hi good morn frens..i need help urgent
jus now tried to flash slimrom on my s3.done everything said in instructions.
each n evry step but s3 stuck at SAMSUNG LOGO..
booted into recovert mode.factory reset.wipe cache.wipe dalvik cache.everything done.but stuck at samsung logo.
i can flash stock firmware again n proceed the whole process again but tel me where i was going wrong
need urgent help
by the way i flashed the latest 6.2 bulid rom
update -- jus now flashed stock firmware,n everything fine.
tel frens wat to do now..
srinivasmv419 said:
update -- jus now flashed stock firmware,n everything fine.
tel frens wat to do now..
Click to expand...
Click to collapse
Did u format/system?
srinivasmv419 said:
hi good morn frens..i need help urgent
jus now tried to flash slimrom on my s3.done everything said in instructions.
each n evry step but s3 stuck at SAMSUNG LOGO..
booted into recovert mode.factory reset.wipe cache.wipe dalvik cache.everything done.but stuck at samsung logo.
i can flash stock firmware again n proceed the whole process again but tel me where i was going wrong
need urgent help
by the way i flashed the latest 6.2 bulid rom
Click to expand...
Click to collapse
galaxys3lover said:
Did u format/system?
Click to expand...
Click to collapse
hi dude,
to do wipe read this:
[Tool][Aroma]:Mega Wipe:Super Wipe:Factory Reset:Simple Wipe::For Flashaholics
http://forum.xda-developers.com/showthread.php?t=1832326
to others informations
Samsung Galaxy S III/GT-I9300 - Wiki - look this ... many and good links - how to install , root, recover , etc ...
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_III/GT-I9300
best regards
srinivasmv419 said:
update -- jus now flashed stock firmware,n everything fine.
tel frens wat to do now..
Click to expand...
Click to collapse
if you did the following I am not sure how to help:
format system, data, cache etc. (best I guess would be to do a mega wipe)
flash slim
without reboot flash slim gapps
wipe cache, dalvik (just to be sure)
fix permissions (normally not necessary)
reboot
jpopsukibr said:
hi dude,
to do wipe read this:
[Tool][Aroma]:Mega Wipe:Super Wipe:Factory Reset:Simple Wipe::For Flashaholics
http://forum.xda-developers.com/showthread.php?t=1832326
to others informations
Samsung Galaxy S III/GT-I9300 - Wiki - look this ... many and good links - how to install , root, recover , etc ...
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_III/GT-I9300
best regards
Click to expand...
Click to collapse
Yes i use mega wipe sometimes too , but when you have a problem , it's better to do it manually,..
Sent from my GT-I9300 using Tapatalk 2
---------- Post added at 01:37 PM ---------- Previous post was at 01:34 PM ----------
srinivasmv419 said:
update -- jus now flashed stock firmware,n everything fine.
tel frens wat to do now..
Click to expand...
Click to collapse
chrismast said:
if you did the following I am not sure how to help:
format system, data, cache etc. (best I guess would be to do a mega wipe)
flash slim
without reboot flash slim gapps
wipe cache, dalvik (just to be sure)
fix permissions (normally not necessary)
reboot
Click to expand...
Click to collapse
Follow this. .. but don't use mega wipe now. . Do it manually and flash again. . If it doesn't work, . You use mega wipe and try again.
Sent from my GT-I9300 using Tapatalk 2
well have to tel one imp thing.last week i flashed slimrom build 6 which al went well.but due to some reasons i deleted n flashed stock rom agan
but last night i flashed build 6.2 slimrom.here i have done other job too while flashing slimrom build 6.2
i formatted everything in recovvery mode..n flashed slimrom then without reboot gapps too
also flashed BOEFFLA KERNEL WITHOUT REBOOT
is thhis the BLUNDER I HAVE DONE.only for this reason am not able to boot into slimrom??pls tel
HAPPY UPDATE- this time flashed stable build 6 with da above said instructions.with FIX PERMISSIONS.
donno if its wrong wth 6.2 weekly bui;d or wat else..but finally flashed SLIMROM SUCCESSFULLY.happy now
thanks lottt
Boeffela does not support aosp of I am not wrong, here you got your boot loop
Sent from my GT-I9300 using xda app-developers app
galaxys3lover said:
Yes i use mega wipe sometimes too , but when you have a problem , it's better to do it manually,..
Sent from my GT-I9300 using Tapatalk 2
---------- Post added at 01:37 PM ---------- Previous post was at 01:34 PM ----------
Follow this. .. but don't use mega wipe now. . Do it manually and flash again. . If it doesn't work, . You use mega wipe and try again.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
srinivasmv419 said:
well have to tel one imp thing.last week i flashed slimrom build 6 which al went well.but due to some reasons i deleted n flashed stock rom agan
but last night i flashed build 6.2 slimrom.here i have done other job too while flashing slimrom build 6.2
i formatted everything in recovvery mode..n flashed slimrom then without reboot gapps too
also flashed BOEFFLA KERNEL WITHOUT REBOOT
is thhis the BLUNDER I HAVE DONE.only for this reason am not able to boot into slimrom??pls tel
HAPPY UPDATE- this time flashed stable build 6 with da above said instructions.with FIX PERMISSIONS.
donno if its wrong wth 6.2 weekly bui;d or wat else..but finally flashed SLIMROM SUCCESSFULLY.happy now
thanks lottt
Click to expand...
Click to collapse
chrismast said:
Boeffela does not support aosp of I am not wrong, here you got your boot loop
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
yes, I do agree with @galaxys3lover. Automatic scripts are goods, but in this particular case a manual wipe was better.
i am a lill paranoic ... i do "erase everything" before install a new rom, and I try follow the developer instructions (if he say ... full wipe is the recommended ... yeah .. i will do ... if we will have fc or problems or strange things... no regrets ... lol)
@chrismast i was reading the slim rom thread and in instructions:
"From another JB or ICS Rom to SlimBean
Download device_x.x.zip, slim_gapps.zip.
Enter CWM, wipe data, format system ( in mounts and storage)
Flash Device_x.x.zip***, then MUST flash slim_gapps.zip (other files optional)
*** - If the flash is too quick ( < 5 seconds or so), reflash device before flashing common or other zip files."
*** i do really doesn't understand this 5 secs ... some other xda slim user could bring us a enlightment for this question. maybe a slim cm aosp based rom particular issue? i don't know
"Upgrading Slim Bean
Unless we specify otherwise in changelog
Reboot to recovery, wipe cache, dalvik cache then just flash your device zip."
and the 4.2.2 Build 6 ChangeLog
"Attention:
Due to the updated TRDS 2.0 code, you HAVE TO download and flash the new gapps packages this time."
references
http://slimroms.net/index.php/installation
http://slimroms.net/index.php/changelog
maybe a "forget step"? or the problem was related to Boeffla Kernel
"Note: This kernel is only for Samsung based Jelly Bean (Android 4.1.x) roms!!! Do not install it on CM or AOSP based roms!!!
Also do NOT install it on any Samsung 4.2.x based Roms!!! You will just get a boot loop!!!" - a quote of @AndiP - red color is not mine ... lol
[KERNEL] [Samsung JB] Boeffla-Kernel 2.11 (21-05-2013)
http://forum.xda-developers.com/showthread.php?t=1964572
and i am happy that you did flashed successfully slim rom and the other xda members did helped you
:good:
best regards guys
even oreyang
chrismast said:
Boeffela does not support aosp of I am not wrong, here you got your boot loop
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Not at all, i will share personal experience.
Few days ago... I flashed SlimRom and everything was OK, however, due to not reading and having an anxiety about having Boeffla, i flashed Boeffla from CWM and i get a Soft Brick but thank i had battery, i could revive via Back up and Restore (NAndroid).
Conclusion: Boeffla do not support AOSP nor AOKP
"would appreciate correct me if I am wrong, if not, also let me know" :good:
Related
please help me !
my x10i with official kernal and official android 2.3.3 [ rooted n intalled xrecovery0.3 ]
i flashed v8.2 main rom, battery add- on n screenshoot add- on.
after tht, i flashed doom kernal FS n wifi module.
thn i reboot, it keep stuck at XPERIA boot animation, i tried to take out battery n put in agn for 1x times n it still not working.
looking for pro's help !!!:crying:
Lowkey_Xboy said:
please help me !
my x10i with official kernal and official android 2.3.3 [ rooted n intalled xrecovery0.3 ]
i flashed v8.2 main rom, battery add- on n screenshoot add- on.
after tht, i flashed doom kernal FS n wifi module.
thn i reboot, it keep stuck at XPERIA boot animation, i tried to take out battery n put in agn for 1x times n it still not working.
looking for pro's help !!!:crying:
Click to expand...
Click to collapse
dude flash the kernel again first....
then boot to xrecovery or cwm recovery wicheva installed.... then do facotry reset/wipe data then wipe cache partition and wipe dalvik cache....
then install zip from sdcard.... and then flash the addons and wifi modules....
nd then boot.... and plz dont be afraid first boot takes some time around 3 4 mins
rohit25 said:
dude flash the kernel again first....
then boot to xrecovery or cwm recovery wicheva installed.... then do facotry reset/wipe data then wipe cache partition and wipe dalvik cache....
then install zip from sdcard.... and then flash the addons and wifi modules....
nd then boot.... and plz dont be afraid first boot takes some time around 3 4 mins
Click to expand...
Click to collapse
thx dude !
it worked !
but cant solve wifi prob
http://forum.xda-developers.com/images/smilies/confused.gif
you're sure that you had flashed the wifi module?
BordenG said:
you're sure that you had flashed the wifi module?
Click to expand...
Click to collapse
ya, but i flash it when reboot the rom install is done:silly:
Lowkey_Xboy said:
ya, but i flash it when reboot the rom install is done:silly:
Click to expand...
Click to collapse
matey....
very easy just boot to recovery and in advanced option select fix permission and then flash wifi fix.zip....
to be honest the wifi addon fix.zip has never worked in whiceva ROM i tried so i genrally installed a rom with wifi built into the kernel
pm me if you still face ny problem i would be glad to help
VOILA
rohit25 said:
matey....
very easy just boot to recovery and in advanced option select fix permission and then flash wifi fix.zip....
to be honest the wifi addon fix.zip has never worked in whiceva ROM i tried so i genrally installed a rom with wifi built into the kernel
pm me if you still face ny problem i would be glad to help
VOILA
Click to expand...
Click to collapse
Dude, it's worked !
LOVE U FOREVER
really thx for help <3
[ I am a beginner ] :fingers-crossed:
Lowkey_Xboy said:
Dude, it's worked !
LOVE U FOREVER
really thx for help <3
[ I am a beginner ] :fingers-crossed:
Click to expand...
Click to collapse
Dude remember one thing, when you flash ROMS restart the ROM then come back to recovery and flash wifi fix that always works.. Let ROM settle.. Also when you flash addon package too many bloatware come you can remove them by using flashtool... Also its a good practice to wipe your MMC clean before you install a new ROM.. BTW V8.2, is it Xperia S port? if it is then there is 8.3 update available. All you need to do is flash it over existing V8.2 (not a fresh install)
udupa82 said:
Dude remember one thing, when you flash ROMS restart the ROM then come back to recovery and flash wifi fix that always works.. Let ROM settle.. Also when you flash addon package too many bloatware come you can remove them by using flashtool... Also its a good practice to wipe your MMC clean before you install a new ROM.. BTW V8.2, is it Xperia S port? if it is then there is 8.3 update available. All you need to do is flash it over existing V8.2 (not a fresh install)
Click to expand...
Click to collapse
now using x10s v9 :good: Best rom for x10 ever :victory:
headphone jack does not work !!!!!!!!!!!!!
So what ?! Opening a new thread with saying what your problem is, without providing a logcat or something won't solve your problem ! ! ! ! !
Maybe there's just something in the jack, like some sand.....
So what is your problem EXACTLY ? ? ? ? ?
Sent from my GT-S5830i using xda premium
headphone jack does not work after you install this rom
This is a known problem.Wait till dev finds a solution.
On Jellyblast 3.0.3
caution!
DO NOT REMOVE CHROME!
I did like 6 reflashes of this ROM and couldn't figure out what was causing the random forcecloses. And then it hit me - the first thing I always did was removing (pretty useless anyway) Chrome. I have no idea how and why but this triggered all sorts of problems. Did a fresh reinstall and left the damn thing alone - working perfectly now.
Ok this is getting on my nerves. The phone restarted when making a call, then rebooted to black screen and I had to wipe cache/data to make it boot again. These custom ROMs and kernels are nice and all but perhaps one should wait for a matured release that is relatively bug free
i flash simplicity v2 first and reboot , after that i flash jelly blast . that will make headset working ( sr my english )
nymphchan said:
i flash simplicity v2 first and reboot , after that i flash jelly blast . that will make headset working ( sr my english )
Click to expand...
Click to collapse
You had jellyblast before you flashed simplicity?or returned to stock?
On Jellyblast 3.0.3
i returned to stock and flash simplicyty 2 , then i reboot and flash jelly blast 3
nymphchan said:
i returned to stock and flash simplicyty 2 , then i reboot and flash jelly blast 3
Click to expand...
Click to collapse
without format and deleting cache?!?
no. dont need wipe anything , just flash jelly blast rom after u flash simplicity + reboot android
i was flash in stock rom, wipe all, return to stock recovery and flash... my headphone jack work fine
Alex19Gam said:
i was flash in stock rom, wipe all, return to stock recovery and flash... my headphone jack work fine
Click to expand...
Click to collapse
I didn't know what exactly you did, can you explain it better?
I did this Stock Rom stock kernel - Wipe Data/cache/dalvik then flash Jelly blast stock kernel- No working headset
use odin to flash stock rom . flash simplicity v2 with CWM and reboot . after that , flash jelly blast v3 ( sr my bad english )
http://www.facebook.com/groups/galaxy5830i/492770474096432/?notif_t=group_comment
nymphchan said:
use odin to flash stock rom . flash simplicity v2 with CWM and reboot . after that , flash jelly blast v3 ( sr my bad english )
http://www.facebook.com/groups/galaxy5830i/492770474096432/?notif_t=group_comment
Click to expand...
Click to collapse
I solved it by installing an older rev of rafaels kernel..
On Jellyblast 3.0.3
Install soundabout app.... and it will start working...
Sent from my GT-S5830i using xda premium
(Stolen?)
bounty hunter14 said:
Install soundabout app.... and it will start working...
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
I posted that on the original ROM thread
bounty hunter14 said:
Install soundabout app.... and it will start working...
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
This method works for normal media..But FM still doesn't work
From my jellyblast powered Galaxy acei
Than please tell me how u got rid of this problem completely....and the link to file....
Sent from my GT-S5830i using xda premium
Help me plz
I'm using Rom MinCr,but now i want to use Rom Jellybean.Should i just install the new Rom,or i have to wipe the Rom MinCr.Can you tell me what should i do?
And,one more question,i see we can update Android Ver 4.0 by updating Rom Jellybean.Apps which works on android ICS like Camera JB,...Does it work on this Rom(Jellybean)
---------- Post added at 05:55 PM ---------- Previous post was at 05:49 PM ----------
I'm sorry for my English.In last replying,i mean update by JellyBlast.
Guys i Have xperia sola with Stock ICs Indian B.10 not the latest 54
so which the best CM for me And what Gapps for it to flash with it and how to install it anyway
i have unofficial jelly bean from minjuin so if there is the best cm for jelly bean tell me to install it and i will
just give me all i need to install it and instruction please ? and thanks
SpeeDdead said:
Guys i Have xperia sola with Stock ICs Indian B.10 not the latest 54
so which the best CM for me And what Gapps for it to flash with it and how to install it anyway
i have unofficial jelly bean from minjuin so if there is the best cm for jelly bean tell me to install it and i will
just give me all i need to install it and instruction please ? and thanks
Click to expand...
Click to collapse
For now I suggest you to install cm9 because is almost full working. I don't personally recommend you cm10 as it's in a development phase and presents issues.
To install cm9, :
1)copy the latest fxp tom on your phone
2)extract from the fxp file you downloaded the boot.img and flash it via flashtool
3) enter recovery wipe cache,dalvik cache and do a factory reset.
4) install cm9 and after that install immediately gapps. Google for gapps and make sure that you install the one for ics.
5) reboot and enjoy!
If you want to install the cm10 just do the same procedure with cm10 fxp latest files and install gapps for jb.
DaRk-L0rD said:
For now I suggest you to install cm9 because is almost full working. I don't personally recommend you cm10 as it's in a development phase and presents issues.
To install cm9, :
1)copy the latest fxp tom on your phone
2)extract from the fxp file you downloaded the boot.img and flash it via flashtool
3) enter recovery wipe cache,dalvik cache and do a factory reset.
4) install cm9 and after that install immediately gapps. Google for gapps and make sure that you install the one for ics.
5) reboot and enjoy!
If you want to install the cm10 just do the same procedure with cm10 fxp latest files and install gapps for jb.
Click to expand...
Click to collapse
thanks alot for trying to help me , i did exactly what u said the problem was Gapps installed but when trying to open play store or other gapps , its force close , i am sure thats was gapps for ics and its the latest one too , tried another clean install and this time it's not booting so , i removed and got back to stock again and downloaded this one , http://forum.xda-developers.com/showthread.php?t=2233536 i installed it and it works like charm ^_^ and i did a battery calibration this way , full charge and hit calibrate , then full discharging to shut down then full charge again ^_^ just tell me is it good rom ? or there is a bugs i don't see ? cause i didn't tried the 3g yet and somethings but i tried everything else and all works great , srry if being annoying i am just noob
No need to ask sorry mate. The only bug as far as I know is the fm radio. I used this Rom some time before and I can tell you that cm is a great Rom!
DaRk-L0rD said:
No need to ask sorry mate. The only bug as far as I know is the fm radio. I used this Rom some time before and I can tell you that cm is a great Rom!
Click to expand...
Click to collapse
U R The best , Thanks alot , and about the radio i got 1 channel to work Wifi Sure , thanks again for helping me
plz help how to set cyanogenmod
hey plz help me how to set cyanogenmod m nt getting anything..what is gapps n all..i have xperia sola ics rooted n bootloader unlocked..plzzzzzzz help..
manishpaspohe said:
hey plz help me how to set cyanogenmod m nt getting anything..what is gapps n all..i have xperia sola ics rooted n bootloader unlocked..plzzzzzzz help..
Click to expand...
Click to collapse
Gapps are Google apps. Playstore, gmail etc.
Just follow the steps already mentioned before and you will be able to install cyanogenmod mate.
DaRk-L0rD said:
Gapps are Google apps. Playstore, gmail etc.
Just follow the steps already mentioned before and you will be able to install cyanogenmod mate.
Click to expand...
Click to collapse
i downloaded fxp..but when i copy boot.img file it says file is corrupt..error code 0x80004005..plz help..
manishpaspohe said:
i downloaded fxp..but when i copy boot.img file it says file is corrupt..error code 0x80004005..plz help..
Click to expand...
Click to collapse
File is corrupted. Download it again mate.
DaRk-L0rD said:
File is corrupted. Download it again mate.
Click to expand...
Click to collapse
n hw to flash boot.img..??please brief me..
manishpaspohe said:
n hw to flash boot.img..??please brief me..
Click to expand...
Click to collapse
First of all remember that the codename for Sony Xperia Sola is Pepper. Don't install any other's devices firmware because you will have serious troubles.
So go here: http://dfiles.eu/folders/H4B5M4XR0
Download the file named FXP216-cm-9-20130419-UNOFFICIAL-pepper.zip
Transfer the file you downloaded on you phone.
From the file you downloaded extract the boot.img file and place it on your desktop.
Open flashtool. Click fastboot mode and flash the boot.img.
Once done flashing the file, turn on your device and press continuously volume down button. You will enter in cmw.
Wipe cache, do a factory reset and from advanced menu wipe dalvik cache.
After that, go to install zip from sdcard.
Find the file you previously transferred on you phone and install it.
Reboot and you are done.
For any issues let me know.
manishpaspohe said:
n hw to flash boot.img..??please brief me..
Click to expand...
Click to collapse
okayy i got hw to flash boot.img..bt problem is dat my phone is nt getting in cwm..i got links of cwm kernels bt dey r nt working..please provide me link..plz it will be gr8 help
manishpaspohe said:
okayy i got hw to flash boot.img..bt problem is dat my phone is nt getting in cwm..i got links of cwm kernels bt dey r nt working..please provide me link..plz it will be gr8 help
Click to expand...
Click to collapse
Pretty strange they don't work mate. Did you do exactly how I told you? Did you try also with volume up?
DaRk-L0rD said:
Pretty strange they don't work mate. Did you do exactly how I told you? Did you try also with volume up?
Click to expand...
Click to collapse
thank u veryyyy muchhhh
manishpaspohe said:
thank u veryyyy muchhhh
Click to expand...
Click to collapse
Worked?
ok guys, i need some tips..my xperia sola stuck at cyanogenmod logo???? what I'm missing here???
Wipe dalvik, wope cache, wipe data. After this it should boot. Did you got any error during flashin?
Sent from my MT27i using xda app-developers app
SpeeDdead said:
Guys i Have xperia sola with Stock ICs Indian B.10 not the latest 54
so which the best CM for me And what Gapps for it to flash with it and how to install it anyway
i have unofficial jelly bean from minjuin so if there is the best cm for jelly bean tell me to install it and i will
just give me all i need to install it and instruction please ? and thanks
Click to expand...
Click to collapse
fxp216 PEPPER ... dont download anything else you're gonna have a big problem
iLouKaXzZ said:
fxp216 PEPPER ... dont download anything else you're gonna have a big problem
Click to expand...
Click to collapse
Thank you mate, I will try your suggestion because I'm new with CM custom rom.
Hello!
I've got Sola with Unofficial JB stock rom by @munjeni (his kernel too, ofcourse). And I've got couple of questions:
1. Does 4.2.2 Jelly Bean Cyanogenmod 10.1 for Xperia Sola MT27i works with Munjeni's kernel or should I flash the one inside CM build? Apparently there some bugs there , like wifi and bluetooth.
2. Can I install CM 9 on my current kernel?
3. What's the best option here , CM9 (stable) or CM10.1?
Thanks in advance for answers, I realize these are noob questions, but I'm just netering the world of flashing :/
i have tried all ways and followed your instructions too. but when i select reboot system from recovery it reboot and start rebooting from kernel... i tried all ics kernels ... help me i will press thanks button for u. @jatinrungta for zperience v1
aman.goel.hry said:
i have tried all ways and followed your instructions too. but when i select reboot system from recovery it reboot and start rebooting from kernel... i tried all ics kernels ... help me i will press thanks button for u. @jatinrungta for zperience v1
Click to expand...
Click to collapse
Did you do a full wipe? Use the kernel provided in ROM only, with wipe before and after...
Hey,
This is the wrong topic. Post this on the Q and A forum not general. I am not a mod so cant move it for ya
Sent from my LT22i using xda app-developers app
mirost1 said:
Did you do a full wipe? Use the kernel provided in ROM only, with wipe before and after...
Click to expand...
Click to collapse
that zperience rom pack doesnot contain any kernel in itself ....so we have to use on anykernel but i only get bootlops..
aman.goel.hry said:
that zperience rom pack doesnot contain any kernel in itself ....so we have to use on anykernel but i only get bootlops..
Click to expand...
Click to collapse
try this
flash stock c.10
do a full wipe (even internal storage)
root the phone
flash zperience
The purpose to create this thread is to unite all s4 i9515 user on a same page...because i9515 is a different device...here we can share our issues and will search for possible solution...
A CLEAN INSTALL.....!!!
To install a Touch-Wiz ROM on i9515 the following steps are used:
1.Using TWRP wipe Dalvik & Cache, System, Internal memory (optional)
2.Flash the ROM you want (followed by Aroma in some cases)
3.Wipe Dalvik & Cache
4.Flash the Kernel (Stock or Imperium)
5.Wipe again Dalvik & Cache
6.Reboot and wait for the first boot
Here is an example of touch-wiz ROM
https://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-super-wizcyan-29-nov-15-t3259562
To install an AOSP, Lineage OS or Resurrection Remix (RR) ROM etc.. on i9515 the following steps are used:
1.Using TWRP wipe Dalvik & Cache, System, Internal memory (optional)
2.Flash the ROM you want
3.Wipe Dalvik & Cache
4.Flash Gapps (I Recommend Pico)
5.Wipe again Dalvik & Cache
6.Reboot and wait for the first boot
Here is the example of RR ROM
https://forum.xda-developers.com/galaxy-s4/general/resurrection-remix-5-8-3-samsung-galaxy-t3593172
KERNEL for i9515
1. Stock
https://drive.google.com/file/d/0Bz7LHiBoj3tkSHFaQXFYRWV0Ujg/view?usp=drivesdk
2. Imperium
https://drive.google.com/file/d/0Bz7LHiBoj3tkZWw4QUdYMGU0T00/view?usp=drivesdk
Can we please have Imperium kernel 5.2?
Refayatul said:
Can we please have Imperium kernel 5.2?
Click to expand...
Click to collapse
There is no such version for i9515...
zafarali1981 said:
There is no such version for i9515...
Click to expand...
Click to collapse
I see you have posted the link for the i9515.. Does the kernel work with lineageOS based roms?
JaccoProduction said:
I see you have posted the link for the i9515.. Does the kernel work with lineageOS based roms?
Click to expand...
Click to collapse
I didn't try the kernels on lineageOS...but these kernel nicely work in touch-wiz ROM...
Can you improve something in the kernel that will help reduce the stuttering?
Otherwise the kernel works perfect for me.
gomangoo said:
Can you improve something in the kernel that will help reduce the stuttering?
Otherwise the kernel works perfect for me.
Click to expand...
Click to collapse
Sorry dear… I just share tested things for i9515…
Does the imperium kernel work with the Wizcyan rom? Right now I use the i9515L kernel since the i9515 has wifi problems... But that doesn't mean I don't have any problems right now. The phone gets random restarts, bluetooth isn't working, as well as the hotspot. So, will this kernel fix these problems?
raul43 said:
Does the imperium kernel work with the Wizcyan rom? Right now I use the i9515L kernel since the i9515 has wifi problems... But that doesn't mean I don't have any problems right now. The phone gets random restarts, bluetooth isn't working, as well as the hotspot. So, will this kernel fix these problems?
Click to expand...
Click to collapse
Yes imperium kernel works fine in wizcyan rom...
zafarali1981 said:
Yes imperium kernel works fine in wizcyan rom...
Click to expand...
Click to collapse
I installed the kernel and now everything works fine. Thank you very much!
Hello, Cristian here, i want to thank you very much for your contribuition to our version of the s4 device whick is I9515 Value edition.
Already downloaded the stock kernel and all i hope is to be compatible with the latest version of wizcyan 4.1. But as far as it seen, should be effective unto this aspect and overall usage.
I will reply after i install the stock rom over clean install wizcyan 4.1, including the mini update attached to their official post.
mostevil94 said:
Hello, Cristian here, i want to thank you very much for your contribuition to our version of the s4 device whick is I9515 Value edition.
Already downloaded the stock kernel and all i hope is to be compatible with the latest version of wizcyan 4.1. But as far as it seen, should be effective unto this aspect and overall usage.
I will reply after i install the stock rom over clean install wizcyan 4.1, including the mini update attached to their official post.
Click to expand...
Click to collapse
My pleasure...
I am back with the results.
I have just installed latest version of Wizcyan 4.1 with the update attached after it, applied the required addons i choosed and then ive installed the stock kernel oc3.
Wifi is not working, won't turn on
Right now i am taking the imperium kernel from this thread and will write my results later.
mostevil94 said:
I am back with the results.
I have just installed latest version of Wizcyan 4.1 with the update attached after it, applied the required addons i choosed and then ive installed the stock kernel oc3.
Wifi is not working, won't turn on
Right now i am taking the imperium kernel from this thread and will write my results later.
Click to expand...
Click to collapse
Dear
1.Using TWRP wipe Dalvik & Cache, System, Internal memory (optional)
2.Flash the ROM you want (followed by Aroma in some cases)
3.Wipe Dalvik & Cache
4.Flash the Kernel (Stock or Imperium)
5.Wipe again Dalvik & Cache
6.Reboot and wait for the first boot
7. If you want to install updates then do it at the end..
As i said before, this method, including all other attempts in making the usage of stock kernel active was basically rejected by this S4 JFVELTE I9515 VALUE EDITION phone and will not work no matter what.
The good news is that the Imperium kernel is functioning well and as far as i observed, it behaves fine. I will keep testing its functions and if i will find any bug i will post it here.
Thanks.
mostevil94 said:
As i said before, this method, including all other attempts in making the usage of stock kernel active was basically rejected by this S4 JFVELTE I9515 VALUE EDITION phone and will not work no matter what.
The good news is that the Imperium kernel is functioning well and as far as i observed, it behaves fine. I will keep testing its functions and if i will find any bug i will post it here.
Thanks.
Click to expand...
Click to collapse
Imperium kernel works for you...That's nice....i personally tested both the kernel...works great for me...
Everything is functioning very well, except for sim card, i get the message : the sim card was ejected so i have to press on restart.. it is too often, i do not understand why i have checked the sim card. Using the imperium kernel for wizcyan 4.1.
mostevil94 said:
Everything is functioning very well, except for sim card, i get the message : the sim card was ejected so i have to press on restart.. it is too often, i do not understand why i have checked the sim card. Using the imperium kernel for wizcyan 4.1.
Click to expand...
Click to collapse
What baseband u have?