgrade to 1.x, even when SD flashing, so radio problems aside i now remove spl/hspl 2.x using hspl2.exe and only then perform the SD flash.
Need a little help here, my mate got a HD2 off ebay, which was stuck at android loading screen. I have no idea what the original owner flashed or didnt flash. I can get into the tri-colour screen ok and it shows 3.03 spl, but refuses to change to usb from serial. How can I get access to flash something onto this that will boot?
samsamuel said:
Rather than using SD card stock flash, which contains a radio, (your symptoms are often the fault of the radio) you should try running hspl2, and setting spl 1.66.0000
I've also got personal expwrince of spl 2.x refusing to downgrade to 1.x, even when SD flashing, so radio problems aside i now remove spl/hspl 2.x using hspl2.exe and only then perform the SD flash.
Click to expand...
Click to collapse
I've not been on the forum for a while since I got the Sensation - can you point me to an hspl2 thread for the why's, wherefore's & how to's?
Thanks.
EDIT: Found it thanks.
To change the SPL you need the device in bootloader mode (tri-colour sreen) than you connect the usb cable between PC and device. in the white section of the bootloader should say USB (if usb sync drivers on the PC are ok). next you need HSPL2.exe, HSPL3.exe or HSPL4.exe from here - http://forum.xda-developers.com/showthread.php?t=611433 . depending on your current SPL/HSPL ver you'll choose one of them.
About the "It's working in the fridge" problem - sorry to hear that. It's pretty much fatal. Check out here - http://forum.xda-developers.com/showthread.php?t=982454
I just got back from repair an HD2 with the same problem, vibrating 7 times, ect., and it cannot be repaired. you need new main board but they are no longer produced, and even if you find one from china it's from 280-250 USD.
I hope it's not the same with you, but...
Well I did the HSPL2.exe thing and that was a piece of cake - HSPL now removed and ROM properly installed.
It still does the vibrate 7 times thing every now and again so it looks like it's going on ebay as junk
Note: I've seen a few similar threads with a problem like mine, but my HD2 is showing different error messages, so I thought I'd start a new thread to avoid making things worse.
---------------------------------
So I purchased a second hand HTC HD2 pretty cheap. It's the 512HD2 and it came flashed with a MIUI Android with a Samsung Galaxy S2-ish interface. Problem was, the battery got drained way too quickly, even from the most minimal usage, so I though I should flash back to the stock OS and get my problem solved so I could use the HD2 as a primary phone.
Here's what I did:
1. I followed jayceooi's tutorial.
2. I downloaded a ROM Update for HTC HD2 (3.14.405.2) from HTC's Official HD2 download page.
3. I opened up the .exe, got the .nbh, renamed it correctly, put it on the SD card and then verified it's really there with an Android file manager.
4. VolDown + PowerButton and I got to the rainbow menu thing (I know, I'm a noob and I don't know how it's called) then I let go of the keys and got to the update screen.
5. PowerButton - Update begins
6. 30 seconds later, only after about 1/4 of the bar had progressed, I got a black screen, and then a screen that says "Software update failed. Please try again". Afterwards the gray screen saying "Loading... 00028002 not allow". Finally, back to the RGB screen I got:
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
And If i try to enter the boot mode via VolDown+PowerButton I get:
RUUNBH
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Update ROM code error
Please try again
Serial
---------------------------------
Should I try a USB flash or something?
Thanks in advance.
?
Nobody?
Update:
I tried to upgrade from 3.03.0000 SPL to the 3.03.0000 HSPL via USB in the boot mode, but I got a critical error and nothing happened on the device whatsoever - same state as the post above.
Any ideas?
probably wrong stock rom used, (or did you use the phones correct serial to download the rom?)
enter bootloader (three coloured screen)
connect usb
run hspl4
choose 3.03.hspl
back into bootlaoder
connect usb
run the 3.14 rom over usb.
EDIT - just saw your edit about critical error, , ,win7 64bit? try different usb ports, and try a different pc if you have one available, , hspl can be a little picky.
samsamuel said:
just saw your edit about critical error, , ,win7 64bit? try different usb ports, and try a different pc if you have one available, , hspl can be a little picky.
Click to expand...
Click to collapse
Unfortunately I have only one laptop with a 32 bit Win7, but it's OLD and crapfull of viruses so I'm not risking any failures there.
Do you think it will be safe to HSPL over VMWare (virtual OS environment inside of windows)?
P.S.: Exact model is the HTC HD2 T8585. I checked it via an IMEI checker.
there's a very good chance that hspl wont flash from a virtual machine. (Something about not getting low enough level access to the usb or something).
samsamuel said:
there's a very good chance that hspl wont flash from a virtual machine. (Something about not getting low enough level access to the usb or something).
Click to expand...
Click to collapse
Ok, in that case I'll probably go over at a friend's house and try an HSPL there. I'll come back with some results as soon as I'm done.
Halfway done?
OK, so I got a good Windows 7 32 bit laptop and tried out HSPL4.exe by DFT. I kept my fingers crossed and, thankfully, I got to the "We hacked it! " screen.
After successfully updating and removing the USB cable, the phone rebooted with the same "Software Update Failed" message, but this time the gray screen showed the Cancel/Allow for the leoimg on the SD. I pressed the power button to attempt a flash, but I got the same issue as last time.
After that, the VolDown + PowerButton STILL showed:
SPL-3.03.0000
Since I'm not that stupid (I hope) I figured that the ROM reverts SPL and Radio to normal and that's why there was no trace of the HSPL, so I went back to the laptop to go at another 3.03.0000 HSPL. This time, after I got the "We hacked it! " screen I cancelled the ROM update and thankfully the RGB screen now reads:
P81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x40
IN SHORT - The HSPL was a success, now if you help me find the right ROM, I would owe you my life!
lol, i draw the line at advising roms, for example ive never used an android rom with sense, or a MIUI rom, and i havent used a winmo rom in about a year,, so it would be unfair of me to guide you.
ROM
Edit - Okay, thanks for all your help!
P.S.: I just ran an Task29 to get rid of the constant Software Update error at each boot and now I can boot into the RGB screen without the RUUNBH error so I think that will make things easier. I'll probably find the ROM myself or ask somewhere else.
Thanks again!!!
thanks
samsamuel said:
probably wrong stock rom used, (or did you use the phones correct serial to download the rom?)
enter bootloader (three coloured screen)
connect usb
run hspl4
choose 3.03.hspl
back into bootlaoder
connect usb
run the 3.14 rom over usb.
EDIT - just saw your edit about critical error, , ,win7 64bit? try different usb ports, and try a different pc if you have one available, , hspl can be a little picky.
Click to expand...
Click to collapse
if you were a girl I would kiss you
You saved my day. I was searching for my problem since 3 days and this has solved the problem
Finally Done!
@ParmakSokan - Hey! Looks like I'm not the only one samsamuel helped!
A little update - I finally have the phone in working condition! It is now running the stock Windows Mobile 6.5 specific for O2, since I figured out the device was purchased in the UK.
For anyone interested, I got the ROM from the official library of HD2 ROMs in 4shared, which I believe is held together thanks to xda-developers, so yeah - yet another KUDOS for that!
The HTC Sense UI is simply beautiful and I think I will actually stay with 6.5 for a few more months before considering 7.5 Mango.
P.S.: Moderators can mark the thread as solved.
Hi
I have a flashed HD2 with these problems.
In Bootloader it says
PB81100 SS-BC
SPL-208.HSPL 8G XE
0X05CotullaHSPL 0X50
If I try to install HTC RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe it breaks after 1% it says 270 error
HD2 reboots and again white Screen. When I put off/on battery and press Volume down I see bootloader display.
I tried to flash with sd Card, leoimg.nbh on the sdcard breakes after 10%
it says
00018003
LEOIMG.nbh -FAIL
Radio-Fail
I think I have a bootloader problem. How can I remove SPL-2.08.HSPL 8G XE and set the new orginal SPL ?
here bepe says :
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611433
I made it with HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
but I can't remove HSPL from my bootloader.
How can I set my bootloader back to original htc ?
the topic can be closed
this has solved my problem
http://forum.xda-developers.com/showthread.php?p=24876999#post24876999
I had installd Windows 6.5 everthing was working perfect, then I tried to install Android and clk mod now I get the same in the 1. Posting from me.
I have SPL-3.03 HSPL in the boatloader but I get allways Error 270 I can't uninstall 3.03 HSPL
does anybody have an Idea?
Radio_2.15.50.14.nbh installation fails, but custom rom like energy sucesses. After that again white screen
nobody knows the solution?
You have a stuck radio. Fairly common, with a variety of symptoms. The radio wont let itself be changed which is why custom roms and splashscreens don't have a problem.(radio gets flashed at the start of flashing which is why it always fails around 8-10%) This issue can affect spl to a greater or lesser degree, some people can change spl some can't, some find flashing an older (but correct for that phones cid and region) stock rom, some find chilling the phone allows the flash to take allowing the radio to finally change, some never get anything to flash again.
hi
thank you for your answer. My Bootloader shows
SPL-3.03.HSPL XE
0X05
0X50
if I try to run Task29 via USB Cable, I get Error 270, it breaks sometimes at 16%
reflash 3.03 HSPL with HSPL 4 says it is successfull, but if I try to flash a rom with usb again it shows 270 Error, so my logical deduction is, reflash with HSPL4 does not really flash and it gives wrong answer because others like task28 leo customRUU can't flash over usb cable. HSPL 4 says success but this answer must be fake, after reboot 3.03HSPL remains in the bootloader, I tried to downgrade to 2.08HSPL no chance,
My System is Windows XP SP3 when I connect USB Cable to my HD2 it shows USB in the bootloader but why does it break if I try to flash over USB Cable and give an error 270 ? there must be a connection problem between my laptop and HD2.
I would like to know
Is there any way to flash HSPL4 over microSD card?
Can I see which Radio Rom has been installed ?
its a bit strange
Radio Rom Radio_2.15.50.14 istallation via USB Cable fails after 4%
and via microSD Card ~96-99%
I get
00018003
what can be the reason?
ParmakSokan said:
what can be the reason?
Click to expand...
Click to collapse
as i said,. you have a radio image that isnt allowing itself to be overwritten. My name for it is 'stuck radio' and some people fgind the radio still works fine with, for example, custom roms, it just cant be changed, others find the phone always hangs on grey bootscreen, yet more find taht hspol/spl flashes seem to work but nothing changes, some find chilling it in teh freezer lets a rom flash and suddenly all is well, and yet more find the freezer trick seems to work but doesnt, and yet more try and try and try to sd card flash with their CORRECT stock rom and suddenly without warning teh flash works.
My advcie, Prepare yourself for disappointment, but keep trying,and most importantly READING there are hundreds of threads about this.
mobile radio
ParmakSokan said:
nobody knows the solution?
Click to expand...
Click to collapse
hey gys whats this radio in mobiles... have searched and searched but no ans.....
Hi xda-community,
I am new to the Smartphone- and the Windows Phone world. My main cause is to get rid of the swisscom branding of my HTC Radar. But I also would really like to test some custom ROMs - especially the Dynamics HD2O looks promising in my mind. That's why I bought all the equipment necessary for Goldcard method for 2nd Gen WP7 phones as in this manual.
My Info:
HTC Radar C110e
Model ID: PI06100
SPL – 1.8. 160015.3 (131745)
Radio-16.23.06.10
Radio Software version: 16.23.06.10_ 16.32.00.23U
FW-Rev: 1600.2200.10801.166
What I did so far:
downloaded IMG_Omega_HTC_Europe_2.05.401.01_Radio_Signed_16.23.06.10_16.32.00.23_OMEGA_RELEASE.nbh
renamed it to OMEGIMG.nbh
put it on microSD-Card
used goldcard-tool and made Goldcard of microSD card
put goldcard on one end of Y-Cable, Radar on thick end, and red end in USB port of PC, which put Radar to light
entered USB Host Mode by pressing vol down + camera (now it shows "Update in Progress" and reboots about 10 times every 10 (?) seconds...then this appears:
OMEGIMG.nbh - FAIL
RADIO - Fail
BOOTLOADER -
RCUST -
OS -
>*>*>*>*>*
Update Terminate
UPDATE FAIL
Error code: 33
I tried it a dozen of times and only once it showed me "Update Complete - Update Success". The next time I rebooted the device it showed an "SPL 2.5 MFG" but only once. After another reboot it was back to 1.8 again
But I think the Radio version was upgraded by this "success", since it was 16.23.02.09_2_ 16.24.00.23U when I bought this smartphone.
However, I am lost at this point. In the DFT-manual linked above the basic stuff to know doesn't contain "RUU". I downloaded the ROMUpdateUtility from the manual but when I try, there's always this Error 294- invalid vender ID.
I tried several times to upgrade spl_2.6.160015.3_WWE.exe, but it'S stuck at 0% and then I get the connection Error 262.
Also I might add, that the Radar isn't anymore in the Control Panel but only the HTC USB Sync-Driver (?)
I am afraid to update via Zune, because I read, if the SPL is too high, I couldn't downgrade again to HSPL. However, I never installed Zune. Is this still available? What should I do?
Edit: it worked
after GOldcard, the device restartet b itself and I missed that to enter SPL mode (instead it rebooted to USB HOst Mode by itself and startet the goldcard-method from beginning). By entering SPL mode I stopped the loop of goldcarding and after my SPL was 2.5 after first goldcarding, I was able to HSPL'ing the device
SGE2010 said:
Hi xda-community,
I am new to the Smartphone- and the Windows Phone world. My main cause is to get rid of the swisscom branding of my HTC Radar. But I also would really like to test some custom ROMs - especially the Dynamics HD2O looks promising in my mind. That's why I bought all the equipment necessary for Goldcard method for 2nd Gen WP7 phones as in this manual.
My Info:
HTC Radar C110e
Model ID: PI06100
SPL – 1.8. 160015.3 (131745)
Radio-16.23.06.10
Radio Software version: 16.23.06.10_ 16.32.00.23U
FW-Rev: 1600.2200.10801.166
Edit: it worked
after GOldcard, the device restartet b itself and I missed that to enter SPL mode (instead it rebooted to USB HOst Mode by itself and startet the goldcard-method from beginning). By entering SPL mode I stopped the loop of goldcarding and after my SPL was 2.5 after first goldcarding, I was able to HSPL'ing the device
Click to expand...
Click to collapse
Hi,
I use this ROM and it is very good one. But if you put HSPL already now you should put new radio RUU_Radar_Radio_17.5006.08.27 otherwise it will not work. Read the instructions in the tread. http://forum.xda-developers.com/showthread.php?t=1685271 in the tread there is link for downloading this radio. For me it was easy to HSPL the phone because I am not receive Country error and I don't need to use gold card just RUU.