Related
I did a search on PPCGeeks, XDA, and Google, and couldn't find any app to make the touch screen on the Titan interactive - similar to the way the Voyager touch screen works (quick vibrate when the screen is touched).
Is there any app like this? If not, can someone make one?
Thanks!
You would think HTC being one (if not THEE one) #1 Smartphone manufacture that would have SOMETHING similiar to the iphone or Voyager. The HTC Cube to me is very "amatuer" looking compared to the iphone and Voyager UI. Even microsoft couldn't make anything similiar...hopefully WM7 will blow us away.
I agree that the Cube looks pretty basic (that's why I won't put it on my phone, but I do have the TouchFLO).
But what I'm looking for is for the phone to do a very quick vibrate whenever the screen is touched.
That technology is called Haptics and it is much more than just the phone vibrating. Haptics allows you to physically feel a vibration exactly on the spot of the screen you are touching. Your phone has to have Haptics vibration built into it to use it and there isn't a single HTC phone out there using the said technology.
http://www.immersion.com/corporate/press_room/what_is_haptics.php
worth a shot
vaxick said:
That technology is called Haptics and it is much more than just the phone vibrating. Haptics allows you to physically feel a vibration exactly on the spot of the screen you are touching. Your phone has to have Haptics vibration built into it to use it and there isn't a single HTC phone out there using the said technology.
http://www.immersion.com/corporate/press_room/what_is_haptics.php
Click to expand...
Click to collapse
Indeed.
That said, I'm still interested in any app that does simply what whiteblazer01 asked for. I'm always looking over my fingers when I'm trying to dial a phone number. I'd be willing to give a simple touch-response app a shot.
Anyone?
ryanshepherd said:
Indeed.
That said, I'm still interested in any app that does simply what whiteblazer01 asked for. I'm always looking over my fingers when I'm trying to dial a phone number. I'd be willing to give a simple touch-response app a shot.
Anyone?
Click to expand...
Click to collapse
I have been looking into this also. Especialy when i use the media player or just the main screen shortcuts.
In the mean time I was able to find a CAB somewhere in this forum that enables vibration feedback when you dial a number. It replaces the tone with vibration. I hope you guys like it. (Sorry I dont have support for it because I am not the original creator of this CAB)
Make sure that once you install the CAB that you soft reset after.
Hope you like it.
That's exactly what it is - Haptics. Thanks for the link. The program [email protected]$ put a link to (thanks!) works on the keypad, but it really doesn't feel like the Haptics system. O well, its still cool though.
I found a link to another thread on this forum for the same thing. http://forum.xda-developers.com/showthread.php?p=1685449
whiteblazer01 said:
That's exactly what it is - Haptics. Thanks for the link. The program [email protected]$ put a link to (thanks!) works on the keypad, but it really doesn't feel like the Haptics system. O well, its still cool though.
I found a link to another thread on this forum for the same thing. http://forum.xda-developers.com/showthread.php?p=1685449
Click to expand...
Click to collapse
I was thinkin about how we can make the phone vibrate when we tap the screen in any application instead of only the dial pad.
I came up with a theory that might give us some type of haptics feed back. It might not be exactly like haptics but it could make the phone vibrate.
There is a feature in our phone that can enable the phone to play a sound when we tap the screen for any reason. I was thinking why not replace the sound with just vibration like the CAB that changes the sound to vibration on the dialer?
Im not experienced at programming, but I am willing to take a shot into making this possible. Maybe some one can get a hold of a good programmer or some one good at registry tweaks to make this possible.
Just an idea
steps said:
You would think HTC being one (if not THEE one) #1 Smartphone manufacture that would have SOMETHING similiar to the iphone or Voyager. The HTC Cube to me is very "amatuer" looking compared to the iphone and Voyager UI. Even microsoft couldn't make anything similiar...hopefully WM7 will blow us away.
Click to expand...
Click to collapse
Voyager is hella gay
[email protected]$ said:
I have been looking into this also. Especialy when i use the media player or just the main screen shortcuts.
In the mean time I was able to find a CAB somewhere in this forum that enables vibration feedback when you dial a number. It replaces the tone with vibration. I hope you guys like it. (Sorry I dont have support for it because I am not the original creator of this CAB)
Make sure that once you install the CAB that you soft reset after.
Hope you like it.
Click to expand...
Click to collapse
Great Idea [email protected]$, deffinately move forward with it, Ive been using the phonepadvibrate (essentially the same as what you posted) for well over 2 months now and love it. If you could do the same with the normal touch screen it would be amazing.
Yes its not full haptics, but in my opinion it really doesnt need to be. some sort of physical feedback (ie a slight vibration) would be great when working with the touch screen.
[email protected]$ said:
I was thinkin about how we can make the phone vibrate when we tap the screen in any application instead of only the dial pad.
I came up with a theory that might give us some type of haptics feed back. It might not be exactly like haptics but it could make the phone vibrate.
There is a feature in our phone that can enable the phone to play a sound when we tap the screen for any reason. I was thinking why not replace the sound with just vibration like the CAB that changes the sound to vibration on the dialer?
Im not experienced at programming, but I am willing to take a shot into making this possible. Maybe some one can get a hold of a good programmer or some one good at registry tweaks to make this possible.
Just an idea
Click to expand...
Click to collapse
Carlos, I definitely agree, I would love to have that whenever the screen vibrated. Although, I don't know who would be willing to do that. I remember when I had the Apache (XV6700), I thought it would be cool if someone could make the LED lights on top into indicator lights for the shift and caps keys - which never happened (I don't know how, otherwise I would do it myself).
In fact, I wonder if someone can make a cab to have the shift and caps buttons make the indicator lights turn on whenever the buttons are pushed, not just when shift lock or caps lock are enabled.
Paul
whiteblazer01 said:
Carlos, I definitely agree, I would love to have that whenever the screen vibrated. Although, I don't know who would be willing to do that. I remember when I had the Apache (XV6700), I thought it would be cool if someone could make the LED lights on top into indicator lights for the shift and caps keys - which never happened (I don't know how, otherwise I would do it myself).
In fact, I wonder if someone can make a cab to have the shift and caps buttons make the indicator lights turn on whenever the buttons are pushed, not just when shift lock or caps lock are enabled.
Paul
Click to expand...
Click to collapse
It is very possible. I found other sources and they have some sort of program / prototype that can make this happen but it doesnt work on every tap of the screen.
What I want to do is make mine work on every tap of the screen but have the ability to turn it off and on to save power. Like turning the notification for the sound to play when you tap the screen on and off.
So far I have planned some steps to do it through the registry but since I am not an expert at programming like others are here it might take a while.
But any help is very welcome to complete this project and make it available for all.
As to changing the LED's on your phone. I think no2chem and some other guys found a way to customize your LED settings, but I'm not sure if it will be custom enough to indicate caps or shift. Maybe in the near future.
whiteblazer01 said:
I did a search on PPCGeeks, XDA, and Google, and couldn't find any app to make the touch screen on the Titan interactive - similar to the way the Voyager touch screen works (quick vibrate when the screen is touched).
Is there any app like this? If not, can someone make one?
Thanks!
Click to expand...
Click to collapse
this is a oem out there i havent seen Cab for it
Dc_striker said:
this is a oem out there i havent seen Cab for it
Click to expand...
Click to collapse
I am sure you probably have. I have the copy of the program that enables this feature. I believe it is extracted from a phone that has haptic feed back. But it is an executable.
This program is faulty. It doesn't respond on every tap and has performance issues. Other then that there hasn't been another one developed.
I'm trying to find a way to fix the issues of of the one that I found. Maybe by creating a new way to enable haptic feed back like I posted on previews posts, but it might take time to develop because I'm still learning how to mess with WM Reg. and programming.
[email protected]$ said:
I am sure you probably have. I have the copy of the program that enables this feature. I believe it is extracted from a phone that has haptic feed back. But it is an executable.
This program is faulty. It doesn't respond on every tap and has performance issues. Other then that there hasn't been another one developed.
I'm trying to find a way to fix the issues of of the one that I found. Maybe by creating a new way to enable haptic feed back like I posted on previews posts, but it might take time to develop because I'm still learning how to mess with WM Reg. and programming.
Click to expand...
Click to collapse
i still havent tried the program out yet i really dont see the use for it
Let me know what you find out Carlos. I would agree with you that it may be better to have the phone vibrate maybe when any button is pushed instead of anytime the screen is tapped (or maybe have the option to choose?), and also have the option to turn it off. Lol, maybe we can call it "Taptics" instead of Haptics.
As for the LED's, I'll check with some of the other guys about what they can do. I do a lot of modding myself with other electronics (cars, motorcycles, game consoles, etc...), but I don't really get into programming all that much (although the logic makes sense to me).
-Paul
Okay, so I noticed the phone does vibrate, however, when using the keypad while in a call, it makes a different tone, and does not vibrate.
Also, is there any update on ways to make all buttons vibrate (and configurable) when pressed? And of course, an option to turn the feature off?
whiteblazer01 said:
Okay, so I noticed the phone does vibrate, however, when using the keypad while in a call, it makes a different tone, and does not vibrate.
Also, is there any update on ways to make all buttons vibrate (and configurable) when pressed? And of course, an option to turn the feature off?
Click to expand...
Click to collapse
I am not sure for all buttons but there is a CAB to make the phone vibrate when you press the screen. I tried it out and it works, but it's faulty and kills performance.
I'm still working on this project. I haven't had much time to work with it, but if any break through happens then I will post it up.
VAlert
Customize vibration on phone ring
This small program allows customizing vibration incoming call alerts.
Windows based phones vibrate either before the ring or constantly during the ring.
Having a short ringtone can possibly solve this problem, but with long mp3 ringtone the phone will constantly vibrate during the ring.
This program will enable Windows Mobile phones to produce short vibrations when the phone rings.
Vibration patterns can be easily changed by the user.
Possibly to match vibration patterns to the ringtone, so the phone will vibrate in a rhythm.
Very low (~4K) memory usage
This software is a freeware.
How to use
1. Install the CAB
2. Enjoy the program with default settings
3. The program is hidden by default. To display program window (if needed), run the program again
7. In Phone->Options make sure ring type is Vibrate and Ring
4. Edit script.txt to change vibration pattern. Every line in the file is a pair of vibration length and note pause
5. From the program window run Menu->Test to test the created pattern
6. Perform Menu->Hide to hide program window
What's new:
- More devices support, including non-HTC
- The installer executes the program upon installation (no soft reset required)
- No vibration on waiting call
- Support for incoming call ring mute (stop vibration)
- Silent start
- Even lower memory footprint - ~4K on standby (was 11K before)
sounds cool
gunna try now
you should make it so you tap the screen to show when u want it to vibrate instead of editing the .txt file
Edit: Great app but confusing to change the pattern
Edit2: lol doesnt seem to work on my vogue when i go to phone->options and press play its just a long vibrate
Ohh man i was about to post a thread on something like this. Thank you so much for making this!
Sounds nice. Will try it out. Thanks for sharing.
bedaweed said:
Edit2: lol doesnt seem to work on my vogue when i go to phone->options and press play its just a long vibrate
Click to expand...
Click to collapse
Play from phone options is not implemented. Open the program and click Menu->Test or just try an incoming call.
oh okay im gunna try now
hmm.it may be useful.thx.
bedaweed said:
you should make it so you tap the screen to show when u want it to vibrate instead of editing the .txt file
Edit: Great app but confusing to change the pattern
Click to expand...
Click to collapse
+ 100 i would guess
Downloading now,.
Thanks for sharing sir!
to save people the bother of working it out themselves, and to get everyone started...
here's my version of the Nokia classic message vibration
i can't hum it, so you'll need to try it, i guess!
Edit : Oh, by the way... is it possible to do something like this for recieving SMS / MMS / Email, or is that a different process altogether?
Dr J said:
Edit : Oh, by the way... is it possible to do something like this for recieving SMS / MMS / Email, or is that a different process altogether?
Click to expand...
Click to collapse
Yeah, that's what I wanted to ask too! Would be awesome, would be a very useful app, thanks. And yup, maybe an easier way to edit vibrates would be nice. However, it's cool now, for a version 1.
Future versions
Post your suggestions. I am making a list of changes for the next version.
Suggestions :
- a settings UI on the device (instead of having to pull the txt file off to PC and edit and then put back in on device)
- ability to change between multiple vibrate scripts (via drop-down menu or list?)
- if possible (?) ability to use vibrate scripts for SMS / MMS / Email / Other alerts
- vibe scripts that match pattern with the actual ring / message tone would be VERY cool
excellent little program, thanks a lot for the effort
if the other message alerts can be changed from within this (or even just another separate small app) it's just what i'm looking for!
and please can other people post their script efforts, it'd be good to have several pre-sets to start out with.
there might be a slight bug in this
a few calls have come through recently, the vibrate kicks in itself and the ringtone does not play for about 10 seconds or so.
also the programmed pattern seems distorted.
it might just be my device, as i'm noticing that S2U2's full screen call ID has been struggling to kick in when a call comes in these days since i started using Manilla2D as well.
it might be that the device is struggling to find the ID picture and the ringtone and the vibrate pattern at the same time, all the while trying to run M2D.
i'd check if it works correctly without all these extras running, but M2D and S2U2 are pretty much essentials for me these days.
anyone else care to help?
Dr J said:
there might be a slight bug in this
a few calls have come through recently, the vibrate kicks in itself and the ringtone does not play for about 10 seconds or so.
also the programmed pattern seems distorted.
it might just be my device, as i'm noticing that S2U2's full screen call ID has been struggling to kick in when a call comes in these days since i started using Manilla2D as well.
it might be that the device is struggling to find the ID picture and the ringtone and the vibrate pattern at the same time, all the while trying to run M2D.
i'd check if it works correctly without all these extras running, but M2D and S2U2 are pretty much essentials for me these days.
anyone else care to help?
Click to expand...
Click to collapse
Do you have this problem with all calls or just some?
What do you mean by distorted pattern?
Does this problem happens when VAlert is disabled?
Thanks works great on my prophet with 6.1
ochakov said:
Do you have this problem with all calls or just some?
What do you mean by distorted pattern?
Does this problem happens when VAlert is disabled?
Click to expand...
Click to collapse
i have that problem with calls but its only like 2 seconds not 10
Sounds nice. Will try it out. Thanks for sharing.
bedaweed said:
i have that problem with calls but its only like 2 seconds not 10
Click to expand...
Click to collapse
That's not a delay. By default (there is a registry setting to change it) the ring is delayed by 2 seconds. VAlert does not have that delay, so it will always start vibrating 2 seconds before the ring.
Nice tool... works goodm i like it!!!
I used to use s.e. W810, recently switched to xperia mini. Everything is pretty nice but the vibration level. It's barely sensible. When I have my phone in my jean pocket switched to silent mode, I feel nothing and when I check it to see whether there is any notification, usually I got ,say, 3 messages and 2 missing call
So, it's obvious that I don't feel the vibration. Searched a little about it, but neither could find anyone suffers from that problem like I do nor a solution to increase vibration level. However thought that maybe by reaching the phone's system files that can be feasible. So, is it possible to do that, if so, how ?
Thanks in advance.
I've not had a problem with it, but there are also apps to allow you to make your own vibration patterns. So maybe something with a bit more stop/start would help?
melenko said:
I've not had a problem with it, but there are also apps to allow you to make your own vibration patterns. So maybe something with a bit more stop/start would help?
Click to expand...
Click to collapse
Thanks for your suggestion but the problem is not the pattern but the level of the vibration definitely. I compared it with other phones and it's really not that high like old phones.
Go sms pro can help you define how many miliseconds the vibration for a notification for a new text should last. haven't used any app which can do the same for incoming calls, but it should exist somewhere in the market!
Actually what I'm looking for is to be able to increase the power of the motor inside the phone which creates those vibrations. This is adjustable for sure, cause for instance as typing it vibrates very slowly. So, by playing with codes they can be achieved, at least as theoretically
Can anyone help me i would like to change the bip sound always i touch galaxy... Dont have option to change..just for put mute :/
The sounds is in /system/media/audio/ui folder.
TW_Touch.ogg is the bip sound when you touch the screen
In this folder there are other sounds that are played by the various system programs (eg: Camera, unlock screen, battery level ecc.)
Thank you very much..i will see if i can change..look i can put an ogg file or i need to substitute for the other?
Sent from my GT-I9100 using XDA
Any .ogg file renamed to the proper name would work.
garf02 said:
The sounds is in /system/media/audio/ui folder.
TW_Touch.ogg is the bip sound when you touch the screen
In this folder there are other sounds that are played by the various system programs (eg: Camera, unlock screen, battery level ecc.)
Click to expand...
Click to collapse
This worked like gangbusters! I have been wondering how to do this for years! It was super easy!
Thanks!
There are a lot of things I want/need to do with the new update. No one is really talking about it, I know a lot of people probably haven't even updated yet. But I figured it would be nice to have a thread where these things can be addressed and updated as we get them done.
Xposed - The big one. Currently gets stuck in bootloop with the Unofficial version of Xposed for 5.1. Bootloop is easily fixed by running xposed-uninstaller in TWRP.
Change Phone DPI - currently working - *Requires Root* Change it how you usually do. Edit build.prop, or use an app like RomToolBox. I find that 264 works well and looks good. @xordos has a comprehensive guide here.
Apps don't auto-start after reboot - Partially fixed - *Requires Root*use a program like TitaniumBackup to install the apps you want to start at boot as a "system app". This will allow them to start after a reboot, but you will need to reconfigure them after you convert them. Do this for apps like Viper, over-clocking apps, and Tasker. Credit to @Iguanadon
3rd Party Launchers not sticking after reboot - Fixed - *Requires Root* All you have to do is freeze the stock launcher. Use a program like TitaniumBackup, find "Huawei Home" and freeze it. Make sure you have Nova or another Launcher installed first!
Battery Percentage in status bar - Until xposed is working there is a neat little app that allows you to have an overlay on your battery icon like this. It's not perfect, but it gets the job done. The app can be found here. Might want to leave accessibility access off, because it pops up a window everytime you plug or unplug the charger. Doesn't seem to start at boot. Could be annoying to launch the app every time you reboot...depends how often you do it.
Lockscreen - Stock one is horrible compared to stock lollipop. It is kind of pretty, but it takes multiple swipes to unlock sometimes, it doesn't show any notifications, its basically wasted space. I would like the stock Lollipop lockscreen. Anyone have any ideas besides the not so great one in the Playstore? I would rather have an official system lockscreen. On jellybean you just had to freeze the Huawei lockscreen. Now if you freeze Huawei Keyguard, the there is no lockscreen at all. Just the screen turns on and you're on your launcher home-screen. I tried finding the lockscreen app on a cm12 device, but it looks like it's built into the systemUI. I am currently using CM Locker. It's pretty nice, has notifications, and doesn't seem to have a delay like most 3rd party lockscreens.
Multitask screen - Again, I would like the stock Lollipop one, also built into the SystemUI. Once we have xposed, there is a pretty nice app here. Then you can assign the multitask button on your nav bar to open that instead. Worked well for me on jellybean.
The carrier text in the status bar - Fixed - Disabled in settings>display>display carrier name (thanks @xordos)
Boost speaker volume and possibly fix audio cut out bug - somewhat fixed - *Requires root* It's really quiet for some reason, considerably quieter than it was on Jellybean....I have had success with Viper4. Make sure you have BusyBox installed, and run it it at least once to install the framework. Then launch Viper4 and do all the stuff it tells you....Install driver, disable LPA, etc. Enable speaker master switch, enable "eXtra-loud" setting at the bottom, and change "Effect Strength" to Extreme. I noticed about a 20-30% volume increase from this. Might need to be launched again after a reboot, or install as system app. As a bonus, this app/driver also seems to fix the terrible audio bug where audio cuts out, and the phone starts lagging. Only 99% sure, but it hasn't happened to me while its active.
Change boot animation - Pretty standard guide I made here. This post includes the stock Lollipop animation.
If anyone has another thing or two they want fixed, I can add it here. If I find any answers I will update as well.
Carrier text, this can be disabled in settings - Display.
xordos said:
Carrier text, this can be disabled in settings - Display.
Click to expand...
Click to collapse
Nice, I was hoping something's would be easy.
Only launcher I have found with transparent navbar is Holo Launcher HD
Code:
[URL="https://play.google.com/store/apps/details?id=com.mobint.hololauncher.hd"]https://play.google.com/store/apps/details?id=com.mobint.hololauncher.hd[/URL]
The app "Browser" doesn't work at screen dpi 264 & 268. I've tried other higher values, however the soft menus at the bottom of the screen are not properly centered.
Is there a way to change app dpi without using xposed?
medwatt said:
The app "Browser" doesn't work at screen dpi 264 & 268. I've tried other higher values, however the soft menus at the bottom of the screen are not properly centered.
Is there a way to change app dpi without using xposed?
Click to expand...
Click to collapse
Nope. You can either keep upping the whole phone DPI little by little, or maybe use a different browser. I haven't noticed any discrepancies yet in my apps with 264.
ArkAngel06 said:
Nope. You can either keep upping the whole phone DPI little by little, or maybe use a different browser. I haven't noticed any discrepancies yet in my apps with 264.
Click to expand...
Click to collapse
Is the "browser" app launching in your phone?
medwatt said:
Is the "browser" app launching in your phone?
Click to expand...
Click to collapse
I'm at 240 dpi and it doesn't open for me.
Sent from my MT2L03 using Tapatalk
tdamocles said:
I'm at 240 dpi and it doesn't open for me.
Sent from my MT2L03 using Tapatalk
Click to expand...
Click to collapse
It opens at dpi 270+ but the soft buttons at the buttom of the screen are not centered!
medwatt said:
Is the "browser" app launching in your phone?
Click to expand...
Click to collapse
No, I just checked, it just crashes. I always freeze that app though.
Added a way to put the percentage in your battery icon in the status bar in the original post.
me 2, i never open the 'browser' till see above post, so I just tried it crash at my 240 dpi. Personally, I am using boat browser.
---------- Post added at 08:08 PM ---------- Previous post was at 08:02 PM ----------
ArkAngel06 said:
Added a way to put the percentage in your battery icon in the status bar in the original post.
Click to expand...
Click to collapse
Just in case you missed, the builtin percentage (settings - battery - show %) is there. But it is not inside the icon though.
xordos said:
Just in case you missed, the builtin percentage (settings - battery - show %) is there. But it is not inside the icon though.
Click to expand...
Click to collapse
Yeah, thanks. A little too big and bulky for me.
Volume Increase
Any way to increase the volume steps so that the audio is louder? I have the volume all the way up and sometimes I can't really hear what I'm listening to unless I hold the speaker to my ear or wear headphones. I was using an xposed module to do this, but until xposed becomes available is there anything that works to increase the volume so its louder? The xposed mod I was using is called Volumesteps+ and can be found at http://repo.xposed.info/module/com.p1ngu1n.volumesteps . any help would be appreciated.
robertbarber said:
Any way to increase the volume steps so that the audio is louder? I have the volume all the way up and sometimes I can't really hear what I'm listening to unless I hold the speaker to my ear or wear headphones. I was using an xposed module to do this, but until xposed becomes available is there anything that works to increase the volume so its louder? The xposed mod I was using is called Volumesteps+ and can be found at http://repo.xposed.info/module/com.p1ngu1n.volumesteps . any help would be appreciated.
Click to expand...
Click to collapse
I'm not sure how to install it on our new update, but I was using Viper4Android before the update. It is capable of making the volume even louder/quieter.
ScoobSTi said:
I'm not sure how to install it on our new update, but I was using Viper4Android before the update. It is capable of making the volume even louder/quieter.
Click to expand...
Click to collapse
I tried it when I had 4.3 and couldn't really tell any difference. I tried it again this morning with not much luck either. It just doesn't seem louder than what normal volume would be. I know its not going to be extremely loud. I just want something that I don't have to hold the phone to my ear to hear what they're saying. Also with viper it hasn't been setup for 5.1 yet only 5.0.
robertbarber said:
Any way to increase the volume steps so that the audio is louder? I have the volume all the way up and sometimes I can't really hear what I'm listening to unless I hold the speaker to my ear or wear headphones. I was using an xposed module to do this, but until xposed becomes available is there anything that works to increase the volume so its louder? The xposed mod I was using is called Volumesteps+ and can be found at http://repo.xposed.info/module/com.p1ngu1n.volumesteps . any help would be appreciated.
Click to expand...
Click to collapse
robertbarber said:
I tried it when I had 4.3 and couldn't really tell any difference. I tried it again this morning with not much luck either. It just doesn't seem louder than what normal volume would be. I know its not going to be extremely loud. I just want something that I don't have to hold the phone to my ear to hear what they're saying. Also with viper it hasn't been setup for 5.1 yet only 5.0.
Click to expand...
Click to collapse
On my nexus 5(which also had a horrible speaker), you could edit the mixer_paths.xml to boost the volume. I tried it on my Mate2, and couldn't really notice a difference.
After installing busybox, the viper4 driver, and disabling the LPA setting it recommends to, I can say Viper makes a noticeable difference for me. Probably about 25-30% louder.
Make sure you Enable the master switch at the top for speaker, and the "eXtra loud" setting at the bottom, and put Effect strength on Extreme.
Edit: Added my method to original post, with links.
Added boot animation guide.
ArcAngel, I have been trying mate 7 themes that were posted in the mate 7 xda forums. They are emui themes. They seem to work except that the fonts don't seem to load. In fact, I haven't been able to detect any font in the sdcard.
medwatt said:
ArcAngel, I have been trying mate 7 themes that were posted in the mate 7 xda forums. They are emui themes. They seem to work except that the fonts don't seem to load. In fact, I haven't been able to detect any font in the sdcard.
Click to expand...
Click to collapse
Do you have a link? I only see one Theme over there for 3.0, but it does look pretty nice.
Also updated original post with all the 3rd party launchers I have found with transparent nav/status bars. There's a lot, but none of the ones I would really like to use. Here's looking at you Nova/Apex. :crying: