hello
i need help
i upgrde my phone to Cm10.1 last nightly
i work with hem like a 20min and after that he turn off hen he stop be4 i see the animations of Cm10.
he loop over and over again on the words " Samsung galaxy s2 "
i try to flash stok but it fail
try to get to recorvey i get there but i dont have any information to work with
i try to flash a karnel with odin but it fail
i dont know what to do ??
What model do you have. You was in boot loop.. whats cwm got in it. ?
cm 10.1 CWM 6.0.2.3
cm 10.1 CWM 6.0.2.3 or something like this.
Try go in to recovery and
Wipe/factory
format cache
Format data
Format preload
In advanced wipe dalv cache
Don't format any sd for now
Flash cm10.1 or whatever
Flash gapps "new Up to date one"
Wipe cache
Advanced wipe dalv cache
And reboot
:thumbup:
Related
help! I flashed cwm recovery then flash update (cm nightly 69) without wipe all, now stoped at yellow trangle all the time, what should i do ? please help! thank
Put out your battery then wipe again factory/data reset, wipe dalvic cache, wipe cache partition then install again the cm7
Sent from my GT-I9100 CyanogenMod 7 nightly build
Please make sure you are not flashing GT-I9100G model. Bcos it is not compatible
thanks so much i will try
Hi everyone,
I've installed ICS domination theme on my SGS2 with litening rom 6.1 installed on it.
After the installation, i've got a boot loop with a strange pop up which is
" Select an action
----------------------------------------------
Select an application for the USB device."
So I've wiped user data from the CWM recovery and I tried to install back my insecure rom (litening rom) with odin and also the original one.
The phone reboot well but i still get the pop up and i can't do anything ...
Is there a way to format and start from scratch or a another solution to remove this pop up ?
PS: i don't mind losing all my data.
PS2: sorry for the picture's bad quality (i took from my webcam ...)
ippo.san said:
Hi everyone,
I've installed ICS domination theme on my SGS2 with litening rom 6.1 installed on it.
After the installation, i've got a boot loop with a strange pop up which is
" Select an action
----------------------------------------------
Select an application for the USB device."
So I've wiped user data from the CWM recovery and I tried to install back my insecure rom (litening rom) with odin and also the original one.
The phone reboot well but i still get the pop up and i can't do anything ...
Is there a way to format and start from scratch or a another solution to remove this pop up ?
PS: i don't mind losing all my data.
PS2: sorry for the picture's bad quality (i took from my webcam ...)
Click to expand...
Click to collapse
U said u wiped the user data from CWM but don't wanna lose data??!
Go to CWM>
Mount and storage>format system
And also format cache
Then reflash rom
CHEERS ;-)
Sent from my Galaxy S2 - I9100 with SlimRom!
Hannibal226 said:
U said u wiped the user data from CWM but don't wanna lose data??!
Go to CWM>
Mount and storage>format system
And also format cache
Then reflash rom
CHEERS ;-)
Sent from my Galaxy S2 - I9100 with SlimRom!
Click to expand...
Click to collapse
Thanks for the quick reply !
I said i don't mind (or care) about losing data.
I don't have the mount storage and any format system (otherwise i would have already tried it ) on CWM ... I only get :
-reboot system
-apply update from sdcard
-wipe data/factory reset
-wipe cache partition
My android system recovery is 3e version
ippo.san said:
Thanks for the quick reply !
I said i don't mind (or care) about losing data.
I don't have the mount storage and any format system (otherwise i would have already tried it ) on CWM ... I only get :
-reboot system
-apply update from sdcard
-wipe data/factory reset
-wipe cache partition
My android system recovery is 3e version
Click to expand...
Click to collapse
YOU have no CWM recovery .
Did you follow the do not posts etc boot loop instructions post 1 Q&A
Flash a root and CWM kernel .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Thanks for the link.
I have succeeded into formating my system then reflash the original rom but now it is stuck at the first black screen with the "samsung galaxy s2" written on it.
So i format system again, format data, cache and reflash the rom ... same thing happened
ippo.san said:
Thanks for the link.
I have succeeded into formating my system then reflash the original rom but now it is stuck at the first black screen with the "samsung galaxy s2" written on it.
So i format system again, format data, cache and reflash the rom ... same thing happened
Click to expand...
Click to collapse
If you're experiencing a bootloop
http://forum.xda-developers.com/showthread.php?t=1108499
Other wise check that you've flashed everything properly
it's not a boot loop as my phone doesn't even boot ...
ippo.san said:
it's not a boot loop as my phone doesn't even boot ...
Click to expand...
Click to collapse
yeah sorry about that realised later.
Try wiping from CWM or flashing official stock firmware all over again
I have fixed my problem.
It was soft bricked so I have follow one thread: http://forum.xda-developers.com/showthread.php?t=1457458
Anyway, thanks everyone for answering me !
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium
hi i have galaxy sii gt i9100 everytime i flash a new rom or or update a rom using cwm and restart it my phone hangs at startup everytime and starts only when i wipe my data...any idea whats happening? plz help
Hey
wich rom did u flash?
Have you already tried to whipe the cache partition in cwm?
jiffer1991 said:
Hey
wich rom did u flash?
Have you already tried to whipe the cache partition in cwm?
Click to expand...
Click to collapse
happens with almost every rom...i've tried everything wipe data/factory reset, wipe cache, wipe dalvik nothing works!!
Do you wipe data,cache and dalvik before flashing?
Try to wipe data,cache and dalvik after you installed a Rom
olawp said:
Do you wipe data,cache and dalvik before flashing?
Try to wipe data,cache and dalvik after you installed a Rom
Click to expand...
Click to collapse
done that doesn't work!
Does it start normally after you wipe after you flashed?
I would try to flash stock 2.3.5 GB or 4.0.3 ICS with stock recovery and the flash cf root with odin.
Try this and then try flashing some roms
i'm having this prob on flashing wanamlite and neatrom latest rom. flashing is completed using cwm but when i'm goin to reboot it, it just stucked on bootanimation. i waited 20mins but still nothing happened. what could be the problem? i flashed the latest rootbox and i am able to boot no problem encountered.
Okay first of all - next time, loose the big font. I'm sure everyone who visits this forum can read totally fine.
Next, did you make a full wipe before flashing wanamlite or neatrom? (Wipe data/cache/dalvik cache)
Also after you've flashed any of the ROMs. If it gives you an option to reboot and no other option - do it. If there is an other alternative to go back to CWM - do that. Cause either way you should try to go back to CWM Recovery and from there, wipe cache and dalvik cache (again) and also set permissions. After you've done those things, reboot and it should work.
(i had same proble flashing Omega v23)
i did a clean install by philz and also the wipe data cache and dalvik but i don't go back to cwm to do that again and to fix permission, i just restarted it after installing the rom. thanks, i'll try to do what you said.