I've been trying different ROMS and I used SlimROM for awhile until I realized GPS didn't work and my cell connection sucked comapred to TW-based ROMS. Then I tried Hyperdrive which worked at first but every time I would reboot after the first power on after the install, it would stay stuck on the Samsung screen. I reinstalled it time after time (like 6 times) and it would never REboot after the first boot. Every other ROM I've tried installing (Illusion, Synergy, CleanROM) just gets stuck right after the install and they never boot.
I've also noticed that when I try to do a factory wipe after installing anything but SlimROM, I get "error mounting /data" and "error mounting /sdcard/.android_secure".
I've tested installing all of these with the newest verison of TWRP and CWM v6.0.3.2
any ideas?
Factory reset Last option
snowman4839 said:
I've been trying different ROMS and I used SlimROM for awhile until I realized GPS didn't work and my cell connection sucked comapred to TW-based ROMS. Then I tried Hyperdrive which worked at first but every time I would reboot after the first power on after the install, it would stay stuck on the Samsung screen. I reinstalled it time after time (like 6 times) and it would never REboot after the first boot. Every other ROM I've tried installing (Illusion, Synergy, CleanROM) just gets stuck right after the install and they never boot.
I've also noticed that when I try to do a factory wipe after installing anything but SlimROM, I get "error mounting /data" and "error mounting /sdcard/.android_secure".
I've tested installing all of these with the newest verison of TWRP and CWM v6.0.3.2
any ideas?
Click to expand...
Click to collapse
if nothing works, factory-reset but last option.
yeah I just started downloading the stock rom to flash with ODIN in the morning. I just wanted some reason why this would happen so I won't always have have this problem and to know why it only works with some roms over others.
Please read forum rules before posting
Questions and help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Im having the same problem. I've done a complete ODIN restore to stock like 10 times, while trying Hyperdrive downloaded from 2 sources all with a matching MD5.
I'm on rooted stock right now until someone can figure this out.
I followed the rooting procedure... tried TWRP and Clockwork recoveries... Followed all instructions to the T...
Not sure what else to try... Or what I could be doing wrong... All I can think of now is restoring someones nandroid backup...
Being stuck at the Samsung Galaxy S4 screen sucks...
Zothar said:
Im having the same problem. I've done a complete ODIN restore to stock like 10 times, while trying Hyperdrive downloaded from 2 sources all with a matching MD5.
I'm on rooted stock right now until someone can figure this out.
I followed the rooting procedure... tried TWRP and Clockwork recoveries... Followed all instructions to the T...
Not sure what else to try... Or what I could be doing wrong... All I can think of now is restoring someones nandroid backup...
Being stuck at the Samsung Galaxy S4 screen sucks...
Click to expand...
Click to collapse
I restored to stock using these files http://www.sxtpdevelopers.com/showthread.php?t=237 to flash through ODIN. Rerooted by flashing the older kernel, rooting, installing superSU, then reflashing the newer kernel (normal root procedure). Then I insatlled ROM Manager and gave it root to install CWM recovery. Then I flashed to my same Hyperdrive ROM I was using before and now everything works beautifully. Nothing gets stuck anywhere an no more "cannot mount /data"
Just use that site and restore to stock and everything should work fine.
I'd like to add some confirmation to this. I had similar problems after flashing my first ROM- phone wouldn't reboot a second time, and when I attempted to make nandroids the files would be ridiculously large (~1 TB). I restored to the stock Touchwiz, rerooted normally, and reflashed normally. The strange thing is that I did the rooting and the flashing with the same files I had used the first time, implying something went wrong during the first rooting/flashing process.
Related
Hi, all. Relative noob here. Fascinate, Stock ED04 OTA, Rooted, modified stock kernel to "stick" CWM, Bloat frozen using TB.
I want to take the next step of flashing a ROM, and am doing (I feel) due dilligence by reading everything possible in this forum. However, I think I'm starting to suffer from information overload, and confusion has set in.
I used Odin to flash CWM 3.0.2.8x.ti. Immediately after selecting backup and restore/backup, I get "Error while backing up boot image". I see a few posts with the same statement, but no resolution. Flashed back to CWM 2.5; and backup appears to complete successfully. However, the date of the backup is 2000-01-01; and this is consistent on repeated attempts. The time and date on my phone (when booted) is correct.
Am I missing something? Any help would be greatly appreciated.
dhartman977 said:
Hi, all. Relative noob here. Fascinate, Stock ED04 OTA, Rooted, modified stock kernel to "stick" CWM, Bloat frozen using TB.
I want to take the next step of flashing a ROM, and am doing (I feel) due dilligence by reading everything possible in this forum. However, I think I'm starting to suffer from information overload, and confusion has set in.
I used Odin to flash CWM 3.0.2.8x.ti. Immediately after selecting backup and restore/backup, I get "Error while backing up boot image". I see a few posts with the same statement, but no resolution. Flashed back to CWM 2.5; and backup appears to complete successfully. However, the date of the backup is 2000-01-01; and this is consistent on repeated attempts. The time and date on my phone (when booted) is correct.
Am I missing something? Any help would be greatly appreciated.
Click to expand...
Click to collapse
i have had the same thing happen every time i try and backup. I'm wondering if it has anything to do with the newer recovery b.c when i had 2.5 i had no issues with it. Anybody have an answer for this?
I was in the same boat as you: rooted and bloat frozen via TB since the first week, and just added the modified kernel with CWM 3 earlier this past week. Haven't had any problems with it. I used Heimdall to flash CWM and the kernel. Now I'm running Evil Fascination with the LG Alternate Launcher. Tried ComRom but didn't care for it, though the default wallpaper was very pretty.
Back to the point, after I flashed the kernel and CWM I restarted the phone, let it boot, then rebooted into recovery to backup, instead of unplugging it and immediately booting Recovery.
Honestly, you've made it this far, you want to get a new ROM, I say download one and follow the directions (read them three times top-to-bottom) before flashing, and you should be good.
Yeah - I think Evil is where I want to end up until CM7 is fully functional (just spent all morning reading the CM7 waiting room thread).
Unfortunately, I'm apprehensive about flashing a new ROM until I can get a good backup image. I'm not sure why I'm getting the erroneous date on the backups. I could certainly be doing something wrong; just not sure what (if anything).
Maybe I need to use a different CWM? 2.5.1 and 3.0.2.8. don't seem to have worked for me. Also, If I understand what eulipion2 said, I have already fully booted, then powered down and rebooted into CWM to do a backup. 3.0.2.8 fails and 2.5.1 gives be incorrect dates.
Going to do a few hours of reading on CWM, I guess!
I'm using the first kernel listed in this thread from times_infinity. I initially flashed ComRom, didn't like it, kept this recovery, and flashed EF. Works great so far.
Give the Nandroid a go with this Recovery and see if it works for you.
hey i figured out how to get the back up to work. you have to enable voodoo and then it will work
Hey guys. Thanks for the suggestions. Tried the CWM 3 link from above, still no dice. I suspect I may need to have a voodoo kernel installed to actually enable the voodoo and try the backup again. Makes sense I guess.
Getting frustrated.
Success! Flashed a voodoo kernel, and was able to get (what appears to be) a successful nandroid backup with 3.0.2.8 (red). Never did get 2.5.1 (yellow) working. Strange, but irrelevant. CM7 build 7 is looking like it's ready for a test drive.
Hey all,
I'm very new to Cyanogen, so sorry if this is a very n00b question.
The ROM Manager doesn't appear to work. It keeps telling me I'm not running ClockWorkMod recovery, and cannot connect to the web to download. I purchased the premium version thinking it would solve this (as well as to support the dev), but no luck. Is it just an issue with the nightlies not capable of handling ROM manager yet, or is it a setting of some sort that I'm neglecting? It's not a huge deal, but it looks like such a nice, simple way to stay up-to-date with the nightly builds as opposed to updating through CWM, wiping, etc.
I saw a post mentioning to go into developer tools and enable root access. The closest I found was in settings and I allowed apps and ADB root access, but this didn't help.
Any suggestions would be greatly appreciated, thanks!
I'm a bit confused, Why do you require ROM manager? The CWM that is built in with the ICS Kang releases should be doing everything that is required, then again, your reply would matter.
I think I am having the same issue. When I try to Flash ClockworkMod Touch in Rom Manager it keeps telling me I need to first install ClockworkMod Recovery even though I have Recovery 5.5.0.4 currently installed. It did the same thing when I had Recovery 4.0.0.4 installed.
I even tried to "Flash ClockworkMod Recovery" (First option in ROM Manager) and it does nothing.
Any ideas?
BEcause the same menu is in the CWM recovery lol
I'm following one of the threads that updates the kang build every 3 days, and as opposed to having to boot through CWM, wipe, install, then re-install apps and replace widgets, I thought I could update through ROM Manager instead.
It sounds like Sn0warmy and I are having similar issues.
From what I've heard the ROM Manager doesn't really work for the tab yet. If you want to update without replacing all your apps you can just flash the zip file in CWM without doing a wipe. If it causes problems then you could do a wipe & reflash afterwards.
Dolfan058 said:
I'm following one of the threads that updates the kang build every 3 days, and as opposed to having to boot through CWM, wipe, install, then re-install apps and replace widgets, I thought I could update through ROM Manager instead.
It sounds like Sn0warmy and I are having similar issues.
Click to expand...
Click to collapse
ROM manager works but it's wonky on the ICS kangs. It doesn't do anything that you can't already do in recovery, so there's no real advantage anyways. Oh, and don't use ROM manager to install a new recovery, and CWR touch doesn't work for the GT10.
^You saved me the trouble of insisting Why thank you good sir.
Thanks for the replies. I'll keep updating through CWM.
Coffeebeans, obviously I'm following your thread (thanks for the good work!) and I tried flashing over once but I got a ton of process media FCs so I figured wiping was the best way to go and have done so ever since. Probably should invest in titanium backup at this point so I don't have to reinstall from market everytime I wipe.
Thanks again for the help y'all.
It worked once with 4/17 build of CM9. After that, it has never worked again. It boots into recovery and pretends its flashing, but stops half a second later and restarts.
Something odd happened today when I tried to update. It rebooted and phone locked up and screen went black. I took out the battery and put it back in then held up and power to go into CWM. All of a sudden Rom Manager took over and flashed the rom as well as the additional zips successfully and rebooted. Everything works.
CWM tries to flash from /emmc. Rom Manager tries to flash from /sdcard and fails. It may be due to the swapped mount points on CM9. in CWM they are still swapped, even if you check the use internal storage box and everything shows up properly in CM9.
Hi guys, so i decided to install the new CM10 so i already had root, i unlocked using the official tool, then installed CWM from Rom manager.
I then downloaded CM10 and GAAPS and kept them in a folder and also copied them to an sd card for safety.
I booted into CWM sucessfully, took a deep breath, then did a full wipe/factory restore, then wiped Cache, then wiped Dalvik Cache.
Then i proceeded to TRY to flash CM10.......... Firstly, CWM didn't list my external SD Card so i selected from the one i had saved on the internal storage.
It began to do the install then failed stating something about symlinks??? I retried the install and got the same thing.
I rebooted the Prime and now it's just stuck on the Eee Pad splash screen with "The Device Is Unlocked" written in the top left corner and it wont do anything else.............
I can reboot into CWM but how can i fix this and get CM10 installed??
PLEASE help!?!?!?!?!?
Thanks in advance.
Currently, no recovery can access external memory of any sort. Did you make a backup? Is it in the internal memory? Make sure you can flash back to your original settings BEFORE trying to flash something as experimental as CM10.
Please remember any Jelly Bean roms are highly experimental, and probably won't work correctly for everyone.
Read this thread for more help:
http://forum.xda-developers.com/showthread.php?t=1514088
I thought I replied to my own post shortly after the original post. I ended up rebooting into CWM and starting over again from the start and everything went smoothly. I endedup not liking the fact that flash and YouTube aren't supported yet so I flashed CM9 instead and I'm loving that.
Predtechhacker said:
I thought I replied to my own post shortly after the original post. I ended up rebooting into CWM and starting over again from the start and everything went smoothly. I endedup not liking the fact that flash and YouTube aren't supported yet so I flashed CM9 instead and I'm loving that.
Click to expand...
Click to collapse
Good to hear. One last advice is to use TWRP instead of CWM. CWM has issues with the prime while TWRP is more stable.
Predtechhacker said:
I thought I replied to my own post shortly after the original post. I ended up rebooting into CWM and starting over again from the start and everything went smoothly. I endedup not liking the fact that flash and YouTube aren't supported yet so I flashed CM9 instead and I'm loving that.
Click to expand...
Click to collapse
so how many time had u gone back then tried it.... i have the same problem i tried it like 10 times but it still stuck
what step did u do
I'm stuck in the same predicament! Did you just keep trying, and it finally worked????
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good:
So I originally had issues with my S4 when it updated to 5.0 I got a new one from the inusrance company and i wanted to root and rom it right away. Well it took me a wile to root it, I had to find the right (or what I thought was the right) Kernel's to use. I rooted it finally with Towelroot, I then tried to install TWRP and reboot to recovery and load a Rom, however my phone will never reboot to recovery now. It will only reboot to download. TWRP does not seem to work and if I mess it with it it will reboot to download and it won't do anything ells until I use Odin to reinstall the Kernel. If I try the button combo to reboot to recovery it still reboots to download. So I think that keeps me from using SafeStrap as well.
I am at a loss, I just want to get the Hyperdrive+RLS21+KK+S4 Rom on my phone so I don't get the stupid 5.0 that ruins my phone. Is there anyone who can help me out with this? Also I did try to do a factory data reset and that did not work either as it just rebooted to download and I had to use Odin to load the Kernel again and it just rebooted to the same un-reset OS I was in.
Brad
Bshade said:
So I originally had issues with my S4 when it updated to 5.0 I got a new one from the inusrance company and i wanted to root and rom it right away. Well it took me a wile to root it, I had to find the right (or what I thought was the right) Kernel's to use. I rooted it finally with Towelroot, I then tried to install TWRP and reboot to recovery and load a Rom, however my phone will never reboot to recovery now. It will only reboot to download. TWRP does not seem to work and if I mess it with it it will reboot to download and it won't do anything ells until I use Odin to reinstall the Kernel. If I try the button combo to reboot to recovery it still reboots to download. So I think that keeps me from using SafeStrap as well.
I am at a loss, I just want to get the Hyperdrive+RLS21+KK+S4 Rom on my phone so I don't get the stupid 5.0 that ruins my phone. Is there anyone who can help me out with this? Also I did try to do a factory data reset and that did not work either as it just rebooted to download and I had to use Odin to load the Kernel again and it just rebooted to the same un-reset OS I was in.
Brad
Click to expand...
Click to collapse
You do know that OC1 is still locked down(5.0.1)?
No root, no downgrade, no ROMs, no safestrap. No TWRP unless you happen to have MDK(4.2 Jellybean)
You will have to flash a stock 5.0.1 ROM and life with it.
I had an S4 that did upgrade to OC1 I got a new S4 with my insurance that was not upgraded to OC1 it was still 4.4.2 NK1. I loaded the Kernel NC5 and used Towelroot then back to NK1 but I cant get TWRP to work and boot to recovery to flash the ROM it only boots to Download. I really want to ROM it so that it does not go back to OC1 as when it was OC1 on my old phone that I don't have it was useless, I could not make phone calls or install anything on the phone or it would just lock up and restart constantly.
I can not figure out why it won't boot to recovery, and why if I try to do a factory reset i have to reload the Kernel to make the phone work again.
Thanks,
Brad
THIS IS A TEST PROCESS!!
I just posted a set of service files to try and downgrade...I pretty sure it might work! [emoji14]
http://forum.xda-developers.com/galaxy-s4-verizon/help/testing-revert-to-nk1-t3124096
It Worked! now I just have to figure out how to re root I tried once with Towelroot and it did no work then tried to load the Kernel that Towelroot worked with and it got all bugy so i reloaded your Kernel and it was still bugy so I did the whole process over again and it worked a second time. LOL
Thanks so much,
Brad
Bshade said:
It Worked! now I just have to figure out how to re root I tried once with Towelroot and it did no work then tried to load the Kernel that Towelroot worked with and it got all bugy so i reloaded your Kernel and it was still bugy so I did the whole process over again and it worked a second time. LOL
Thanks so much,
Brad
Click to expand...
Click to collapse
TWRP will not work on anything above 4.2.2(MDK). You have to use Safestrap.
Do a FULL wipe to nc5, not the workaround. THEN towelroot, install Busybox(IMPORTANT) and Safestrap(modded version of TWRP SPECIFICALLY for devices with locked Bootloader), install Hyperdrive or ROM of choice.
Well I got all the way through, I got the Safestrap to work and boot to recovery. I did a wipe factory reset and wipe cache and Dalvik. I then try to install rom, now it says to install in a working and setup rom slot? I think that is where I have and issue. If I just try the instal it does not work as I get the error "no MD5 file found" and then "error flashing zip" Do you think this is due to the wrong Rom Slot or am I missing something that I am not doing?
Thanks so much for your help so far, I am so close and at the very last step in this whole ordeal, or at least I hope.
Brad
Bshade said:
Well I got all the way through, I got the Safestrap to work and boot to recovery. I did a wipe factory reset and wipe cache and Dalvik. I then try to install rom, now it says to install in a working and setup rom slot? I think that is where I have and issue. If I just try the instal it does not work as I get the error "no MD5 file found" and then "error flashing zip" Do you think this is due to the wrong Rom Slot or am I missing something that I am not doing?
Thanks so much for your help so far, I am so close and at the very last step in this whole ordeal, or at least I hope.
Brad
Click to expand...
Click to collapse
hmmmmmmm
Did you put the ROM on the SD card. Make sure to use the STOCK ROM SLOT!!!
Yeah, both of those things. On the SD card as a zip file and the stock ROM slot. I did try last night to flash another ROM quick to see if it would work and I got the same error so I don't think its my ROM but something I am doing wrong on the phone.
Thanks for your all your help so far,
Brad
Finally got it, took some time and lots of rework. I soft bricked it so many times I cant count them. I got this down though now, I am just playing with the rom to see what setup I like now.
Thanks so much again for your help.
Brad
Bshade said:
Finally got it, took some time and lots of rework. I soft bricked it so many times I cant count them. I got this down though now, I am just playing with the rom to see what setup I like now.
Thanks so much again for your help.
Brad
Click to expand...
Click to collapse
I think we have all been there at some point. Good job getting it all going. Takes some patience and effort. Don't forget to have some fun!
Sent from my SCH-I545 using XDA Free mobile app