I originally had a cheap matte screen protector from eBay... after a few months it was pretty beat up and in need of replacing.
After searching all the different options.. I figured I would give the XtremeGuard Screen Protector a go.
I ordered off eBay XtremeGuard, $2 w/ free shipping. It arrived two days later. It comes with the screen protector, cleaning cloth and squeegee card.
Last night I began the install. It is a "wet" install process. Very similar to installing window tint on a car.
First, I cleaned the phone really well with soap and water and the micro fiber cleaning cloth. Then I prepared the soap and water solution. Only a small amount of soap is needed. I got my fingers wet to prevent fingerprints and peeled the backing off the screen protector. I got the screen protector pretty wet with the solution and placed it on the phone from edge to edge, careful not to get any big bubbles. With it still wet, it's very easy to line it up perfectly.
Once I had it in position, I carefully squeegeed out the solution starting in the center, working outwards. I found getting the squeegee wet with the solution helps it glide across the screen protector. There was a tiny spec near a corner, so I lifted the edge back up, got the spec out and proceeded with the squeegee. After that was done, I wiped away all the excess water solution and let the phone sit for a couple hours.
At first it felt very sticky, but this morning, it seems to be a lot better. The manufacturer says it takes 24 hours to fully dry. But who can wait that long haha. I am being very careful with it until it completely dries.
Overall, it seems very good. The fit is great! I really like the wet install process, as it allows you to position it perfectly and it's very easy to get out any bubbles.
I will report back with an update as I continued to use and abuse my phone. I work in a metal forging plant so my phones experience extreme conditions; 2000°F +, drops, welding and cutting sparks, etc.
I will also post some pictures when I have a chance to use my wife's phone to capture the pic.
I highly recommend the XtremeGuard Screen Protector so far.
Sent from my LG-E970 using xda premium
To tacky for me I'd rather buy cheap non wet ones and replace them add they scratch
sent from a guy living in a van down by the river
Update:
Two days have gone by and the screen protector feels smooth, not quite as smooth as the gorilla glass, but close.
Still loving the XtremeGuard
Sent from my LG-E970 using xda premium
hollywood528 said:
Update:
Two days have gone by and the screen protector feels smooth, not quite as smooth as the gorilla glass, but close.
Still loving the XtremeGuard
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
Good to know. I actually bought this while on sale a few months ago and its still sitting in my backpack. I'll use it after im done with the $2 ebay ones that just stick on :good:
Have you tried Ghost Armor?
Sent from my LG-E970 using Tapatalk 4 Beta
WarEagleUS said:
Have you tried Ghost Armor?
Sent from my LG-E970 using Tapatalk 4 Beta
Click to expand...
Click to collapse
No I haven't. You recommend it?
Sent from my LG-E970 using xda premium
Yes sir I highly do. I'd love to combine what you got with ghost armor for ultimate protection
Sent from my LG-E970 using Tapatalk 4 Beta
WarEagleUS said:
Yes sir I highly do. I'd love to combine what you got with ghost armor for ultimate protection
Sent from my LG-E970 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Sounds like a Trojan ad lol :laugh:
Related
Has anyone encountered any problems with screen protector for the gs3? The edge of the gorilla glass is not completely flat.
sewhuy said:
Has anyone encountered any problems with screen protector for the gs3? The edge of the gorilla glass is not completely flat.
Click to expand...
Click to collapse
I havnt had a chance to apply my SGP crystal clear one yet, but that has a slight curve, not the edges, but I think they should all be OK, they sorta clinge to the screen, so it should stay.
Sent from my SPH-D710 using xda premium
Because of the curved glass all dry application protectors will not fully cover the full phone. The wet ones will fix this. Just trying to find a wet one that looks as good as a dry protector is hard.
Chevyboxer said:
Because of the curved glass all dry application protectors will not fully cover the full phone. The wet ones will fix this. Just trying to find a wet one that looks as good as a dry protector is hard.
Click to expand...
Click to collapse
I'm using the Steinheil Flex HD which is a wet application. I prefer the dry ones but none is available. Not 24 hours yet so some spots tend to have rainbow coloring. I hope it clears up when its completely dry. Fit is perfect though.
gingson said:
I'm using the Steinheil Flex HD which is a wet application. I prefer the dry ones but none is available. Not 24 hours yet so some spots tend to have rainbow coloring. I hope it clears up when its completely dry. Fit is perfect though.
Click to expand...
Click to collapse
The Steinheil SGP Crystal is dry, and available, I have 2.
Sent from my SPH-D700 using xda premium
TeamERA said:
The Steinheil SGP Crystal is dry, and available, I have 2.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Is that cut smaller than the screen? Are the edges staying firmly?
Put on the full body protector kit from xtremeguard and had no problem due to it being a wet install. The cut is very good on it and there is not a lot of gap on the sides at all, no weird marbling or issues with it being too sticky, I'll update you after a couple of days of it setting in properly.
Installed a Steinheil Ultra Crystal on my wife's phone Friday night. The edges to do completely go down. Kinda irritating...
It doesn't look like Zagg is making an HD version either. A wet application seems to be the only way to get the screen protector to fit properly.
Zagg screen protector is great fit the screen perfect with wet application.
I HIGHLY recommend getting a Zagg HD. Literally looks like nothing is on my screen. The wet application forms and fits to the screen.
Sent from my SPH-L710 using xda premium
gingson said:
Is that cut smaller than the screen? Are the edges staying firmly?
Click to expand...
Click to collapse
Havnt been able to apply it yet, 32gb PB
Sent from my SPH-D700 using xda premium
I've got the xtremeguard waiting in the wings(pre-sale @ amazon a couple weeks ago). It's a wet application. I'll let you know how it goes/looks after I get the phone.
When I got my phone, I was going to get the $15 pack of Sprint screen protectors: the dry ones I've always used. Except... they were anti-glare and they don't have clear and I don't like the sparkles and reduced resolution of anti-glare or matte screen protectors. So the store talked me into the Zagg. I'm not a fan of the wet-apply screen protectors but thought I'd give it a shot for once. To each their own: some may love them, but I hate this Zagg screen protector and find it almost unusable! Orange peel out the wazoo (I can live with that since it doesn't reduce resolution) but the worst thing is that it's "sticky" like soft rubber. I can't even slide my finger (well) on this thing! Tried cleaning it and no amount of cleaning, washing hands, pressing lighter, etc. fixes it. Sliding my finger feels like I have dried sticky soda on my fingers.
So... being early in the game, has any one found a dry-apply clear screen protector they'd recommend, either from local stores (Best Buy, etc.) or online?
Edit: Maybe I should have posted this in accessories, but thought maybe someone had a solution to the sticky Zagg so I put it here.
Thanks,
Mike
Well i always used the cheapo SP, and i ordered four for $2 from Ebay the other day. Took like 2 days to get to my house. Only thing is, is that it dosen have the cut-out for the proximity sensor, but it functions just fine. Turns off when i make phone calls and everything. Some may not have luck with others that dont have the cutout, but this one works just fine. heres the link. If you want, i can send you one to try out. I have 3 left, and there no way ill use all these. WEnt on super easy and looks good. Lemme know. PM ME if u want. Be glad to mail ya one. Also, the one from Sprint SUCK. they dont even cover the whole phone. Just the screen itself. THey dont even go all the way doesn to the buttons. Unreal
http://www.ebay.com/itm/40030385907...X:IT&_trksid=p3984.m1497.l2649#ht_1705wt_1396
Go with steinheil. Pretty good price on Amazon and you get two screen protectors.
http://www.amazon.com/dp/B0088RNXLK/ref=cm_sw_r_an_am_ap_st_us?ie=UTF8
I have always used clarivue screen protectors. Top notch and super easy to put on with NO bubbles. Little expensive ($15) but it comes with 2. I put them on every device I have. I love them.
Sent from my EVO using xda premium
mikeyxda said:
When I got my phone, I was going to get the $15 pack of Sprint screen protectors: the dry ones I've always used. Except... they were anti-glare and they don't have clear and I don't like the sparkles and reduced resolution of anti-glare or matte screen protectors. So the store talked me into the Zagg. I'm not a fan of the wet-apply screen protectors but thought I'd give it a shot for once. To each their own: some may love them, but I hate this Zagg screen protector and find it almost unusable! Orange peel out the wazoo (I can live with that since it doesn't reduce resolution) but the worst thing is that it's "sticky" like soft rubber. I can't even slide my finger (well) on this thing! Tried cleaning it and no amount of cleaning, washing hands, pressing lighter, etc. fixes it. Sliding my finger feels like I have dried sticky soda on my fingers.
So... being early in the game, has any one found a dry-apply clear screen protector they'd recommend, either from local stores (Best Buy, etc.) or online?
Edit: Maybe I should have posted this in accessories, but thought maybe someone had a solution to the sticky Zagg so I put it here.
Thanks,
Mike
Click to expand...
Click to collapse
Seidio ultra clear. Very nice
Sent from my EVO using xda premium
I like realook checkout some installed pictures here that I posted.
Hard plastic no orange peel dry application.
$12 on Amazon for two.
http://forum.xda-developers.com/showthread.php?t=1709628
http://item.mobileweb.ebay.com/viewitem?itemId=380447335375&index=23&nav=SEARCH&nid=25583971485
I just got these . Man its the best protector IMO. It doesn't scratch and you can't even tell its on the phone . Fits the phone perfect . Not rubbery like the zag .
Sent from my EVO using xda premium
Zaggs loose their stickiness over time, but Steinhel seems to be the best.
Sent from my GT-I9300 ro.cdma.home.operator.alpha using Tapatalk 2
Another vote for steinheil. Can't even tell its on the phone.
Sent from my EVO using xda premium
Kcarpenter said:
Zaggs loose their stickiness over time, but Steinhel seems to be the best.
Sent from my GT-I9300 ro.cdma.home.operator.alpha using Tapatalk 2
Click to expand...
Click to collapse
I've personally always liked and used Zagg. And it will slick up over a few days. If not, take it back, they are great on warranty. That being said, I got the Zagg HD for my lte. Can't tell it's on there at all.
Sent from my EVO using xda premium
mtg981 said:
I've personally always liked and used Zagg. And it will slick up over a few days. If not, take it back, they are great on warranty. That being said, I got the Zagg HD for my lte. Can't tell it's on there at all.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
the problem I have with zagg is that ridiculous price of $25...no way in hell a piece of plastic should cost that much.
Sent from my EVO using XDA
I always buy the full body clear protectors from www.BodyGuardz.com, it always helps my phone resale value too. This time I went and bought the Black Carbon Fiber skin with the screen protector. Makes the Phone look and feel much better too. They also have Red and White.
http://www.bodyguardz.com/armor-carbon-fiber-htc-evo-4g-lte.html?dir=asc&order=sort_priority
Sent from my Evo LTE via Tapatalk
I purchased from a luckeyminky on eBay. It is the type with two step application. First step exposes the sticky side. Smooth out the bubbles. Then remove step two layer. I reccomend cutting the top right cornner . It will get caught and eventually pull the protector off. Also if you get a piece of lint use one piece of scotch tape to life the screen protector another to grab the piece of dust. Did that last night with awesome results.
parmend said:
http://item.mobileweb.ebay.com/viewitem?itemId=380447335375&index=23&nav=SEARCH&nid=25583971485
I just got these . Man its the best protector IMO. It doesn't scratch and you can't even tell its on the phone . Fits the phone perfect . Not rubbery like the zag .
Sent from my EVO using xda premium
Click to expand...
Click to collapse
how are these workingi for ya? i bought them and haven't put them on it. i have these and sgp ultra clears but thinking bout returning the sgp if the fosmon works as good
Hey guys,
Someone on irc mentioned this deal last night, thought I'd pass the info on. Here is the link:
http://www.xtremeguard.com/LG-Optim...rotectors-p/lg-optimus-g-screen-protector.htm
Also if you use coupon code "70off" the final price is $1.50 with free shipping in the USA.
I didn't see this deal posted anywhere, but if it is, my apologies. Enjoy guys!
sent from my LG e970
These use a wet application process. Just a heads up. It's not as clear as other screen protectors.
Sent from my LG-E970 using Tapatalk
Thanks for the heads up was planning on going naked since i got the best buy warranty but for $1.50 be a shame not to cover my baby
---------- Post added at 02:00 PM ---------- Previous post was at 01:59 PM ----------
gsrrr said:
These use a wet application process. Just a heads up. It's not as clear as other screen protectors.
Sent from my LG-E970 using Tapatalk
Click to expand...
Click to collapse
man it looked like a pretty clean install on that iphone... apple always trying to make things look better than they are lol
gsrrr said:
These use a wet application process. Just a heads up. It's not as clear as other screen protectors.
Sent from my LG-E970 using Tapatalk
Click to expand...
Click to collapse
I have one on my phone, have for weeks. It is completely transparent to me, I see no absolutely no clarity issues.
CattleRancher said:
I have one on my phone, have for weeks. It is completely transparent to me, I see no absolutely no clarity issues.
Click to expand...
Click to collapse
Hmm maybe they changed it for the G. I have their screen protector on my nexus 7 and my friend has it on his S3 and its feel, look, texture isn't the same as my realook one.
Sent from my LG-E970 using Tapatalk
Bought one.. I'll let you guys know how it compares with my current realook
Sent from my LG-E970 using Tapatalk 2
Did it take you guys a long time to receive your screen protectors? I ordered one on the 14th and I still haven't received it yet. Starting to get a little worried.
Sent from my LG-E970 using xda app-developers app
I got mine within like 2 weeks I think. I haven't actually applied it yet though, I'm still debating if I want to put it on. When you guys get it, let me know how it feels and reacts.
sent from my LG e970
Why do you need a screen protector for a phone that has Gorilla Glass on it?!? (in this case gorilla glass 2) I have never ever scratched a phone with gorilla glass, I dont use a case and I do put it in my pocket. (empty pocket of course) in my opinion if you put a case/screen protector you only take away from the great design of the phone.
Dude, some people lead busy and active lives that are hazardous to fragile things like glass. To condemn a huge portion of the population who like to keep their $600 toy from getting a knick in it or worse is pretty asinine.
Sent via LG E970 SlickROM v6
ferrojasaguilar said:
Why do you need a screen protector for a phone that has Gorilla Glass on it?!? (in this case gorilla glass 2) I have never ever scratched a phone with gorilla glass, I dont use a case and I do put it in my pocket. (empty pocket of course) in my opinion if you put a case/screen protector you only take away from the great design of the phone.
Click to expand...
Click to collapse
Gorilla glass 2 is trash. If your expecting the same from it that you did the original your in for some heartbreak.
Captivate 2 years not a single scratch still flawless. G2 og scratched twice in first 2 weeks. Luckily my screen protector hides the scratches so I'm not pulling my hair out from ocd.
Stay away from XtremeGuard
DonMarek said:
Hey guys,
Someone on irc mentioned this deal last night, thought I'd pass the info on. Here is the link:
http://www.xtremeguard.com/LG-Optim...rotectors-p/lg-optimus-g-screen-protector.htm
Also if you use coupon code "70off" the final price is $1.50 with free shipping in the USA.
I didn't see this deal posted anywhere, but if it is, my apologies. Enjoy guys!
sent from my LG e970
Click to expand...
Click to collapse
These protectors are terrible. I bought three, and I had to throw all of them away due to complications while installing. If you manage to get it applied, you will end up with air bubbles or soap stuck under the protector. I have applied dozens of dry screen protectors over the years, and this was my first (and last attempt) at a wet application screen protector. The coupon price was still in effect last week, so I bought three of these protectors. They arrived today. I read the included instructions and watched two videos about how to apply them. While trying to apply one, there was soap stuck under the middle of the protector, and it would not come out, no matter how much flattening I attempted with the included hard plastic tool. In fact, the screen was easily scratched by flattening it out. I had to throw away that first one.
I used less soap for the second one, but there were air bubbles and soap was stuck under the protector again. I then tried to reuse this protector without soap, but it was simply too sticky to arrange properly. When I had finally gotten it in the right position, the air bubbles would simply not come out.
The third time, I used a different kind of soap. Same problems. Soap and air bubbles stuck under the screen. The screen protector scratches and deforms when attempting to get out the bubbles.
Again, I've applied many dry screens, so I am familiar with the trickiness of bubbles. I have overcome them many times. With these wet screen protectors, you simply cannot remove the bubbles, and you will deform the protector while attempting to remove bubbles. If for some reason you enjoy throwing away money and time and wish to install this protector, first cover up the phone's ear speaker. A lot of water and soap seeped in while attempting to install these things.
Thanks, Just ordered one!
Anyone know of cheap back protectors?
Okay so I've narrowed my options down to the SGP glas.tr slim, the Glas.t nano, BodyGuardz and Tech Amor Ballistic tempered glass. Which one would you guys suggest?
Also what is a good way to apply them? With these type of screen protectors being a one shot type of thing, I'm nervous to put it on. On my iPhone 5, I tried the steamy bathroom method but I ended up getting steam under the glass screen protector when I installed it. Any great methods you guys used for a dust/bubble free application? Thanks
Sent from my SCH-I545 using Tapatalk 2
IDK about them but I use MIME Ghost glass on my S$ and its AMAZING. It has the hardness rating of (9H) compared to others I looked at (7-8H) and it is also only .32mm thick. Others i looked at were like .40mm thick. The reason i mention thickness is that with a case on the phone the surface still sits lower then the rubber edges of the case so you aren't putting the phone face down and have it sitting on the glass screen protector. MIME also has a lifetime warranty that if it breaks or whatever it's 50% off to replace it.
1 more thing, not all of them have a curved edge to the glass. Some have a straight edge and can chip or crack much easier so make sure then ones you are looking at have a curved edge finish.
As far as install... just make sure its clean of dust. You can pick them up and reapply the glass protectors pretty easily. Point of reference, i used the home button and the edge of the top of the screen protector and the ear speaker at the top to make sure it was straight and centered
Just my 2 cents on what i got and why i decided on that one.
I used glas.t cuz I always use a case. Love it. And its super thin. .023? I think. Applied it with the shower on in the bathroom. came out mint.
Sent from my SCH-I545 using Tapatalk 2
imablackhat said:
I used glas.t cuz I always use a case. Love it. And its super thin. .023? I think. Applied it with the shower on in the bathroom. came out mint.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
You didn't get any steam under the screen protector that made it all foggy? That's what happened to me before
Sent from my SCH-I545 using Tapatalk 2
got a glass.tr knockoff form ebay. Cheap ~$8 and fits with a neo hybrid case. Works perfectly, wouldn't pay a dollar more for a "name" brand one. They are the same exact thing, i applied it very carefully and managed to get no dust. just lay it flat and push the bubbles out from the middle.
oakley470 said:
got a glass.tr knockoff form ebay. Cheap ~$8 and fits with a neo hybrid case. Works perfectly, wouldn't pay a dollar more for a "name" brand one. They are the same exact thing, i applied it very carefully and managed to get no dust. just lay it flat and push the bubbles out from the middle.
Click to expand...
Click to collapse
I hear more and more about these knockoffs. Are they shipped from like china or from the US?
Sent from my SCH-I545 using Tapatalk 4
xXJay_RXx said:
You didn't get any steam under the screen protector that made it all foggy? That's what happened to me before
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Nopee. Shower not to hot. Just slightly. And left it on for two minutes and did it.
Sent from my SCH-I545 using Tapatalk 2
xXJay_RXx said:
I hear more and more about these knockoffs. Are they shipped from like china or from the US?
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
look on ebay, can get both. mine was from us. They aren't knockoffs, they all are the same, you think spigen is manufacturing screen protectors in the us? No company can actually do anything different then another with a half millimeter piece of glass.
oakley470 said:
look on ebay, can get both. mine was from us. They aren't knockoffs, they all are the same, you think spigen is manufacturing screen protectors in the us? No company can actually do anything different then another with a half millimeter piece of glass.
Click to expand...
Click to collapse
Just bought a $9 screen protector. Hope it works well
Sent from my SCH-I545 using Tapatalk 2
I've been a fan of Skinomi for years. They have a glass product now that has camphored edges and zero degradation in touch sensitivity. I got one for my G2 and put one on the G3 minutes after unpacking.
Order from them directly or Amazon.
Sent from my VS985 4G using XDA Premium 4 mobile app
jimbob_sf said:
I've been a fan of Skinomi for years. They have a glass product now that has camphored edges and zero degradation in touch sensitivity. I got one for my G2 and put one on the G3 minutes after unpacking.
Order from them directly or Amazon.
Sent from my VS985 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
how bout some pics and a link
I just purchased this myself. I will try to post some pics once I have it installed.
http://www.amazon.com/gp/aw/d/B00L2PDY6O/ref=redir_mdp_mobile?ref_=cm_sw_r_udp_awd_O29Ztb0F1CDPQ
Sent from my VS985 4G using XDA Free mobile app
I received mine today. Installation was very easy and thus far I'm very pleased with the selection. I was going to go with iLoome but this screen protector is definitely worth it!
Update *
So I took my Spigen slim case off and I just realized when I turn my phone horizontally, screen facing up, and look at the screen protector...you can barely tell it is on! This thing is super thin and I didn't realize it after I put it on because I slipped the case on prior to putting the screen protector on. Quite a difference from the iLoome I had on my iPhone 5S! This thing is holding up great as well! So far no scratches and smudges wipe right off.
It is slightly smaller than the full G3 screen, but just slightly!
Sent from my VS985 4G using XDA Free mobile app
Just got mine today too. The fit is good although there is a 1mm gap on each side. I love how the edges are curved though. Definitely worth the money.
Installation
oo3 said:
Just got mine today too. The fit is good although there is a 1mm gap on each side. I love how the edges are curved though. Definitely worth the money.
Click to expand...
Click to collapse
How difficult is the installation of the Tech Glass screen protector? Does it install dry?
swcunn said:
How difficult is the installation of the Tech Glass screen protector? Does it install dry?
Click to expand...
Click to collapse
Not hard at all. Yes it was a dry install. I just started on the earphone side and used a credit card to put it on evenly.
Also another way to install these is to get some tape.
Align the screen like you want it and make a hinge out of tape.
Remove the adhesive while the protector is still hinged and slowly close the protector down on the glass.
A little late to the party, but I HIGHLY suggest this. I already had a small scratch on my screen, I am quite careful with my phones, the screen is not impervious to scratches, The Skinomi went on without any hassle, super easy dry install, clean screen, peel plastic, and drop it on. Zero bubbles, feels as good if not better than the screen itself and I haven't noticed a single issue with dead spots or hitting icons etc.
No better $15 spent imo. I had some very annoying scratches on my G2 screen after about 6 months, very apparent in the sunlight, I imagine this is a pretty easy replacement if I get scratches on this screen.