So i am running the viper rom and it runs awesome. But i really want to install different ROMs when when i use the recovery and back up everything and then reset everything and install the ROMs zip file, it says installed complete and then i reboot from the recovery. When it is booting, it goes to the white screen when HTC in green and then reboots? So it is in boot loop. Anyone have any thoughts on how to fix this? if so that would be great thanks
If you are in a boot loop try checking the integrity of the ROM by running md5 checksum. Re download the rom then clear davlik cache and do a factory reset in Clockwork mod an then re install zip. Remember to get back into clock work mod you hold volume down as you boot the phone.
Sent from my Inspire 4G using XDA
Sounds like a bad flash. If you are s-on, I recommend you use 4ext as your recovery since this takes care of improper kernel flashes which can cause boot loops. Actually, use it if you are s-off too .
Did you do a super wipe before flashing the new Rom? If not, flash a copy of Chad's super wipe before flashing the Rom.
Sent from my PG86100
I am using TWRP recovery right now. I had clockworkmod but it seemed to not work as well. Is there a link to 4ext recovery where i can download and flash it please? Hopefully that will work
Thanks to coal686 for the recovery link in his signature.
I am still stuck with putting a new Rom on my 3d, could anyone help? It still goes in bootloop and I have tried twrp, clockwork, and now 4ext. I factory reset and do what all the threads say but it won't get past the white screen with HTC on it. Then it reboots and does it over and over. Anyone help
Hello i was trying to download the latest CM10 ROM onto my ATT Htc one X 2.20. i got the phone's bootloader unlocked and i got it rooted. I got followed the instructions but can't find a way to get it to work its just stays on the bootscreen spinning for hours. I did this:
1.)downloaded the rom.
2.)Downloaded gapps.
3.)moved rom and gapps to sd.
4.)flashed the boot.img via command prompt doing this : fastboot flash boot boot.img
5.)wiped cache/dalvik cache.
6.)Flashed rom
7.)flashed gapps
8.)wiped cache/dalvik cache again.(after flashed 6&7)
9.) rebooted phone
After this i tried to do it all over again and the same thing just stuck on bootloop. (bootscreen)
I don't own the phone but I will try and help
1. If you was on Sense prior to flashing this then full wipe before installing the Rom & Gapps (wipe data as well as both cache's)
2. Make sure you DL AT&T One X CM10 rather than the Tegra 3 model
Hope this helps dude!
Sent from my LT30p using xda premium
So... I got my HTC One today and it's been a very difficult experiance. I am quite a newbie when it comes to rooting and such but I managed to unlock my bootloader (with the exception that it shows TAMPERED at the top) then proceded to flash TWRP through fastboot. TWRP wouldn't mount /data, /sdcard, etc... it wouldn't work. A little bit of searching led me to flash CWM instead and that seemed to work.
In CWM I wiped data/factory reset, then flashed SuperSU, then flashed CleanROM, then flashed BulletKernel, and finally reboot. Now I'm stuck in a bootloop and when I go to my bootloader and try to enter recovery it reboots, shows the CWM logo then reboots my phone. I tried re-flashing CWM via fastboot to no avail.
TL;DR: Phone is in bootloop and won't even boot into recovery
Any help would be much appreciated,
Thank you!
EDIT: Had a feeling it was due to the fact I didn't clear cache/dalvik cache before rebooting. I erased my cache via fastboot and voila it booted into recovery!
OrangeFever said:
So... I got my HTC One today and it's been a very difficult experiance. I am quite a newbie when it comes to rooting and such but I managed to unlock my bootloader (with the exception that it shows TAMPERED at the top) then proceded to flash TWRP through fastboot. TWRP wouldn't mount /data, /sdcard, etc... it wouldn't work. A little bit of searching led me to flash CWM instead and that seemed to work.
In CWM I wiped data/factory reset, then flashed SuperSU, then flashed CleanROM, then flashed BulletKernel, and finally reboot. Now I'm stuck in a bootloop and when I go to my bootloader and try to enter recovery it reboots, shows the CWM logo then reboots my phone. I tried re-flashing CWM via fastboot to no avail.
TL;DR: Phone is in bootloop and won't even boot into recovery
Any help would be much appreciated,
Thank you!
Click to expand...
Click to collapse
Boot into bootloader. Then do fastboot erase cache. Then try rebooting. If you can get into recovery but not ROM, reflash the ROM. If you can't even get into recovery still, try reflashing recovery. Fastboot flash recovery recovery.img. Then try getting into recovery and reflashing.
Sent from my HTC One
phositadc said:
Boot into bootloader. Then do fastboot erase cache. Then try rebooting. If you can get into recovery but not ROM, reflash the ROM. If you can't even get into recovery still, try reflashing recovery. Fastboot flash recovery recovery.img. Then try getting into recovery and reflashing.
Sent from my HTC One
Click to expand...
Click to collapse
Thank you!
SOLVED
hi, sorry bad english
i got a htc desire x and begann to read this tut about unlockinging, rooting, installing custom roms
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
i unlocked and rooted the dx, then i installed this rom: STOCK Jelly Bean with Sense 4+ build 2.20.401.6 for Desire X
http://forum.xda-developers.com/showthread.php?t=2239511
were not so happy, would try this one: ViMiRo ROM v1.0-1
http://forum.xda-developers.com/showthread.php?t=2797110
did a full wipe, installed the vimiro rom, Flashed boot.img from zip via fastboot and rebooted
but then the dx stuck on the cyanogenmod logo and nothing more happen
has anyone please a solution for this, or some tipps
SOLVED
4js said:
hi, sorry bad english
i got a htc desire x and begann to read this tut about unlockinging, rooting, installing custom roms
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
i unlocked and rooted the dx, then i installed this rom: STOCK Jelly Bean with Sense 4+ build 2.20.401.6 for Desire X
http://forum.xda-developers.com/showthread.php?t=2239511
were not so happy, would try this one: ViMiRo ROM v1.0-1
http://forum.xda-developers.com/showthread.php?t=2797110
did a full wipe, installed the vimiro rom, Flashed boot.img from zip via fastboot and rebooted
but then the dx stuck on the cyanogenmod logo and nothing more happen
has anyone please a solution for this, or some tipps
Click to expand...
Click to collapse
what recovery version do you have \ installer ? and post your bootloader details
the rom vimiro has not cyanogenmod logo
[
nek46 said:
what recovery version do you have \ installer ? and post your bootloader details
the rom vimiro has not cyanogenmod logo
Click to expand...
Click to collapse
recovery = twrp 2.6.30
bootloader details - not sure what you mean?
maybe this: hboot 1.25.002
i thought that the vimiro has no cm logo, but when i flashed the rom and fastboot the boot.img i got no errors, it says sucessfully and ok
4js said:
[
recovery = twrp 2.6.30
bootloader details - not sure what you mean?
maybe this: hboot 1.25.002
i thought that the vimiro has no cm logo, but when i flashed the rom and fastboot the boot.img i got no errors, it says sucessfully and ok
Click to expand...
Click to collapse
everything is correct, try another rom, I do not understand why not start the rom
4js said:
hi, sorry bad english
i got a htc desire x and begann to read this tut about unlockinging, rooting, installing custom roms
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
i unlocked and rooted the dx, then i installed this rom: STOCK Jelly Bean with Sense 4+ build 2.20.401.6 for Desire X
http://forum.xda-developers.com/showthread.php?t=2239511
were not so happy, would try this one: ViMiRo ROM v1.0-1
http://forum.xda-developers.com/showthread.php?t=2797110
did a full wipe, installed the vimiro rom, Flashed boot.img from zip via fastboot and rebooted
but then the dx stuck on the cyanogenmod logo and nothing more happen
has anyone please a solution for this, or some tipps
Click to expand...
Click to collapse
Try flashing another kernel. You somehow flashed the CM boot.img.
nightwalkerkg said:
Try flashing another kernel. You somehow flashed the CM boot.img.
Click to expand...
Click to collapse
Not quite... If he flashed CM boot.img for Sense ROM, he shouldn't see boot animation at all. What he obviously did is flashing a CM ROM and CM boot.img, but one that won't boot the CM ROM. Bootanimation is part of the ROM, not of kernel... So what I would suggest for @4js: Redownload ViMiRo Rom, also redownload any Sense JB kernel from Original Development you like, wipe your phone and reflash everything. That should solve your issues.
nek46 said:
everything is correct, try another rom, I do not understand why not start the rom
Click to expand...
Click to collapse
i tried [ROM][PA 2.99][4.1.2] Paranoid Android UNOFFICIAL [protou] with the double wipe and the gapps and finally
i now stuck at the new paranoid android logo,
nightwalkerkg said:
Try flashing another kernel. You somehow flashed the CM boot.img.
Click to expand...
Click to collapse
i did not, i really double checked it
dansou901 said:
Not quite... If he flashed CM boot.img for Sense ROM, he shouldn't see boot animation at all. What he obviously did is flashing a CM ROM and CM boot.img, but one that won't boot the CM ROM. Bootanimation is part of the ROM, not of kernel... So what I would suggest for @4js: Redownload ViMiRo Rom, also redownload any Sense JB kernel from Original Development you like, wipe your phone and reflash everything. That should solve your issues.
Click to expand...
Click to collapse
i will try and give feedback
not succeded
got it cheap from 2nd hand, could a hardware defect cause the problems?
4js said:
not succeded
got it cheap from 2nd hand, could a hardware defect cause the problems?
Click to expand...
Click to collapse
ok, what exactly did you try?
cause im a beginner in flashing smartphones, there are some things i don't understand
1) when i do a factory reset with twrp 2.6.3.0, there should be wiped data, cache and dalvik, .android_secure
but when i afterwards do a advanced wipe everything succeded, exept dalvik cache, there it fail
2) after a succeded factory reset without os installed, i reboot, and then also i stuck at a boot logo
shouldn't that not be wiped too?
could an other recover.img from http://forum.xda-developers.com/showthread.php?t=2502327 help?
the last succesful rom installed was cm-10.1-20140624-UNOFFICIAL-protou_v2.zip, not the one i wrote in first post
@dansou901
i tried different roms, exactly how it was explained, but never succedded, after rebooting i always stuck at the boot logo
4js said:
cause im a beginner in flashing smartphones, there are some things i don't understand
1) when i do a factory reset with twrp 2.6.3.0, there should be wiped data, cache and dalvik, .android_secure
but when i afterwards do a advanced wipe everything succeded, exept dalvik cache, there it fail
2) after a succeded factory reset without os installed, i reboot, and then also i stuck at a boot logo
shouldn't that not be wiped too?
could an other recover.img from http://forum.xda-developers.com/showthread.php?t=2502327 help?
the last succesful rom installed was cm-10.1-20140624-UNOFFICIAL-protou_v2.zip, not the one i wrote in first post
@dansou901
i tried different roms, exactly how it was explained, but never succedded, after rebooting i always stuck at the boot logo
Click to expand...
Click to collapse
Try the TWRP 2.5.0.0 for JB, it is reported to be most stable. Hopefully this resolves the issues for you.
dansou901 said:
Try the TWRP 2.5.0.0 for JB, it is reported to be most stable. Hopefully this resolves the issues for you.
Click to expand...
Click to collapse
thanks for quick reply, i will try and give then feedback
twrp 2.5.0.0 did it
it was a really full wipe, and now i'm at vimiro 1.01
thanks to everybody for the help, special thanks to dansou901 for helping and his excellent tutorial
hi there!
i`m using a i9300 running on s5 sensation v6 rom on boeffla kernel v6. using touch cwm v6.0.4.6
i was attempting to do a full wipe (format data etc.) and reflashing the sensation rom due to some issues.
while fomatting, the process suddenly stop and my phone rebooted to recovery.
i thought i was done formatting. when i flashed the zip file, it suddenly switched off and rebooted to recovery mode.
i tried flashing the file or wiping/factory reset again and again and it continued rebooting into recovery mode.
any ideas on why this is happening??
rudyashraf said:
hi there!
i`m using a i9300 running on s5 sensation v6 rom on boeffla kernel v6. using touch cwm v6.0.4.6
i was attempting to do a full wipe (format data etc.) and reflashing the sensation rom due to some issues.
while fomatting, the process suddenly stop and my phone rebooted to recovery.
i thought i was done formatting. when i flashed the zip file, it suddenly switched off and rebooted to recovery mode.
i tried flashing the file or wiping/factory reset again and again and it continued rebooting into recovery mode.
any ideas on why this is happening??
Click to expand...
Click to collapse
Something went wrong,it happens. Odin and stock rom are your friends,nothing else will help
Sent from my GT-I9300 using XDA Free mobile app
Hey!
Why dont you try to reflash the CWM recovery using Odin?
no meed to again flash the Root files! Just flash the CWM recovery!
hope it will work again!
If it doesn't work then try to flash the stock Rom using Odin!
Hope it will help u!